config.xml revision e90585f89d550a61e3efd5050efdc5be2be494af
1<?xml version="1.0" encoding="utf-8"?> 2<!-- 3/* 4** Copyright 2009, The Android Open Source Project 5** 6** Licensed under the Apache License, Version 2.0 (the "License"); 7** you may not use this file except in compliance with the License. 8** You may obtain a copy of the License at 9** 10** http://www.apache.org/licenses/LICENSE-2.0 11** 12** Unless required by applicable law or agreed to in writing, software 13** distributed under the License is distributed on an "AS IS" BASIS, 14** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 15** See the License for the specific language governing permissions and 16** limitations under the License. 17*/ 18--> 19 20<!-- These resources are around just to allow their values to be customized 21 for different hardware and product builds. Do not translate. --> 22<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> 23 <!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the 24 icons in the status bar that are not notifications. --> 25 <string-array name="config_statusBarIcons"> 26 <item><xliff:g id="id">ime</xliff:g></item> 27 <item><xliff:g id="id">sync_failing</xliff:g></item> 28 <item><xliff:g id="id">sync_active</xliff:g></item> 29 <item><xliff:g id="id">gps</xliff:g></item> 30 <item><xliff:g id="id">bluetooth</xliff:g></item> 31 <item><xliff:g id="id">nfc</xliff:g></item> 32 <item><xliff:g id="id">tty</xliff:g></item> 33 <item><xliff:g id="id">speakerphone</xliff:g></item> 34 <item><xliff:g id="id">mute</xliff:g></item> 35 <item><xliff:g id="id">volume</xliff:g></item> 36 <item><xliff:g id="id">wifi</xliff:g></item> 37 <item><xliff:g id="id">cdma_eri</xliff:g></item> 38 <item><xliff:g id="id">data_connection</xliff:g></item> 39 <item><xliff:g id="id">phone_evdo_signal</xliff:g></item> 40 <item><xliff:g id="id">phone_signal</xliff:g></item> 41 <item><xliff:g id="id">battery</xliff:g></item> 42 <item><xliff:g id="id">alarm_clock</xliff:g></item> 43 <item><xliff:g id="id">secure</xliff:g></item> 44 <item><xliff:g id="id">clock</xliff:g></item> 45 </string-array> 46 47 <!-- Flag indicating whether the surface flinger has limited 48 alpha compositing functionality in hardware. If set, the window 49 manager will disable alpha trasformation in animations where not 50 strictly needed. --> 51 <bool name="config_sf_limitedAlpha">false</bool> 52 53 <!-- Default value used to block data calls if ims is not 54 connected. If you use the ims apn DCT will block 55 any other apn from connecting until ims apn is connected--> 56 <bool name="ImsConnectedDefaultValue">false</bool> 57 58 <!-- Flag indicating whether the surface flinger is inefficient 59 at performing a blur. Used by parts of the UI to turn off 60 the blur effect where it isn't worth the performance hit. 61 As of Honeycomb, blurring is not supported anymore. --> 62 <bool name="config_sf_slowBlur">true</bool> 63 64 <!-- Flag indicating that the media framework should allow changing 65 master volume stream and nothing else . --> 66 <bool name="config_useMasterVolume">false</bool> 67 68 <!-- Array of integer pairs controlling the rate at which the master volume changes 69 in response to volume up and down key events. 70 The first integer of each pair is compared against the current master volume 71 (in range 0 to 100). 72 The last pair with first integer <= the current volume is chosen, 73 and the second integer of the pair indicates the amount to increase the master volume 74 when volume up is pressed. --> 75 <integer-array name="config_masterVolumeRamp"> 76 <item>0</item> <item>5</item> <!-- default: always increase volume by 5% --> 77 </integer-array> 78 79 <!-- Flag indicating whether the AUDIO_BECOMING_NOISY notification should 80 be sent during a change to the audio output device. --> 81 <bool name="config_sendAudioBecomingNoisy">true</bool> 82 83 <!-- The duration (in milliseconds) of a short animation. --> 84 <integer name="config_shortAnimTime">200</integer> 85 86 <!-- The duration (in milliseconds) of a medium-length animation. --> 87 <integer name="config_mediumAnimTime">400</integer> 88 89 <!-- The duration (in milliseconds) of a long animation. --> 90 <integer name="config_longAnimTime">500</integer> 91 92 <!-- The duration (in milliseconds) of the activity open/close and fragment open/close animations. --> 93 <integer name="config_activityShortDur">150</integer> 94 <integer name="config_activityDefaultDur">220</integer> 95 96 <!-- Duration for the dim animation behind a dialog. This may be either 97 a percentage, which is relative to the duration of the enter/open 98 animation of the window being shown that is dimming behind, or it may 99 be an integer for a constant duration. --> 100 <fraction name="config_dimBehindFadeDuration">100%</fraction> 101 102 <!-- The maximum width we would prefer dialogs to be. 0 if there is no 103 maximum (let them grow as large as the screen). Actual values are 104 specified for -large and -xlarge configurations. --> 105 <dimen name="config_prefDialogWidth">320dp</dimen> 106 107 <!-- Enables or disables fading edges when marquee is enabled in TextView. --> 108 <bool name="config_ui_enableFadingMarquee">true</bool> 109 110 <!-- Whether dialogs should close automatically when the user touches outside 111 of them. This should not normally be modified. --> 112 <bool name="config_closeDialogWhenTouchOutside">true</bool> 113 114 <!-- The duration (in milliseconds) that the radio will scan for a signal 115 when there's no network connection. If the scan doesn't timeout, use zero --> 116 <integer name="config_radioScanningTimeout">0</integer> 117 118 <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. 119 Please don't copy them, copy anything else. --> 120 121 <!-- This string array should be overridden by the device to present a list of network 122 attributes. This is used by the connectivity manager to decide which networks can coexist 123 based on the hardware --> 124 <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], 125 [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> 126 <!-- the 5th element "resore-time" indicates the number of milliseconds to delay 127 before automatically restore the default connection. Set -1 if the connection 128 does not require auto-restore. --> 129 <!-- the 6th element indicates boot-time dependency-met value. --> 130 <string-array translatable="false" name="networkAttributes"> 131 <item>"wifi,1,1,1,-1,true"</item> 132 <item>"mobile,0,0,0,-1,true"</item> 133 <item>"mobile_mms,2,0,2,60000,true"</item> 134 <item>"mobile_supl,3,0,2,60000,true"</item> 135 <item>"mobile_hipri,5,0,3,60000,true"</item> 136 <item>"mobile_fota,10,0,2,60000,true"</item> 137 <item>"mobile_ims,11,0,2,60000,true"</item> 138 <item>"mobile_cbs,12,0,2,60000,true"</item> 139 <item>"wifi_p2p,13,1,0,-1,true"</item> 140 </string-array> 141 142 <!-- Array of ConnectivityManager.TYPE_xxxx constants for networks that may only 143 be controlled by systemOrSignature apps. --> 144 <integer-array translatable="false" name="config_protectedNetworks"> 145 <item>10</item> 146 <item>11</item> 147 <item>12</item> 148 </integer-array> 149 150 <!-- This string array should be overridden by the device to present a list of radio 151 attributes. This is used by the connectivity manager to decide which networks can coexist 152 based on the hardware --> 153 <!-- An Array of "[ConnectivityManager connectionType], 154 [# simultaneous connection types]" --> 155 <string-array translatable="false" name="radioAttributes"> 156 <item>"1,1"</item> 157 <item>"0,1"</item> 158 </string-array> 159 160 <!-- Set of NetworkInfo.getType() that reflect data usage. --> 161 <integer-array translatable="false" name="config_data_usage_network_types"> 162 <item>0</item> <!-- TYPE_MOBILE --> 163 <item>2</item> <!-- TYPE_MOBILE_MMS --> 164 <item>3</item> <!-- TYPE_MOBILE_SUPL --> 165 <item>4</item> <!-- TYPE_MOBILE_DUN --> 166 <item>5</item> <!-- TYPE_MOBILE_HIPRI --> 167 <item>10</item> <!-- TYPE_MOBILE_FOTA --> 168 <item>11</item> <!-- TYPE_MOBILE_IMS --> 169 <item>12</item> <!-- TYPE_MOBILE_CBS --> 170 </integer-array> 171 172 <!-- The maximum duration (in milliseconds) we expect a network transition to take --> 173 <integer name="config_networkTransitionTimeout">60000</integer> 174 175 <!-- List of regexpressions describing the interface (if any) that represent tetherable 176 USB interfaces. If the device doesn't want to support tething over USB this should 177 be empty. An example would be "usb.*" --> 178 <string-array translatable="false" name="config_tether_usb_regexs"> 179 </string-array> 180 181 <!-- List of regexpressions describing the interface (if any) that represent tetherable 182 Wifi interfaces. If the device doesn't want to support tethering over Wifi this 183 should be empty. An example would be "softap.*" --> 184 <string-array translatable="false" name="config_tether_wifi_regexs"> 185 </string-array> 186 187 <!-- List of regexpressions describing the interface (if any) that represent tetherable 188 WiMAX interfaces. If the device doesn't want to support tethering over Wifi this 189 should be empty. An example would be "softap.*" --> 190 <string-array translatable="false" name="config_tether_wimax_regexs"> 191 </string-array> 192 193 <!-- List of regexpressions describing the interface (if any) that represent tetherable 194 bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this 195 should be empty. --> 196 <string-array translatable="false" name="config_tether_bluetooth_regexs"> 197 </string-array> 198 199 <!-- Max number of Bluetooth tethering connections allowed. If this is 200 updated config_tether_dhcp_range has to be updated appropriately. --> 201 <integer translateable="false" name="config_max_pan_devices">5</integer> 202 203 <!-- Dhcp range (min, max) to use for tethering purposes --> 204 <string-array translatable="false" name="config_tether_dhcp_range"> 205 </string-array> 206 207 <!-- Regex of wired ethernet ifaces --> 208 <string translatable="false" name="config_ethernet_iface_regex">eth\\d</string> 209 210 <!-- If the mobile hotspot feature requires provisioning, a package name and class name 211 can be provided to launch a supported application that provisions the devices. 212 213 Example Usage: 214 215 String[] appDetails = getStringArray(R.array.config_mobile_hotspot_provision_app); 216 Intent intent = new Intent(Intent.ACTION_MAIN); 217 intent.setClassName(appDetails[0], appDetails[1]); 218 startActivityForResult(intent, 0); 219 220 public void onActivityResult(int requestCode, int resultCode, Intent intent) { 221 super.onActivityResult(requestCode, resultCode, intent); 222 if (requestCode == 0) { 223 if (resultCode == Activity.RESULT_OK) { 224 //Mobile hotspot provisioning successful 225 } else { 226 //Mobile hotspot provisioning failed 227 } 228 } 229 230 See src/com/android/settings/TetherSettings.java for more details. 231 --> 232 <!-- The first element is the package name and the second element is the class name 233 of the provisioning app --> 234 <string-array translatable="false" name="config_mobile_hotspot_provision_app"> 235 <!-- 236 <item>com.example.provisioning</item> 237 <item>com.example.provisioning.Activity</item> 238 --> 239 </string-array> 240 241 <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering --> 242 <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or 243 <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> 244 <integer-array translatable="false" name="config_tether_upstream_types"> 245 <item>1</item> 246 <item>4</item> 247 </integer-array> 248 249 <!-- If the DUN connection for this CDMA device supports more than just DUN --> 250 <!-- traffic you should list them here. --> 251 <!-- If this device is not CDMA this is ignored. If this list is empty on --> 252 <!-- a DUN-requiring CDMA device, the DUN APN will just support just DUN. --> 253 <string-array translatable="false" name="config_cdma_dun_supported_types"> 254 </string-array> 255 256 <!-- String containing the apn value for tethering. May be overriden by secure settings 257 TETHER_DUN_APN. Value is a comma separated series of strings: 258 "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type" 259 note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" --> 260 <string translatable="false" name="config_tether_apndata"></string> 261 262 <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> 263 <bool translatable="false" name="config_wifi_dual_band_support">false</bool> 264 265 <!-- Boolean indicating whether the wifi chipset has p2p support --> 266 <bool translatable="false" name="config_wifi_p2p_support">false</bool> 267 <!-- Device type information conforming to Annex B format in WiFi Direct specification. 268 The default represents a dual-mode smartphone --> 269 <string translatable="false" name="config_wifi_p2p_device_type">10-0050F204-5</string> 270 271 <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism. 272 This mechanism allows the host to remain in suspend state and the dongle to actively 273 scan and wake the host when a configured SSID is detected by the dongle. This chipset 274 capability can provide power savings when wifi needs to be always kept on. 275 The driver commands needed to support the feature are BGSCAN-START and BGSCAN-STOP --> 276 <bool translatable="false" name="config_wifi_background_scan_support">false</bool> 277 278 <!-- Integer indicating wpa_supplicant scan interval in milliseconds --> 279 <integer translatable="false" name="config_wifi_supplicant_scan_interval">15000</integer> 280 281 <!-- Integer indicating the framework scan interval in milliseconds. This is used in the scenario 282 where the chipset does not support background scanning (config_wifi_background_scan_suport 283 is false) to set up a periodic wake up scan so that the device can connect to a new access 284 point on the move. A value of 0 means no periodic scans will be used in the framework. --> 285 <integer translatable="false" name="config_wifi_framework_scan_interval">300000</integer> 286 287 <!-- Wifi driver stop delay, in milliseconds. 288 Default value is 2 minutes. --> 289 <integer translatable="false" name="config_wifi_driver_stop_delay">120000</integer> 290 291 <!-- Flag indicating whether the keyguard should be bypassed when 292 the slider is open. This can be set or unset depending how easily 293 the slider can be opened (for example, in a pocket or purse). --> 294 <bool name="config_bypass_keyguard_if_slider_open">true</bool> 295 296 <!-- Flag indicating whether the we should enable the automatic brightness in Settings. 297 Software implementation will be used if config_hardware_auto_brightness_available is not set --> 298 <bool name="config_automatic_brightness_available">false</bool> 299 300 <!-- Don't name config resources like this. It should look like config_annoyDianne --> 301 <bool name="config_annoy_dianne">true</bool> 302 303 <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION --> 304 305 <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> 306 <bool name="config_unplugTurnsOnScreen">false</bool> 307 308 <!-- If this is true, the screen will fade off. --> 309 <bool name="config_animateScreenLights">true</bool> 310 311 <!-- If this is true, key chords can be used to take a screenshot on the device. --> 312 <bool name="config_enableScreenshotChord">true</bool> 313 314 <!-- If true, the screen can be rotated via the accelerometer in all 4 315 rotations as the default behavior. --> 316 <bool name="config_allowAllRotations">false</bool> 317 318 <!-- If true, the direction rotation is applied to get to an application's requested 319 orientation is reversed. Normally, the model is that landscape is 320 clockwise from portrait; thus on a portrait device an app requesting 321 landscape will cause a clockwise rotation, and on a landscape device an 322 app requesting portrait will cause a counter-clockwise rotation. Setting 323 true here reverses that logic. --> 324 <bool name="config_reverseDefaultRotation">false</bool> 325 326 <!-- The number of degrees to rotate the display when the keyboard is open. --> 327 <integer name="config_lidOpenRotation">90</integer> 328 329 <!-- The number of degrees to rotate the display when the device is in a desk dock. 330 A value of -1 means no change in orientation by default. --> 331 <integer name="config_deskDockRotation">-1</integer> 332 333 <!-- The number of degrees to rotate the display when the device is in a car dock. 334 A value of -1 means no change in orientation by default. --> 335 <integer name="config_carDockRotation">-1</integer> 336 337 <!-- Control the default UI mode type to use when there is no other type override 338 happening. One of the following values (See Configuration.java): 339 1 UI_MODE_TYPE_NORMAL 340 4 UI_MODE_TYPE_TELEVISION 341 5 UI_MODE_TYPE_APPLIANCE 342 Any other values will have surprising consequences. --> 343 <integer name="config_defaultUiModeType">1</integer> 344 345 <!-- Control whether being in the desk dock (and powered) always 346 keeps the screen on. By default it stays on when plugged in to 347 AC. 0 will not keep it on; or together 1 to stay on when plugged 348 in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> 349 <integer name="config_deskDockKeepsScreenOn">1</integer> 350 351 <!-- Control whether being in the car dock (and powered) always 352 keeps the screen on. By default it stays on when plugged in to 353 AC. 0 will not keep it on; or together 1 to stay on when plugged 354 in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> 355 <integer name="config_carDockKeepsScreenOn">1</integer> 356 357 <!-- Control whether being in the desk dock should enable accelerometer 358 based screen orientation. This defaults to true because it is 359 common for desk docks to be sold in a variety of form factors 360 with different orientations. Since we cannot always tell these docks 361 apart and the docks cannot report their true orientation on their own, 362 we rely on gravity to determine the effective orientation. --> 363 <bool name="config_deskDockEnablesAccelerometer">true</bool> 364 365 <!-- Control whether being in the car dock should enable accelerometer based 366 screen orientation. This defaults to true because putting a device in 367 a car dock make the accelerometer more a physical input (like a lid). --> 368 <bool name="config_carDockEnablesAccelerometer">true</bool> 369 370 <!-- Indicate whether the lid state impacts the accessibility of 371 the physical keyboard. 0 means it doesn't, 1 means it is accessible 372 when the lid is open, 2 means it is accessible when the lid is 373 closed. The default is 1. --> 374 <integer name="config_lidKeyboardAccessibility">1</integer> 375 376 <!-- Indicate whether the lid state impacts the accessibility of 377 the physical keyboard. 0 means it doesn't, 1 means it is accessible 378 when the lid is open, 2 means it is accessible when the lid is 379 closed. The default is 0. --> 380 <integer name="config_lidNavigationAccessibility">0</integer> 381 382 <!-- Control the behavior when the user long presses the power button. 383 0 - Nothing 384 1 - Global actions menu 385 2 - Power off (with confirmation) 386 --> 387 <integer name="config_longPressOnPowerBehavior">1</integer> 388 389 <!-- Indicate whether the SD card is accessible without removing the battery. --> 390 <bool name="config_batterySdCardAccessibility">false</bool> 391 392 <!-- List of file paths for USB host busses to exclude from USB host support. 393 For example, if the first USB bus on the device is used to communicate 394 with the modem or some other restricted hardware, add "/dev/bus/usb/001/" 395 to this list. If this is empty, no parts of the host USB bus will be excluded. 396 --> 397 <string-array name="config_usbHostBlacklist" translatable="false"> 398 </string-array> 399 400 <!-- List of paths to serial ports that are available to the serial manager. 401 for example, /dev/ttyUSB0 402 --> 403 <string-array translatable="false" name="config_serialPorts"> 404 </string-array> 405 406 <!-- Vibrator pattern for feedback about a long screen/key press --> 407 <integer-array name="config_longPressVibePattern"> 408 <item>0</item> 409 <item>1</item> 410 <item>20</item> 411 <item>21</item> 412 </integer-array> 413 414 <!-- Vibrator pattern for feedback about touching a virtual key --> 415 <integer-array name="config_virtualKeyVibePattern"> 416 <item>0</item> 417 <item>10</item> 418 <item>20</item> 419 <item>30</item> 420 </integer-array> 421 422 <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> 423 <integer-array name="config_keyboardTapVibePattern"> 424 <item>40</item> 425 </integer-array> 426 427 <!-- Vibrator pattern for feedback about booting with safe mode disabled --> 428 <integer-array name="config_safeModeDisabledVibePattern"> 429 <item>0</item> 430 <item>1</item> 431 <item>20</item> 432 <item>21</item> 433 </integer-array> 434 435 <!-- Vibrator pattern for feedback about booting with safe mode disabled --> 436 <integer-array name="config_safeModeEnabledVibePattern"> 437 <item>0</item> 438 <item>1</item> 439 <item>20</item> 440 <item>21</item> 441 <item>500</item> 442 <item>600</item> 443 </integer-array> 444 445 <!-- Vibrator pattern for feedback about hitting a scroll barrier --> 446 <integer-array name="config_scrollBarrierVibePattern"> 447 <item>0</item> 448 <item>15</item> 449 <item>10</item> 450 <item>10</item> 451 </integer-array> 452 453 <bool name="config_use_strict_phone_number_comparation">false</bool> 454 455 <!-- Display low battery warning when battery level dips to this value. 456 Also, the battery stats are flushed to disk when we hit this level. --> 457 <integer name="config_criticalBatteryWarningLevel">4</integer> 458 459 <!-- Display low battery warning when battery level dips to this value --> 460 <!-- Display low battery warning when battery level dips to this value --> 461 <integer name="config_lowBatteryWarningLevel">15</integer> 462 463 <!-- Close low battery warning when battery level reaches this value --> 464 <integer name="config_lowBatteryCloseWarningLevel">20</integer> 465 466 <!-- Default color for notification LED. --> 467 <color name="config_defaultNotificationColor">#ff00ff00</color> 468 469 <!-- Default LED on time for notification LED in milliseconds. --> 470 <integer name="config_defaultNotificationLedOn">500</integer> 471 472 <!-- Default LED off time for notification LED in milliseconds. --> 473 <integer name="config_defaultNotificationLedOff">2000</integer> 474 475 <!-- Default value for led color when battery is low on charge --> 476 <integer name="config_notificationsBatteryLowARGB">0xFFFF0000</integer> 477 478 <!-- Default value for led color when battery is medium charged --> 479 <integer name="config_notificationsBatteryMediumARGB">0xFFFFFF00</integer> 480 481 <!-- Default value for led color when battery is fully charged --> 482 <integer name="config_notificationsBatteryFullARGB">0xFF00FF00</integer> 483 484 <!-- Default value for LED on time when the battery is low on charge in miliseconds --> 485 <integer name="config_notificationsBatteryLedOn">125</integer> 486 487 <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> 488 <bool name="config_intrusiveNotificationLed">false</bool> 489 490 <!-- Default value for LED off time when the battery is low on charge in miliseconds --> 491 <integer name="config_notificationsBatteryLedOff">2875</integer> 492 493 <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> 494 <bool name="config_disableMenuKeyInLockScreen">false</bool> 495 496 <!-- Don't show lock screen before unlock screen (PIN/pattern/password) --> 497 <bool name="config_enableLockBeforeUnlockScreen">false</bool> 498 499 <!-- Diable lockscreen rotation by default --> 500 <bool name="config_enableLockScreenRotation">false</bool> 501 502 <!-- Enable puk unlockscreen by default. 503 If unlock screen is disabled, the puk should be unlocked through Emergency Dialer --> 504 <bool name="config_enable_puk_unlock_screen">true</bool> 505 506 <!-- Enable emergency call when sim is locked or puk locked. Some countries/carriers do not 507 allow emergency calls to be placed without the IMSI, which is locked in the SIM. 508 If so, this should be set to 'false' in an overlay. --> 509 <bool name="config_enable_emergency_call_while_sim_locked">true</bool> 510 511 <!-- Control the behavior when the user long presses the home button. 512 0 - Nothing 513 1 - Recent apps dialog 514 2 - Recent apps view in SystemUI 515 3 - Voice search 516 This needs to match the constants in 517 policy/src/com/android/internal/policy/impl/PhoneWindowManager.java 518 --> 519 <integer name="config_longPressOnHomeBehavior">2</integer> 520 521 <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. 522 The N entries of this array define N + 1 zones as follows: 523 524 Zone 0: 0 <= LUX < array[0] 525 Zone 1: array[0] <= LUX < array[1] 526 ... 527 Zone N: array[N - 1] <= LUX < array[N] 528 Zone N + 1: array[N] <= LUX < infinity 529 530 Must be overridden in platform specific overlays --> 531 <integer-array name="config_autoBrightnessLevels"> 532 </integer-array> 533 534 535 <!-- Minimum screen brightness allowed by the power manager. --> 536 <integer name="config_screenBrightnessDim">20</integer> 537 538 <!-- Array of output values for LCD backlight corresponding to the LUX values 539 in the config_autoBrightnessLevels array. This array should have size one greater 540 than the size of the config_autoBrightnessLevels array. 541 This must be overridden in platform specific overlays --> 542 <integer-array name="config_autoBrightnessLcdBacklightValues"> 543 </integer-array> 544 545 <!-- Array of output values for button backlight corresponding to the LUX values 546 in the config_autoBrightnessLevels array. This array should have size one greater 547 than the size of the config_autoBrightnessLevels array. 548 This must be overridden in platform specific overlays --> 549 <integer-array name="config_autoBrightnessButtonBacklightValues"> 550 </integer-array> 551 552 <!-- Array of output values for keyboard backlight corresponding to the LUX values 553 in the config_autoBrightnessLevels array. This array should have size one greater 554 than the size of the config_autoBrightnessLevels array. 555 This must be overridden in platform specific overlays --> 556 <integer-array name="config_autoBrightnessKeyboardBacklightValues"> 557 </integer-array> 558 559 <!-- Amount of time it takes for the light sensor to warm up in milliseconds. 560 For this time after the screen turns on, the Power Manager 561 will not debounce light sensor readings --> 562 <integer name="config_lightSensorWarmupTime">0</integer> 563 564 <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView --> 565 <bool name="config_swipeDisambiguation">true</bool> 566 567 <!-- Specifies the amount of time to disable virtual keys after the screen is touched 568 in order to filter out accidental virtual key presses due to swiping gestures 569 or taps near the edge of the display. May be 0 to disable the feature. 570 It is recommended that this value be no more than 250 ms. 571 This feature should be disabled for most devices. --> 572 <integer name="config_virtualKeyQuietTimeMillis">0</integer> 573 574 <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 575 specified --> 576 <string name="default_wallpaper_component" translatable="false">@null</string> 577 578 <!-- True if WallpaperService is enabled --> 579 <bool name="config_enableWallpaperService">true</bool> 580 581 <!-- Component name of the service providing network location support. --> 582 <string name="config_networkLocationProvider" translatable="false">@null</string> 583 584 <!-- Component name of the service providing geocoder API support. --> 585 <string name="config_geocodeProvider" translatable="false">@null</string> 586 587 <!-- Boolean indicating if current platform supports bluetooth SCO for off call 588 use cases --> 589 <bool name="config_bluetooth_sco_off_call">true</bool> 590 591 <!-- Boolean indicating if current platform supports bluetooth wide band 592 speech --> 593 <bool name="config_bluetooth_wide_band_speech">true</bool> 594 595 <!-- Boolean indicating if current platform supports quick switch-on/off of 596 Bluetooth Module --> 597 <bool name="config_bluetooth_adapter_quick_switch">true</bool> 598 599 <!-- The default data-use polling period. --> 600 <integer name="config_datause_polling_period_sec">600</integer> 601 602 <!-- The default data-use threshold in bytes. 0 disables--> 603 <integer name="config_datause_threshold_bytes">0</integer> 604 605 <!-- The default reduced-datarate value in kilobits per sec --> 606 <integer name="config_datause_throttle_kbitsps">300</integer> 607 608 <!-- The default iface on which to monitor data use --> 609 <string name="config_datause_iface" translatable="false">rmnet0</string> 610 611 <!-- The default reduced-datarate notification mask --> 612 <!-- 2 means give warning --> 613 <integer name="config_datause_notification_type">2</integer> 614 615 <!-- Flag indicating whether the current device is "voice capable". 616 If true, this means that the device supports circuit-switched 617 (i.e. voice) phone calls over the telephony network, and is 618 allowed to display the in-call UI while a cellular voice call is 619 active. This can be overridden to false for "data only" devices 620 which can't make voice calls and don't support any in-call UI. 621 622 Note: this flag is subtly different from the 623 PackageManager.FEATURE_TELEPHONY system feature, which is 624 available on *any* device with a telephony radio, even if the 625 device is data-only. --> 626 <bool name="config_voice_capable">true</bool> 627 628 <!-- Flag indicating whether the current device allows sms service. 629 If true, this means that the device supports both sending and 630 receiving sms via the telephony network. 631 This can be overridden to false for "data only" devices 632 which can't send and receive sms message. 633 634 Note: Disable SMS also disable voicemail waiting sms, 635 cell broadcasting sms, and MMS. --> 636 <bool name="config_sms_capable">true</bool> 637 638 <!-- IP address of the dns server to use if nobody else suggests one --> 639 <string name="config_default_dns_server" translatable="false">8.8.8.8</string> 640 641 <!-- The default character set for GsmAlphabet --> 642 <!-- Empty string means MBCS is not considered --> 643 <string name="gsm_alphabet_default_charset" translatable="false"></string> 644 645 <!-- Enables SIP on WIFI only --> 646 <bool name="config_sip_wifi_only">false</bool> 647 648 <!-- Enables built-in SIP phone capability --> 649 <bool name="config_built_in_sip_phone">true</bool> 650 651 <!-- Boolean indicating if restoring network selection should be skipped --> 652 <!-- The restoring is handled by modem if it is true--> 653 <bool translatable="false" name="skip_restoring_network_selection">false</bool> 654 655 <!-- Maximum number of database connections opened and managed by framework layer 656 to handle queries on each database when using Write-Ahead Logging. --> 657 <integer name="db_connection_pool_size">4</integer> 658 659 <!-- The default journal mode to use use when Write-Ahead Logging is not active. 660 Choices are: OFF, DELETE, TRUNCATE, PERSIST and MEMORY. 661 PERSIST may improve performance by reducing how often journal blocks are 662 reallocated (compared to truncation) resulting in better data block locality 663 and less churn of the storage media. --> 664 <string name="db_default_journal_mode">PERSIST</string> 665 666 <!-- Maximum size of the persistent journal file in bytes. 667 If the journal file grows to be larger than this amount then SQLite will 668 truncate it after committing the transaction. --> 669 <integer name="db_journal_size_limit">524288</integer> 670 671 <!-- The database synchronization mode when using the default journal mode. 672 FULL is safest and preserves durability at the cost of extra fsyncs. 673 NORMAL also preserves durability in non-WAL modes and uses checksums to ensure 674 integrity although there is a small chance that an error might go unnoticed. 675 Choices are: FULL, NORMAL, OFF. --> 676 <string name="db_default_sync_mode">FULL</string> 677 678 <!-- The database synchronization mode when using Write-Ahead Logging. 679 FULL is safest and preserves durability at the cost of extra fsyncs. 680 NORMAL sacrifices durability in WAL mode because syncs are only performed before 681 and after checkpoint operations. If checkpoints are infrequent and power loss 682 occurs, then committed transactions could be lost and applications might break. 683 Choices are: FULL, NORMAL, OFF. --> 684 <string name="db_wal_sync_mode">FULL</string> 685 686 <!-- The Write-Ahead Log auto-checkpoint interval in database pages (typically 1 to 4KB). 687 The log is checkpointed automatically whenever it exceeds this many pages. 688 When a database is reopened, its journal mode is set back to the default 689 journal mode, which may cause a checkpoint operation to occur. Checkpoints 690 can also happen at other times when transactions are committed. 691 The bigger the WAL file, the longer a checkpoint operation takes, so we try 692 to keep the WAL file relatively small to avoid long delays. 693 The size of the WAL file is also constrained by 'db_journal_size_limit'. --> 694 <integer name="db_wal_autocheckpoint">100</integer> 695 696 <!-- Max space (in MB) allocated to DownloadManager to store the downloaded 697 files if they are to be stored in DownloadManager's data dir, 698 which typically is /data/data/com.android.providers.downloads/files --> 699 <integer name="config_downloadDataDirSize">100</integer> 700 701 <!-- Max number of downloads allowed to proceed concurrently --> 702 <integer name="config_MaxConcurrentDownloadsAllowed">5</integer> 703 704 <!-- When the free space available in DownloadManager's data dir falls 705 below the percentage value specified by this param, DownloadManager 706 starts removing files to try to make percentage of available 707 free space above this threshold value. --> 708 <integer name="config_downloadDataDirLowSpaceThreshold">10</integer> 709 710 <!-- The URL that should be sent in an x-wap-profile header with an HTTP request, 711 as defined in the Open Mobile Alliance User Agent Profile specification 712 OMA-TS-UAProf-V2_0-20060206-A Section 8.1.1.1. If the URL contains a '%s' 713 format string then that substring will be replaced with the value of 714 Build.MODEL. The format string shall not be escaped. --> 715 <string name="config_useragentprofile_url" translatable="false"></string> 716 717 <!-- When a database query is executed, the results retuned are paginated 718 in pages of size (in KB) indicated by this value --> 719 <integer name="config_cursorWindowSize">2048</integer> 720 721 <!-- Sets whether menu shortcuts should be displayed on panel menus when 722 a keyboard is present. --> 723 <bool name="config_showMenuShortcutsWhenKeyboardPresent">false</bool> 724 725 <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD --> 726 <string-array name="config_twoDigitNumberPattern" translatable="false"> 727 </string-array> 728 729 <!-- The VoiceMail default value is displayed to my own number if it is true --> 730 <bool name="config_telephony_use_own_number_for_voicemail">false</bool> 731 732 <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder. 733 If false, decoded by Latin decoder. --> 734 <bool name="config_sms_utf8_support">false</bool> 735 736 <!-- If this value is true, The mms content-disposition field is supported correctly. 737 If false, Content-disposition fragments are ignored --> 738 <bool name="config_mms_content_disposition_support">true</bool> 739 740 <!-- National Language Identifier codes for the following two config items. 741 (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1): 742 0 - reserved 743 1 - Turkish 744 2 - Spanish (single shift table only) 745 3 - Portuguese 746 4 - Bengali 747 5 - Gujarati 748 6 - Hindi 749 7 - Kannada 750 8 - Malayalam 751 9 - Oriya 752 10 - Punjabi 753 11 - Tamil 754 12 - Telugu 755 13 - Urdu 756 14+ - reserved --> 757 758 <!-- National language single shift tables to enable for SMS encoding. 759 Decoding is always enabled. 3GPP TS 23.038 states that this feature 760 should not be enabled until a formal request is issued by the relevant 761 national regulatory body. Array elements are codes from the table above. 762 Example 1: devices sold in Turkey must include table 1 to conform with 763 By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) 764 Example 2: devices sold in India should include tables 4 through 13 765 to enable use of the new Release 9 tables for Indic languages. --> 766 <integer-array name="config_sms_enabled_single_shift_tables"></integer-array> 767 768 <!-- National language locking shift tables to enable for SMS encoding. 769 Decoding is always enabled. 3GPP TS 23.038 states that this feature 770 should not be enabled until a formal request is issued by the relevant 771 national regulatory body. Array elements are codes from the table above. 772 Example 1: devices sold in Turkey must include table 1 after the 773 Turkish Telecommunication Authority requires locking shift encoding 774 to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) 775 See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014 776 Example 2: devices sold in India should include tables 4 through 13 777 to enable use of the new Release 9 tables for Indic languages. --> 778 <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array> 779 780 <!-- Set to true if the RSSI should always display CDMA signal strength even on EVDO --> 781 <bool name="config_alwaysUseCdmaRssi">false</bool> 782 783 784 <!-- If this value is true, duplicate Source/Destination port fields 785 in WDP header of some carriers OMADM wap push are supported. 786 ex: MSGTYPE-TotalSegments-CurrentSegment 787 -SourcePortDestPort-SourcePortDestPort-OMADM PDU 788 If false, not supported. --> 789 <bool name="config_duplicate_port_omadm_wappush">false</bool> 790 791 <!-- Maximum numerical value that will be shown in a status bar 792 notification icon or in the notification itself. Will be replaced 793 with @string/status_bar_notification_info_overflow when shown in the 794 UI. --> 795 <integer name="status_bar_notification_info_maxnum">999</integer> 796 797 <!-- Path to an ISO image to be shared with via USB mass storage. 798 This is intended to allow packaging drivers or tools for installation on a PC. --> 799 <string translatable="false" name="config_isoImagePath"></string> 800 801 <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be 802 autodetected from the Configuration. --> 803 <bool name="config_showNavigationBar">false</bool> 804 805 <!-- Whether action menu items should be displayed in ALLCAPS or not. 806 Defaults to true. If this is not appropriate for specific locales 807 it should be disabled in that locale's resources. --> 808 <bool name="config_actionMenuItemAllCaps">true</bool> 809 810 <!-- Whether action menu items should obey the "withText" showAsAction 811 flag. This may be set to false for situations where space is 812 extremely limited. --> 813 <bool name="config_allowActionMenuItemTextWithIcon">false</bool> 814 815 <!-- Remote server that can provide NTP responses. --> 816 <string translatable="false" name="config_ntpServer">pool.ntp.org</string> 817 <!-- Timeout to wait for NTP server response. --> 818 <integer name="config_ntpTimeout">20000</integer> 819 820 <!-- Default network policy warning threshold, in megabytes. --> 821 <integer name="config_networkPolicyDefaultWarning">2048</integer> 822 823 <!-- Set and Unsets WiMAX --> 824 <bool name="config_wimaxEnabled">false</bool> 825 <!-- Location of the wimax framwork jar location --> 826 <string name="config_wimaxServiceJarLocation" translatable="false"></string> 827 <!-- Location of the wimax native library locaiton --> 828 <string name="config_wimaxNativeLibLocation" translatable="false"></string> 829 <!-- Name of the wimax manager class --> 830 <string name="config_wimaxManagerClassname" translatable="false"></string> 831 <!-- Name of the wimax service class --> 832 <string name="config_wimaxServiceClassname" translatable="false"></string> 833 <!-- Name of the wimax state tracker clas --> 834 <string name="config_wimaxStateTrackerClassname" translatable="false"></string> 835 836 <!-- Name of screensaver components to look for if none has been chosen by the user --> 837 <string name="config_defaultDreamComponent" translatable="false">com.google.android.deskclock/com.android.deskclock.Screensaver</string> 838 839 <!-- Base "touch slop" value used by ViewConfiguration as a 840 movement threshold where scrolling should begin. --> 841 <dimen name="config_viewConfigurationTouchSlop">8dp</dimen> 842 843 <!-- Array of OEM specific USB mode override config. 844 OEM can override a certain USB mode depending on ro.bootmode. 845 Specify an array of below items to set override rule. 846 [bootmode]:[original USB mode]:[USB mode used]--> 847 <integer-array translatable="false" name="config_oemUsbModeOverride"> 848 </integer-array> 849</resources> 850