1/* 2 * Copyright (C) 2011 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17#ifndef ANDROID_GUI_SURFACEMEDIASOURCE_H 18#define ANDROID_GUI_SURFACEMEDIASOURCE_H 19 20#include <gui/ISurfaceTexture.h> 21#include <gui/BufferQueue.h> 22 23#include <utils/threads.h> 24#include <utils/Vector.h> 25#include <media/stagefright/MediaSource.h> 26#include <media/stagefright/MediaBuffer.h> 27 28namespace android { 29// ---------------------------------------------------------------------------- 30 31class IGraphicBufferAlloc; 32class String8; 33class GraphicBuffer; 34 35// ASSUMPTIONS 36// 1. SurfaceMediaSource is initialized with width*height which 37// can never change. However, deqeueue buffer does not currently 38// enforce this as in BufferQueue, dequeue can be used by SurfaceTexture 39// which can modify the default width and heght. Also neither the width 40// nor height can be 0. 41// 2. setSynchronousMode is never used (basically no one should call 42// setSynchronousMode(false) 43// 3. setCrop, setTransform, setScalingMode should never be used 44// 4. queueBuffer returns a filled buffer to the SurfaceMediaSource. In addition, a 45// timestamp must be provided for the buffer. The timestamp is in 46// nanoseconds, and must be monotonically increasing. Its other semantics 47// (zero point, etc) are client-dependent and should be documented by the 48// client. 49// 5. Once disconnected, SurfaceMediaSource can be reused (can not 50// connect again) 51// 6. Stop is a hard stop, the last few frames held by the encoder 52// may be dropped. It is possible to wait for the buffers to be 53// returned (but not implemented) 54 55#define DEBUG_PENDING_BUFFERS 0 56 57class SurfaceMediaSource : public MediaSource, 58 public MediaBufferObserver, 59 protected BufferQueue::ConsumerListener { 60public: 61 enum { MIN_UNDEQUEUED_BUFFERS = 4}; 62 63 struct FrameAvailableListener : public virtual RefBase { 64 // onFrameAvailable() is called from queueBuffer() is the FIFO is 65 // empty. You can use SurfaceMediaSource::getQueuedCount() to 66 // figure out if there are more frames waiting. 67 // This is called without any lock held can be called concurrently by 68 // multiple threads. 69 virtual void onFrameAvailable() = 0; 70 }; 71 72 SurfaceMediaSource(uint32_t bufferWidth, uint32_t bufferHeight); 73 74 virtual ~SurfaceMediaSource(); 75 76 // For the MediaSource interface for use by StageFrightRecorder: 77 virtual status_t start(MetaData *params = NULL); 78 virtual status_t stop(); 79 virtual status_t read(MediaBuffer **buffer, 80 const ReadOptions *options = NULL); 81 virtual sp<MetaData> getFormat(); 82 83 // Get / Set the frame rate used for encoding. Default fps = 30 84 status_t setFrameRate(int32_t fps) ; 85 int32_t getFrameRate( ) const; 86 87 // The call for the StageFrightRecorder to tell us that 88 // it is done using the MediaBuffer data so that its state 89 // can be set to FREE for dequeuing 90 virtual void signalBufferReturned(MediaBuffer* buffer); 91 // end of MediaSource interface 92 93 // getTimestamp retrieves the timestamp associated with the image 94 // set by the most recent call to read() 95 // 96 // The timestamp is in nanoseconds, and is monotonically increasing. Its 97 // other semantics (zero point, etc) are source-dependent and should be 98 // documented by the source. 99 int64_t getTimestamp(); 100 101 // setFrameAvailableListener sets the listener object that will be notified 102 // when a new frame becomes available. 103 void setFrameAvailableListener(const sp<FrameAvailableListener>& listener); 104 105 // dump our state in a String 106 void dump(String8& result) const; 107 void dump(String8& result, const char* prefix, char* buffer, 108 size_t SIZE) const; 109 110 // isMetaDataStoredInVideoBuffers tells the encoder whether we will 111 // pass metadata through the buffers. Currently, it is force set to true 112 bool isMetaDataStoredInVideoBuffers() const; 113 114 sp<BufferQueue> getBufferQueue() const { return mBufferQueue; } 115 116 // To be called before start() 117 status_t setMaxAcquiredBufferCount(size_t count); 118 119 // To be called before start() 120 status_t setUseAbsoluteTimestamps(); 121 122protected: 123 124 // Implementation of the BufferQueue::ConsumerListener interface. These 125 // calls are used to notify the SurfaceTexture of asynchronous events in the 126 // BufferQueue. 127 virtual void onFrameAvailable(); 128 129 // Used as a hook to BufferQueue::disconnect() 130 // This is called by the client side when it is done 131 // TODO: Currently, this also sets mStopped to true which 132 // is needed for unblocking the encoder which might be 133 // waiting to read more frames. So if on the client side, 134 // the same thread supplies the frames and also calls stop 135 // on the encoder, the client has to call disconnect before 136 // it calls stop. 137 // In the case of the camera, 138 // that need not be required since the thread supplying the 139 // frames is separate than the one calling stop. 140 virtual void onBuffersReleased(); 141 142 static bool isExternalFormat(uint32_t format); 143 144private: 145 // mBufferQueue is the exchange point between the producer and 146 // this consumer 147 sp<BufferQueue> mBufferQueue; 148 149 // mBufferSlot caches GraphicBuffers from the buffer queue 150 sp<GraphicBuffer> mBufferSlot[BufferQueue::NUM_BUFFER_SLOTS]; 151 152 153 // The permenent width and height of SMS buffers 154 int mWidth; 155 int mHeight; 156 157 // mCurrentSlot is the buffer slot index of the buffer that is currently 158 // being used by buffer consumer 159 // (e.g. StageFrightRecorder in the case of SurfaceMediaSource or GLTexture 160 // in the case of SurfaceTexture). 161 // It is initialized to INVALID_BUFFER_SLOT, 162 // indicating that no buffer slot is currently bound to the texture. Note, 163 // however, that a value of INVALID_BUFFER_SLOT does not necessarily mean 164 // that no buffer is bound to the texture. A call to setBufferCount will 165 // reset mCurrentTexture to INVALID_BUFFER_SLOT. 166 int mCurrentSlot; 167 168 // mCurrentBuffers is a list of the graphic buffers that are being used by 169 // buffer consumer (i.e. the video encoder). It's possible that these 170 // buffers are not associated with any buffer slots, so we must track them 171 // separately. Buffers are added to this list in read, and removed from 172 // this list in signalBufferReturned 173 Vector<sp<GraphicBuffer> > mCurrentBuffers; 174 175 size_t mNumPendingBuffers; 176 177#if DEBUG_PENDING_BUFFERS 178 Vector<MediaBuffer *> mPendingBuffers; 179#endif 180 181 // mCurrentTimestamp is the timestamp for the current texture. It 182 // gets set to mLastQueuedTimestamp each time updateTexImage is called. 183 int64_t mCurrentTimestamp; 184 185 // mFrameAvailableListener is the listener object that will be called when a 186 // new frame becomes available. If it is not NULL it will be called from 187 // queueBuffer. 188 sp<FrameAvailableListener> mFrameAvailableListener; 189 190 // mMutex is the mutex used to prevent concurrent access to the member 191 // variables of SurfaceMediaSource objects. It must be locked whenever the 192 // member variables are accessed. 193 mutable Mutex mMutex; 194 195 ////////////////////////// For MediaSource 196 // Set to a default of 30 fps if not specified by the client side 197 int32_t mFrameRate; 198 199 // mStarted is a flag to check if the recording is going on 200 bool mStarted; 201 202 // mNumFramesReceived indicates the number of frames recieved from 203 // the client side 204 int mNumFramesReceived; 205 // mNumFramesEncoded indicates the number of frames passed on to the 206 // encoder 207 int mNumFramesEncoded; 208 209 // mFirstFrameTimestamp is the timestamp of the first received frame. 210 // It is used to offset the output timestamps so recording starts at time 0. 211 int64_t mFirstFrameTimestamp; 212 // mStartTimeNs is the start time passed into the source at start, used to 213 // offset timestamps. 214 int64_t mStartTimeNs; 215 216 size_t mMaxAcquiredBufferCount; 217 218 bool mUseAbsoluteTimestamps; 219 220 // mFrameAvailableCondition condition used to indicate whether there 221 // is a frame available for dequeuing 222 Condition mFrameAvailableCondition; 223 224 Condition mMediaBuffersAvailableCondition; 225 226 // Avoid copying and equating and default constructor 227 DISALLOW_IMPLICIT_CONSTRUCTORS(SurfaceMediaSource); 228}; 229 230// ---------------------------------------------------------------------------- 231}; // namespace android 232 233#endif // ANDROID_GUI_SURFACEMEDIASOURCE_H 234