config.xml revision 0e8392e1dc1c023cb4d14a10778ae9cca44aac86
1<?xml version="1.0" encoding="utf-8"?> 2<!-- 3/* 4** Copyright 2009, The Android Open Source Project 5** 6** Licensed under the Apache License, Version 2.0 (the "License"); 7** you may not use this file except in compliance with the License. 8** You may obtain a copy of the License at 9** 10** http://www.apache.org/licenses/LICENSE-2.0 11** 12** Unless required by applicable law or agreed to in writing, software 13** distributed under the License is distributed on an "AS IS" BASIS, 14** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15** See the License for the specific language governing permissions and 16** limitations under the License. 17*/ 18--> 19 20<!-- These resources are around just to allow their values to be customized 21 for different hardware and product builds. --> 22<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> 23 <!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the 24 icons in the status bar that are not notifications. --> 25 <string-array name="config_statusBarIcons"> 26 <item><xliff:g id="id">ime</xliff:g></item> 27 <item><xliff:g id="id">sync_failing</xliff:g></item> 28 <item><xliff:g id="id">sync_active</xliff:g></item> 29 <item><xliff:g id="id">gps</xliff:g></item> 30 <item><xliff:g id="id">bluetooth</xliff:g></item> 31 <item><xliff:g id="id">nfc</xliff:g></item> 32 <item><xliff:g id="id">tty</xliff:g></item> 33 <item><xliff:g id="id">speakerphone</xliff:g></item> 34 <item><xliff:g id="id">mute</xliff:g></item> 35 <item><xliff:g id="id">volume</xliff:g></item> 36 <item><xliff:g id="id">wifi</xliff:g></item> 37 <item><xliff:g id="id">cdma_eri</xliff:g></item> 38 <item><xliff:g id="id">data_connection</xliff:g></item> 39 <item><xliff:g id="id">phone_evdo_signal</xliff:g></item> 40 <item><xliff:g id="id">phone_signal</xliff:g></item> 41 <item><xliff:g id="id">battery</xliff:g></item> 42 <item><xliff:g id="id">alarm_clock</xliff:g></item> 43 <item><xliff:g id="id">secure</xliff:g></item> 44 <item><xliff:g id="id">clock</xliff:g></item> 45 </string-array> 46 47 <!-- Flag indicating whether the surface flinger has limited 48 alpha compositing functionality in hardware. If set, the window 49 manager will disable alpha trasformation in animations where not 50 strictly needed. --> 51 <bool name="config_sf_limitedAlpha">false</bool> 52 53 <!-- Default value used to block data calls if ims is not 54 connected. If you use the ims apn DCT will block 55 any other apn from connecting until ims apn is connected--> 56 <bool name="ImsConnectedDefaultValue">false</bool> 57 58 <!-- Flag indicating whether the surface flinger is inefficient 59 at performing a blur. Used by parts of the UI to turn off 60 the blur effect where it isn't worth the performance hit. 61 As of Honeycomb, blurring is not supported anymore. --> 62 <bool name="config_sf_slowBlur">true</bool> 63 64 <!-- Flag indicating that the media framework should allow changing 65 master volume stream and nothing else . --> 66 <bool name="config_useMasterVolume">false</bool> 67 68 <!-- Array of integer pairs controlling the rate at which the master volume changes 69 in response to volume up and down key events. 70 The first integer of each pair is compared against the current master volume 71 (in range 0 to 100). 72 The last pair with first integer <= the current volume is chosen, 73 and the second integer of the pair indicates the amount to increase the master volume 74 when volume up is pressed. --> 75 <integer-array name="config_masterVolumeRamp"> 76 <item>0</item> <item>5</item> <!-- default: always increase volume by 5% --> 77 </integer-array> 78 79 <!-- Flag indicating whether the AUDIO_BECOMING_NOISY notification should 80 be sent during an change to the audio output device. --> 81 <bool name="config_sendAudioBecomingNoisy">true</bool> 82 83 <!-- The duration (in milliseconds) of a short animation. --> 84 <integer name="config_shortAnimTime">200</integer> 85 86 <!-- The duration (in milliseconds) of a medium-length animation. --> 87 <integer name="config_mediumAnimTime">400</integer> 88 89 <!-- The duration (in milliseconds) of a long animation. --> 90 <integer name="config_longAnimTime">500</integer> 91 92 <!-- The duration (in milliseconds) of the activity open/close and fragment open/close animations. --> 93 <integer name="config_activityShortDur">150</integer> 94 <integer name="config_activityDefaultDur">220</integer> 95 96 <!-- Duration for the dim animation behind a dialog. This may be either 97 a percentage, which is relative to the duration of the enter/open 98 animation of the window being shown that is dimming behind, or it may 99 be an integer for a constant duration. --> 100 <fraction name="config_dimBehindFadeDuration">100%</fraction> 101 102 <!-- The maximum width we would prefer dialogs to be. 0 if there is no 103 maximum (let them grow as large as the screen). Actual values are 104 specified for -large and -xlarge configurations. --> 105 <dimen name="config_prefDialogWidth">320dp</dimen> 106 107 <!-- Enables or disables fading edges when marquee is enabled in TextView. --> 108 <bool name="config_ui_enableFadingMarquee">true</bool> 109 110 <!-- Whether dialogs should close automatically when the user touches outside 111 of them. This should not normally be modified. --> 112 <bool name="config_closeDialogWhenTouchOutside">true</bool> 113 114 <!-- The duration (in milliseconds) that the radio will scan for a signal 115 when there's no network connection. If the scan doesn't timeout, use zero --> 116 <integer name="config_radioScanningTimeout">0</integer> 117 118 <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. 119 Please don't copy them, copy anything else. --> 120 121 <!-- This string array should be overridden by the device to present a list of network 122 attributes. This is used by the connectivity manager to decide which networks can coexist 123 based on the hardware --> 124 <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], 125 [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> 126 <!-- the 5th element "resore-time" indicates the number of milliseconds to delay 127 before automatically restore the default connection. Set -1 if the connection 128 does not require auto-restore. --> 129 <!-- the 6th element indicates boot-time dependency-met value. --> 130 <string-array translatable="false" name="networkAttributes"> 131 <item>"wifi,1,1,1,-1,true"</item> 132 <item>"mobile,0,0,0,-1,true"</item> 133 <item>"mobile_mms,2,0,2,60000,true"</item> 134 <item>"mobile_supl,3,0,2,60000,true"</item> 135 <item>"mobile_hipri,5,0,3,60000,true"</item> 136 <item>"mobile_fota,10,0,2,60000,true"</item> 137 <item>"mobile_ims,11,0,2,60000,true"</item> 138 <item>"mobile_cbs,12,0,2,60000,true"</item> 139 <item>"wifi_p2p,13,1,0,-1,true"</item> 140 </string-array> 141 142 <!-- Array of ConnectivityManager.TYPE_xxxx constants for networks that may only 143 be controlled by systemOrSignature apps. --> 144 <integer-array translatable="false" name="config_protectedNetworks"> 145 <item>10</item> 146 <item>11</item> 147 <item>12</item> 148 </integer-array> 149 150 <!-- This string array should be overridden by the device to present a list of radio 151 attributes. This is used by the connectivity manager to decide which networks can coexist 152 based on the hardware --> 153 <!-- An Array of "[ConnectivityManager connectionType], 154 [# simultaneous connection types]" --> 155 <string-array translatable="false" name="radioAttributes"> 156 <item>"1,1"</item> 157 <item>"0,1"</item> 158 </string-array> 159 160 <!-- Set of NetworkInfo.getType() that reflect data usage. --> 161 <integer-array translatable="false" name="config_data_usage_network_types"> 162 <item>0</item> <!-- TYPE_MOBILE --> 163 <item>2</item> <!-- TYPE_MOBILE_MMS --> 164 <item>3</item> <!-- TYPE_MOBILE_SUPL --> 165 <item>4</item> <!-- TYPE_MOBILE_DUN --> 166 <item>5</item> <!-- TYPE_MOBILE_HIPRI --> 167 <item>10</item> <!-- TYPE_MOBILE_FOTA --> 168 <item>11</item> <!-- TYPE_MOBILE_IMS --> 169 <item>12</item> <!-- TYPE_MOBILE_CBS --> 170 </integer-array> 171 172 <!-- The maximum duration (in milliseconds) we expect a network transition to take --> 173 <integer name="config_networkTransitionTimeout">60000</integer> 174 175 <!-- List of regexpressions describing the interface (if any) that represent tetherable 176 USB interfaces. If the device doesn't want to support tething over USB this should 177 be empty. An example would be "usb.*" --> 178 <string-array translatable="false" name="config_tether_usb_regexs"> 179 </string-array> 180 181 <!-- List of regexpressions describing the interface (if any) that represent tetherable 182 Wifi interfaces. If the device doesn't want to support tethering over Wifi this 183 should be empty. An example would be "softap.*" --> 184 <string-array translatable="false" name="config_tether_wifi_regexs"> 185 </string-array> 186 187 <!-- List of regexpressions describing the interface (if any) that represent tetherable 188 WiMAX interfaces. If the device doesn't want to support tethering over Wifi this 189 should be empty. An example would be "softap.*" --> 190 <string-array translatable="false" name="config_tether_wimax_regexs"> 191 </string-array> 192 193 <!-- List of regexpressions describing the interface (if any) that represent tetherable 194 bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this 195 should be empty. --> 196 <string-array translatable="false" name="config_tether_bluetooth_regexs"> 197 </string-array> 198 199 <!-- Max number of Bluetooth tethering connections allowed. If this is 200 updated config_tether_dhcp_range has to be updated appropriately. --> 201 <integer translateable="false" name="config_max_pan_devices">5</integer> 202 203 <!-- Dhcp range (min, max) to use for tethering purposes --> 204 <string-array translatable="false" name="config_tether_dhcp_range"> 205 </string-array> 206 207 <!-- Regex of wired ethernet ifaces --> 208 <string translatable="false" name="config_ethernet_iface_regex">eth\\d</string> 209 210 <!-- If the mobile hotspot feature requires provisioning, a package name and class name 211 can be provided to launch a supported application that provisions the devices. 212 213 Example Usage: 214 215 String[] appDetails = getStringArray(R.array.config_mobile_hotspot_provision_app); 216 Intent intent = new Intent(Intent.ACTION_MAIN); 217 intent.setClassName(appDetails[0], appDetails[1]); 218 startActivityForResult(intent, 0); 219 220 public void onActivityResult(int requestCode, int resultCode, Intent intent) { 221 super.onActivityResult(requestCode, resultCode, intent); 222 if (requestCode == 0) { 223 if (resultCode == Activity.RESULT_OK) { 224 //Mobile hotspot provisioning successful 225 } else { 226 //Mobile hotspot provisioning failed 227 } 228 } 229 230 See src/com/android/settings/TetherSettings.java for more details. 231 --> 232 <!-- The first element is the package name and the second element is the class name 233 of the provisioning app --> 234 <string-array translatable="false" name="config_mobile_hotspot_provision_app"> 235 <!-- 236 <item>com.example.provisioning</item> 237 <item>com.example.provisioning.Activity</item> 238 --> 239 </string-array> 240 241 <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering --> 242 <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or 243 <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> 244 <integer-array translatable="false" name="config_tether_upstream_types"> 245 <item>1</item> 246 <item>4</item> 247 </integer-array> 248 249 <!-- String containing the apn value for tethering. May be overriden by secure settings 250 TETHER_DUN_APN. Value is a comma separated series of strings: 251 "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type" 252 note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" --> 253 <string translatable="false" name="config_tether_apndata"></string> 254 255 <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> 256 <bool translatable="false" name="config_wifi_dual_band_support">false</bool> 257 258 <!-- Boolean indicating whether the wifi chipset has p2p support --> 259 <bool translatable="false" name="config_wifi_p2p_support">false</bool> 260 <!-- Device type information conforming to Annex B format in WiFi Direct specification. 261 The default represents a dual-mode smartphone --> 262 <string translatable="false" name="config_wifi_p2p_device_type">10-0050F204-5</string> 263 264 <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism. 265 This mechanism allows the host to remain in suspend state and the dongle to actively 266 scan and wake the host when a configured SSID is detected by the dongle. This chipset 267 capability can provide power savings when wifi needs to be always kept on. 268 The driver commands needed to support the feature are BGSCAN-START and BGSCAN-STOP --> 269 <bool translatable="false" name="config_wifi_background_scan_support">false</bool> 270 271 <!-- Integer indicating wpa_supplicant scan interval in milliseconds --> 272 <integer translatable="false" name="config_wifi_supplicant_scan_interval">15000</integer> 273 274 <!-- Integer indicating the framework scan interval in milliseconds. This is used in the scenario 275 where the chipset does not support background scanning (config_wifi_background_scan_suport 276 is false) to set up a periodic wake up scan so that the device can connect to a new access 277 point on the move. A value of 0 means no periodic scans will be used in the framework. --> 278 <integer translatable="false" name="config_wifi_framework_scan_interval">300000</integer> 279 280 <!-- Flag indicating whether the keyguard should be bypassed when 281 the slider is open. This can be set or unset depending how easily 282 the slider can be opened (for example, in a pocket or purse). --> 283 <bool name="config_bypass_keyguard_if_slider_open">true</bool> 284 285 <!-- Flag indicating whether the we should enable the automatic brightness in Settings. 286 Software implementation will be used if config_hardware_auto_brightness_available is not set --> 287 <bool name="config_automatic_brightness_available">false</bool> 288 289 <!-- Don't name config resources like this. It should look like config_annoyDianne --> 290 <bool name="config_annoy_dianne">true</bool> 291 292 <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION --> 293 294 <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> 295 <bool name="config_unplugTurnsOnScreen">false</bool> 296 297 <!-- If this is true, the screen will fade off. --> 298 <bool name="config_animateScreenLights">true</bool> 299 300 <!-- If true, the screen can be rotated via the accelerometer in all 4 301 rotations as the default behavior. --> 302 <bool name="config_allowAllRotations">false</bool> 303 304 <!-- If true, the direction rotation is applied to get to an application's requested 305 orientation is reversed. Normally, the model is that landscape is 306 clockwise from portrait; thus on a portrait device an app requesting 307 landscape will cause a clockwise rotation, and on a landscape device an 308 app requesting portrait will cause a counter-clockwise rotation. Setting 309 true here reverses that logic. --> 310 <bool name="config_reverseDefaultRotation">false</bool> 311 312 <!-- The number of degrees to rotate the display when the keyboard is open. --> 313 <integer name="config_lidOpenRotation">90</integer> 314 315 <!-- The number of degrees to rotate the display when the device is in a desk dock. 316 A value of -1 means no change in orientation by default. --> 317 <integer name="config_deskDockRotation">-1</integer> 318 319 <!-- The number of degrees to rotate the display when the device is in a car dock. 320 A value of -1 means no change in orientation by default. --> 321 <integer name="config_carDockRotation">-1</integer> 322 323 <!-- Control the default UI mode type to use when there is no other type override 324 happening. One of the following values (See Configuration.java): 325 1 UI_MODE_TYPE_NORMAL 326 4 UI_MODE_TYPE_TELEVISION 327 5 UI_MODE_TYPE_APPLIANCE 328 Any other values will have surprising consequences. --> 329 <integer name="config_defaultUiModeType">1</integer> 330 331 <!-- Control whether being in the desk dock (and powered) always 332 keeps the screen on. By default it stays on when plugged in to 333 AC. 0 will not keep it on; or together 1 to stay on when plugged 334 in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> 335 <integer name="config_deskDockKeepsScreenOn">1</integer> 336 337 <!-- Control whether being in the car dock (and powered) always 338 keeps the screen on. By default it stays on when plugged in to 339 AC. 0 will not keep it on; or together 1 to stay on when plugged 340 in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> 341 <integer name="config_carDockKeepsScreenOn">1</integer> 342 343 <!-- Control whether being in the desk dock should enable accelerometer 344 based screen orientation. Note this should probably default to true 345 like car dock, but we haven't had a chance to test it. --> 346 <bool name="config_deskDockEnablesAccelerometer">false</bool> 347 348 <!-- Control whether being in the car dock should enable accelerometer based 349 screen orientation. This defaults to true because putting a device in 350 a car dock make the accelerometer more a physical input (like a lid). --> 351 <bool name="config_carDockEnablesAccelerometer">true</bool> 352 353 <!-- Indicate whether the lid state impacts the accessibility of 354 the physical keyboard. 0 means it doesn't, 1 means it is accessible 355 when the lid is open, 2 means it is accessible when the lid is 356 closed. The default is 1. --> 357 <integer name="config_lidKeyboardAccessibility">1</integer> 358 359 <!-- Indicate whether the lid state impacts the accessibility of 360 the physical keyboard. 0 means it doesn't, 1 means it is accessible 361 when the lid is open, 2 means it is accessible when the lid is 362 closed. The default is 0. --> 363 <integer name="config_lidNavigationAccessibility">0</integer> 364 365 <!-- Control the behavior when the user long presses the power button. 366 0 - Nothing 367 1 - Global actions menu 368 2 - Power off (with confirmation) 369 --> 370 <integer name="config_longPressOnPowerBehavior">1</integer> 371 372 <!-- Indicate whether the SD card is accessible without removing the battery. --> 373 <bool name="config_batterySdCardAccessibility">false</bool> 374 375 <!-- List of file paths for USB host busses to exclude from USB host support. 376 For example, if the first USB bus on the device is used to communicate 377 with the modem or some other restricted hardware, add "/dev/bus/usb/001/" 378 to this list. If this is empty, no parts of the host USB bus will be excluded. 379 --> 380 <string-array name="config_usbHostBlacklist"> 381 </string-array> 382 383 <!-- List of paths to serial ports that are available to the serial manager. 384 for example, /dev/ttyUSB0 385 --> 386 <string-array translatable="false" name="config_serialPorts"> 387 </string-array> 388 389 <!-- Vibrator pattern for feedback about a long screen/key press --> 390 <integer-array name="config_longPressVibePattern"> 391 <item>0</item> 392 <item>1</item> 393 <item>20</item> 394 <item>21</item> 395 </integer-array> 396 397 <!-- Vibrator pattern for feedback about touching a virtual key --> 398 <integer-array name="config_virtualKeyVibePattern"> 399 <item>0</item> 400 <item>10</item> 401 <item>20</item> 402 <item>30</item> 403 </integer-array> 404 405 <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> 406 <integer-array name="config_keyboardTapVibePattern"> 407 <item>40</item> 408 </integer-array> 409 410 <!-- Vibrator pattern for feedback about booting with safe mode disabled --> 411 <integer-array name="config_safeModeDisabledVibePattern"> 412 <item>0</item> 413 <item>1</item> 414 <item>20</item> 415 <item>21</item> 416 </integer-array> 417 418 <!-- Vibrator pattern for feedback about booting with safe mode disabled --> 419 <integer-array name="config_safeModeEnabledVibePattern"> 420 <item>0</item> 421 <item>1</item> 422 <item>20</item> 423 <item>21</item> 424 <item>500</item> 425 <item>600</item> 426 </integer-array> 427 428 <!-- Vibrator pattern for feedback about hitting a scroll barrier --> 429 <integer-array name="config_scrollBarrierVibePattern"> 430 <item>0</item> 431 <item>15</item> 432 <item>10</item> 433 <item>10</item> 434 </integer-array> 435 436 <bool name="config_use_strict_phone_number_comparation">false</bool> 437 438 <!-- Display low battery warning when battery level dips to this value. 439 Also, the battery stats are flushed to disk when we hit this level. --> 440 <integer name="config_criticalBatteryWarningLevel">4</integer> 441 442 <!-- Display low battery warning when battery level dips to this value --> 443 <!-- Display low battery warning when battery level dips to this value --> 444 <integer name="config_lowBatteryWarningLevel">15</integer> 445 446 <!-- Close low battery warning when battery level reaches this value --> 447 <integer name="config_lowBatteryCloseWarningLevel">20</integer> 448 449 <!-- Default color for notification LED. --> 450 <color name="config_defaultNotificationColor">#ff00ff00</color> 451 452 <!-- Default LED on time for notification LED in milliseconds. --> 453 <integer name="config_defaultNotificationLedOn">500</integer> 454 455 <!-- Default LED off time for notification LED in milliseconds. --> 456 <integer name="config_defaultNotificationLedOff">2000</integer> 457 458 <!-- Default value for led color when battery is low on charge --> 459 <integer name="config_notificationsBatteryLowARGB">0xFFFF0000</integer> 460 461 <!-- Default value for led color when battery is medium charged --> 462 <integer name="config_notificationsBatteryMediumARGB">0xFFFFFF00</integer> 463 464 <!-- Default value for led color when battery is fully charged --> 465 <integer name="config_notificationsBatteryFullARGB">0xFF00FF00</integer> 466 467 <!-- Default value for LED on time when the battery is low on charge in miliseconds --> 468 <integer name="config_notificationsBatteryLedOn">125</integer> 469 470 <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> 471 <bool name="config_intrusiveNotificationLed">false</bool> 472 473 <!-- Default value for LED off time when the battery is low on charge in miliseconds --> 474 <integer name="config_notificationsBatteryLedOff">2875</integer> 475 476 <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> 477 <bool name="config_disableMenuKeyInLockScreen">false</bool> 478 479 <!-- Don't show lock screen before unlock screen (PIN/pattern/password) --> 480 <bool name="config_enableLockBeforeUnlockScreen">false</bool> 481 482 <!-- Diable lockscreen rotation by default --> 483 <bool name="config_enableLockScreenRotation">false</bool> 484 485 <!-- Enable puk unlockscreen by default. 486 If unlock screen is disabled, the puk should be unlocked through Emergency Dialer --> 487 <bool name="config_enable_puk_unlock_screen">true</bool> 488 489 <!-- Enable emergency call when sim is locked or puk locked. Some countries/carriers do not 490 allow emergency calls to be placed without the IMSI, which is locked in the SIM. 491 If so, this should be set to 'false' in an overlay. --> 492 <bool name="config_enable_emergency_call_while_sim_locked">true</bool> 493 494 <!-- Control the behavior when the user long presses the home button. 495 0 - Nothing 496 1 - Recent apps dialog 497 2 - Recent apps view in SystemUI 498 This needs to match the constants in 499 policy/src/com/android/internal/policy/impl/PhoneWindowManager.java 500 --> 501 <integer name="config_longPressOnHomeBehavior">2</integer> 502 503 <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. 504 The N entries of this array define N + 1 zones as follows: 505 506 Zone 0: 0 <= LUX < array[0] 507 Zone 1: array[0] <= LUX < array[1] 508 ... 509 Zone N: array[N - 1] <= LUX < array[N] 510 Zone N + 1: array[N] <= LUX < infinity 511 512 Must be overridden in platform specific overlays --> 513 <integer-array name="config_autoBrightnessLevels"> 514 </integer-array> 515 516 517 <!-- Minimum screen brightness allowed by the power manager. --> 518 <integer name="config_screenBrightnessDim">20</integer> 519 520 <!-- Array of output values for LCD backlight corresponding to the LUX values 521 in the config_autoBrightnessLevels array. This array should have size one greater 522 than the size of the config_autoBrightnessLevels array. 523 This must be overridden in platform specific overlays --> 524 <integer-array name="config_autoBrightnessLcdBacklightValues"> 525 </integer-array> 526 527 <!-- Array of output values for button backlight corresponding to the LUX values 528 in the config_autoBrightnessLevels array. This array should have size one greater 529 than the size of the config_autoBrightnessLevels array. 530 This must be overridden in platform specific overlays --> 531 <integer-array name="config_autoBrightnessButtonBacklightValues"> 532 </integer-array> 533 534 <!-- Array of output values for keyboard backlight corresponding to the LUX values 535 in the config_autoBrightnessLevels array. This array should have size one greater 536 than the size of the config_autoBrightnessLevels array. 537 This must be overridden in platform specific overlays --> 538 <integer-array name="config_autoBrightnessKeyboardBacklightValues"> 539 </integer-array> 540 541 <!-- Amount of time it takes for the light sensor to warm up in milliseconds. 542 For this time after the screen turns on, the Power Manager 543 will not debounce light sensor readings --> 544 <integer name="config_lightSensorWarmupTime">0</integer> 545 546 <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView --> 547 <bool name="config_swipeDisambiguation">true</bool> 548 549 <!-- Specifies the amount of time to disable virtual keys after the screen is touched 550 in order to filter out accidental virtual key presses due to swiping gestures 551 or taps near the edge of the display. May be 0 to disable the feature. 552 It is recommended that this value be no more than 250 ms. 553 This feature should be disabled for most devices. --> 554 <integer name="config_virtualKeyQuietTimeMillis">0</integer> 555 556 <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 557 specified --> 558 <string name="default_wallpaper_component">@null</string> 559 560 <!-- True if WallpaperService is enabled --> 561 <bool name="config_enableWallpaperService">true</bool> 562 563 <!-- Component name of the service providing network location support. --> 564 <string name="config_networkLocationProvider">@null</string> 565 566 <!-- Component name of the service providing geocoder API support. --> 567 <string name="config_geocodeProvider">@null</string> 568 569 <!-- Boolean indicating if current platform supports bluetooth SCO for off call 570 use cases --> 571 <bool name="config_bluetooth_sco_off_call">true</bool> 572 573 <!-- Boolean indicating if current platform supports bluetooth wide band 574 speech --> 575 <bool name="config_bluetooth_wide_band_speech">true</bool> 576 577 <!-- Boolean indicating if current platform supports quick switch-on/off of 578 Bluetooth Module --> 579 <bool name="config_bluetooth_adapter_quick_switch">true</bool> 580 581 <!-- The default data-use polling period. --> 582 <integer name="config_datause_polling_period_sec">600</integer> 583 584 <!-- The default data-use threshold in bytes. 0 disables--> 585 <integer name="config_datause_threshold_bytes">0</integer> 586 587 <!-- The default reduced-datarate value in kilobits per sec --> 588 <integer name="config_datause_throttle_kbitsps">300</integer> 589 590 <!-- The default iface on which to monitor data use --> 591 <string name="config_datause_iface">rmnet0</string> 592 593 <!-- The default reduced-datarate notification mask --> 594 <!-- 2 means give warning --> 595 <integer name="config_datause_notification_type">2</integer> 596 597 <!-- Flag indicating whether the current device is "voice capable". 598 If true, this means that the device supports circuit-switched 599 (i.e. voice) phone calls over the telephony network, and is 600 allowed to display the in-call UI while a cellular voice call is 601 active. This can be overridden to false for "data only" devices 602 which can't make voice calls and don't support any in-call UI. 603 604 Note: this flag is subtly different from the 605 PackageManager.FEATURE_TELEPHONY system feature, which is 606 available on *any* device with a telephony radio, even if the 607 device is data-only. --> 608 <bool name="config_voice_capable">true</bool> 609 610 <!-- Flag indicating whether the current device allows sms service. 611 If true, this means that the device supports both sending and 612 receiving sms via the telephony network. 613 This can be overridden to false for "data only" devices 614 which can't send and receive sms message. 615 616 Note: Disable SMS also disable voicemail waiting sms, 617 cell broadcasting sms, and MMS. --> 618 <bool name="config_sms_capable">true</bool> 619 620 <!-- IP address of the dns server to use if nobody else suggests one --> 621 <string name="config_default_dns_server">8.8.8.8</string> 622 623 <!-- The default character set for GsmAlphabet --> 624 <!-- Empty string means MBCS is not considered --> 625 <string name="gsm_alphabet_default_charset"></string> 626 627 <!-- Enables SIP on WIFI only --> 628 <bool name="config_sip_wifi_only">false</bool> 629 630 <!-- Enables built-in SIP phone capability --> 631 <bool name="config_built_in_sip_phone">true</bool> 632 633 <!-- Boolean indicating if restoring network selection should be skipped --> 634 <!-- The restoring is handled by modem if it is true--> 635 <bool translatable="false" name="skip_restoring_network_selection">false</bool> 636 637 <!-- Number of database connections opened and managed by framework layer 638 to handle queries on each database. --> 639 <integer name="db_connection_pool_size">1</integer> 640 641 <!-- Max space (in MB) allocated to DownloadManager to store the downloaded 642 files if they are to be stored in DownloadManager's data dir, 643 which typically is /data/data/com.android.providers.downloads/files --> 644 <integer name="config_downloadDataDirSize">100</integer> 645 646 <!-- Max number of downloads allowed to proceed concurrently --> 647 <integer name="config_MaxConcurrentDownloadsAllowed">5</integer> 648 649 <!-- When the free space available in DownloadManager's data dir falls 650 below the percentage value specified by this param, DownloadManager 651 starts removing files to try to make percentage of available 652 free space above this threshold value. --> 653 <integer name="config_downloadDataDirLowSpaceThreshold">10</integer> 654 655 <!-- The URL that should be sent in an x-wap-profile header with an HTTP request, 656 as defined in the Open Mobile Alliance User Agent Profile specification 657 OMA-TS-UAProf-V2_0-20060206-A Section 8.1.1.1. If the URL contains a '%s' 658 format string then that substring will be replaced with the value of 659 Build.MODEL. The format string shall not be escaped. --> 660 <string name="config_useragentprofile_url"></string> 661 662 <!-- When a database query is executed, the results retuned are paginated 663 in pages of size (in KB) indicated by this value --> 664 <integer name="config_cursorWindowSize">2048</integer> 665 666 <!-- Sets whether menu shortcuts should be displayed on panel menus when 667 a keyboard is present. --> 668 <bool name="config_showMenuShortcutsWhenKeyboardPresent">false</bool> 669 670 <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD --> 671 <string-array name="config_twoDigitNumberPattern"> 672 </string-array> 673 674 <!-- The VoiceMail default value is displayed to my own number if it is true --> 675 <bool name="config_telephony_use_own_number_for_voicemail">false</bool> 676 677 <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder. 678 If false, decoded by Latin decoder. --> 679 <bool name="config_sms_utf8_support">false</bool> 680 681 <!-- If this value is true, The mms content-disposition field is supported correctly. 682 If false, Content-disposition fragments are ignored --> 683 <bool name="config_mms_content_disposition_support">true</bool> 684 685 <!-- National Language Identifier codes for the following two config items. 686 (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1): 687 0 - reserved 688 1 - Turkish 689 2 - Spanish (single shift table only) 690 3 - Portuguese 691 4 - Bengali 692 5 - Gujarati 693 6 - Hindi 694 7 - Kannada 695 8 - Malayalam 696 9 - Oriya 697 10 - Punjabi 698 11 - Tamil 699 12 - Telugu 700 13 - Urdu 701 14+ - reserved --> 702 703 <!-- National language single shift tables to enable for SMS encoding. 704 Decoding is always enabled. 3GPP TS 23.038 states that this feature 705 should not be enabled until a formal request is issued by the relevant 706 national regulatory body. Array elements are codes from the table above. 707 Example 1: devices sold in Turkey must include table 1 to conform with 708 By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) 709 Example 2: devices sold in India should include tables 4 through 13 710 to enable use of the new Release 9 tables for Indic languages. --> 711 <integer-array name="config_sms_enabled_single_shift_tables"></integer-array> 712 713 <!-- National language locking shift tables to enable for SMS encoding. 714 Decoding is always enabled. 3GPP TS 23.038 states that this feature 715 should not be enabled until a formal request is issued by the relevant 716 national regulatory body. Array elements are codes from the table above. 717 Example 1: devices sold in Turkey must include table 1 after the 718 Turkish Telecommunication Authority requires locking shift encoding 719 to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) 720 See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014 721 Example 2: devices sold in India should include tables 4 through 13 722 to enable use of the new Release 9 tables for Indic languages. --> 723 <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array> 724 725 <!-- Set to true if the RSSI should always display CDMA signal strength even on EVDO --> 726 <bool name="config_alwaysUseCdmaRssi">false</bool> 727 728 729 <!-- If this value is true, duplicate Source/Destination port fields 730 in WDP header of some carriers OMADM wap push are supported. 731 ex: MSGTYPE-TotalSegments-CurrentSegment 732 -SourcePortDestPort-SourcePortDestPort-OMADM PDU 733 If false, not supported. --> 734 <bool name="config_duplicate_port_omadm_wappush">false</bool> 735 736 <!-- Maximum numerical value that will be shown in a status bar 737 notification icon or in the notification itself. Will be replaced 738 with @string/status_bar_notification_info_overflow when shown in the 739 UI. --> 740 <integer name="status_bar_notification_info_maxnum">999</integer> 741 742 <!-- Path to an ISO image to be shared with via USB mass storage. 743 This is intended to allow packaging drivers or tools for installation on a PC. --> 744 <string translatable="false" name="config_isoImagePath"></string> 745 746 <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be 747 autodetected from the Configuration. --> 748 <bool name="config_showNavigationBar">false</bool> 749 750 <!-- Whether action menu items should be displayed in ALLCAPS or not. 751 Defaults to true. If this is not appropriate for specific locales 752 it should be disabled in that locale's resources. --> 753 <bool name="config_actionMenuItemAllCaps">true</bool> 754 755 <!-- Whether action menu items should obey the "withText" showAsAction 756 flag. This may be set to false for situations where space is 757 extremely limited. --> 758 <bool name="config_allowActionMenuItemTextWithIcon">false</bool> 759 760 <!-- Remote server that can provide NTP responses. --> 761 <string translatable="false" name="config_ntpServer">pool.ntp.org</string> 762 <!-- Timeout to wait for NTP server response. --> 763 <integer name="config_ntpTimeout">20000</integer> 764 765 <!-- Default network policy warning threshold, in megabytes. --> 766 <integer name="config_networkPolicyDefaultWarning">2048</integer> 767 768 <!-- Set and Unsets WiMAX --> 769 <bool name="config_wimaxEnabled">false</bool> 770 <!-- Location of the wimax framwork jar location --> 771 <string name="config_wimaxServiceJarLocation"></string> 772 <!-- Location of the wimax native library locaiton --> 773 <string name="config_wimaxNativeLibLocation"></string> 774 <!-- Name of the wimax manager class --> 775 <string name="config_wimaxManagerClassname"></string> 776 <!-- Name of the wimax service class --> 777 <string name="config_wimaxServiceClassname"></string> 778 <!-- Name of the wimax state tracker clas --> 779 <string name="config_wimaxStateTrackerClassname"></string> 780 781 <!-- Base "touch slop" value used by ViewConfiguration as a 782 movement threshold where scrolling should begin. --> 783 <dimen name="config_viewConfigurationTouchSlop">8dp</dimen> 784</resources> 785