comedi.h revision 90035c0886b256d75bced13b3b3cea5234aff136
1/* 2 include/comedi.h (installed as /usr/include/comedi.h) 3 header file for comedi 4 5 COMEDI - Linux Control and Measurement Device Interface 6 Copyright (C) 1998-2001 David A. Schleef <ds@schleef.org> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU Lesser General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 22*/ 23 24#ifndef _COMEDI_H 25#define _COMEDI_H 26 27#ifdef __cplusplus 28extern "C" { 29#endif 30 31#define COMEDI_MAJORVERSION 0 32#define COMEDI_MINORVERSION 7 33#define COMEDI_MICROVERSION 76 34#define VERSION "0.7.76" 35 36/* comedi's major device number */ 37#define COMEDI_MAJOR 98 38 39/* 40 maximum number of minor devices. This can be increased, although 41 kernel structures are currently statically allocated, thus you 42 don't want this to be much more than you actually use. 43 */ 44#define COMEDI_NDEVICES 16 45 46/* number of config options in the config structure */ 47#define COMEDI_NDEVCONFOPTS 32 48/*length of nth chunk of firmware data*/ 49#define COMEDI_DEVCONF_AUX_DATA3_LENGTH 25 50#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26 51#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27 52#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28 53#define COMEDI_DEVCONF_AUX_DATA_HI 29 /* most significant 32 bits of pointer address (if needed) */ 54#define COMEDI_DEVCONF_AUX_DATA_LO 30 /* least significant 32 bits of pointer address */ 55#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31 /* total data length */ 56 57/* max length of device and driver names */ 58#define COMEDI_NAMELEN 20 59 60/* packs and unpacks a channel/range number */ 61 62#define CR_PACK(chan, rng, aref) ((((aref)&0x3)<<24) | (((rng)&0xff)<<16) | (chan)) 63#define CR_PACK_FLAGS(chan, range, aref, flags) (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK)) 64 65#define CR_CHAN(a) ((a)&0xffff) 66#define CR_RANGE(a) (((a)>>16)&0xff) 67#define CR_AREF(a) (((a)>>24)&0x03) 68 69#define CR_FLAGS_MASK 0xfc000000 70#define CR_ALT_FILTER (1<<26) 71#define CR_DITHER CR_ALT_FILTER 72#define CR_DEGLITCH CR_ALT_FILTER 73#define CR_ALT_SOURCE (1<<27) 74#define CR_EDGE (1<<30) 75#define CR_INVERT (1<<31) 76 77#define AREF_GROUND 0x00 /* analog ref = analog ground */ 78#define AREF_COMMON 0x01 /* analog ref = analog common */ 79#define AREF_DIFF 0x02 /* analog ref = differential */ 80#define AREF_OTHER 0x03 /* analog ref = other (undefined) */ 81 82/* counters -- these are arbitrary values */ 83#define GPCT_RESET 0x0001 84#define GPCT_SET_SOURCE 0x0002 85#define GPCT_SET_GATE 0x0004 86#define GPCT_SET_DIRECTION 0x0008 87#define GPCT_SET_OPERATION 0x0010 88#define GPCT_ARM 0x0020 89#define GPCT_DISARM 0x0040 90#define GPCT_GET_INT_CLK_FRQ 0x0080 91 92#define GPCT_INT_CLOCK 0x0001 93#define GPCT_EXT_PIN 0x0002 94#define GPCT_NO_GATE 0x0004 95#define GPCT_UP 0x0008 96#define GPCT_DOWN 0x0010 97#define GPCT_HWUD 0x0020 98#define GPCT_SIMPLE_EVENT 0x0040 99#define GPCT_SINGLE_PERIOD 0x0080 100#define GPCT_SINGLE_PW 0x0100 101#define GPCT_CONT_PULSE_OUT 0x0200 102#define GPCT_SINGLE_PULSE_OUT 0x0400 103 104/* instructions */ 105 106#define INSN_MASK_WRITE 0x8000000 107#define INSN_MASK_READ 0x4000000 108#define INSN_MASK_SPECIAL 0x2000000 109 110#define INSN_READ (0 | INSN_MASK_READ) 111#define INSN_WRITE (1 | INSN_MASK_WRITE) 112#define INSN_BITS (2 | INSN_MASK_READ|INSN_MASK_WRITE) 113#define INSN_CONFIG (3 | INSN_MASK_READ|INSN_MASK_WRITE) 114#define INSN_GTOD (4 | INSN_MASK_READ|INSN_MASK_SPECIAL) 115#define INSN_WAIT (5 | INSN_MASK_WRITE|INSN_MASK_SPECIAL) 116#define INSN_INTTRIG (6 | INSN_MASK_WRITE|INSN_MASK_SPECIAL) 117 118/* trigger flags */ 119/* These flags are used in comedi_trig structures */ 120 121#define TRIG_BOGUS 0x0001 /* do the motions */ 122#define TRIG_DITHER 0x0002 /* enable dithering */ 123#define TRIG_DEGLITCH 0x0004 /* enable deglitching */ 124/*#define TRIG_RT 0x0008 */ /* perform op in real time */ 125#define TRIG_CONFIG 0x0010 /* perform configuration, not triggering */ 126#define TRIG_WAKE_EOS 0x0020 /* wake up on end-of-scan events */ 127/*#define TRIG_WRITE 0x0040*/ /* write to bidirectional devices */ 128 129/* command flags */ 130/* These flags are used in comedi_cmd structures */ 131 132#define CMDF_PRIORITY 0x00000008 /* try to use a real-time interrupt while performing command */ 133 134#define TRIG_RT CMDF_PRIORITY /* compatibility definition */ 135 136#define CMDF_WRITE 0x00000040 137#define TRIG_WRITE CMDF_WRITE /* compatibility definition */ 138 139#define CMDF_RAWDATA 0x00000080 140 141#define COMEDI_EV_START 0x00040000 142#define COMEDI_EV_SCAN_BEGIN 0x00080000 143#define COMEDI_EV_CONVERT 0x00100000 144#define COMEDI_EV_SCAN_END 0x00200000 145#define COMEDI_EV_STOP 0x00400000 146 147#define TRIG_ROUND_MASK 0x00030000 148#define TRIG_ROUND_NEAREST 0x00000000 149#define TRIG_ROUND_DOWN 0x00010000 150#define TRIG_ROUND_UP 0x00020000 151#define TRIG_ROUND_UP_NEXT 0x00030000 152 153/* trigger sources */ 154 155#define TRIG_ANY 0xffffffff 156#define TRIG_INVALID 0x00000000 157 158#define TRIG_NONE 0x00000001 /* never trigger */ 159#define TRIG_NOW 0x00000002 /* trigger now + N ns */ 160#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */ 161#define TRIG_TIME 0x00000008 /* trigger at time N ns */ 162#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */ 163#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */ 164#define TRIG_EXT 0x00000040 /* trigger on external signal N */ 165#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */ 166#define TRIG_OTHER 0x00000100 /* driver defined */ 167 168/* subdevice flags */ 169 170#define SDF_BUSY 0x0001 /* device is busy */ 171#define SDF_BUSY_OWNER 0x0002 /* device is busy with your job */ 172#define SDF_LOCKED 0x0004 /* subdevice is locked */ 173#define SDF_LOCK_OWNER 0x0008 /* you own lock */ 174#define SDF_MAXDATA 0x0010 /* maxdata depends on channel */ 175#define SDF_FLAGS 0x0020 /* flags depend on channel */ 176#define SDF_RANGETYPE 0x0040 /* range type depends on channel */ 177#define SDF_MODE0 0x0080 /* can do mode 0 */ 178#define SDF_MODE1 0x0100 /* can do mode 1 */ 179#define SDF_MODE2 0x0200 /* can do mode 2 */ 180#define SDF_MODE3 0x0400 /* can do mode 3 */ 181#define SDF_MODE4 0x0800 /* can do mode 4 */ 182#define SDF_CMD 0x1000 /* can do commands (deprecated) */ 183#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */ 184#define SDF_CMD_WRITE 0x4000 /* can do output commands */ 185#define SDF_CMD_READ 0x8000 /* can do input commands */ 186 187#define SDF_READABLE 0x00010000 /* subdevice can be read (e.g. analog input) */ 188#define SDF_WRITABLE 0x00020000 /* subdevice can be written (e.g. analog output) */ 189#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */ 190#define SDF_INTERNAL 0x00040000 /* subdevice does not have externally visible lines */ 191#define SDF_RT 0x00080000 /* DEPRECATED: subdevice is RT capable */ 192#define SDF_GROUND 0x00100000 /* can do aref=ground */ 193#define SDF_COMMON 0x00200000 /* can do aref=common */ 194#define SDF_DIFF 0x00400000 /* can do aref=diff */ 195#define SDF_OTHER 0x00800000 /* can do aref=other */ 196#define SDF_DITHER 0x01000000 /* can do dithering */ 197#define SDF_DEGLITCH 0x02000000 /* can do deglitching */ 198#define SDF_MMAP 0x04000000 /* can do mmap() */ 199#define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */ 200#define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */ 201#define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */ 202/* re recyle these flags for PWM */ 203#define SDF_PWM_COUNTER SDF_MODE0 /* PWM can automatically switch off */ 204#define SDF_PWM_HBRIDGE SDF_MODE1 /* PWM is signed (H-bridge) */ 205 206 207 208/* subdevice types */ 209 210enum comedi_subdevice_type { 211 COMEDI_SUBD_UNUSED, /* unused by driver */ 212 COMEDI_SUBD_AI, /* analog input */ 213 COMEDI_SUBD_AO, /* analog output */ 214 COMEDI_SUBD_DI, /* digital input */ 215 COMEDI_SUBD_DO, /* digital output */ 216 COMEDI_SUBD_DIO, /* digital input/output */ 217 COMEDI_SUBD_COUNTER, /* counter */ 218 COMEDI_SUBD_TIMER, /* timer */ 219 COMEDI_SUBD_MEMORY, /* memory, EEPROM, DPRAM */ 220 COMEDI_SUBD_CALIB, /* calibration DACs */ 221 COMEDI_SUBD_PROC, /* processor, DSP */ 222 COMEDI_SUBD_SERIAL, /* serial IO */ 223 COMEDI_SUBD_PWM /* PWM */ 224}; 225 226/* configuration instructions */ 227 228enum configuration_ids { 229 INSN_CONFIG_DIO_INPUT = 0, 230 INSN_CONFIG_DIO_OUTPUT = 1, 231 INSN_CONFIG_DIO_OPENDRAIN = 2, 232 INSN_CONFIG_ANALOG_TRIG = 16, 233/* INSN_CONFIG_WAVEFORM = 17, */ 234/* INSN_CONFIG_TRIG = 18, */ 235/* INSN_CONFIG_COUNTER = 19, */ 236 INSN_CONFIG_ALT_SOURCE = 20, 237 INSN_CONFIG_DIGITAL_TRIG = 21, 238 INSN_CONFIG_BLOCK_SIZE = 22, 239 INSN_CONFIG_TIMER_1 = 23, 240 INSN_CONFIG_FILTER = 24, 241 INSN_CONFIG_CHANGE_NOTIFY = 25, 242 243 /*ALPHA*/ INSN_CONFIG_SERIAL_CLOCK = 26, 244 INSN_CONFIG_BIDIRECTIONAL_DATA = 27, 245 INSN_CONFIG_DIO_QUERY = 28, 246 INSN_CONFIG_PWM_OUTPUT = 29, 247 INSN_CONFIG_GET_PWM_OUTPUT = 30, 248 INSN_CONFIG_ARM = 31, 249 INSN_CONFIG_DISARM = 32, 250 INSN_CONFIG_GET_COUNTER_STATUS = 33, 251 INSN_CONFIG_RESET = 34, 252 INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001, /* Use CTR as single pulsegenerator */ 253 INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002, /* Use CTR as pulsetraingenerator */ 254 INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003, /* Use the counter as encoder */ 255 INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */ 256 INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */ 257 INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */ 258 INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */ 259 INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */ 260/* INSN_CONFIG_GET_OTHER_SRC = 2006,*/ /* Get other source */ 261 INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of 262 subdevice's on-board 263 fifos used during 264 streaming 265 input/output */ 266 INSN_CONFIG_SET_COUNTER_MODE = 4097, 267 INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, /* deprecated */ 268 INSN_CONFIG_8254_READ_STATUS = 4098, 269 INSN_CONFIG_SET_ROUTING = 4099, 270 INSN_CONFIG_GET_ROUTING = 4109, 271/* PWM */ 272 INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */ 273 INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */ 274 INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */ 275 INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, /* sets H bridge: duty cycle and sign bit for a relay at the same time*/ 276 INSN_CONFIG_PWM_GET_H_BRIDGE = 5004 /* gets H bridge data: duty cycle and the sign bit */ 277}; 278 279enum comedi_io_direction { 280 COMEDI_INPUT = 0, 281 COMEDI_OUTPUT = 1, 282 COMEDI_OPENDRAIN = 2 283}; 284 285enum comedi_support_level { 286 COMEDI_UNKNOWN_SUPPORT = 0, 287 COMEDI_SUPPORTED, 288 COMEDI_UNSUPPORTED 289}; 290 291/* ioctls */ 292 293#define CIO 'd' 294#define COMEDI_DEVCONFIG _IOW(CIO, 0, comedi_devconfig) 295#define COMEDI_DEVINFO _IOR(CIO, 1, comedi_devinfo) 296#define COMEDI_SUBDINFO _IOR(CIO, 2, comedi_subdinfo) 297#define COMEDI_CHANINFO _IOR(CIO, 3, comedi_chaninfo) 298#define COMEDI_TRIG _IOWR(CIO, 4, comedi_trig) 299#define COMEDI_LOCK _IO(CIO, 5) 300#define COMEDI_UNLOCK _IO(CIO, 6) 301#define COMEDI_CANCEL _IO(CIO, 7) 302#define COMEDI_RANGEINFO _IOR(CIO, 8, comedi_rangeinfo) 303#define COMEDI_CMD _IOR(CIO, 9, struct comedi_cmd) 304#define COMEDI_CMDTEST _IOR(CIO, 10, struct comedi_cmd) 305#define COMEDI_INSNLIST _IOR(CIO, 11, comedi_insnlist) 306#define COMEDI_INSN _IOR(CIO, 12, struct comedi_insn) 307#define COMEDI_BUFCONFIG _IOR(CIO, 13, comedi_bufconfig) 308#define COMEDI_BUFINFO _IOWR(CIO, 14, comedi_bufinfo) 309#define COMEDI_POLL _IO(CIO, 15) 310 311/* structures */ 312 313typedef struct comedi_insnlist_struct comedi_insnlist; 314typedef struct comedi_chaninfo_struct comedi_chaninfo; 315typedef struct comedi_subdinfo_struct comedi_subdinfo; 316typedef struct comedi_devinfo_struct comedi_devinfo; 317typedef struct comedi_devconfig_struct comedi_devconfig; 318typedef struct comedi_rangeinfo_struct comedi_rangeinfo; 319typedef struct comedi_krange_struct comedi_krange; 320typedef struct comedi_bufconfig_struct comedi_bufconfig; 321typedef struct comedi_bufinfo_struct comedi_bufinfo; 322 323struct comedi_trig { 324 unsigned int subdev; /* subdevice */ 325 unsigned int mode; /* mode */ 326 unsigned int flags; 327 unsigned int n_chan; /* number of channels */ 328 unsigned int *chanlist; /* channel/range list */ 329 short *data; /* data list, size depends on subd flags */ 330 unsigned int n; /* number of scans */ 331 unsigned int trigsrc; 332 unsigned int trigvar; 333 unsigned int trigvar1; 334 unsigned int data_len; 335 unsigned int unused[3]; 336}; 337 338struct comedi_insn { 339 unsigned int insn; 340 unsigned int n; 341 unsigned int *data; 342 unsigned int subdev; 343 unsigned int chanspec; 344 unsigned int unused[3]; 345}; 346 347struct comedi_insnlist_struct { 348 unsigned int n_insns; 349 struct comedi_insn *insns; 350}; 351 352struct comedi_cmd { 353 unsigned int subdev; 354 unsigned int flags; 355 356 unsigned int start_src; 357 unsigned int start_arg; 358 359 unsigned int scan_begin_src; 360 unsigned int scan_begin_arg; 361 362 unsigned int convert_src; 363 unsigned int convert_arg; 364 365 unsigned int scan_end_src; 366 unsigned int scan_end_arg; 367 368 unsigned int stop_src; 369 unsigned int stop_arg; 370 371 unsigned int *chanlist; /* channel/range list */ 372 unsigned int chanlist_len; 373 374 short *data; /* data list, size depends on subd flags */ 375 unsigned int data_len; 376}; 377 378struct comedi_chaninfo_struct { 379 unsigned int subdev; 380 unsigned int *maxdata_list; 381 unsigned int *flaglist; 382 unsigned int *rangelist; 383 unsigned int unused[4]; 384}; 385 386struct comedi_rangeinfo_struct { 387 unsigned int range_type; 388 void *range_ptr; 389}; 390 391struct comedi_krange_struct { 392 int min; /* fixed point, multiply by 1e-6 */ 393 int max; /* fixed point, multiply by 1e-6 */ 394 unsigned int flags; 395}; 396 397 398struct comedi_subdinfo_struct { 399 unsigned int type; 400 unsigned int n_chan; 401 unsigned int subd_flags; 402 unsigned int timer_type; 403 unsigned int len_chanlist; 404 unsigned int maxdata; 405 unsigned int flags; /* channel flags */ 406 unsigned int range_type; /* lookup in kernel */ 407 unsigned int settling_time_0; 408 unsigned insn_bits_support; /* see support_level enum for values*/ 409 unsigned int unused[8]; 410}; 411 412struct comedi_devinfo_struct { 413 unsigned int version_code; 414 unsigned int n_subdevs; 415 char driver_name[COMEDI_NAMELEN]; 416 char board_name[COMEDI_NAMELEN]; 417 int read_subdevice; 418 int write_subdevice; 419 int unused[30]; 420}; 421 422struct comedi_devconfig_struct { 423 char board_name[COMEDI_NAMELEN]; 424 int options[COMEDI_NDEVCONFOPTS]; 425}; 426 427struct comedi_bufconfig_struct { 428 unsigned int subdevice; 429 unsigned int flags; 430 431 unsigned int maximum_size; 432 unsigned int size; 433 434 unsigned int unused[4]; 435}; 436 437struct comedi_bufinfo_struct { 438 unsigned int subdevice; 439 unsigned int bytes_read; 440 441 unsigned int buf_write_ptr; 442 unsigned int buf_read_ptr; 443 unsigned int buf_write_count; 444 unsigned int buf_read_count; 445 446 unsigned int bytes_written; 447 448 unsigned int unused[4]; 449}; 450 451/* range stuff */ 452 453#define __RANGE(a, b) ((((a)&0xffff)<<16)|((b)&0xffff)) 454 455#define RANGE_OFFSET(a) (((a)>>16)&0xffff) 456#define RANGE_LENGTH(b) ((b)&0xffff) 457 458#define RF_UNIT(flags) ((flags)&0xff) 459#define RF_EXTERNAL (1<<8) 460 461#define UNIT_volt 0 462#define UNIT_mA 1 463#define UNIT_none 2 464 465#define COMEDI_MIN_SPEED ((unsigned int)0xffffffff) 466 467/* callback stuff */ 468/* only relevant to kernel modules. */ 469 470#define COMEDI_CB_EOS 1 /* end of scan */ 471#define COMEDI_CB_EOA 2 /* end of acquisition */ 472#define COMEDI_CB_BLOCK 4 /* DEPRECATED: convenient block size */ 473#define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ 474#define COMEDI_CB_ERROR 16 /* card error during acquisition */ 475#define COMEDI_CB_OVERFLOW 32 /* buffer overflow/underflow */ 476 477/**********************************************************/ 478/* everything after this line is ALPHA */ 479/**********************************************************/ 480 481/* 482 8254 specific configuration. 483 484 It supports two config commands: 485 486 0 ID: INSN_CONFIG_SET_COUNTER_MODE 487 1 8254 Mode 488 I8254_MODE0, I8254_MODE1, ..., I8254_MODE5 489 OR'ed with: 490 I8254_BCD, I8254_BINARY 491 492 0 ID: INSN_CONFIG_8254_READ_STATUS 493 1 <-- Status byte returned here. 494 B7 = Output 495 B6 = NULL Count 496 B5 - B0 Current mode. 497 498*/ 499 500enum i8254_mode { 501 I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */ 502 I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */ 503 I8254_MODE2 = (2 << 1), /* Rate generator */ 504 I8254_MODE3 = (3 << 1), /* Square wave mode */ 505 I8254_MODE4 = (4 << 1), /* Software triggered strobe */ 506 I8254_MODE5 = (5 << 1), /* Hardware triggered strobe (retriggerable) */ 507 I8254_BCD = 1, /* use binary-coded decimal instead of binary (pretty useless) */ 508 I8254_BINARY = 0 509}; 510 511static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel) 512{ 513 if (pfi_channel < 10) 514 return 0x1 + pfi_channel; 515 else 516 return 0xb + pfi_channel; 517} 518static inline unsigned NI_USUAL_RTSI_SELECT(unsigned rtsi_channel) 519{ 520 if (rtsi_channel < 7) 521 return 0xb + rtsi_channel; 522 else 523 return 0x1b; 524} 525/* mode bits for NI general-purpose counters, set with 526 * INSN_CONFIG_SET_COUNTER_MODE */ 527#define NI_GPCT_COUNTING_MODE_SHIFT 16 528#define NI_GPCT_INDEX_PHASE_BITSHIFT 20 529#define NI_GPCT_COUNTING_DIRECTION_SHIFT 24 530enum ni_gpct_mode_bits { 531 NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4, 532 NI_GPCT_EDGE_GATE_MODE_MASK = 0x18, 533 NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0, 534 NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8, 535 NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10, 536 NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18, 537 NI_GPCT_STOP_MODE_MASK = 0x60, 538 NI_GPCT_STOP_ON_GATE_BITS = 0x00, 539 NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20, 540 NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40, 541 NI_GPCT_LOAD_B_SELECT_BIT = 0x80, 542 NI_GPCT_OUTPUT_MODE_MASK = 0x300, 543 NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100, 544 NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200, 545 NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300, 546 NI_GPCT_HARDWARE_DISARM_MASK = 0xc00, 547 NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000, 548 NI_GPCT_DISARM_AT_TC_BITS = 0x400, 549 NI_GPCT_DISARM_AT_GATE_BITS = 0x800, 550 NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00, 551 NI_GPCT_LOADING_ON_TC_BIT = 0x1000, 552 NI_GPCT_LOADING_ON_GATE_BIT = 0x4000, 553 NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT, 554 NI_GPCT_COUNTING_MODE_NORMAL_BITS = 555 0x0 << NI_GPCT_COUNTING_MODE_SHIFT, 556 NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS = 557 0x1 << NI_GPCT_COUNTING_MODE_SHIFT, 558 NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS = 559 0x2 << NI_GPCT_COUNTING_MODE_SHIFT, 560 NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS = 561 0x3 << NI_GPCT_COUNTING_MODE_SHIFT, 562 NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS = 563 0x4 << NI_GPCT_COUNTING_MODE_SHIFT, 564 NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS = 565 0x6 << NI_GPCT_COUNTING_MODE_SHIFT, 566 NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, 567 NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS = 568 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT, 569 NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS = 570 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT, 571 NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS = 572 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT, 573 NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS = 574 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, 575 NI_GPCT_INDEX_ENABLE_BIT = 0x400000, 576 NI_GPCT_COUNTING_DIRECTION_MASK = 577 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, 578 NI_GPCT_COUNTING_DIRECTION_DOWN_BITS = 579 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT, 580 NI_GPCT_COUNTING_DIRECTION_UP_BITS = 581 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT, 582 NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS = 583 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT, 584 NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS = 585 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, 586 NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000, 587 NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0, 588 NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000, 589 NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000, 590 NI_GPCT_OR_GATE_BIT = 0x10000000, 591 NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000 592}; 593 594/* Bits for setting a clock source with 595 * INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters. */ 596enum ni_gpct_clock_source_bits { 597 NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f, 598 NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0, 599 NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1, 600 NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2, 601 NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3, 602 NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4, 603 NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5, 604 NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6, /* NI 660x-specific */ 605 NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7, 606 NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8, 607 NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9, 608 NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000, 609 NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0, 610 NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000, /* divide source by 2 */ 611 NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000, /* divide source by 8 */ 612 NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000 613}; 614static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n) 615{ 616 /* NI 660x-specific */ 617 return 0x10 + n; 618} 619static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n) 620{ 621 return 0x18 + n; 622} 623static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n) 624{ 625 /* no pfi on NI 660x */ 626 return 0x20 + n; 627} 628 629/* Possibilities for setting a gate source with 630INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters. 631May be bitwise-or'd with CR_EDGE or CR_INVERT. */ 632enum ni_gpct_gate_select { 633 /* m-series gates */ 634 NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0, 635 NI_GPCT_AI_START2_GATE_SELECT = 0x12, 636 NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13, 637 NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14, 638 NI_GPCT_AI_START1_GATE_SELECT = 0x1c, 639 NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d, 640 NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e, 641 NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f, 642 /* more gates for 660x */ 643 NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100, 644 NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101, 645 /* more gates for 660x "second gate" */ 646 NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201, 647 NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e, 648 /* m-series "second gate" sources are unknown, 649 we should add them here with an offset of 0x300 when known. */ 650 NI_GPCT_DISABLED_GATE_SELECT = 0x8000, 651}; 652static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n) 653{ 654 return 0x102 + n; 655} 656static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n) 657{ 658 return NI_USUAL_RTSI_SELECT(n); 659} 660static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n) 661{ 662 return NI_USUAL_PFI_SELECT(n); 663} 664static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n) 665{ 666 return 0x202 + n; 667} 668 669/* Possibilities for setting a source with 670INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. */ 671enum ni_gpct_other_index { 672 NI_GPCT_SOURCE_ENCODER_A, 673 NI_GPCT_SOURCE_ENCODER_B, 674 NI_GPCT_SOURCE_ENCODER_Z 675}; 676enum ni_gpct_other_select { 677 /* m-series gates */ 678 /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */ 679 NI_GPCT_DISABLED_OTHER_SELECT = 0x8000, 680}; 681static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n) 682{ 683 return NI_USUAL_PFI_SELECT(n); 684} 685 686/* start sources for ni general-purpose counters for use with 687INSN_CONFIG_ARM */ 688enum ni_gpct_arm_source { 689 NI_GPCT_ARM_IMMEDIATE = 0x0, 690 NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter and 691 the adjacent paired counter 692 simultaneously */ 693 /* NI doesn't document bits for selecting hardware arm triggers. If 694 * the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least 695 * significant bits (3 bits for 660x or 5 bits for m-series) through to 696 * the hardware. This will at least allow someone to figure out what 697 * the bits do later. */ 698 NI_GPCT_ARM_UNKNOWN = 0x1000, 699}; 700 701/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */ 702enum ni_gpct_filter_select { 703 NI_GPCT_FILTER_OFF = 0x0, 704 NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1, 705 NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2, 706 NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3, 707 NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4, 708 NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5, 709 NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6 710}; 711 712/* PFI digital filtering options for ni m-series for use with 713 * INSN_CONFIG_FILTER. */ 714enum ni_pfi_filter_select { 715 NI_PFI_FILTER_OFF = 0x0, 716 NI_PFI_FILTER_125ns = 0x1, 717 NI_PFI_FILTER_6425ns = 0x2, 718 NI_PFI_FILTER_2550us = 0x3 719}; 720 721/* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */ 722enum ni_mio_clock_source { 723 NI_MIO_INTERNAL_CLOCK = 0, 724 NI_MIO_RTSI_CLOCK = 1, /* doesn't work for m-series, use 725 NI_MIO_PLL_RTSI_CLOCK() */ 726 /* the NI_MIO_PLL_* sources are m-series only */ 727 NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2, 728 NI_MIO_PLL_PXI10_CLOCK = 3, 729 NI_MIO_PLL_RTSI0_CLOCK = 4 730}; 731static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel) 732{ 733 return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel; 734} 735 736/* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING. 737 The numbers assigned are not arbitrary, they correspond to the bits required 738 to program the board. */ 739enum ni_rtsi_routing { 740 NI_RTSI_OUTPUT_ADR_START1 = 0, 741 NI_RTSI_OUTPUT_ADR_START2 = 1, 742 NI_RTSI_OUTPUT_SCLKG = 2, 743 NI_RTSI_OUTPUT_DACUPDN = 3, 744 NI_RTSI_OUTPUT_DA_START1 = 4, 745 NI_RTSI_OUTPUT_G_SRC0 = 5, 746 NI_RTSI_OUTPUT_G_GATE0 = 6, 747 NI_RTSI_OUTPUT_RGOUT0 = 7, 748 NI_RTSI_OUTPUT_RTSI_BRD_0 = 8, 749 NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI clock 750 on line 7 */ 751}; 752static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n) 753{ 754 return NI_RTSI_OUTPUT_RTSI_BRD_0 + n; 755} 756 757/* Signals which can be routed to an NI PFI pin on an m-series board with 758 * INSN_CONFIG_SET_ROUTING. These numbers are also returned by 759 * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing 760 * cannot be changed. The numbers assigned are not arbitrary, they correspond 761 * to the bits required to program the board. */ 762enum ni_pfi_routing { 763 NI_PFI_OUTPUT_PFI_DEFAULT = 0, 764 NI_PFI_OUTPUT_AI_START1 = 1, 765 NI_PFI_OUTPUT_AI_START2 = 2, 766 NI_PFI_OUTPUT_AI_CONVERT = 3, 767 NI_PFI_OUTPUT_G_SRC1 = 4, 768 NI_PFI_OUTPUT_G_GATE1 = 5, 769 NI_PFI_OUTPUT_AO_UPDATE_N = 6, 770 NI_PFI_OUTPUT_AO_START1 = 7, 771 NI_PFI_OUTPUT_AI_START_PULSE = 8, 772 NI_PFI_OUTPUT_G_SRC0 = 9, 773 NI_PFI_OUTPUT_G_GATE0 = 10, 774 NI_PFI_OUTPUT_EXT_STROBE = 11, 775 NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12, 776 NI_PFI_OUTPUT_GOUT0 = 13, 777 NI_PFI_OUTPUT_GOUT1 = 14, 778 NI_PFI_OUTPUT_FREQ_OUT = 15, 779 NI_PFI_OUTPUT_PFI_DO = 16, 780 NI_PFI_OUTPUT_I_ATRIG = 17, 781 NI_PFI_OUTPUT_RTSI0 = 18, 782 NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26, 783 NI_PFI_OUTPUT_SCXI_TRIG1 = 27, 784 NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28, 785 NI_PFI_OUTPUT_CDI_SAMPLE = 29, 786 NI_PFI_OUTPUT_CDO_UPDATE = 30 787}; 788static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel) 789{ 790 return NI_PFI_OUTPUT_RTSI0 + rtsi_channel; 791} 792 793/* Signals which can be routed to output on a NI PFI pin on a 660x board 794 with INSN_CONFIG_SET_ROUTING. The numbers assigned are 795 not arbitrary, they correspond to the bits required 796 to program the board. Lines 0 to 7 can only be set to 797 NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to 798 NI_660X_PFI_OUTPUT_COUNTER. */ 799enum ni_660x_pfi_routing { 800 NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */ 801 NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */ 802}; 803 804/* NI External Trigger lines. These values are not arbitrary, but are related 805 * to the bits required to program the board (offset by 1 for historical 806 * reasons). */ 807static inline unsigned NI_EXT_PFI(unsigned pfi_channel) 808{ 809 return NI_USUAL_PFI_SELECT(pfi_channel) - 1; 810} 811static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel) 812{ 813 return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1; 814} 815 816/* status bits for INSN_CONFIG_GET_COUNTER_STATUS */ 817enum comedi_counter_status_flags { 818 COMEDI_COUNTER_ARMED = 0x1, 819 COMEDI_COUNTER_COUNTING = 0x2, 820 COMEDI_COUNTER_TERMINAL_COUNT = 0x4, 821}; 822 823/* Clock sources for CDIO subdevice on NI m-series boards. Used as the 824 * scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd 825 * with CR_INVERT to change polarity. */ 826enum ni_m_series_cdio_scan_begin_src { 827 NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0, 828 NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18, 829 NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19, 830 NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20, 831 NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28, 832 NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29, 833 NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30, 834 NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31, 835 NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32, 836 NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33 837}; 838static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) 839{ 840 return NI_USUAL_PFI_SELECT(pfi_channel); 841} 842static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) 843{ 844 return NI_USUAL_RTSI_SELECT(rtsi_channel); 845} 846 847/* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI 848 * boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to 849 * change polarity. */ 850static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) 851{ 852 return NI_USUAL_PFI_SELECT(pfi_channel); 853} 854static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) 855{ 856 return NI_USUAL_RTSI_SELECT(rtsi_channel); 857} 858 859/* Bits for setting a clock source with 860 * INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice. */ 861enum ni_freq_out_clock_source_bits { 862 NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */ 863 NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */ 864}; 865 866/* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for 867 * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */ 868 enum amplc_dio_clock_source { 869 AMPLC_DIO_CLK_CLKN, /* per channel external clock 870 input/output pin (pin is only an 871 input when clock source set to this 872 value, otherwise it is an output) */ 873 AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */ 874 AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */ 875 AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */ 876 AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */ 877 AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */ 878 AMPLC_DIO_CLK_OUTNM1, /* output of preceding counter channel 879 (for channel 0, preceding counter 880 channel is channel 2 on preceding 881 counter subdevice, for first counter 882 subdevice, preceding counter 883 subdevice is the last counter 884 subdevice) */ 885 AMPLC_DIO_CLK_EXT /* per chip external input pin */ 886 }; 887 888/* Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for 889 * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */ 890 enum amplc_dio_gate_source { 891 AMPLC_DIO_GAT_VCC, /* internal high logic level */ 892 AMPLC_DIO_GAT_GND, /* internal low logic level */ 893 AMPLC_DIO_GAT_GATN, /* per channel external gate input */ 894 AMPLC_DIO_GAT_NOUTNM2, /* negated output of counter channel 895 minus 2 (for channels 0 or 1, 896 channel minus 2 is channel 1 or 2 on 897 the preceding counter subdevice, for 898 the first counter subdevice the 899 preceding counter subdevice is the 900 last counter subdevice) */ 901 AMPLC_DIO_GAT_RESERVED4, 902 AMPLC_DIO_GAT_RESERVED5, 903 AMPLC_DIO_GAT_RESERVED6, 904 AMPLC_DIO_GAT_RESERVED7 905 }; 906 907#ifdef __cplusplus 908} 909#endif 910 911#endif /* _COMEDI_H */ 912