pm.h revision 15bcb91d7e607d8a2e060f01f7784a7454668da4
1/* 2 * pm.h - Power management interface 3 * 4 * Copyright (C) 2000 Andrew Henroid 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 21#ifndef _LINUX_PM_H 22#define _LINUX_PM_H 23 24#include <linux/list.h> 25#include <linux/workqueue.h> 26#include <linux/spinlock.h> 27#include <linux/wait.h> 28#include <linux/timer.h> 29#include <linux/completion.h> 30 31/* 32 * Callbacks for platform drivers to implement. 33 */ 34extern void (*pm_idle)(void); 35extern void (*pm_power_off)(void); 36extern void (*pm_power_off_prepare)(void); 37 38/* 39 * Device power management 40 */ 41 42struct device; 43 44#ifdef CONFIG_PM 45extern const char power_group_name[]; /* = "power" */ 46#else 47#define power_group_name NULL 48#endif 49 50typedef struct pm_message { 51 int event; 52} pm_message_t; 53 54/** 55 * struct dev_pm_ops - device PM callbacks 56 * 57 * Several driver power state transitions are externally visible, affecting 58 * the state of pending I/O queues and (for drivers that touch hardware) 59 * interrupts, wakeups, DMA, and other hardware state. There may also be 60 * internal transitions to various low power modes, which are transparent 61 * to the rest of the driver stack (such as a driver that's ON gating off 62 * clocks which are not in active use). 63 * 64 * The externally visible transitions are handled with the help of the following 65 * callbacks included in this structure: 66 * 67 * @prepare: Prepare the device for the upcoming transition, but do NOT change 68 * its hardware state. Prevent new children of the device from being 69 * registered after @prepare() returns (the driver's subsystem and 70 * generally the rest of the kernel is supposed to prevent new calls to the 71 * probe method from being made too once @prepare() has succeeded). If 72 * @prepare() detects a situation it cannot handle (e.g. registration of a 73 * child already in progress), it may return -EAGAIN, so that the PM core 74 * can execute it once again (e.g. after the new child has been registered) 75 * to recover from the race condition. This method is executed for all 76 * kinds of suspend transitions and is followed by one of the suspend 77 * callbacks: @suspend(), @freeze(), or @poweroff(). 78 * The PM core executes @prepare() for all devices before starting to 79 * execute suspend callbacks for any of them, so drivers may assume all of 80 * the other devices to be present and functional while @prepare() is being 81 * executed. In particular, it is safe to make GFP_KERNEL memory 82 * allocations from within @prepare(). However, drivers may NOT assume 83 * anything about the availability of the user space at that time and it 84 * is not correct to request firmware from within @prepare() (it's too 85 * late to do that). [To work around this limitation, drivers may 86 * register suspend and hibernation notifiers that are executed before the 87 * freezing of tasks.] 88 * 89 * @complete: Undo the changes made by @prepare(). This method is executed for 90 * all kinds of resume transitions, following one of the resume callbacks: 91 * @resume(), @thaw(), @restore(). Also called if the state transition 92 * fails before the driver's suspend callback (@suspend(), @freeze(), 93 * @poweroff()) can be executed (e.g. if the suspend callback fails for one 94 * of the other devices that the PM core has unsuccessfully attempted to 95 * suspend earlier). 96 * The PM core executes @complete() after it has executed the appropriate 97 * resume callback for all devices. 98 * 99 * @suspend: Executed before putting the system into a sleep state in which the 100 * contents of main memory are preserved. Quiesce the device, put it into 101 * a low power state appropriate for the upcoming system state (such as 102 * PCI_D3hot), and enable wakeup events as appropriate. 103 * 104 * @resume: Executed after waking the system up from a sleep state in which the 105 * contents of main memory were preserved. Put the device into the 106 * appropriate state, according to the information saved in memory by the 107 * preceding @suspend(). The driver starts working again, responding to 108 * hardware events and software requests. The hardware may have gone 109 * through a power-off reset, or it may have maintained state from the 110 * previous suspend() which the driver may rely on while resuming. On most 111 * platforms, there are no restrictions on availability of resources like 112 * clocks during @resume(). 113 * 114 * @freeze: Hibernation-specific, executed before creating a hibernation image. 115 * Quiesce operations so that a consistent image can be created, but do NOT 116 * otherwise put the device into a low power device state and do NOT emit 117 * system wakeup events. Save in main memory the device settings to be 118 * used by @restore() during the subsequent resume from hibernation or by 119 * the subsequent @thaw(), if the creation of the image or the restoration 120 * of main memory contents from it fails. 121 * 122 * @thaw: Hibernation-specific, executed after creating a hibernation image OR 123 * if the creation of the image fails. Also executed after a failing 124 * attempt to restore the contents of main memory from such an image. 125 * Undo the changes made by the preceding @freeze(), so the device can be 126 * operated in the same way as immediately before the call to @freeze(). 127 * 128 * @poweroff: Hibernation-specific, executed after saving a hibernation image. 129 * Quiesce the device, put it into a low power state appropriate for the 130 * upcoming system state (such as PCI_D3hot), and enable wakeup events as 131 * appropriate. 132 * 133 * @restore: Hibernation-specific, executed after restoring the contents of main 134 * memory from a hibernation image. Driver starts working again, 135 * responding to hardware events and software requests. Drivers may NOT 136 * make ANY assumptions about the hardware state right prior to @restore(). 137 * On most platforms, there are no restrictions on availability of 138 * resources like clocks during @restore(). 139 * 140 * @suspend_noirq: Complete the operations of ->suspend() by carrying out any 141 * actions required for suspending the device that need interrupts to be 142 * disabled 143 * 144 * @resume_noirq: Prepare for the execution of ->resume() by carrying out any 145 * actions required for resuming the device that need interrupts to be 146 * disabled 147 * 148 * @freeze_noirq: Complete the operations of ->freeze() by carrying out any 149 * actions required for freezing the device that need interrupts to be 150 * disabled 151 * 152 * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any 153 * actions required for thawing the device that need interrupts to be 154 * disabled 155 * 156 * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any 157 * actions required for handling the device that need interrupts to be 158 * disabled 159 * 160 * @restore_noirq: Prepare for the execution of ->restore() by carrying out any 161 * actions required for restoring the operations of the device that need 162 * interrupts to be disabled 163 * 164 * All of the above callbacks, except for @complete(), return error codes. 165 * However, the error codes returned by the resume operations, @resume(), 166 * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq() do 167 * not cause the PM core to abort the resume transition during which they are 168 * returned. The error codes returned in that cases are only printed by the PM 169 * core to the system logs for debugging purposes. Still, it is recommended 170 * that drivers only return error codes from their resume methods in case of an 171 * unrecoverable failure (i.e. when the device being handled refuses to resume 172 * and becomes unusable) to allow us to modify the PM core in the future, so 173 * that it can avoid attempting to handle devices that failed to resume and 174 * their children. 175 * 176 * It is allowed to unregister devices while the above callbacks are being 177 * executed. However, it is not allowed to unregister a device from within any 178 * of its own callbacks. 179 * 180 * There also are the following callbacks related to run-time power management 181 * of devices: 182 * 183 * @runtime_suspend: Prepare the device for a condition in which it won't be 184 * able to communicate with the CPU(s) and RAM due to power management. 185 * This need not mean that the device should be put into a low power state. 186 * For example, if the device is behind a link which is about to be turned 187 * off, the device may remain at full power. If the device does go to low 188 * power and is capable of generating run-time wake-up events, remote 189 * wake-up (i.e., a hardware mechanism allowing the device to request a 190 * change of its power state via a wake-up event, such as PCI PME) should 191 * be enabled for it. 192 * 193 * @runtime_resume: Put the device into the fully active state in response to a 194 * wake-up event generated by hardware or at the request of software. If 195 * necessary, put the device into the full power state and restore its 196 * registers, so that it is fully operational. 197 * 198 * @runtime_idle: Device appears to be inactive and it might be put into a low 199 * power state if all of the necessary conditions are satisfied. Check 200 * these conditions and handle the device as appropriate, possibly queueing 201 * a suspend request for it. The return value is ignored by the PM core. 202 */ 203 204struct dev_pm_ops { 205 int (*prepare)(struct device *dev); 206 void (*complete)(struct device *dev); 207 int (*suspend)(struct device *dev); 208 int (*resume)(struct device *dev); 209 int (*freeze)(struct device *dev); 210 int (*thaw)(struct device *dev); 211 int (*poweroff)(struct device *dev); 212 int (*restore)(struct device *dev); 213 int (*suspend_noirq)(struct device *dev); 214 int (*resume_noirq)(struct device *dev); 215 int (*freeze_noirq)(struct device *dev); 216 int (*thaw_noirq)(struct device *dev); 217 int (*poweroff_noirq)(struct device *dev); 218 int (*restore_noirq)(struct device *dev); 219 int (*runtime_suspend)(struct device *dev); 220 int (*runtime_resume)(struct device *dev); 221 int (*runtime_idle)(struct device *dev); 222}; 223 224#ifdef CONFIG_PM_SLEEP 225#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ 226 .suspend = suspend_fn, \ 227 .resume = resume_fn, \ 228 .freeze = suspend_fn, \ 229 .thaw = resume_fn, \ 230 .poweroff = suspend_fn, \ 231 .restore = resume_fn, 232#else 233#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) 234#endif 235 236#ifdef CONFIG_PM_RUNTIME 237#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ 238 .runtime_suspend = suspend_fn, \ 239 .runtime_resume = resume_fn, \ 240 .runtime_idle = idle_fn, 241#else 242#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) 243#endif 244 245/* 246 * Use this if you want to use the same suspend and resume callbacks for suspend 247 * to RAM and hibernation. 248 */ 249#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \ 250const struct dev_pm_ops name = { \ 251 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ 252} 253 254/* 255 * Use this for defining a set of PM operations to be used in all situations 256 * (sustem suspend, hibernation or runtime PM). 257 */ 258#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \ 259const struct dev_pm_ops name = { \ 260 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \ 261 SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \ 262} 263 264/* 265 * Use this for subsystems (bus types, device types, device classes) that don't 266 * need any special suspend/resume handling in addition to invoking the PM 267 * callbacks provided by device drivers supporting both the system sleep PM and 268 * runtime PM, make the pm member point to generic_subsys_pm_ops. 269 */ 270#ifdef CONFIG_PM_OPS 271extern struct dev_pm_ops generic_subsys_pm_ops; 272#define GENERIC_SUBSYS_PM_OPS (&generic_subsys_pm_ops) 273#else 274#define GENERIC_SUBSYS_PM_OPS NULL 275#endif 276 277/** 278 * PM_EVENT_ messages 279 * 280 * The following PM_EVENT_ messages are defined for the internal use of the PM 281 * core, in order to provide a mechanism allowing the high level suspend and 282 * hibernation code to convey the necessary information to the device PM core 283 * code: 284 * 285 * ON No transition. 286 * 287 * FREEZE System is going to hibernate, call ->prepare() and ->freeze() 288 * for all devices. 289 * 290 * SUSPEND System is going to suspend, call ->prepare() and ->suspend() 291 * for all devices. 292 * 293 * HIBERNATE Hibernation image has been saved, call ->prepare() and 294 * ->poweroff() for all devices. 295 * 296 * QUIESCE Contents of main memory are going to be restored from a (loaded) 297 * hibernation image, call ->prepare() and ->freeze() for all 298 * devices. 299 * 300 * RESUME System is resuming, call ->resume() and ->complete() for all 301 * devices. 302 * 303 * THAW Hibernation image has been created, call ->thaw() and 304 * ->complete() for all devices. 305 * 306 * RESTORE Contents of main memory have been restored from a hibernation 307 * image, call ->restore() and ->complete() for all devices. 308 * 309 * RECOVER Creation of a hibernation image or restoration of the main 310 * memory contents from a hibernation image has failed, call 311 * ->thaw() and ->complete() for all devices. 312 * 313 * The following PM_EVENT_ messages are defined for internal use by 314 * kernel subsystems. They are never issued by the PM core. 315 * 316 * USER_SUSPEND Manual selective suspend was issued by userspace. 317 * 318 * USER_RESUME Manual selective resume was issued by userspace. 319 * 320 * REMOTE_WAKEUP Remote-wakeup request was received from the device. 321 * 322 * AUTO_SUSPEND Automatic (device idle) runtime suspend was 323 * initiated by the subsystem. 324 * 325 * AUTO_RESUME Automatic (device needed) runtime resume was 326 * requested by a driver. 327 */ 328 329#define PM_EVENT_ON 0x0000 330#define PM_EVENT_FREEZE 0x0001 331#define PM_EVENT_SUSPEND 0x0002 332#define PM_EVENT_HIBERNATE 0x0004 333#define PM_EVENT_QUIESCE 0x0008 334#define PM_EVENT_RESUME 0x0010 335#define PM_EVENT_THAW 0x0020 336#define PM_EVENT_RESTORE 0x0040 337#define PM_EVENT_RECOVER 0x0080 338#define PM_EVENT_USER 0x0100 339#define PM_EVENT_REMOTE 0x0200 340#define PM_EVENT_AUTO 0x0400 341 342#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) 343#define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND) 344#define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME) 345#define PM_EVENT_REMOTE_RESUME (PM_EVENT_REMOTE | PM_EVENT_RESUME) 346#define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND) 347#define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME) 348 349#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) 350#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) 351#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) 352#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) 353#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) 354#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, }) 355#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, }) 356#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, }) 357#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, }) 358#define PMSG_USER_SUSPEND ((struct pm_message) \ 359 { .event = PM_EVENT_USER_SUSPEND, }) 360#define PMSG_USER_RESUME ((struct pm_message) \ 361 { .event = PM_EVENT_USER_RESUME, }) 362#define PMSG_REMOTE_RESUME ((struct pm_message) \ 363 { .event = PM_EVENT_REMOTE_RESUME, }) 364#define PMSG_AUTO_SUSPEND ((struct pm_message) \ 365 { .event = PM_EVENT_AUTO_SUSPEND, }) 366#define PMSG_AUTO_RESUME ((struct pm_message) \ 367 { .event = PM_EVENT_AUTO_RESUME, }) 368 369/** 370 * Device power management states 371 * 372 * These state labels are used internally by the PM core to indicate the current 373 * status of a device with respect to the PM core operations. 374 * 375 * DPM_ON Device is regarded as operational. Set this way 376 * initially and when ->complete() is about to be called. 377 * Also set when ->prepare() fails. 378 * 379 * DPM_PREPARING Device is going to be prepared for a PM transition. Set 380 * when ->prepare() is about to be called. 381 * 382 * DPM_RESUMING Device is going to be resumed. Set when ->resume(), 383 * ->thaw(), or ->restore() is about to be called. 384 * 385 * DPM_SUSPENDING Device has been prepared for a power transition. Set 386 * when ->prepare() has just succeeded. 387 * 388 * DPM_OFF Device is regarded as inactive. Set immediately after 389 * ->suspend(), ->freeze(), or ->poweroff() has succeeded. 390 * Also set when ->resume()_noirq, ->thaw_noirq(), or 391 * ->restore_noirq() is about to be called. 392 * 393 * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after 394 * ->suspend_noirq(), ->freeze_noirq(), or 395 * ->poweroff_noirq() has just succeeded. 396 */ 397 398enum dpm_state { 399 DPM_INVALID, 400 DPM_ON, 401 DPM_PREPARING, 402 DPM_RESUMING, 403 DPM_SUSPENDING, 404 DPM_OFF, 405 DPM_OFF_IRQ, 406}; 407 408/** 409 * Device run-time power management status. 410 * 411 * These status labels are used internally by the PM core to indicate the 412 * current status of a device with respect to the PM core operations. They do 413 * not reflect the actual power state of the device or its status as seen by the 414 * driver. 415 * 416 * RPM_ACTIVE Device is fully operational. Indicates that the device 417 * bus type's ->runtime_resume() callback has completed 418 * successfully. 419 * 420 * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has 421 * completed successfully. The device is regarded as 422 * suspended. 423 * 424 * RPM_RESUMING Device bus type's ->runtime_resume() callback is being 425 * executed. 426 * 427 * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being 428 * executed. 429 */ 430 431enum rpm_status { 432 RPM_ACTIVE = 0, 433 RPM_RESUMING, 434 RPM_SUSPENDED, 435 RPM_SUSPENDING, 436}; 437 438/** 439 * Device run-time power management request types. 440 * 441 * RPM_REQ_NONE Do nothing. 442 * 443 * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback 444 * 445 * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback 446 * 447 * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has 448 * been inactive for as long as power.autosuspend_delay 449 * 450 * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback 451 */ 452 453enum rpm_request { 454 RPM_REQ_NONE = 0, 455 RPM_REQ_IDLE, 456 RPM_REQ_SUSPEND, 457 RPM_REQ_AUTOSUSPEND, 458 RPM_REQ_RESUME, 459}; 460 461struct wakeup_source; 462 463struct dev_pm_info { 464 pm_message_t power_state; 465 unsigned int can_wakeup:1; 466 unsigned async_suspend:1; 467 enum dpm_state status; /* Owned by the PM core */ 468 spinlock_t lock; 469#ifdef CONFIG_PM_SLEEP 470 struct list_head entry; 471 struct completion completion; 472 struct wakeup_source *wakeup; 473#endif 474#ifdef CONFIG_PM_RUNTIME 475 struct timer_list suspend_timer; 476 unsigned long timer_expires; 477 struct work_struct work; 478 wait_queue_head_t wait_queue; 479 atomic_t usage_count; 480 atomic_t child_count; 481 unsigned int disable_depth:3; 482 unsigned int ignore_children:1; 483 unsigned int idle_notification:1; 484 unsigned int request_pending:1; 485 unsigned int deferred_resume:1; 486 unsigned int run_wake:1; 487 unsigned int runtime_auto:1; 488 unsigned int no_callbacks:1; 489 unsigned int use_autosuspend:1; 490 unsigned int timer_autosuspends:1; 491 enum rpm_request request; 492 enum rpm_status runtime_status; 493 int runtime_error; 494 int autosuspend_delay; 495 unsigned long last_busy; 496 unsigned long active_jiffies; 497 unsigned long suspended_jiffies; 498 unsigned long accounting_timestamp; 499#endif 500}; 501 502extern void update_pm_runtime_accounting(struct device *dev); 503 504 505/* 506 * The PM_EVENT_ messages are also used by drivers implementing the legacy 507 * suspend framework, based on the ->suspend() and ->resume() callbacks common 508 * for suspend and hibernation transitions, according to the rules below. 509 */ 510 511/* Necessary, because several drivers use PM_EVENT_PRETHAW */ 512#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE 513 514/* 515 * One transition is triggered by resume(), after a suspend() call; the 516 * message is implicit: 517 * 518 * ON Driver starts working again, responding to hardware events 519 * and software requests. The hardware may have gone through 520 * a power-off reset, or it may have maintained state from the 521 * previous suspend() which the driver will rely on while 522 * resuming. On most platforms, there are no restrictions on 523 * availability of resources like clocks during resume(). 524 * 525 * Other transitions are triggered by messages sent using suspend(). All 526 * these transitions quiesce the driver, so that I/O queues are inactive. 527 * That commonly entails turning off IRQs and DMA; there may be rules 528 * about how to quiesce that are specific to the bus or the device's type. 529 * (For example, network drivers mark the link state.) Other details may 530 * differ according to the message: 531 * 532 * SUSPEND Quiesce, enter a low power device state appropriate for 533 * the upcoming system state (such as PCI_D3hot), and enable 534 * wakeup events as appropriate. 535 * 536 * HIBERNATE Enter a low power device state appropriate for the hibernation 537 * state (eg. ACPI S4) and enable wakeup events as appropriate. 538 * 539 * FREEZE Quiesce operations so that a consistent image can be saved; 540 * but do NOT otherwise enter a low power device state, and do 541 * NOT emit system wakeup events. 542 * 543 * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring 544 * the system from a snapshot taken after an earlier FREEZE. 545 * Some drivers will need to reset their hardware state instead 546 * of preserving it, to ensure that it's never mistaken for the 547 * state which that earlier snapshot had set up. 548 * 549 * A minimally power-aware driver treats all messages as SUSPEND, fully 550 * reinitializes its device during resume() -- whether or not it was reset 551 * during the suspend/resume cycle -- and can't issue wakeup events. 552 * 553 * More power-aware drivers may also use low power states at runtime as 554 * well as during system sleep states like PM_SUSPEND_STANDBY. They may 555 * be able to use wakeup events to exit from runtime low-power states, 556 * or from system low-power states such as standby or suspend-to-RAM. 557 */ 558 559#ifdef CONFIG_PM_SLEEP 560extern void device_pm_lock(void); 561extern int sysdev_resume(void); 562extern void dpm_resume_noirq(pm_message_t state); 563extern void dpm_resume_end(pm_message_t state); 564 565extern void device_pm_unlock(void); 566extern int sysdev_suspend(pm_message_t state); 567extern int dpm_suspend_noirq(pm_message_t state); 568extern int dpm_suspend_start(pm_message_t state); 569 570extern void __suspend_report_result(const char *function, void *fn, int ret); 571 572#define suspend_report_result(fn, ret) \ 573 do { \ 574 __suspend_report_result(__func__, fn, ret); \ 575 } while (0) 576 577extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); 578#else /* !CONFIG_PM_SLEEP */ 579 580#define device_pm_lock() do {} while (0) 581#define device_pm_unlock() do {} while (0) 582 583static inline int dpm_suspend_start(pm_message_t state) 584{ 585 return 0; 586} 587 588#define suspend_report_result(fn, ret) do {} while (0) 589 590static inline int device_pm_wait_for_dev(struct device *a, struct device *b) 591{ 592 return 0; 593} 594#endif /* !CONFIG_PM_SLEEP */ 595 596/* How to reorder dpm_list after device_move() */ 597enum dpm_order { 598 DPM_ORDER_NONE, 599 DPM_ORDER_DEV_AFTER_PARENT, 600 DPM_ORDER_PARENT_BEFORE_DEV, 601 DPM_ORDER_DEV_LAST, 602}; 603 604/* 605 * Global Power Management flags 606 * Used to keep APM and ACPI from both being active 607 */ 608extern unsigned int pm_flags; 609 610#define PM_APM 1 611#define PM_ACPI 2 612 613#endif /* _LINUX_PM_H */ 614