cb_pcidda.c revision 2696fb57e6af653dd8b4df41b16754579f42fc78
1/* 2 comedi/drivers/cb_pcidda.c 3 This intends to be a driver for the ComputerBoards / MeasurementComputing 4 PCI-DDA series. 5 6 Copyright (C) 2001 Ivan Martinez <ivanmr@altavista.com> 7 Copyright (C) 2001 Frank Mori Hess <fmhess@users.sourceforge.net> 8 9 COMEDI - Linux Control and Measurement Device Interface 10 Copyright (C) 1997-8 David A. Schleef <ds@schleef.org> 11 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; either version 2 of the License, or 15 (at your option) any later version. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 You should have received a copy of the GNU General Public License 23 along with this program; if not, write to the Free Software 24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 26*/ 27/* 28Driver: cb_pcidda 29Description: MeasurementComputing PCI-DDA series 30Author: Ivan Martinez <ivanmr@altavista.com>, Frank Mori Hess <fmhess@users.sourceforge.net> 31Status: Supports 08/16, 04/16, 02/16, 08/12, 04/12, and 02/12 32Devices: [Measurement Computing] PCI-DDA08/12 (cb_pcidda), PCI-DDA04/12, 33 PCI-DDA02/12, PCI-DDA08/16, PCI-DDA04/16, PCI-DDA02/16 34 35Configuration options: 36 [0] - PCI bus of device (optional) 37 [1] - PCI slot of device (optional) 38 If bus/slot is not specified, the first available PCI 39 device will be used. 40 41Only simple analog output writing is supported. 42 43So far it has only been tested with: 44 - PCI-DDA08/12 45Please report success/failure with other different cards to 46<comedi@comedi.org>. 47*/ 48 49#include "../comedidev.h" 50 51#include "comedi_pci.h" 52#include "8255.h" 53 54#define PCI_VENDOR_ID_CB 0x1307 /* PCI vendor number of ComputerBoards */ 55#define N_BOARDS 10 /* Number of boards in cb_pcidda_boards */ 56#define EEPROM_SIZE 128 /* number of entries in eeprom */ 57#define MAX_AO_CHANNELS 8 /* maximum number of ao channels for supported boards */ 58 59/* PCI-DDA base addresses */ 60#define DIGITALIO_BADRINDEX 2 61 /* DIGITAL I/O is pci_dev->resource[2] */ 62#define DIGITALIO_SIZE 8 63 /* DIGITAL I/O uses 8 I/O port addresses */ 64#define DAC_BADRINDEX 3 65 /* DAC is pci_dev->resource[3] */ 66 67/* Digital I/O registers */ 68#define PORT1A 0 /* PORT 1A DATA */ 69 70#define PORT1B 1 /* PORT 1B DATA */ 71 72#define PORT1C 2 /* PORT 1C DATA */ 73 74#define CONTROL1 3 /* CONTROL REGISTER 1 */ 75 76#define PORT2A 4 /* PORT 2A DATA */ 77 78#define PORT2B 5 /* PORT 2B DATA */ 79 80#define PORT2C 6 /* PORT 2C DATA */ 81 82#define CONTROL2 7 /* CONTROL REGISTER 2 */ 83 84/* DAC registers */ 85#define DACONTROL 0 /* D/A CONTROL REGISTER */ 86#define SU 0000001 /* Simultaneous update enabled */ 87#define NOSU 0000000 /* Simultaneous update disabled */ 88#define ENABLEDAC 0000002 /* Enable specified DAC */ 89#define DISABLEDAC 0000000 /* Disable specified DAC */ 90#define RANGE2V5 0000000 /* 2.5V */ 91#define RANGE5V 0000200 /* 5V */ 92#define RANGE10V 0000300 /* 10V */ 93#define UNIP 0000400 /* Unipolar outputs */ 94#define BIP 0000000 /* Bipolar outputs */ 95 96#define DACALIBRATION1 4 /* D/A CALIBRATION REGISTER 1 */ 97/* write bits */ 98#define SERIAL_IN_BIT 0x1 /* serial data input for eeprom, caldacs, reference dac */ 99#define CAL_CHANNEL_MASK (0x7 << 1) 100#define CAL_CHANNEL_BITS(channel) (((channel) << 1) & CAL_CHANNEL_MASK) 101/* read bits */ 102#define CAL_COUNTER_MASK 0x1f 103#define CAL_COUNTER_OVERFLOW_BIT 0x20 /* calibration counter overflow status bit */ 104#define AO_BELOW_REF_BIT 0x40 /* analog output is less than reference dac voltage */ 105#define SERIAL_OUT_BIT 0x80 /* serial data out, for reading from eeprom */ 106 107#define DACALIBRATION2 6 /* D/A CALIBRATION REGISTER 2 */ 108#define SELECT_EEPROM_BIT 0x1 /* send serial data in to eeprom */ 109#define DESELECT_REF_DAC_BIT 0x2 /* don't send serial data to MAX542 reference dac */ 110#define DESELECT_CALDAC_BIT(n) (0x4 << (n)) /* don't send serial data to caldac n */ 111#define DUMMY_BIT 0x40 /* manual says to set this bit with no explanation */ 112 113#define DADATA 8 /* FIRST D/A DATA REGISTER (0) */ 114 115static const struct comedi_lrange cb_pcidda_ranges = { 116 6, 117 { 118 BIP_RANGE(10), 119 BIP_RANGE(5), 120 BIP_RANGE(2.5), 121 UNI_RANGE(10), 122 UNI_RANGE(5), 123 UNI_RANGE(2.5), 124 } 125}; 126 127/* 128 * Board descriptions for two imaginary boards. Describing the 129 * boards in this way is optional, and completely driver-dependent. 130 * Some drivers use arrays such as this, other do not. 131 */ 132struct cb_pcidda_board { 133 const char *name; 134 char status; /* Driver status: */ 135 136 /* 137 * 0 - tested 138 * 1 - manual read, not tested 139 * 2 - manual not read 140 */ 141 142 unsigned short device_id; 143 int ao_chans; 144 int ao_bits; 145 const struct comedi_lrange *ranges; 146}; 147 148static const struct cb_pcidda_board cb_pcidda_boards[] = { 149 { 150 name: "pci-dda02/12", 151 status: 1, 152 device_id:0x20, 153 ao_chans:2, 154 ao_bits: 12, 155 ranges: &cb_pcidda_ranges, 156 }, 157 { 158 name: "pci-dda04/12", 159 status: 1, 160 device_id:0x21, 161 ao_chans:4, 162 ao_bits: 12, 163 ranges: &cb_pcidda_ranges, 164 }, 165 { 166 name: "pci-dda08/12", 167 status: 0, 168 device_id:0x22, 169 ao_chans:8, 170 ao_bits: 12, 171 ranges: &cb_pcidda_ranges, 172 }, 173 { 174 name: "pci-dda02/16", 175 status: 2, 176 device_id:0x23, 177 ao_chans:2, 178 ao_bits: 16, 179 ranges: &cb_pcidda_ranges, 180 }, 181 { 182 name: "pci-dda04/16", 183 status: 2, 184 device_id:0x24, 185 ao_chans:4, 186 ao_bits: 16, 187 ranges: &cb_pcidda_ranges, 188 }, 189 { 190 name: "pci-dda08/16", 191 status: 0, 192 device_id:0x25, 193 ao_chans:8, 194 ao_bits: 16, 195 ranges: &cb_pcidda_ranges, 196 }, 197}; 198 199static DEFINE_PCI_DEVICE_TABLE(cb_pcidda_pci_table) = { 200 {PCI_VENDOR_ID_CB, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 201 {PCI_VENDOR_ID_CB, 0x0021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 202 {PCI_VENDOR_ID_CB, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 203 {PCI_VENDOR_ID_CB, 0x0023, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 204 {PCI_VENDOR_ID_CB, 0x0024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 205 {PCI_VENDOR_ID_CB, 0x0025, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 206 {0} 207}; 208 209MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table); 210 211/* 212 * Useful for shorthand access to the particular board structure 213 */ 214#define thisboard ((const struct cb_pcidda_board *)dev->board_ptr) 215 216/* this structure is for data unique to this hardware driver. If 217 several hardware drivers keep similar information in this structure, 218 feel free to suggest moving the variable to the struct comedi_device struct. */ 219struct cb_pcidda_private { 220 int data; 221 222 /* would be useful for a PCI device */ 223 struct pci_dev *pci_dev; 224 225 unsigned long digitalio; 226 unsigned long dac; 227 228 /* unsigned long control_status; */ 229 /* unsigned long adc_fifo; */ 230 231 unsigned int dac_cal1_bits; /* bits last written to da calibration register 1 */ 232 unsigned int ao_range[MAX_AO_CHANNELS]; /* current range settings for output channels */ 233 u16 eeprom_data[EEPROM_SIZE]; /* software copy of board's eeprom */ 234}; 235 236/* 237 * most drivers define the following macro to make it easy to 238 * access the private structure. 239 */ 240#define devpriv ((struct cb_pcidda_private *)dev->private) 241 242static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig * it); 243static int cb_pcidda_detach(struct comedi_device * dev); 244/* static int cb_pcidda_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data); */ 245static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, 246 struct comedi_insn * insn, unsigned int * data); 247 248/* static int cb_pcidda_ai_cmd(struct comedi_device *dev, struct *comedi_subdevice *s);*/ 249/* static int cb_pcidda_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd); */ 250/* static int cb_pcidda_ns_to_timer(unsigned int *ns,int *round); */ 251 252static unsigned int cb_pcidda_serial_in(struct comedi_device * dev); 253static void cb_pcidda_serial_out(struct comedi_device * dev, unsigned int value, 254 unsigned int num_bits); 255static unsigned int cb_pcidda_read_eeprom(struct comedi_device * dev, 256 unsigned int address); 257static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel, 258 unsigned int range); 259 260/* 261 * The struct comedi_driver structure tells the Comedi core module 262 * which functions to call to configure/deconfigure (attach/detach) 263 * the board, and also about the kernel module that contains 264 * the device code. 265 */ 266static struct comedi_driver driver_cb_pcidda = { 267 driver_name:"cb_pcidda", 268 module:THIS_MODULE, 269 attach:cb_pcidda_attach, 270 detach:cb_pcidda_detach, 271}; 272 273/* 274 * Attach is called by the Comedi core to configure the driver 275 * for a particular board. 276 */ 277static int cb_pcidda_attach(struct comedi_device * dev, struct comedi_devconfig * it) 278{ 279 struct comedi_subdevice *s; 280 struct pci_dev *pcidev; 281 int index; 282 283 printk("comedi%d: cb_pcidda: ", dev->minor); 284 285/* 286 * Allocate the private structure area. 287 */ 288 if (alloc_private(dev, sizeof(struct cb_pcidda_private)) < 0) 289 return -ENOMEM; 290 291/* 292 * Probe the device to determine what device in the series it is. 293 */ 294 printk("\n"); 295 296 for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); 297 pcidev != NULL; 298 pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { 299 if (pcidev->vendor == PCI_VENDOR_ID_CB) { 300 if (it->options[0] || it->options[1]) { 301 if (pcidev->bus->number != it->options[0] || 302 PCI_SLOT(pcidev->devfn) != 303 it->options[1]) { 304 continue; 305 } 306 } 307 for (index = 0; index < N_BOARDS; index++) { 308 if (cb_pcidda_boards[index].device_id == 309 pcidev->device) { 310 goto found; 311 } 312 } 313 } 314 } 315 if (!pcidev) { 316 printk("Not a ComputerBoards/MeasurementComputing card on requested position\n"); 317 return -EIO; 318 } 319 found: 320 devpriv->pci_dev = pcidev; 321 dev->board_ptr = cb_pcidda_boards + index; 322 /* "thisboard" macro can be used from here. */ 323 printk("Found %s at requested position\n", thisboard->name); 324 325 /* 326 * Enable PCI device and request regions. 327 */ 328 if (comedi_pci_enable(pcidev, thisboard->name)) { 329 printk("cb_pcidda: failed to enable PCI device and request regions\n"); 330 return -EIO; 331 } 332 333/* 334 * Allocate the I/O ports. 335 */ 336 devpriv->digitalio = 337 pci_resource_start(devpriv->pci_dev, DIGITALIO_BADRINDEX); 338 devpriv->dac = pci_resource_start(devpriv->pci_dev, DAC_BADRINDEX); 339 340/* 341 * Warn about the status of the driver. 342 */ 343 if (thisboard->status == 2) 344 printk("WARNING: DRIVER FOR THIS BOARD NOT CHECKED WITH MANUAL. " "WORKS ASSUMING FULL COMPATIBILITY WITH PCI-DDA08/12. " "PLEASE REPORT USAGE TO <ivanmr@altavista.com>.\n"); 345 346/* 347 * Initialize dev->board_name. 348 */ 349 dev->board_name = thisboard->name; 350 351/* 352 * Allocate the subdevice structures. 353 */ 354 if (alloc_subdevices(dev, 3) < 0) 355 return -ENOMEM; 356 357 s = dev->subdevices + 0; 358 /* analog output subdevice */ 359 s->type = COMEDI_SUBD_AO; 360 s->subdev_flags = SDF_WRITABLE; 361 s->n_chan = thisboard->ao_chans; 362 s->maxdata = (1 << thisboard->ao_bits) - 1; 363 s->range_table = thisboard->ranges; 364 s->insn_write = cb_pcidda_ao_winsn; 365 366 /* s->subdev_flags |= SDF_CMD_READ; */ 367 /* s->do_cmd = cb_pcidda_ai_cmd; */ 368 /* s->do_cmdtest = cb_pcidda_ai_cmdtest; */ 369 370 /* two 8255 digital io subdevices */ 371 s = dev->subdevices + 1; 372 subdev_8255_init(dev, s, NULL, devpriv->digitalio); 373 s = dev->subdevices + 2; 374 subdev_8255_init(dev, s, NULL, devpriv->digitalio + PORT2A); 375 376 printk(" eeprom:"); 377 for (index = 0; index < EEPROM_SIZE; index++) { 378 devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index); 379 printk(" %i:0x%x ", index, devpriv->eeprom_data[index]); 380 } 381 printk("\n"); 382 383 /* set calibrations dacs */ 384 for (index = 0; index < thisboard->ao_chans; index++) 385 cb_pcidda_calibrate(dev, index, devpriv->ao_range[index]); 386 387 return 1; 388} 389 390/* 391 * _detach is called to deconfigure a device. It should deallocate 392 * resources. 393 * This function is also called when _attach() fails, so it should be 394 * careful not to release resources that were not necessarily 395 * allocated by _attach(). dev->private and dev->subdevices are 396 * deallocated automatically by the core. 397 */ 398static int cb_pcidda_detach(struct comedi_device * dev) 399{ 400/* 401 * Deallocate the I/O ports. 402 */ 403 if (devpriv) { 404 if (devpriv->pci_dev) { 405 if (devpriv->dac) { 406 comedi_pci_disable(devpriv->pci_dev); 407 } 408 pci_dev_put(devpriv->pci_dev); 409 } 410 } 411 /* cleanup 8255 */ 412 if (dev->subdevices) { 413 subdev_8255_cleanup(dev, dev->subdevices + 1); 414 subdev_8255_cleanup(dev, dev->subdevices + 2); 415 } 416 417 printk("comedi%d: cb_pcidda: remove\n", dev->minor); 418 419 return 0; 420} 421 422/* 423 * I will program this later... ;-) 424 */ 425#if 0 426static int cb_pcidda_ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) 427{ 428 printk("cb_pcidda_ai_cmd\n"); 429 printk("subdev: %d\n", cmd->subdev); 430 printk("flags: %d\n", cmd->flags); 431 printk("start_src: %d\n", cmd->start_src); 432 printk("start_arg: %d\n", cmd->start_arg); 433 printk("scan_begin_src: %d\n", cmd->scan_begin_src); 434 printk("convert_src: %d\n", cmd->convert_src); 435 printk("convert_arg: %d\n", cmd->convert_arg); 436 printk("scan_end_src: %d\n", cmd->scan_end_src); 437 printk("scan_end_arg: %d\n", cmd->scan_end_arg); 438 printk("stop_src: %d\n", cmd->stop_src); 439 printk("stop_arg: %d\n", cmd->stop_arg); 440 printk("chanlist_len: %d\n", cmd->chanlist_len); 441} 442#endif 443 444#if 0 445static int cb_pcidda_ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, 446 struct comedi_cmd * cmd) 447{ 448 int err = 0; 449 int tmp; 450 451 /* cmdtest tests a particular command to see if it is valid. 452 * Using the cmdtest ioctl, a user can create a valid cmd 453 * and then have it executes by the cmd ioctl. 454 * 455 * cmdtest returns 1,2,3,4 or 0, depending on which tests 456 * the command passes. */ 457 458 /* step 1: make sure trigger sources are trivially valid */ 459 460 tmp = cmd->start_src; 461 cmd->start_src &= TRIG_NOW; 462 if (!cmd->start_src || tmp != cmd->start_src) 463 err++; 464 465 tmp = cmd->scan_begin_src; 466 cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; 467 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) 468 err++; 469 470 tmp = cmd->convert_src; 471 cmd->convert_src &= TRIG_TIMER | TRIG_EXT; 472 if (!cmd->convert_src || tmp != cmd->convert_src) 473 err++; 474 475 tmp = cmd->scan_end_src; 476 cmd->scan_end_src &= TRIG_COUNT; 477 if (!cmd->scan_end_src || tmp != cmd->scan_end_src) 478 err++; 479 480 tmp = cmd->stop_src; 481 cmd->stop_src &= TRIG_COUNT | TRIG_NONE; 482 if (!cmd->stop_src || tmp != cmd->stop_src) 483 err++; 484 485 if (err) 486 return 1; 487 488 /* step 2: make sure trigger sources are unique and mutually compatible */ 489 490 /* note that mutual compatiblity is not an issue here */ 491 if (cmd->scan_begin_src != TRIG_TIMER 492 && cmd->scan_begin_src != TRIG_EXT) 493 err++; 494 if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT) 495 err++; 496 if (cmd->stop_src != TRIG_TIMER && cmd->stop_src != TRIG_EXT) 497 err++; 498 499 if (err) 500 return 2; 501 502 /* step 3: make sure arguments are trivially compatible */ 503 504 if (cmd->start_arg != 0) { 505 cmd->start_arg = 0; 506 err++; 507 } 508#define MAX_SPEED 10000 /* in nanoseconds */ 509#define MIN_SPEED 1000000000 /* in nanoseconds */ 510 511 if (cmd->scan_begin_src == TRIG_TIMER) { 512 if (cmd->scan_begin_arg < MAX_SPEED) { 513 cmd->scan_begin_arg = MAX_SPEED; 514 err++; 515 } 516 if (cmd->scan_begin_arg > MIN_SPEED) { 517 cmd->scan_begin_arg = MIN_SPEED; 518 err++; 519 } 520 } else { 521 /* external trigger */ 522 /* should be level/edge, hi/lo specification here */ 523 /* should specify multiple external triggers */ 524 if (cmd->scan_begin_arg > 9) { 525 cmd->scan_begin_arg = 9; 526 err++; 527 } 528 } 529 if (cmd->convert_src == TRIG_TIMER) { 530 if (cmd->convert_arg < MAX_SPEED) { 531 cmd->convert_arg = MAX_SPEED; 532 err++; 533 } 534 if (cmd->convert_arg > MIN_SPEED) { 535 cmd->convert_arg = MIN_SPEED; 536 err++; 537 } 538 } else { 539 /* external trigger */ 540 /* see above */ 541 if (cmd->convert_arg > 9) { 542 cmd->convert_arg = 9; 543 err++; 544 } 545 } 546 547 if (cmd->scan_end_arg != cmd->chanlist_len) { 548 cmd->scan_end_arg = cmd->chanlist_len; 549 err++; 550 } 551 if (cmd->stop_src == TRIG_COUNT) { 552 if (cmd->stop_arg > 0x00ffffff) { 553 cmd->stop_arg = 0x00ffffff; 554 err++; 555 } 556 } else { 557 /* TRIG_NONE */ 558 if (cmd->stop_arg != 0) { 559 cmd->stop_arg = 0; 560 err++; 561 } 562 } 563 564 if (err) 565 return 3; 566 567 /* step 4: fix up any arguments */ 568 569 if (cmd->scan_begin_src == TRIG_TIMER) { 570 tmp = cmd->scan_begin_arg; 571 cb_pcidda_ns_to_timer(&cmd->scan_begin_arg, 572 cmd->flags & TRIG_ROUND_MASK); 573 if (tmp != cmd->scan_begin_arg) 574 err++; 575 } 576 if (cmd->convert_src == TRIG_TIMER) { 577 tmp = cmd->convert_arg; 578 cb_pcidda_ns_to_timer(&cmd->convert_arg, 579 cmd->flags & TRIG_ROUND_MASK); 580 if (tmp != cmd->convert_arg) 581 err++; 582 if (cmd->scan_begin_src == TRIG_TIMER && 583 cmd->scan_begin_arg < 584 cmd->convert_arg * cmd->scan_end_arg) { 585 cmd->scan_begin_arg = 586 cmd->convert_arg * cmd->scan_end_arg; 587 err++; 588 } 589 } 590 591 if (err) 592 return 4; 593 594 return 0; 595} 596#endif 597 598/* This function doesn't require a particular form, this is just 599 * what happens to be used in some of the drivers. It should 600 * convert ns nanoseconds to a counter value suitable for programming 601 * the device. Also, it should adjust ns so that it cooresponds to 602 * the actual time that the device will use. */ 603#if 0 604static int cb_pcidda_ns_to_timer(unsigned int *ns, int round) 605{ 606 /* trivial timer */ 607 return *ns; 608} 609#endif 610 611static int cb_pcidda_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s, 612 struct comedi_insn * insn, unsigned int * data) 613{ 614 unsigned int command; 615 unsigned int channel, range; 616 617 channel = CR_CHAN(insn->chanspec); 618 range = CR_RANGE(insn->chanspec); 619 620 /* adjust calibration dacs if range has changed */ 621 if (range != devpriv->ao_range[channel]) 622 cb_pcidda_calibrate(dev, channel, range); 623 624 /* output channel configuration */ 625 command = NOSU | ENABLEDAC; 626 627 /* output channel range */ 628 switch (range) { 629 case 0: 630 command |= BIP | RANGE10V; 631 break; 632 case 1: 633 command |= BIP | RANGE5V; 634 break; 635 case 2: 636 command |= BIP | RANGE2V5; 637 break; 638 case 3: 639 command |= UNIP | RANGE10V; 640 break; 641 case 4: 642 command |= UNIP | RANGE5V; 643 break; 644 case 5: 645 command |= UNIP | RANGE2V5; 646 break; 647 }; 648 649 /* output channel specification */ 650 command |= channel << 2; 651 outw(command, devpriv->dac + DACONTROL); 652 653 /* write data */ 654 outw(data[0], devpriv->dac + DADATA + channel * 2); 655 656 /* return the number of samples read/written */ 657 return 1; 658} 659 660/* lowlevel read from eeprom */ 661static unsigned int cb_pcidda_serial_in(struct comedi_device * dev) 662{ 663 unsigned int value = 0; 664 int i; 665 const int value_width = 16; /* number of bits wide values are */ 666 667 for (i = 1; i <= value_width; i++) { 668 /* read bits most significant bit first */ 669 if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) { 670 value |= 1 << (value_width - i); 671 } 672 } 673 674 return value; 675} 676 677/* lowlevel write to eeprom/dac */ 678static void cb_pcidda_serial_out(struct comedi_device * dev, unsigned int value, 679 unsigned int num_bits) 680{ 681 int i; 682 683 for (i = 1; i <= num_bits; i++) { 684 /* send bits most significant bit first */ 685 if (value & (1 << (num_bits - i))) 686 devpriv->dac_cal1_bits |= SERIAL_IN_BIT; 687 else 688 devpriv->dac_cal1_bits &= ~SERIAL_IN_BIT; 689 outw_p(devpriv->dac_cal1_bits, devpriv->dac + DACALIBRATION1); 690 } 691} 692 693/* reads a 16 bit value from board's eeprom */ 694static unsigned int cb_pcidda_read_eeprom(struct comedi_device * dev, 695 unsigned int address) 696{ 697 unsigned int i; 698 unsigned int cal2_bits; 699 unsigned int value; 700 const int max_num_caldacs = 4; /* one caldac for every two dac channels */ 701 const int read_instruction = 0x6; /* bits to send to tell eeprom we want to read */ 702 const int instruction_length = 3; 703 const int address_length = 8; 704 705 /* send serial output stream to eeprom */ 706 cal2_bits = SELECT_EEPROM_BIT | DESELECT_REF_DAC_BIT | DUMMY_BIT; 707 /* deactivate caldacs (one caldac for every two channels) */ 708 for (i = 0; i < max_num_caldacs; i++) { 709 cal2_bits |= DESELECT_CALDAC_BIT(i); 710 } 711 outw_p(cal2_bits, devpriv->dac + DACALIBRATION2); 712 713 /* tell eeprom we want to read */ 714 cb_pcidda_serial_out(dev, read_instruction, instruction_length); 715 /* send address we want to read from */ 716 cb_pcidda_serial_out(dev, address, address_length); 717 718 value = cb_pcidda_serial_in(dev); 719 720 /* deactivate eeprom */ 721 cal2_bits &= ~SELECT_EEPROM_BIT; 722 outw_p(cal2_bits, devpriv->dac + DACALIBRATION2); 723 724 return value; 725} 726 727/* writes to 8 bit calibration dacs */ 728static void cb_pcidda_write_caldac(struct comedi_device * dev, unsigned int caldac, 729 unsigned int channel, unsigned int value) 730{ 731 unsigned int cal2_bits; 732 unsigned int i; 733 const int num_channel_bits = 3; /* caldacs use 3 bit channel specification */ 734 const int num_caldac_bits = 8; /* 8 bit calibration dacs */ 735 const int max_num_caldacs = 4; /* one caldac for every two dac channels */ 736 737 /* write 3 bit channel */ 738 cb_pcidda_serial_out(dev, channel, num_channel_bits); 739 /* write 8 bit caldac value */ 740 cb_pcidda_serial_out(dev, value, num_caldac_bits); 741 742/* 743* latch stream into appropriate caldac deselect reference dac 744*/ 745 cal2_bits = DESELECT_REF_DAC_BIT | DUMMY_BIT; 746 /* deactivate caldacs (one caldac for every two channels) */ 747 for (i = 0; i < max_num_caldacs; i++) { 748 cal2_bits |= DESELECT_CALDAC_BIT(i); 749 } 750 /* activate the caldac we want */ 751 cal2_bits &= ~DESELECT_CALDAC_BIT(caldac); 752 outw_p(cal2_bits, devpriv->dac + DACALIBRATION2); 753 /* deactivate caldac */ 754 cal2_bits |= DESELECT_CALDAC_BIT(caldac); 755 outw_p(cal2_bits, devpriv->dac + DACALIBRATION2); 756} 757 758/* returns caldac that calibrates given analog out channel */ 759static unsigned int caldac_number(unsigned int channel) 760{ 761 return channel / 2; 762} 763 764/* returns caldac channel that provides fine gain for given ao channel */ 765static unsigned int fine_gain_channel(unsigned int ao_channel) 766{ 767 return 4 * (ao_channel % 2); 768} 769 770/* returns caldac channel that provides coarse gain for given ao channel */ 771static unsigned int coarse_gain_channel(unsigned int ao_channel) 772{ 773 return 1 + 4 * (ao_channel % 2); 774} 775 776/* returns caldac channel that provides coarse offset for given ao channel */ 777static unsigned int coarse_offset_channel(unsigned int ao_channel) 778{ 779 return 2 + 4 * (ao_channel % 2); 780} 781 782/* returns caldac channel that provides fine offset for given ao channel */ 783static unsigned int fine_offset_channel(unsigned int ao_channel) 784{ 785 return 3 + 4 * (ao_channel % 2); 786} 787 788/* returns eeprom address that provides offset for given ao channel and range */ 789static unsigned int offset_eeprom_address(unsigned int ao_channel, 790 unsigned int range) 791{ 792 return 0x7 + 2 * range + 12 * ao_channel; 793} 794 795/* returns eeprom address that provides gain calibration for given ao channel and range */ 796static unsigned int gain_eeprom_address(unsigned int ao_channel, 797 unsigned int range) 798{ 799 return 0x8 + 2 * range + 12 * ao_channel; 800} 801 802/* returns upper byte of eeprom entry, which gives the coarse adjustment values */ 803static unsigned int eeprom_coarse_byte(unsigned int word) 804{ 805 return (word >> 8) & 0xff; 806} 807 808/* returns lower byte of eeprom entry, which gives the fine adjustment values */ 809static unsigned int eeprom_fine_byte(unsigned int word) 810{ 811 return word & 0xff; 812} 813 814/* set caldacs to eeprom values for given channel and range */ 815static void cb_pcidda_calibrate(struct comedi_device * dev, unsigned int channel, 816 unsigned int range) 817{ 818 unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain; 819 820 /* remember range so we can tell when we need to readjust calibration */ 821 devpriv->ao_range[channel] = range; 822 823 /* get values from eeprom data */ 824 coarse_offset = 825 eeprom_coarse_byte(devpriv-> 826 eeprom_data[offset_eeprom_address(channel, range)]); 827 fine_offset = 828 eeprom_fine_byte(devpriv-> 829 eeprom_data[offset_eeprom_address(channel, range)]); 830 coarse_gain = 831 eeprom_coarse_byte(devpriv-> 832 eeprom_data[gain_eeprom_address(channel, range)]); 833 fine_gain = 834 eeprom_fine_byte(devpriv-> 835 eeprom_data[gain_eeprom_address(channel, range)]); 836 837 /* set caldacs */ 838 cb_pcidda_write_caldac(dev, caldac_number(channel), 839 coarse_offset_channel(channel), coarse_offset); 840 cb_pcidda_write_caldac(dev, caldac_number(channel), 841 fine_offset_channel(channel), fine_offset); 842 cb_pcidda_write_caldac(dev, caldac_number(channel), 843 coarse_gain_channel(channel), coarse_gain); 844 cb_pcidda_write_caldac(dev, caldac_number(channel), 845 fine_gain_channel(channel), fine_gain); 846} 847 848/* 849 * A convenient macro that defines init_module() and cleanup_module(), 850 * as necessary. 851 */ 852COMEDI_PCI_INITCLEANUP(driver_cb_pcidda, cb_pcidda_pci_table); 853