1/* 2 * This file was generated automatically by gen-mterp.py for 'x86-atom'. 3 * 4 * --> DO NOT EDIT <-- 5 */ 6 7/* File: c/header.c */ 8/* 9 * Copyright (C) 2008 The Android Open Source Project 10 * 11 * Licensed under the Apache License, Version 2.0 (the "License"); 12 * you may not use this file except in compliance with the License. 13 * You may obtain a copy of the License at 14 * 15 * http://www.apache.org/licenses/LICENSE-2.0 16 * 17 * Unless required by applicable law or agreed to in writing, software 18 * distributed under the License is distributed on an "AS IS" BASIS, 19 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 20 * See the License for the specific language governing permissions and 21 * limitations under the License. 22 */ 23 24/* common includes */ 25#include "Dalvik.h" 26#include "interp/InterpDefs.h" 27#include "mterp/Mterp.h" 28#include <math.h> // needed for fmod, fmodf 29#include "mterp/common/FindInterface.h" 30 31/* 32 * Configuration defines. These affect the C implementations, i.e. the 33 * portable interpreter(s) and C stubs. 34 * 35 * Some defines are controlled by the Makefile, e.g.: 36 * WITH_INSTR_CHECKS 37 * WITH_TRACKREF_CHECKS 38 * EASY_GDB 39 * NDEBUG 40 * 41 * If THREADED_INTERP is not defined, we use a classic "while true / switch" 42 * interpreter. If it is defined, then the tail end of each instruction 43 * handler fetches the next instruction and jumps directly to the handler. 44 * This increases the size of the "Std" interpreter by about 10%, but 45 * provides a speedup of about the same magnitude. 46 * 47 * There's a "hybrid" approach that uses a goto table instead of a switch 48 * statement, avoiding the "is the opcode in range" tests required for switch. 49 * The performance is close to the threaded version, and without the 10% 50 * size increase, but the benchmark results are off enough that it's not 51 * worth adding as a third option. 52 */ 53#define THREADED_INTERP /* threaded vs. while-loop interpreter */ 54 55#ifdef WITH_INSTR_CHECKS /* instruction-level paranoia (slow!) */ 56# define CHECK_BRANCH_OFFSETS 57# define CHECK_REGISTER_INDICES 58#endif 59 60/* 61 * ARM EABI requires 64-bit alignment for access to 64-bit data types. We 62 * can't just use pointers to copy 64-bit values out of our interpreted 63 * register set, because gcc will generate ldrd/strd. 64 * 65 * The __UNION version copies data in and out of a union. The __MEMCPY 66 * version uses a memcpy() call to do the transfer; gcc is smart enough to 67 * not actually call memcpy(). The __UNION version is very bad on ARM; 68 * it only uses one more instruction than __MEMCPY, but for some reason 69 * gcc thinks it needs separate storage for every instance of the union. 70 * On top of that, it feels the need to zero them out at the start of the 71 * method. Net result is we zero out ~700 bytes of stack space at the top 72 * of the interpreter using ARM STM instructions. 73 */ 74#if defined(__ARM_EABI__) 75//# define NO_UNALIGN_64__UNION 76# define NO_UNALIGN_64__MEMCPY 77#endif 78 79//#define LOG_INSTR /* verbose debugging */ 80/* set and adjust ANDROID_LOG_TAGS='*:i jdwp:i dalvikvm:i dalvikvmi:i' */ 81 82/* 83 * Keep a tally of accesses to fields. Currently only works if full DEX 84 * optimization is disabled. 85 */ 86#ifdef PROFILE_FIELD_ACCESS 87# define UPDATE_FIELD_GET(_field) { (_field)->gets++; } 88# define UPDATE_FIELD_PUT(_field) { (_field)->puts++; } 89#else 90# define UPDATE_FIELD_GET(_field) ((void)0) 91# define UPDATE_FIELD_PUT(_field) ((void)0) 92#endif 93 94/* 95 * Export another copy of the PC on every instruction; this is largely 96 * redundant with EXPORT_PC and the debugger code. This value can be 97 * compared against what we have stored on the stack with EXPORT_PC to 98 * help ensure that we aren't missing any export calls. 99 */ 100#if WITH_EXTRA_GC_CHECKS > 1 101# define EXPORT_EXTRA_PC() (self->currentPc2 = pc) 102#else 103# define EXPORT_EXTRA_PC() 104#endif 105 106/* 107 * Adjust the program counter. "_offset" is a signed int, in 16-bit units. 108 * 109 * Assumes the existence of "const u2* pc" and "const u2* curMethod->insns". 110 * 111 * We don't advance the program counter until we finish an instruction or 112 * branch, because we do want to have to unroll the PC if there's an 113 * exception. 114 */ 115#ifdef CHECK_BRANCH_OFFSETS 116# define ADJUST_PC(_offset) do { \ 117 int myoff = _offset; /* deref only once */ \ 118 if (pc + myoff < curMethod->insns || \ 119 pc + myoff >= curMethod->insns + dvmGetMethodInsnsSize(curMethod)) \ 120 { \ 121 char* desc; \ 122 desc = dexProtoCopyMethodDescriptor(&curMethod->prototype); \ 123 LOGE("Invalid branch %d at 0x%04x in %s.%s %s\n", \ 124 myoff, (int) (pc - curMethod->insns), \ 125 curMethod->clazz->descriptor, curMethod->name, desc); \ 126 free(desc); \ 127 dvmAbort(); \ 128 } \ 129 pc += myoff; \ 130 EXPORT_EXTRA_PC(); \ 131 } while (false) 132#else 133# define ADJUST_PC(_offset) do { \ 134 pc += _offset; \ 135 EXPORT_EXTRA_PC(); \ 136 } while (false) 137#endif 138 139/* 140 * If enabled, log instructions as we execute them. 141 */ 142#ifdef LOG_INSTR 143# define ILOGD(...) ILOG(LOG_DEBUG, __VA_ARGS__) 144# define ILOGV(...) ILOG(LOG_VERBOSE, __VA_ARGS__) 145# define ILOG(_level, ...) do { \ 146 char debugStrBuf[128]; \ 147 snprintf(debugStrBuf, sizeof(debugStrBuf), __VA_ARGS__); \ 148 if (curMethod != NULL) \ 149 LOG(_level, LOG_TAG"i", "%-2d|%04x%s\n", \ 150 self->threadId, (int)(pc - curMethod->insns), debugStrBuf); \ 151 else \ 152 LOG(_level, LOG_TAG"i", "%-2d|####%s\n", \ 153 self->threadId, debugStrBuf); \ 154 } while(false) 155void dvmDumpRegs(const Method* method, const u4* framePtr, bool inOnly); 156# define DUMP_REGS(_meth, _frame, _inOnly) dvmDumpRegs(_meth, _frame, _inOnly) 157static const char kSpacing[] = " "; 158#else 159# define ILOGD(...) ((void)0) 160# define ILOGV(...) ((void)0) 161# define DUMP_REGS(_meth, _frame, _inOnly) ((void)0) 162#endif 163 164/* get a long from an array of u4 */ 165static inline s8 getLongFromArray(const u4* ptr, int idx) 166{ 167#if defined(NO_UNALIGN_64__UNION) 168 union { s8 ll; u4 parts[2]; } conv; 169 170 ptr += idx; 171 conv.parts[0] = ptr[0]; 172 conv.parts[1] = ptr[1]; 173 return conv.ll; 174#elif defined(NO_UNALIGN_64__MEMCPY) 175 s8 val; 176 memcpy(&val, &ptr[idx], 8); 177 return val; 178#else 179 return *((s8*) &ptr[idx]); 180#endif 181} 182 183/* store a long into an array of u4 */ 184static inline void putLongToArray(u4* ptr, int idx, s8 val) 185{ 186#if defined(NO_UNALIGN_64__UNION) 187 union { s8 ll; u4 parts[2]; } conv; 188 189 ptr += idx; 190 conv.ll = val; 191 ptr[0] = conv.parts[0]; 192 ptr[1] = conv.parts[1]; 193#elif defined(NO_UNALIGN_64__MEMCPY) 194 memcpy(&ptr[idx], &val, 8); 195#else 196 *((s8*) &ptr[idx]) = val; 197#endif 198} 199 200/* get a double from an array of u4 */ 201static inline double getDoubleFromArray(const u4* ptr, int idx) 202{ 203#if defined(NO_UNALIGN_64__UNION) 204 union { double d; u4 parts[2]; } conv; 205 206 ptr += idx; 207 conv.parts[0] = ptr[0]; 208 conv.parts[1] = ptr[1]; 209 return conv.d; 210#elif defined(NO_UNALIGN_64__MEMCPY) 211 double dval; 212 memcpy(&dval, &ptr[idx], 8); 213 return dval; 214#else 215 return *((double*) &ptr[idx]); 216#endif 217} 218 219/* store a double into an array of u4 */ 220static inline void putDoubleToArray(u4* ptr, int idx, double dval) 221{ 222#if defined(NO_UNALIGN_64__UNION) 223 union { double d; u4 parts[2]; } conv; 224 225 ptr += idx; 226 conv.d = dval; 227 ptr[0] = conv.parts[0]; 228 ptr[1] = conv.parts[1]; 229#elif defined(NO_UNALIGN_64__MEMCPY) 230 memcpy(&ptr[idx], &dval, 8); 231#else 232 *((double*) &ptr[idx]) = dval; 233#endif 234} 235 236/* 237 * If enabled, validate the register number on every access. Otherwise, 238 * just do an array access. 239 * 240 * Assumes the existence of "u4* fp". 241 * 242 * "_idx" may be referenced more than once. 243 */ 244#ifdef CHECK_REGISTER_INDICES 245# define GET_REGISTER(_idx) \ 246 ( (_idx) < curMethod->registersSize ? \ 247 (fp[(_idx)]) : (assert(!"bad reg"),1969) ) 248# define SET_REGISTER(_idx, _val) \ 249 ( (_idx) < curMethod->registersSize ? \ 250 (fp[(_idx)] = (u4)(_val)) : (assert(!"bad reg"),1969) ) 251# define GET_REGISTER_AS_OBJECT(_idx) ((Object *)GET_REGISTER(_idx)) 252# define SET_REGISTER_AS_OBJECT(_idx, _val) SET_REGISTER(_idx, (s4)_val) 253# define GET_REGISTER_INT(_idx) ((s4) GET_REGISTER(_idx)) 254# define SET_REGISTER_INT(_idx, _val) SET_REGISTER(_idx, (s4)_val) 255# define GET_REGISTER_WIDE(_idx) \ 256 ( (_idx) < curMethod->registersSize-1 ? \ 257 getLongFromArray(fp, (_idx)) : (assert(!"bad reg"),1969) ) 258# define SET_REGISTER_WIDE(_idx, _val) \ 259 ( (_idx) < curMethod->registersSize-1 ? \ 260 putLongToArray(fp, (_idx), (_val)) : (assert(!"bad reg"),1969) ) 261# define GET_REGISTER_FLOAT(_idx) \ 262 ( (_idx) < curMethod->registersSize ? \ 263 (*((float*) &fp[(_idx)])) : (assert(!"bad reg"),1969.0f) ) 264# define SET_REGISTER_FLOAT(_idx, _val) \ 265 ( (_idx) < curMethod->registersSize ? \ 266 (*((float*) &fp[(_idx)]) = (_val)) : (assert(!"bad reg"),1969.0f) ) 267# define GET_REGISTER_DOUBLE(_idx) \ 268 ( (_idx) < curMethod->registersSize-1 ? \ 269 getDoubleFromArray(fp, (_idx)) : (assert(!"bad reg"),1969.0) ) 270# define SET_REGISTER_DOUBLE(_idx, _val) \ 271 ( (_idx) < curMethod->registersSize-1 ? \ 272 putDoubleToArray(fp, (_idx), (_val)) : (assert(!"bad reg"),1969.0) ) 273#else 274# define GET_REGISTER(_idx) (fp[(_idx)]) 275# define SET_REGISTER(_idx, _val) (fp[(_idx)] = (_val)) 276# define GET_REGISTER_AS_OBJECT(_idx) ((Object*) fp[(_idx)]) 277# define SET_REGISTER_AS_OBJECT(_idx, _val) (fp[(_idx)] = (u4)(_val)) 278# define GET_REGISTER_INT(_idx) ((s4)GET_REGISTER(_idx)) 279# define SET_REGISTER_INT(_idx, _val) SET_REGISTER(_idx, (s4)_val) 280# define GET_REGISTER_WIDE(_idx) getLongFromArray(fp, (_idx)) 281# define SET_REGISTER_WIDE(_idx, _val) putLongToArray(fp, (_idx), (_val)) 282# define GET_REGISTER_FLOAT(_idx) (*((float*) &fp[(_idx)])) 283# define SET_REGISTER_FLOAT(_idx, _val) (*((float*) &fp[(_idx)]) = (_val)) 284# define GET_REGISTER_DOUBLE(_idx) getDoubleFromArray(fp, (_idx)) 285# define SET_REGISTER_DOUBLE(_idx, _val) putDoubleToArray(fp, (_idx), (_val)) 286#endif 287 288/* 289 * Get 16 bits from the specified offset of the program counter. We always 290 * want to load 16 bits at a time from the instruction stream -- it's more 291 * efficient than 8 and won't have the alignment problems that 32 might. 292 * 293 * Assumes existence of "const u2* pc". 294 */ 295#define FETCH(_offset) (pc[(_offset)]) 296 297/* 298 * Extract instruction byte from 16-bit fetch (_inst is a u2). 299 */ 300#define INST_INST(_inst) ((_inst) & 0xff) 301 302/* 303 * Replace the opcode (used when handling breakpoints). _opcode is a u1. 304 */ 305#define INST_REPLACE_OP(_inst, _opcode) (((_inst) & 0xff00) | _opcode) 306 307/* 308 * Extract the "vA, vB" 4-bit registers from the instruction word (_inst is u2). 309 */ 310#define INST_A(_inst) (((_inst) >> 8) & 0x0f) 311#define INST_B(_inst) ((_inst) >> 12) 312 313/* 314 * Get the 8-bit "vAA" 8-bit register index from the instruction word. 315 * (_inst is u2) 316 */ 317#define INST_AA(_inst) ((_inst) >> 8) 318 319/* 320 * The current PC must be available to Throwable constructors, e.g. 321 * those created by dvmThrowException(), so that the exception stack 322 * trace can be generated correctly. If we don't do this, the offset 323 * within the current method won't be shown correctly. See the notes 324 * in Exception.c. 325 * 326 * This is also used to determine the address for precise GC. 327 * 328 * Assumes existence of "u4* fp" and "const u2* pc". 329 */ 330#define EXPORT_PC() (SAVEAREA_FROM_FP(fp)->xtra.currentPc = pc) 331 332/* 333 * Determine if we need to switch to a different interpreter. "_current" 334 * is either INTERP_STD or INTERP_DBG. It should be fixed for a given 335 * interpreter generation file, which should remove the outer conditional 336 * from the following. 337 * 338 * If we're building without debug and profiling support, we never switch. 339 */ 340#if defined(WITH_JIT) 341# define NEED_INTERP_SWITCH(_current) ( \ 342 (_current == INTERP_STD) ? \ 343 dvmJitDebuggerOrProfilerActive() : !dvmJitDebuggerOrProfilerActive() ) 344#else 345# define NEED_INTERP_SWITCH(_current) ( \ 346 (_current == INTERP_STD) ? \ 347 dvmDebuggerOrProfilerActive() : !dvmDebuggerOrProfilerActive() ) 348#endif 349 350/* 351 * Check to see if "obj" is NULL. If so, throw an exception. Assumes the 352 * pc has already been exported to the stack. 353 * 354 * Perform additional checks on debug builds. 355 * 356 * Use this to check for NULL when the instruction handler calls into 357 * something that could throw an exception (so we have already called 358 * EXPORT_PC at the top). 359 */ 360static inline bool checkForNull(Object* obj) 361{ 362 if (obj == NULL) { 363 dvmThrowException("Ljava/lang/NullPointerException;", NULL); 364 return false; 365 } 366#ifdef WITH_EXTRA_OBJECT_VALIDATION 367 if (!dvmIsValidObject(obj)) { 368 LOGE("Invalid object %p\n", obj); 369 dvmAbort(); 370 } 371#endif 372#ifndef NDEBUG 373 if (obj->clazz == NULL || ((u4) obj->clazz) <= 65536) { 374 /* probable heap corruption */ 375 LOGE("Invalid object class %p (in %p)\n", obj->clazz, obj); 376 dvmAbort(); 377 } 378#endif 379 return true; 380} 381 382/* 383 * Check to see if "obj" is NULL. If so, export the PC into the stack 384 * frame and throw an exception. 385 * 386 * Perform additional checks on debug builds. 387 * 388 * Use this to check for NULL when the instruction handler doesn't do 389 * anything else that can throw an exception. 390 */ 391static inline bool checkForNullExportPC(Object* obj, u4* fp, const u2* pc) 392{ 393 if (obj == NULL) { 394 EXPORT_PC(); 395 dvmThrowException("Ljava/lang/NullPointerException;", NULL); 396 return false; 397 } 398#ifdef WITH_EXTRA_OBJECT_VALIDATION 399 if (!dvmIsValidObject(obj)) { 400 LOGE("Invalid object %p\n", obj); 401 dvmAbort(); 402 } 403#endif 404#ifndef NDEBUG 405 if (obj->clazz == NULL || ((u4) obj->clazz) <= 65536) { 406 /* probable heap corruption */ 407 LOGE("Invalid object class %p (in %p)\n", obj->clazz, obj); 408 dvmAbort(); 409 } 410#endif 411 return true; 412} 413 414/* File: cstubs/stubdefs.c */ 415/* this is a standard (no debug support) interpreter */ 416#define INTERP_TYPE INTERP_STD 417#define CHECK_DEBUG_AND_PROF() ((void)0) 418# define CHECK_TRACKED_REFS() ((void)0) 419#define CHECK_JIT_BOOL() (false) 420#define CHECK_JIT_VOID() 421#define ABORT_JIT_TSELECT() ((void)0) 422 423/* 424 * In the C mterp stubs, "goto" is a function call followed immediately 425 * by a return. 426 */ 427 428#define GOTO_TARGET_DECL(_target, ...) \ 429 void dvmMterp_##_target(MterpGlue* glue, ## __VA_ARGS__); 430 431#define GOTO_TARGET(_target, ...) \ 432 void dvmMterp_##_target(MterpGlue* glue, ## __VA_ARGS__) { \ 433 u2 ref, vsrc1, vsrc2, vdst; \ 434 u2 inst = FETCH(0); \ 435 const Method* methodToCall; \ 436 StackSaveArea* debugSaveArea; 437 438#define GOTO_TARGET_END } 439 440/* 441 * Redefine what used to be local variable accesses into MterpGlue struct 442 * references. (These are undefined down in "footer.c".) 443 */ 444#define retval glue->retval 445#define pc glue->pc 446#define fp glue->fp 447#define curMethod glue->method 448#define methodClassDex glue->methodClassDex 449#define self glue->self 450#define debugTrackedRefStart glue->debugTrackedRefStart 451 452/* ugh */ 453#define STUB_HACK(x) x 454 455 456/* 457 * Opcode handler framing macros. Here, each opcode is a separate function 458 * that takes a "glue" argument and returns void. We can't declare 459 * these "static" because they may be called from an assembly stub. 460 */ 461#define HANDLE_OPCODE(_op) \ 462 void dvmMterp_##_op(MterpGlue* glue) { \ 463 u2 ref, vsrc1, vsrc2, vdst; \ 464 u2 inst = FETCH(0); 465 466#define OP_END } 467 468/* 469 * Like the "portable" FINISH, but don't reload "inst", and return to caller 470 * when done. 471 */ 472#define FINISH(_offset) { \ 473 ADJUST_PC(_offset); \ 474 CHECK_DEBUG_AND_PROF(); \ 475 CHECK_TRACKED_REFS(); \ 476 return; \ 477 } 478 479 480/* 481 * The "goto label" statements turn into function calls followed by 482 * return statements. Some of the functions take arguments, which in the 483 * portable interpreter are handled by assigning values to globals. 484 */ 485 486#define GOTO_exceptionThrown() \ 487 do { \ 488 dvmMterp_exceptionThrown(glue); \ 489 return; \ 490 } while(false) 491 492#define GOTO_returnFromMethod() \ 493 do { \ 494 dvmMterp_returnFromMethod(glue); \ 495 return; \ 496 } while(false) 497 498#define GOTO_invoke(_target, _methodCallRange) \ 499 do { \ 500 dvmMterp_##_target(glue, _methodCallRange); \ 501 return; \ 502 } while(false) 503 504#define GOTO_invokeMethod(_methodCallRange, _methodToCall, _vsrc1, _vdst) \ 505 do { \ 506 dvmMterp_invokeMethod(glue, _methodCallRange, _methodToCall, \ 507 _vsrc1, _vdst); \ 508 return; \ 509 } while(false) 510 511/* 512 * As a special case, "goto bail" turns into a longjmp. Use "bail_switch" 513 * if we need to switch to the other interpreter upon our return. 514 */ 515#define GOTO_bail() \ 516 dvmMterpStdBail(glue, false); 517#define GOTO_bail_switch() \ 518 dvmMterpStdBail(glue, true); 519 520/* 521 * Periodically check for thread suspension. 522 * 523 * While we're at it, see if a debugger has attached or the profiler has 524 * started. If so, switch to a different "goto" table. 525 */ 526#define PERIODIC_CHECKS(_entryPoint, _pcadj) { \ 527 if (dvmCheckSuspendQuick(self)) { \ 528 EXPORT_PC(); /* need for precise GC */ \ 529 dvmCheckSuspendPending(self); \ 530 } \ 531 if (NEED_INTERP_SWITCH(INTERP_TYPE)) { \ 532 ADJUST_PC(_pcadj); \ 533 glue->entryPoint = _entryPoint; \ 534 LOGVV("threadid=%d: switch to STD ep=%d adj=%d\n", \ 535 self->threadId, (_entryPoint), (_pcadj)); \ 536 GOTO_bail_switch(); \ 537 } \ 538 } 539 540/* File: c/opcommon.c */ 541/* forward declarations of goto targets */ 542GOTO_TARGET_DECL(filledNewArray, bool methodCallRange); 543GOTO_TARGET_DECL(invokeVirtual, bool methodCallRange); 544GOTO_TARGET_DECL(invokeSuper, bool methodCallRange); 545GOTO_TARGET_DECL(invokeInterface, bool methodCallRange); 546GOTO_TARGET_DECL(invokeDirect, bool methodCallRange); 547GOTO_TARGET_DECL(invokeStatic, bool methodCallRange); 548GOTO_TARGET_DECL(invokeVirtualQuick, bool methodCallRange); 549GOTO_TARGET_DECL(invokeSuperQuick, bool methodCallRange); 550GOTO_TARGET_DECL(invokeMethod, bool methodCallRange, const Method* methodToCall, 551 u2 count, u2 regs); 552GOTO_TARGET_DECL(returnFromMethod); 553GOTO_TARGET_DECL(exceptionThrown); 554 555/* 556 * =========================================================================== 557 * 558 * What follows are opcode definitions shared between multiple opcodes with 559 * minor substitutions handled by the C pre-processor. These should probably 560 * use the mterp substitution mechanism instead, with the code here moved 561 * into common fragment files (like the asm "binop.S"), although it's hard 562 * to give up the C preprocessor in favor of the much simpler text subst. 563 * 564 * =========================================================================== 565 */ 566 567#define HANDLE_NUMCONV(_opcode, _opname, _fromtype, _totype) \ 568 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 569 vdst = INST_A(inst); \ 570 vsrc1 = INST_B(inst); \ 571 ILOGV("|%s v%d,v%d", (_opname), vdst, vsrc1); \ 572 SET_REGISTER##_totype(vdst, \ 573 GET_REGISTER##_fromtype(vsrc1)); \ 574 FINISH(1); 575 576#define HANDLE_FLOAT_TO_INT(_opcode, _opname, _fromvtype, _fromrtype, \ 577 _tovtype, _tortype) \ 578 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 579 { \ 580 /* spec defines specific handling for +/- inf and NaN values */ \ 581 _fromvtype val; \ 582 _tovtype intMin, intMax, result; \ 583 vdst = INST_A(inst); \ 584 vsrc1 = INST_B(inst); \ 585 ILOGV("|%s v%d,v%d", (_opname), vdst, vsrc1); \ 586 val = GET_REGISTER##_fromrtype(vsrc1); \ 587 intMin = (_tovtype) 1 << (sizeof(_tovtype) * 8 -1); \ 588 intMax = ~intMin; \ 589 result = (_tovtype) val; \ 590 if (val >= intMax) /* +inf */ \ 591 result = intMax; \ 592 else if (val <= intMin) /* -inf */ \ 593 result = intMin; \ 594 else if (val != val) /* NaN */ \ 595 result = 0; \ 596 else \ 597 result = (_tovtype) val; \ 598 SET_REGISTER##_tortype(vdst, result); \ 599 } \ 600 FINISH(1); 601 602#define HANDLE_INT_TO_SMALL(_opcode, _opname, _type) \ 603 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 604 vdst = INST_A(inst); \ 605 vsrc1 = INST_B(inst); \ 606 ILOGV("|int-to-%s v%d,v%d", (_opname), vdst, vsrc1); \ 607 SET_REGISTER(vdst, (_type) GET_REGISTER(vsrc1)); \ 608 FINISH(1); 609 610/* NOTE: the comparison result is always a signed 4-byte integer */ 611#define HANDLE_OP_CMPX(_opcode, _opname, _varType, _type, _nanVal) \ 612 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 613 { \ 614 int result; \ 615 u2 regs; \ 616 _varType val1, val2; \ 617 vdst = INST_AA(inst); \ 618 regs = FETCH(1); \ 619 vsrc1 = regs & 0xff; \ 620 vsrc2 = regs >> 8; \ 621 ILOGV("|cmp%s v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 622 val1 = GET_REGISTER##_type(vsrc1); \ 623 val2 = GET_REGISTER##_type(vsrc2); \ 624 if (val1 == val2) \ 625 result = 0; \ 626 else if (val1 < val2) \ 627 result = -1; \ 628 else if (val1 > val2) \ 629 result = 1; \ 630 else \ 631 result = (_nanVal); \ 632 ILOGV("+ result=%d\n", result); \ 633 SET_REGISTER(vdst, result); \ 634 } \ 635 FINISH(2); 636 637#define HANDLE_OP_IF_XX(_opcode, _opname, _cmp) \ 638 HANDLE_OPCODE(_opcode /*vA, vB, +CCCC*/) \ 639 vsrc1 = INST_A(inst); \ 640 vsrc2 = INST_B(inst); \ 641 if ((s4) GET_REGISTER(vsrc1) _cmp (s4) GET_REGISTER(vsrc2)) { \ 642 int branchOffset = (s2)FETCH(1); /* sign-extended */ \ 643 ILOGV("|if-%s v%d,v%d,+0x%04x", (_opname), vsrc1, vsrc2, \ 644 branchOffset); \ 645 ILOGV("> branch taken"); \ 646 if (branchOffset < 0) \ 647 PERIODIC_CHECKS(kInterpEntryInstr, branchOffset); \ 648 FINISH(branchOffset); \ 649 } else { \ 650 ILOGV("|if-%s v%d,v%d,-", (_opname), vsrc1, vsrc2); \ 651 FINISH(2); \ 652 } 653 654#define HANDLE_OP_IF_XXZ(_opcode, _opname, _cmp) \ 655 HANDLE_OPCODE(_opcode /*vAA, +BBBB*/) \ 656 vsrc1 = INST_AA(inst); \ 657 if ((s4) GET_REGISTER(vsrc1) _cmp 0) { \ 658 int branchOffset = (s2)FETCH(1); /* sign-extended */ \ 659 ILOGV("|if-%s v%d,+0x%04x", (_opname), vsrc1, branchOffset); \ 660 ILOGV("> branch taken"); \ 661 if (branchOffset < 0) \ 662 PERIODIC_CHECKS(kInterpEntryInstr, branchOffset); \ 663 FINISH(branchOffset); \ 664 } else { \ 665 ILOGV("|if-%s v%d,-", (_opname), vsrc1); \ 666 FINISH(2); \ 667 } 668 669#define HANDLE_UNOP(_opcode, _opname, _pfx, _sfx, _type) \ 670 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 671 vdst = INST_A(inst); \ 672 vsrc1 = INST_B(inst); \ 673 ILOGV("|%s v%d,v%d", (_opname), vdst, vsrc1); \ 674 SET_REGISTER##_type(vdst, _pfx GET_REGISTER##_type(vsrc1) _sfx); \ 675 FINISH(1); 676 677#define HANDLE_OP_X_INT(_opcode, _opname, _op, _chkdiv) \ 678 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 679 { \ 680 u2 srcRegs; \ 681 vdst = INST_AA(inst); \ 682 srcRegs = FETCH(1); \ 683 vsrc1 = srcRegs & 0xff; \ 684 vsrc2 = srcRegs >> 8; \ 685 ILOGV("|%s-int v%d,v%d", (_opname), vdst, vsrc1); \ 686 if (_chkdiv != 0) { \ 687 s4 firstVal, secondVal, result; \ 688 firstVal = GET_REGISTER(vsrc1); \ 689 secondVal = GET_REGISTER(vsrc2); \ 690 if (secondVal == 0) { \ 691 EXPORT_PC(); \ 692 dvmThrowException("Ljava/lang/ArithmeticException;", \ 693 "divide by zero"); \ 694 GOTO_exceptionThrown(); \ 695 } \ 696 if ((u4)firstVal == 0x80000000 && secondVal == -1) { \ 697 if (_chkdiv == 1) \ 698 result = firstVal; /* division */ \ 699 else \ 700 result = 0; /* remainder */ \ 701 } else { \ 702 result = firstVal _op secondVal; \ 703 } \ 704 SET_REGISTER(vdst, result); \ 705 } else { \ 706 /* non-div/rem case */ \ 707 SET_REGISTER(vdst, \ 708 (s4) GET_REGISTER(vsrc1) _op (s4) GET_REGISTER(vsrc2)); \ 709 } \ 710 } \ 711 FINISH(2); 712 713#define HANDLE_OP_SHX_INT(_opcode, _opname, _cast, _op) \ 714 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 715 { \ 716 u2 srcRegs; \ 717 vdst = INST_AA(inst); \ 718 srcRegs = FETCH(1); \ 719 vsrc1 = srcRegs & 0xff; \ 720 vsrc2 = srcRegs >> 8; \ 721 ILOGV("|%s-int v%d,v%d", (_opname), vdst, vsrc1); \ 722 SET_REGISTER(vdst, \ 723 _cast GET_REGISTER(vsrc1) _op (GET_REGISTER(vsrc2) & 0x1f)); \ 724 } \ 725 FINISH(2); 726 727#define HANDLE_OP_X_INT_LIT16(_opcode, _opname, _op, _chkdiv) \ 728 HANDLE_OPCODE(_opcode /*vA, vB, #+CCCC*/) \ 729 vdst = INST_A(inst); \ 730 vsrc1 = INST_B(inst); \ 731 vsrc2 = FETCH(1); \ 732 ILOGV("|%s-int/lit16 v%d,v%d,#+0x%04x", \ 733 (_opname), vdst, vsrc1, vsrc2); \ 734 if (_chkdiv != 0) { \ 735 s4 firstVal, result; \ 736 firstVal = GET_REGISTER(vsrc1); \ 737 if ((s2) vsrc2 == 0) { \ 738 EXPORT_PC(); \ 739 dvmThrowException("Ljava/lang/ArithmeticException;", \ 740 "divide by zero"); \ 741 GOTO_exceptionThrown(); \ 742 } \ 743 if ((u4)firstVal == 0x80000000 && ((s2) vsrc2) == -1) { \ 744 /* won't generate /lit16 instr for this; check anyway */ \ 745 if (_chkdiv == 1) \ 746 result = firstVal; /* division */ \ 747 else \ 748 result = 0; /* remainder */ \ 749 } else { \ 750 result = firstVal _op (s2) vsrc2; \ 751 } \ 752 SET_REGISTER(vdst, result); \ 753 } else { \ 754 /* non-div/rem case */ \ 755 SET_REGISTER(vdst, GET_REGISTER(vsrc1) _op (s2) vsrc2); \ 756 } \ 757 FINISH(2); 758 759#define HANDLE_OP_X_INT_LIT8(_opcode, _opname, _op, _chkdiv) \ 760 HANDLE_OPCODE(_opcode /*vAA, vBB, #+CC*/) \ 761 { \ 762 u2 litInfo; \ 763 vdst = INST_AA(inst); \ 764 litInfo = FETCH(1); \ 765 vsrc1 = litInfo & 0xff; \ 766 vsrc2 = litInfo >> 8; /* constant */ \ 767 ILOGV("|%s-int/lit8 v%d,v%d,#+0x%02x", \ 768 (_opname), vdst, vsrc1, vsrc2); \ 769 if (_chkdiv != 0) { \ 770 s4 firstVal, result; \ 771 firstVal = GET_REGISTER(vsrc1); \ 772 if ((s1) vsrc2 == 0) { \ 773 EXPORT_PC(); \ 774 dvmThrowException("Ljava/lang/ArithmeticException;", \ 775 "divide by zero"); \ 776 GOTO_exceptionThrown(); \ 777 } \ 778 if ((u4)firstVal == 0x80000000 && ((s1) vsrc2) == -1) { \ 779 if (_chkdiv == 1) \ 780 result = firstVal; /* division */ \ 781 else \ 782 result = 0; /* remainder */ \ 783 } else { \ 784 result = firstVal _op ((s1) vsrc2); \ 785 } \ 786 SET_REGISTER(vdst, result); \ 787 } else { \ 788 SET_REGISTER(vdst, \ 789 (s4) GET_REGISTER(vsrc1) _op (s1) vsrc2); \ 790 } \ 791 } \ 792 FINISH(2); 793 794#define HANDLE_OP_SHX_INT_LIT8(_opcode, _opname, _cast, _op) \ 795 HANDLE_OPCODE(_opcode /*vAA, vBB, #+CC*/) \ 796 { \ 797 u2 litInfo; \ 798 vdst = INST_AA(inst); \ 799 litInfo = FETCH(1); \ 800 vsrc1 = litInfo & 0xff; \ 801 vsrc2 = litInfo >> 8; /* constant */ \ 802 ILOGV("|%s-int/lit8 v%d,v%d,#+0x%02x", \ 803 (_opname), vdst, vsrc1, vsrc2); \ 804 SET_REGISTER(vdst, \ 805 _cast GET_REGISTER(vsrc1) _op (vsrc2 & 0x1f)); \ 806 } \ 807 FINISH(2); 808 809#define HANDLE_OP_X_INT_2ADDR(_opcode, _opname, _op, _chkdiv) \ 810 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 811 vdst = INST_A(inst); \ 812 vsrc1 = INST_B(inst); \ 813 ILOGV("|%s-int-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 814 if (_chkdiv != 0) { \ 815 s4 firstVal, secondVal, result; \ 816 firstVal = GET_REGISTER(vdst); \ 817 secondVal = GET_REGISTER(vsrc1); \ 818 if (secondVal == 0) { \ 819 EXPORT_PC(); \ 820 dvmThrowException("Ljava/lang/ArithmeticException;", \ 821 "divide by zero"); \ 822 GOTO_exceptionThrown(); \ 823 } \ 824 if ((u4)firstVal == 0x80000000 && secondVal == -1) { \ 825 if (_chkdiv == 1) \ 826 result = firstVal; /* division */ \ 827 else \ 828 result = 0; /* remainder */ \ 829 } else { \ 830 result = firstVal _op secondVal; \ 831 } \ 832 SET_REGISTER(vdst, result); \ 833 } else { \ 834 SET_REGISTER(vdst, \ 835 (s4) GET_REGISTER(vdst) _op (s4) GET_REGISTER(vsrc1)); \ 836 } \ 837 FINISH(1); 838 839#define HANDLE_OP_SHX_INT_2ADDR(_opcode, _opname, _cast, _op) \ 840 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 841 vdst = INST_A(inst); \ 842 vsrc1 = INST_B(inst); \ 843 ILOGV("|%s-int-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 844 SET_REGISTER(vdst, \ 845 _cast GET_REGISTER(vdst) _op (GET_REGISTER(vsrc1) & 0x1f)); \ 846 FINISH(1); 847 848#define HANDLE_OP_X_LONG(_opcode, _opname, _op, _chkdiv) \ 849 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 850 { \ 851 u2 srcRegs; \ 852 vdst = INST_AA(inst); \ 853 srcRegs = FETCH(1); \ 854 vsrc1 = srcRegs & 0xff; \ 855 vsrc2 = srcRegs >> 8; \ 856 ILOGV("|%s-long v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 857 if (_chkdiv != 0) { \ 858 s8 firstVal, secondVal, result; \ 859 firstVal = GET_REGISTER_WIDE(vsrc1); \ 860 secondVal = GET_REGISTER_WIDE(vsrc2); \ 861 if (secondVal == 0LL) { \ 862 EXPORT_PC(); \ 863 dvmThrowException("Ljava/lang/ArithmeticException;", \ 864 "divide by zero"); \ 865 GOTO_exceptionThrown(); \ 866 } \ 867 if ((u8)firstVal == 0x8000000000000000ULL && \ 868 secondVal == -1LL) \ 869 { \ 870 if (_chkdiv == 1) \ 871 result = firstVal; /* division */ \ 872 else \ 873 result = 0; /* remainder */ \ 874 } else { \ 875 result = firstVal _op secondVal; \ 876 } \ 877 SET_REGISTER_WIDE(vdst, result); \ 878 } else { \ 879 SET_REGISTER_WIDE(vdst, \ 880 (s8) GET_REGISTER_WIDE(vsrc1) _op (s8) GET_REGISTER_WIDE(vsrc2)); \ 881 } \ 882 } \ 883 FINISH(2); 884 885#define HANDLE_OP_SHX_LONG(_opcode, _opname, _cast, _op) \ 886 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 887 { \ 888 u2 srcRegs; \ 889 vdst = INST_AA(inst); \ 890 srcRegs = FETCH(1); \ 891 vsrc1 = srcRegs & 0xff; \ 892 vsrc2 = srcRegs >> 8; \ 893 ILOGV("|%s-long v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 894 SET_REGISTER_WIDE(vdst, \ 895 _cast GET_REGISTER_WIDE(vsrc1) _op (GET_REGISTER(vsrc2) & 0x3f)); \ 896 } \ 897 FINISH(2); 898 899#define HANDLE_OP_X_LONG_2ADDR(_opcode, _opname, _op, _chkdiv) \ 900 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 901 vdst = INST_A(inst); \ 902 vsrc1 = INST_B(inst); \ 903 ILOGV("|%s-long-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 904 if (_chkdiv != 0) { \ 905 s8 firstVal, secondVal, result; \ 906 firstVal = GET_REGISTER_WIDE(vdst); \ 907 secondVal = GET_REGISTER_WIDE(vsrc1); \ 908 if (secondVal == 0LL) { \ 909 EXPORT_PC(); \ 910 dvmThrowException("Ljava/lang/ArithmeticException;", \ 911 "divide by zero"); \ 912 GOTO_exceptionThrown(); \ 913 } \ 914 if ((u8)firstVal == 0x8000000000000000ULL && \ 915 secondVal == -1LL) \ 916 { \ 917 if (_chkdiv == 1) \ 918 result = firstVal; /* division */ \ 919 else \ 920 result = 0; /* remainder */ \ 921 } else { \ 922 result = firstVal _op secondVal; \ 923 } \ 924 SET_REGISTER_WIDE(vdst, result); \ 925 } else { \ 926 SET_REGISTER_WIDE(vdst, \ 927 (s8) GET_REGISTER_WIDE(vdst) _op (s8)GET_REGISTER_WIDE(vsrc1));\ 928 } \ 929 FINISH(1); 930 931#define HANDLE_OP_SHX_LONG_2ADDR(_opcode, _opname, _cast, _op) \ 932 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 933 vdst = INST_A(inst); \ 934 vsrc1 = INST_B(inst); \ 935 ILOGV("|%s-long-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 936 SET_REGISTER_WIDE(vdst, \ 937 _cast GET_REGISTER_WIDE(vdst) _op (GET_REGISTER(vsrc1) & 0x3f)); \ 938 FINISH(1); 939 940#define HANDLE_OP_X_FLOAT(_opcode, _opname, _op) \ 941 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 942 { \ 943 u2 srcRegs; \ 944 vdst = INST_AA(inst); \ 945 srcRegs = FETCH(1); \ 946 vsrc1 = srcRegs & 0xff; \ 947 vsrc2 = srcRegs >> 8; \ 948 ILOGV("|%s-float v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 949 SET_REGISTER_FLOAT(vdst, \ 950 GET_REGISTER_FLOAT(vsrc1) _op GET_REGISTER_FLOAT(vsrc2)); \ 951 } \ 952 FINISH(2); 953 954#define HANDLE_OP_X_DOUBLE(_opcode, _opname, _op) \ 955 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 956 { \ 957 u2 srcRegs; \ 958 vdst = INST_AA(inst); \ 959 srcRegs = FETCH(1); \ 960 vsrc1 = srcRegs & 0xff; \ 961 vsrc2 = srcRegs >> 8; \ 962 ILOGV("|%s-double v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 963 SET_REGISTER_DOUBLE(vdst, \ 964 GET_REGISTER_DOUBLE(vsrc1) _op GET_REGISTER_DOUBLE(vsrc2)); \ 965 } \ 966 FINISH(2); 967 968#define HANDLE_OP_X_FLOAT_2ADDR(_opcode, _opname, _op) \ 969 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 970 vdst = INST_A(inst); \ 971 vsrc1 = INST_B(inst); \ 972 ILOGV("|%s-float-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 973 SET_REGISTER_FLOAT(vdst, \ 974 GET_REGISTER_FLOAT(vdst) _op GET_REGISTER_FLOAT(vsrc1)); \ 975 FINISH(1); 976 977#define HANDLE_OP_X_DOUBLE_2ADDR(_opcode, _opname, _op) \ 978 HANDLE_OPCODE(_opcode /*vA, vB*/) \ 979 vdst = INST_A(inst); \ 980 vsrc1 = INST_B(inst); \ 981 ILOGV("|%s-double-2addr v%d,v%d", (_opname), vdst, vsrc1); \ 982 SET_REGISTER_DOUBLE(vdst, \ 983 GET_REGISTER_DOUBLE(vdst) _op GET_REGISTER_DOUBLE(vsrc1)); \ 984 FINISH(1); 985 986#define HANDLE_OP_AGET(_opcode, _opname, _type, _regsize) \ 987 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 988 { \ 989 ArrayObject* arrayObj; \ 990 u2 arrayInfo; \ 991 EXPORT_PC(); \ 992 vdst = INST_AA(inst); \ 993 arrayInfo = FETCH(1); \ 994 vsrc1 = arrayInfo & 0xff; /* array ptr */ \ 995 vsrc2 = arrayInfo >> 8; /* index */ \ 996 ILOGV("|aget%s v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 997 arrayObj = (ArrayObject*) GET_REGISTER(vsrc1); \ 998 if (!checkForNull((Object*) arrayObj)) \ 999 GOTO_exceptionThrown(); \ 1000 if (GET_REGISTER(vsrc2) >= arrayObj->length) { \ 1001 LOGV("Invalid array access: %p %d (len=%d)\n", \ 1002 arrayObj, vsrc2, arrayObj->length); \ 1003 dvmThrowException("Ljava/lang/ArrayIndexOutOfBoundsException;", \ 1004 NULL); \ 1005 GOTO_exceptionThrown(); \ 1006 } \ 1007 SET_REGISTER##_regsize(vdst, \ 1008 ((_type*) arrayObj->contents)[GET_REGISTER(vsrc2)]); \ 1009 ILOGV("+ AGET[%d]=0x%x", GET_REGISTER(vsrc2), GET_REGISTER(vdst)); \ 1010 } \ 1011 FINISH(2); 1012 1013#define HANDLE_OP_APUT(_opcode, _opname, _type, _regsize) \ 1014 HANDLE_OPCODE(_opcode /*vAA, vBB, vCC*/) \ 1015 { \ 1016 ArrayObject* arrayObj; \ 1017 u2 arrayInfo; \ 1018 EXPORT_PC(); \ 1019 vdst = INST_AA(inst); /* AA: source value */ \ 1020 arrayInfo = FETCH(1); \ 1021 vsrc1 = arrayInfo & 0xff; /* BB: array ptr */ \ 1022 vsrc2 = arrayInfo >> 8; /* CC: index */ \ 1023 ILOGV("|aput%s v%d,v%d,v%d", (_opname), vdst, vsrc1, vsrc2); \ 1024 arrayObj = (ArrayObject*) GET_REGISTER(vsrc1); \ 1025 if (!checkForNull((Object*) arrayObj)) \ 1026 GOTO_exceptionThrown(); \ 1027 if (GET_REGISTER(vsrc2) >= arrayObj->length) { \ 1028 dvmThrowException("Ljava/lang/ArrayIndexOutOfBoundsException;", \ 1029 NULL); \ 1030 GOTO_exceptionThrown(); \ 1031 } \ 1032 ILOGV("+ APUT[%d]=0x%08x", GET_REGISTER(vsrc2), GET_REGISTER(vdst));\ 1033 ((_type*) arrayObj->contents)[GET_REGISTER(vsrc2)] = \ 1034 GET_REGISTER##_regsize(vdst); \ 1035 } \ 1036 FINISH(2); 1037 1038/* 1039 * It's possible to get a bad value out of a field with sub-32-bit stores 1040 * because the -quick versions always operate on 32 bits. Consider: 1041 * short foo = -1 (sets a 32-bit register to 0xffffffff) 1042 * iput-quick foo (writes all 32 bits to the field) 1043 * short bar = 1 (sets a 32-bit register to 0x00000001) 1044 * iput-short (writes the low 16 bits to the field) 1045 * iget-quick foo (reads all 32 bits from the field, yielding 0xffff0001) 1046 * This can only happen when optimized and non-optimized code has interleaved 1047 * access to the same field. This is unlikely but possible. 1048 * 1049 * The easiest way to fix this is to always read/write 32 bits at a time. On 1050 * a device with a 16-bit data bus this is sub-optimal. (The alternative 1051 * approach is to have sub-int versions of iget-quick, but now we're wasting 1052 * Dalvik instruction space and making it less likely that handler code will 1053 * already be in the CPU i-cache.) 1054 */ 1055#define HANDLE_IGET_X(_opcode, _opname, _ftype, _regsize) \ 1056 HANDLE_OPCODE(_opcode /*vA, vB, field@CCCC*/) \ 1057 { \ 1058 InstField* ifield; \ 1059 Object* obj; \ 1060 EXPORT_PC(); \ 1061 vdst = INST_A(inst); \ 1062 vsrc1 = INST_B(inst); /* object ptr */ \ 1063 ref = FETCH(1); /* field ref */ \ 1064 ILOGV("|iget%s v%d,v%d,field@0x%04x", (_opname), vdst, vsrc1, ref); \ 1065 obj = (Object*) GET_REGISTER(vsrc1); \ 1066 if (!checkForNull(obj)) \ 1067 GOTO_exceptionThrown(); \ 1068 ifield = (InstField*) dvmDexGetResolvedField(methodClassDex, ref); \ 1069 if (ifield == NULL) { \ 1070 ifield = dvmResolveInstField(curMethod->clazz, ref); \ 1071 if (ifield == NULL) \ 1072 GOTO_exceptionThrown(); \ 1073 } \ 1074 SET_REGISTER##_regsize(vdst, \ 1075 dvmGetField##_ftype(obj, ifield->byteOffset)); \ 1076 ILOGV("+ IGET '%s'=0x%08llx", ifield->field.name, \ 1077 (u8) GET_REGISTER##_regsize(vdst)); \ 1078 UPDATE_FIELD_GET(&ifield->field); \ 1079 } \ 1080 FINISH(2); 1081 1082#define HANDLE_IGET_X_QUICK(_opcode, _opname, _ftype, _regsize) \ 1083 HANDLE_OPCODE(_opcode /*vA, vB, field@CCCC*/) \ 1084 { \ 1085 Object* obj; \ 1086 vdst = INST_A(inst); \ 1087 vsrc1 = INST_B(inst); /* object ptr */ \ 1088 ref = FETCH(1); /* field offset */ \ 1089 ILOGV("|iget%s-quick v%d,v%d,field@+%u", \ 1090 (_opname), vdst, vsrc1, ref); \ 1091 obj = (Object*) GET_REGISTER(vsrc1); \ 1092 if (!checkForNullExportPC(obj, fp, pc)) \ 1093 GOTO_exceptionThrown(); \ 1094 SET_REGISTER##_regsize(vdst, dvmGetField##_ftype(obj, ref)); \ 1095 ILOGV("+ IGETQ %d=0x%08llx", ref, \ 1096 (u8) GET_REGISTER##_regsize(vdst)); \ 1097 } \ 1098 FINISH(2); 1099 1100#define HANDLE_IPUT_X(_opcode, _opname, _ftype, _regsize) \ 1101 HANDLE_OPCODE(_opcode /*vA, vB, field@CCCC*/) \ 1102 { \ 1103 InstField* ifield; \ 1104 Object* obj; \ 1105 EXPORT_PC(); \ 1106 vdst = INST_A(inst); \ 1107 vsrc1 = INST_B(inst); /* object ptr */ \ 1108 ref = FETCH(1); /* field ref */ \ 1109 ILOGV("|iput%s v%d,v%d,field@0x%04x", (_opname), vdst, vsrc1, ref); \ 1110 obj = (Object*) GET_REGISTER(vsrc1); \ 1111 if (!checkForNull(obj)) \ 1112 GOTO_exceptionThrown(); \ 1113 ifield = (InstField*) dvmDexGetResolvedField(methodClassDex, ref); \ 1114 if (ifield == NULL) { \ 1115 ifield = dvmResolveInstField(curMethod->clazz, ref); \ 1116 if (ifield == NULL) \ 1117 GOTO_exceptionThrown(); \ 1118 } \ 1119 dvmSetField##_ftype(obj, ifield->byteOffset, \ 1120 GET_REGISTER##_regsize(vdst)); \ 1121 ILOGV("+ IPUT '%s'=0x%08llx", ifield->field.name, \ 1122 (u8) GET_REGISTER##_regsize(vdst)); \ 1123 UPDATE_FIELD_PUT(&ifield->field); \ 1124 } \ 1125 FINISH(2); 1126 1127#define HANDLE_IPUT_X_QUICK(_opcode, _opname, _ftype, _regsize) \ 1128 HANDLE_OPCODE(_opcode /*vA, vB, field@CCCC*/) \ 1129 { \ 1130 Object* obj; \ 1131 vdst = INST_A(inst); \ 1132 vsrc1 = INST_B(inst); /* object ptr */ \ 1133 ref = FETCH(1); /* field offset */ \ 1134 ILOGV("|iput%s-quick v%d,v%d,field@0x%04x", \ 1135 (_opname), vdst, vsrc1, ref); \ 1136 obj = (Object*) GET_REGISTER(vsrc1); \ 1137 if (!checkForNullExportPC(obj, fp, pc)) \ 1138 GOTO_exceptionThrown(); \ 1139 dvmSetField##_ftype(obj, ref, GET_REGISTER##_regsize(vdst)); \ 1140 ILOGV("+ IPUTQ %d=0x%08llx", ref, \ 1141 (u8) GET_REGISTER##_regsize(vdst)); \ 1142 } \ 1143 FINISH(2); 1144 1145/* 1146 * The JIT needs dvmDexGetResolvedField() to return non-null. 1147 * Since we use the portable interpreter to build the trace, the extra 1148 * checks in HANDLE_SGET_X and HANDLE_SPUT_X are not needed for mterp. 1149 */ 1150#define HANDLE_SGET_X(_opcode, _opname, _ftype, _regsize) \ 1151 HANDLE_OPCODE(_opcode /*vAA, field@BBBB*/) \ 1152 { \ 1153 StaticField* sfield; \ 1154 vdst = INST_AA(inst); \ 1155 ref = FETCH(1); /* field ref */ \ 1156 ILOGV("|sget%s v%d,sfield@0x%04x", (_opname), vdst, ref); \ 1157 sfield = (StaticField*)dvmDexGetResolvedField(methodClassDex, ref); \ 1158 if (sfield == NULL) { \ 1159 EXPORT_PC(); \ 1160 sfield = dvmResolveStaticField(curMethod->clazz, ref); \ 1161 if (sfield == NULL) \ 1162 GOTO_exceptionThrown(); \ 1163 if (dvmDexGetResolvedField(methodClassDex, ref) == NULL) { \ 1164 ABORT_JIT_TSELECT(); \ 1165 } \ 1166 } \ 1167 SET_REGISTER##_regsize(vdst, dvmGetStaticField##_ftype(sfield)); \ 1168 ILOGV("+ SGET '%s'=0x%08llx", \ 1169 sfield->field.name, (u8)GET_REGISTER##_regsize(vdst)); \ 1170 UPDATE_FIELD_GET(&sfield->field); \ 1171 } \ 1172 FINISH(2); 1173 1174#define HANDLE_SPUT_X(_opcode, _opname, _ftype, _regsize) \ 1175 HANDLE_OPCODE(_opcode /*vAA, field@BBBB*/) \ 1176 { \ 1177 StaticField* sfield; \ 1178 vdst = INST_AA(inst); \ 1179 ref = FETCH(1); /* field ref */ \ 1180 ILOGV("|sput%s v%d,sfield@0x%04x", (_opname), vdst, ref); \ 1181 sfield = (StaticField*)dvmDexGetResolvedField(methodClassDex, ref); \ 1182 if (sfield == NULL) { \ 1183 EXPORT_PC(); \ 1184 sfield = dvmResolveStaticField(curMethod->clazz, ref); \ 1185 if (sfield == NULL) \ 1186 GOTO_exceptionThrown(); \ 1187 if (dvmDexGetResolvedField(methodClassDex, ref) == NULL) { \ 1188 ABORT_JIT_TSELECT(); \ 1189 } \ 1190 } \ 1191 dvmSetStaticField##_ftype(sfield, GET_REGISTER##_regsize(vdst)); \ 1192 ILOGV("+ SPUT '%s'=0x%08llx", \ 1193 sfield->field.name, (u8)GET_REGISTER##_regsize(vdst)); \ 1194 UPDATE_FIELD_PUT(&sfield->field); \ 1195 } \ 1196 FINISH(2); 1197 1198/* File: c/OP_IGET_VOLATILE.c */ 1199HANDLE_IGET_X(OP_IGET_VOLATILE, "-volatile", IntVolatile, ) 1200OP_END 1201 1202/* File: c/OP_IPUT_VOLATILE.c */ 1203HANDLE_IPUT_X(OP_IPUT_VOLATILE, "-volatile", IntVolatile, ) 1204OP_END 1205 1206/* File: c/OP_SGET_VOLATILE.c */ 1207HANDLE_SGET_X(OP_SGET_VOLATILE, "-volatile", IntVolatile, ) 1208OP_END 1209 1210/* File: c/OP_SPUT_VOLATILE.c */ 1211HANDLE_SPUT_X(OP_SPUT_VOLATILE, "-volatile", IntVolatile, ) 1212OP_END 1213 1214/* File: c/OP_IGET_OBJECT_VOLATILE.c */ 1215HANDLE_IGET_X(OP_IGET_OBJECT_VOLATILE, "-object-volatile", ObjectVolatile, _AS_OBJECT) 1216OP_END 1217 1218/* File: c/OP_IGET_WIDE_VOLATILE.c */ 1219HANDLE_IGET_X(OP_IGET_WIDE_VOLATILE, "-wide-volatile", LongVolatile, _WIDE) 1220OP_END 1221 1222/* File: c/OP_IPUT_WIDE_VOLATILE.c */ 1223HANDLE_IPUT_X(OP_IPUT_WIDE_VOLATILE, "-wide-volatile", LongVolatile, _WIDE) 1224OP_END 1225 1226/* File: c/OP_SGET_WIDE_VOLATILE.c */ 1227HANDLE_SGET_X(OP_SGET_WIDE_VOLATILE, "-wide-volatile", LongVolatile, _WIDE) 1228OP_END 1229 1230/* File: c/OP_SPUT_WIDE_VOLATILE.c */ 1231HANDLE_SPUT_X(OP_SPUT_WIDE_VOLATILE, "-wide-volatile", LongVolatile, _WIDE) 1232OP_END 1233 1234/* File: c/OP_BREAKPOINT.c */ 1235HANDLE_OPCODE(OP_BREAKPOINT) 1236#if (INTERP_TYPE == INTERP_DBG) 1237 { 1238 /* 1239 * Restart this instruction with the original opcode. We do 1240 * this by simply jumping to the handler. 1241 * 1242 * It's probably not necessary to update "inst", but we do it 1243 * for the sake of anything that needs to do disambiguation in a 1244 * common handler with INST_INST. 1245 * 1246 * The breakpoint itself is handled over in updateDebugger(), 1247 * because we need to detect other events (method entry, single 1248 * step) and report them in the same event packet, and we're not 1249 * yet handling those through breakpoint instructions. By the 1250 * time we get here, the breakpoint has already been handled and 1251 * the thread resumed. 1252 */ 1253 u1 originalOpCode = dvmGetOriginalOpCode(pc); 1254 LOGV("+++ break 0x%02x (0x%04x -> 0x%04x)\n", originalOpCode, inst, 1255 INST_REPLACE_OP(inst, originalOpCode)); 1256 inst = INST_REPLACE_OP(inst, originalOpCode); 1257 FINISH_BKPT(originalOpCode); 1258 } 1259#else 1260 LOGE("Breakpoint hit in non-debug interpreter\n"); 1261 dvmAbort(); 1262#endif 1263OP_END 1264 1265/* File: c/OP_EXECUTE_INLINE_RANGE.c */ 1266HANDLE_OPCODE(OP_EXECUTE_INLINE_RANGE /*{vCCCC..v(CCCC+AA-1)}, inline@BBBB*/) 1267 { 1268 u4 arg0, arg1, arg2, arg3; 1269 arg0 = arg1 = arg2 = arg3 = 0; /* placate gcc */ 1270 1271 EXPORT_PC(); 1272 1273 vsrc1 = INST_AA(inst); /* #of args */ 1274 ref = FETCH(1); /* inline call "ref" */ 1275 vdst = FETCH(2); /* range base */ 1276 ILOGV("|execute-inline-range args=%d @%d {regs=v%d-v%d}", 1277 vsrc1, ref, vdst, vdst+vsrc1-1); 1278 1279 assert((vdst >> 16) == 0); // 16-bit type -or- high 16 bits clear 1280 assert(vsrc1 <= 4); 1281 1282 switch (vsrc1) { 1283 case 4: 1284 arg3 = GET_REGISTER(vdst+3); 1285 /* fall through */ 1286 case 3: 1287 arg2 = GET_REGISTER(vdst+2); 1288 /* fall through */ 1289 case 2: 1290 arg1 = GET_REGISTER(vdst+1); 1291 /* fall through */ 1292 case 1: 1293 arg0 = GET_REGISTER(vdst+0); 1294 /* fall through */ 1295 default: // case 0 1296 ; 1297 } 1298 1299#if INTERP_TYPE == INTERP_DBG 1300 if (!dvmPerformInlineOp4Dbg(arg0, arg1, arg2, arg3, &retval, ref)) 1301 GOTO_exceptionThrown(); 1302#else 1303 if (!dvmPerformInlineOp4Std(arg0, arg1, arg2, arg3, &retval, ref)) 1304 GOTO_exceptionThrown(); 1305#endif 1306 } 1307 FINISH(3); 1308OP_END 1309 1310/* File: c/OP_IPUT_OBJECT_VOLATILE.c */ 1311HANDLE_IPUT_X(OP_IPUT_OBJECT_VOLATILE, "-object-volatile", ObjectVolatile, _AS_OBJECT) 1312OP_END 1313 1314/* File: c/OP_SGET_OBJECT_VOLATILE.c */ 1315HANDLE_SGET_X(OP_SGET_OBJECT_VOLATILE, "-object-volatile", ObjectVolatile, _AS_OBJECT) 1316OP_END 1317 1318/* File: c/OP_SPUT_OBJECT_VOLATILE.c */ 1319HANDLE_SPUT_X(OP_SPUT_OBJECT_VOLATILE, "-object-volatile", ObjectVolatile, _AS_OBJECT) 1320OP_END 1321 1322/* File: c/gotoTargets.c */ 1323/* 1324 * C footer. This has some common code shared by the various targets. 1325 */ 1326 1327/* 1328 * Everything from here on is a "goto target". In the basic interpreter 1329 * we jump into these targets and then jump directly to the handler for 1330 * next instruction. Here, these are subroutines that return to the caller. 1331 */ 1332 1333GOTO_TARGET(filledNewArray, bool methodCallRange) 1334 { 1335 ClassObject* arrayClass; 1336 ArrayObject* newArray; 1337 u4* contents; 1338 char typeCh; 1339 int i; 1340 u4 arg5; 1341 1342 EXPORT_PC(); 1343 1344 ref = FETCH(1); /* class ref */ 1345 vdst = FETCH(2); /* first 4 regs -or- range base */ 1346 1347 if (methodCallRange) { 1348 vsrc1 = INST_AA(inst); /* #of elements */ 1349 arg5 = -1; /* silence compiler warning */ 1350 ILOGV("|filled-new-array-range args=%d @0x%04x {regs=v%d-v%d}", 1351 vsrc1, ref, vdst, vdst+vsrc1-1); 1352 } else { 1353 arg5 = INST_A(inst); 1354 vsrc1 = INST_B(inst); /* #of elements */ 1355 ILOGV("|filled-new-array args=%d @0x%04x {regs=0x%04x %x}", 1356 vsrc1, ref, vdst, arg5); 1357 } 1358 1359 /* 1360 * Resolve the array class. 1361 */ 1362 arrayClass = dvmDexGetResolvedClass(methodClassDex, ref); 1363 if (arrayClass == NULL) { 1364 arrayClass = dvmResolveClass(curMethod->clazz, ref, false); 1365 if (arrayClass == NULL) 1366 GOTO_exceptionThrown(); 1367 } 1368 /* 1369 if (!dvmIsArrayClass(arrayClass)) { 1370 dvmThrowException("Ljava/lang/RuntimeError;", 1371 "filled-new-array needs array class"); 1372 GOTO_exceptionThrown(); 1373 } 1374 */ 1375 /* verifier guarantees this is an array class */ 1376 assert(dvmIsArrayClass(arrayClass)); 1377 assert(dvmIsClassInitialized(arrayClass)); 1378 1379 /* 1380 * Create an array of the specified type. 1381 */ 1382 LOGVV("+++ filled-new-array type is '%s'\n", arrayClass->descriptor); 1383 typeCh = arrayClass->descriptor[1]; 1384 if (typeCh == 'D' || typeCh == 'J') { 1385 /* category 2 primitives not allowed */ 1386 dvmThrowException("Ljava/lang/RuntimeError;", 1387 "bad filled array req"); 1388 GOTO_exceptionThrown(); 1389 } else if (typeCh != 'L' && typeCh != '[' && typeCh != 'I') { 1390 /* TODO: requires multiple "fill in" loops with different widths */ 1391 LOGE("non-int primitives not implemented\n"); 1392 dvmThrowException("Ljava/lang/InternalError;", 1393 "filled-new-array not implemented for anything but 'int'"); 1394 GOTO_exceptionThrown(); 1395 } 1396 1397 newArray = dvmAllocArrayByClass(arrayClass, vsrc1, ALLOC_DONT_TRACK); 1398 if (newArray == NULL) 1399 GOTO_exceptionThrown(); 1400 1401 /* 1402 * Fill in the elements. It's legal for vsrc1 to be zero. 1403 */ 1404 contents = (u4*) newArray->contents; 1405 if (methodCallRange) { 1406 for (i = 0; i < vsrc1; i++) 1407 contents[i] = GET_REGISTER(vdst+i); 1408 } else { 1409 assert(vsrc1 <= 5); 1410 if (vsrc1 == 5) { 1411 contents[4] = GET_REGISTER(arg5); 1412 vsrc1--; 1413 } 1414 for (i = 0; i < vsrc1; i++) { 1415 contents[i] = GET_REGISTER(vdst & 0x0f); 1416 vdst >>= 4; 1417 } 1418 } 1419 if (typeCh == 'L' || typeCh == '[') { 1420 dvmWriteBarrierArray(newArray, 0, newArray->length); 1421 } 1422 1423 retval.l = newArray; 1424 } 1425 FINISH(3); 1426GOTO_TARGET_END 1427 1428 1429GOTO_TARGET(invokeVirtual, bool methodCallRange) 1430 { 1431 Method* baseMethod; 1432 Object* thisPtr; 1433 1434 EXPORT_PC(); 1435 1436 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1437 ref = FETCH(1); /* method ref */ 1438 vdst = FETCH(2); /* 4 regs -or- first reg */ 1439 1440 /* 1441 * The object against which we are executing a method is always 1442 * in the first argument. 1443 */ 1444 if (methodCallRange) { 1445 assert(vsrc1 > 0); 1446 ILOGV("|invoke-virtual-range args=%d @0x%04x {regs=v%d-v%d}", 1447 vsrc1, ref, vdst, vdst+vsrc1-1); 1448 thisPtr = (Object*) GET_REGISTER(vdst); 1449 } else { 1450 assert((vsrc1>>4) > 0); 1451 ILOGV("|invoke-virtual args=%d @0x%04x {regs=0x%04x %x}", 1452 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1453 thisPtr = (Object*) GET_REGISTER(vdst & 0x0f); 1454 } 1455 1456 if (!checkForNull(thisPtr)) 1457 GOTO_exceptionThrown(); 1458 1459 /* 1460 * Resolve the method. This is the correct method for the static 1461 * type of the object. We also verify access permissions here. 1462 */ 1463 baseMethod = dvmDexGetResolvedMethod(methodClassDex, ref); 1464 if (baseMethod == NULL) { 1465 baseMethod = dvmResolveMethod(curMethod->clazz, ref,METHOD_VIRTUAL); 1466 if (baseMethod == NULL) { 1467 ILOGV("+ unknown method or access denied\n"); 1468 GOTO_exceptionThrown(); 1469 } 1470 } 1471 1472 /* 1473 * Combine the object we found with the vtable offset in the 1474 * method. 1475 */ 1476 assert(baseMethod->methodIndex < thisPtr->clazz->vtableCount); 1477 methodToCall = thisPtr->clazz->vtable[baseMethod->methodIndex]; 1478 1479#if defined(WITH_JIT) && (INTERP_TYPE == INTERP_DBG) 1480 callsiteClass = thisPtr->clazz; 1481#endif 1482 1483#if 0 1484 if (dvmIsAbstractMethod(methodToCall)) { 1485 /* 1486 * This can happen if you create two classes, Base and Sub, where 1487 * Sub is a sub-class of Base. Declare a protected abstract 1488 * method foo() in Base, and invoke foo() from a method in Base. 1489 * Base is an "abstract base class" and is never instantiated 1490 * directly. Now, Override foo() in Sub, and use Sub. This 1491 * Works fine unless Sub stops providing an implementation of 1492 * the method. 1493 */ 1494 dvmThrowException("Ljava/lang/AbstractMethodError;", 1495 "abstract method not implemented"); 1496 GOTO_exceptionThrown(); 1497 } 1498#else 1499 assert(!dvmIsAbstractMethod(methodToCall) || 1500 methodToCall->nativeFunc != NULL); 1501#endif 1502 1503 LOGVV("+++ base=%s.%s virtual[%d]=%s.%s\n", 1504 baseMethod->clazz->descriptor, baseMethod->name, 1505 (u4) baseMethod->methodIndex, 1506 methodToCall->clazz->descriptor, methodToCall->name); 1507 assert(methodToCall != NULL); 1508 1509#if 0 1510 if (vsrc1 != methodToCall->insSize) { 1511 LOGW("WRONG METHOD: base=%s.%s virtual[%d]=%s.%s\n", 1512 baseMethod->clazz->descriptor, baseMethod->name, 1513 (u4) baseMethod->methodIndex, 1514 methodToCall->clazz->descriptor, methodToCall->name); 1515 //dvmDumpClass(baseMethod->clazz); 1516 //dvmDumpClass(methodToCall->clazz); 1517 dvmDumpAllClasses(0); 1518 } 1519#endif 1520 1521 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1522 } 1523GOTO_TARGET_END 1524 1525GOTO_TARGET(invokeSuper, bool methodCallRange) 1526 { 1527 Method* baseMethod; 1528 u2 thisReg; 1529 1530 EXPORT_PC(); 1531 1532 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1533 ref = FETCH(1); /* method ref */ 1534 vdst = FETCH(2); /* 4 regs -or- first reg */ 1535 1536 if (methodCallRange) { 1537 ILOGV("|invoke-super-range args=%d @0x%04x {regs=v%d-v%d}", 1538 vsrc1, ref, vdst, vdst+vsrc1-1); 1539 thisReg = vdst; 1540 } else { 1541 ILOGV("|invoke-super args=%d @0x%04x {regs=0x%04x %x}", 1542 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1543 thisReg = vdst & 0x0f; 1544 } 1545 /* impossible in well-formed code, but we must check nevertheless */ 1546 if (!checkForNull((Object*) GET_REGISTER(thisReg))) 1547 GOTO_exceptionThrown(); 1548 1549 /* 1550 * Resolve the method. This is the correct method for the static 1551 * type of the object. We also verify access permissions here. 1552 * The first arg to dvmResolveMethod() is just the referring class 1553 * (used for class loaders and such), so we don't want to pass 1554 * the superclass into the resolution call. 1555 */ 1556 baseMethod = dvmDexGetResolvedMethod(methodClassDex, ref); 1557 if (baseMethod == NULL) { 1558 baseMethod = dvmResolveMethod(curMethod->clazz, ref,METHOD_VIRTUAL); 1559 if (baseMethod == NULL) { 1560 ILOGV("+ unknown method or access denied\n"); 1561 GOTO_exceptionThrown(); 1562 } 1563 } 1564 1565 /* 1566 * Combine the object we found with the vtable offset in the 1567 * method's class. 1568 * 1569 * We're using the current method's class' superclass, not the 1570 * superclass of "this". This is because we might be executing 1571 * in a method inherited from a superclass, and we want to run 1572 * in that class' superclass. 1573 */ 1574 if (baseMethod->methodIndex >= curMethod->clazz->super->vtableCount) { 1575 /* 1576 * Method does not exist in the superclass. Could happen if 1577 * superclass gets updated. 1578 */ 1579 dvmThrowException("Ljava/lang/NoSuchMethodError;", 1580 baseMethod->name); 1581 GOTO_exceptionThrown(); 1582 } 1583 methodToCall = curMethod->clazz->super->vtable[baseMethod->methodIndex]; 1584#if 0 1585 if (dvmIsAbstractMethod(methodToCall)) { 1586 dvmThrowException("Ljava/lang/AbstractMethodError;", 1587 "abstract method not implemented"); 1588 GOTO_exceptionThrown(); 1589 } 1590#else 1591 assert(!dvmIsAbstractMethod(methodToCall) || 1592 methodToCall->nativeFunc != NULL); 1593#endif 1594 LOGVV("+++ base=%s.%s super-virtual=%s.%s\n", 1595 baseMethod->clazz->descriptor, baseMethod->name, 1596 methodToCall->clazz->descriptor, methodToCall->name); 1597 assert(methodToCall != NULL); 1598 1599 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1600 } 1601GOTO_TARGET_END 1602 1603GOTO_TARGET(invokeInterface, bool methodCallRange) 1604 { 1605 Object* thisPtr; 1606 ClassObject* thisClass; 1607 1608 EXPORT_PC(); 1609 1610 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1611 ref = FETCH(1); /* method ref */ 1612 vdst = FETCH(2); /* 4 regs -or- first reg */ 1613 1614 /* 1615 * The object against which we are executing a method is always 1616 * in the first argument. 1617 */ 1618 if (methodCallRange) { 1619 assert(vsrc1 > 0); 1620 ILOGV("|invoke-interface-range args=%d @0x%04x {regs=v%d-v%d}", 1621 vsrc1, ref, vdst, vdst+vsrc1-1); 1622 thisPtr = (Object*) GET_REGISTER(vdst); 1623 } else { 1624 assert((vsrc1>>4) > 0); 1625 ILOGV("|invoke-interface args=%d @0x%04x {regs=0x%04x %x}", 1626 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1627 thisPtr = (Object*) GET_REGISTER(vdst & 0x0f); 1628 } 1629 if (!checkForNull(thisPtr)) 1630 GOTO_exceptionThrown(); 1631 1632 thisClass = thisPtr->clazz; 1633 1634#if defined(WITH_JIT) && (INTERP_TYPE == INTERP_DBG) 1635 callsiteClass = thisClass; 1636#endif 1637 1638 /* 1639 * Given a class and a method index, find the Method* with the 1640 * actual code we want to execute. 1641 */ 1642 methodToCall = dvmFindInterfaceMethodInCache(thisClass, ref, curMethod, 1643 methodClassDex); 1644 if (methodToCall == NULL) { 1645 assert(dvmCheckException(self)); 1646 GOTO_exceptionThrown(); 1647 } 1648 1649 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1650 } 1651GOTO_TARGET_END 1652 1653GOTO_TARGET(invokeDirect, bool methodCallRange) 1654 { 1655 u2 thisReg; 1656 1657 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1658 ref = FETCH(1); /* method ref */ 1659 vdst = FETCH(2); /* 4 regs -or- first reg */ 1660 1661 EXPORT_PC(); 1662 1663 if (methodCallRange) { 1664 ILOGV("|invoke-direct-range args=%d @0x%04x {regs=v%d-v%d}", 1665 vsrc1, ref, vdst, vdst+vsrc1-1); 1666 thisReg = vdst; 1667 } else { 1668 ILOGV("|invoke-direct args=%d @0x%04x {regs=0x%04x %x}", 1669 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1670 thisReg = vdst & 0x0f; 1671 } 1672 if (!checkForNull((Object*) GET_REGISTER(thisReg))) 1673 GOTO_exceptionThrown(); 1674 1675 methodToCall = dvmDexGetResolvedMethod(methodClassDex, ref); 1676 if (methodToCall == NULL) { 1677 methodToCall = dvmResolveMethod(curMethod->clazz, ref, 1678 METHOD_DIRECT); 1679 if (methodToCall == NULL) { 1680 ILOGV("+ unknown direct method\n"); // should be impossible 1681 GOTO_exceptionThrown(); 1682 } 1683 } 1684 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1685 } 1686GOTO_TARGET_END 1687 1688GOTO_TARGET(invokeStatic, bool methodCallRange) 1689 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1690 ref = FETCH(1); /* method ref */ 1691 vdst = FETCH(2); /* 4 regs -or- first reg */ 1692 1693 EXPORT_PC(); 1694 1695 if (methodCallRange) 1696 ILOGV("|invoke-static-range args=%d @0x%04x {regs=v%d-v%d}", 1697 vsrc1, ref, vdst, vdst+vsrc1-1); 1698 else 1699 ILOGV("|invoke-static args=%d @0x%04x {regs=0x%04x %x}", 1700 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1701 1702 methodToCall = dvmDexGetResolvedMethod(methodClassDex, ref); 1703 if (methodToCall == NULL) { 1704 methodToCall = dvmResolveMethod(curMethod->clazz, ref, METHOD_STATIC); 1705 if (methodToCall == NULL) { 1706 ILOGV("+ unknown method\n"); 1707 GOTO_exceptionThrown(); 1708 } 1709 1710 /* 1711 * The JIT needs dvmDexGetResolvedMethod() to return non-null. 1712 * Since we use the portable interpreter to build the trace, this extra 1713 * check is not needed for mterp. 1714 */ 1715 if (dvmDexGetResolvedMethod(methodClassDex, ref) == NULL) { 1716 /* Class initialization is still ongoing */ 1717 ABORT_JIT_TSELECT(); 1718 } 1719 } 1720 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1721GOTO_TARGET_END 1722 1723GOTO_TARGET(invokeVirtualQuick, bool methodCallRange) 1724 { 1725 Object* thisPtr; 1726 1727 EXPORT_PC(); 1728 1729 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1730 ref = FETCH(1); /* vtable index */ 1731 vdst = FETCH(2); /* 4 regs -or- first reg */ 1732 1733 /* 1734 * The object against which we are executing a method is always 1735 * in the first argument. 1736 */ 1737 if (methodCallRange) { 1738 assert(vsrc1 > 0); 1739 ILOGV("|invoke-virtual-quick-range args=%d @0x%04x {regs=v%d-v%d}", 1740 vsrc1, ref, vdst, vdst+vsrc1-1); 1741 thisPtr = (Object*) GET_REGISTER(vdst); 1742 } else { 1743 assert((vsrc1>>4) > 0); 1744 ILOGV("|invoke-virtual-quick args=%d @0x%04x {regs=0x%04x %x}", 1745 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1746 thisPtr = (Object*) GET_REGISTER(vdst & 0x0f); 1747 } 1748 1749 if (!checkForNull(thisPtr)) 1750 GOTO_exceptionThrown(); 1751 1752#if defined(WITH_JIT) && (INTERP_TYPE == INTERP_DBG) 1753 callsiteClass = thisPtr->clazz; 1754#endif 1755 1756 /* 1757 * Combine the object we found with the vtable offset in the 1758 * method. 1759 */ 1760 assert(ref < thisPtr->clazz->vtableCount); 1761 methodToCall = thisPtr->clazz->vtable[ref]; 1762 1763#if 0 1764 if (dvmIsAbstractMethod(methodToCall)) { 1765 dvmThrowException("Ljava/lang/AbstractMethodError;", 1766 "abstract method not implemented"); 1767 GOTO_exceptionThrown(); 1768 } 1769#else 1770 assert(!dvmIsAbstractMethod(methodToCall) || 1771 methodToCall->nativeFunc != NULL); 1772#endif 1773 1774 LOGVV("+++ virtual[%d]=%s.%s\n", 1775 ref, methodToCall->clazz->descriptor, methodToCall->name); 1776 assert(methodToCall != NULL); 1777 1778 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1779 } 1780GOTO_TARGET_END 1781 1782GOTO_TARGET(invokeSuperQuick, bool methodCallRange) 1783 { 1784 u2 thisReg; 1785 1786 EXPORT_PC(); 1787 1788 vsrc1 = INST_AA(inst); /* AA (count) or BA (count + arg 5) */ 1789 ref = FETCH(1); /* vtable index */ 1790 vdst = FETCH(2); /* 4 regs -or- first reg */ 1791 1792 if (methodCallRange) { 1793 ILOGV("|invoke-super-quick-range args=%d @0x%04x {regs=v%d-v%d}", 1794 vsrc1, ref, vdst, vdst+vsrc1-1); 1795 thisReg = vdst; 1796 } else { 1797 ILOGV("|invoke-super-quick args=%d @0x%04x {regs=0x%04x %x}", 1798 vsrc1 >> 4, ref, vdst, vsrc1 & 0x0f); 1799 thisReg = vdst & 0x0f; 1800 } 1801 /* impossible in well-formed code, but we must check nevertheless */ 1802 if (!checkForNull((Object*) GET_REGISTER(thisReg))) 1803 GOTO_exceptionThrown(); 1804 1805#if 0 /* impossible in optimized + verified code */ 1806 if (ref >= curMethod->clazz->super->vtableCount) { 1807 dvmThrowException("Ljava/lang/NoSuchMethodError;", NULL); 1808 GOTO_exceptionThrown(); 1809 } 1810#else 1811 assert(ref < curMethod->clazz->super->vtableCount); 1812#endif 1813 1814 /* 1815 * Combine the object we found with the vtable offset in the 1816 * method's class. 1817 * 1818 * We're using the current method's class' superclass, not the 1819 * superclass of "this". This is because we might be executing 1820 * in a method inherited from a superclass, and we want to run 1821 * in the method's class' superclass. 1822 */ 1823 methodToCall = curMethod->clazz->super->vtable[ref]; 1824 1825#if 0 1826 if (dvmIsAbstractMethod(methodToCall)) { 1827 dvmThrowException("Ljava/lang/AbstractMethodError;", 1828 "abstract method not implemented"); 1829 GOTO_exceptionThrown(); 1830 } 1831#else 1832 assert(!dvmIsAbstractMethod(methodToCall) || 1833 methodToCall->nativeFunc != NULL); 1834#endif 1835 LOGVV("+++ super-virtual[%d]=%s.%s\n", 1836 ref, methodToCall->clazz->descriptor, methodToCall->name); 1837 assert(methodToCall != NULL); 1838 1839 GOTO_invokeMethod(methodCallRange, methodToCall, vsrc1, vdst); 1840 } 1841GOTO_TARGET_END 1842 1843 1844 /* 1845 * General handling for return-void, return, and return-wide. Put the 1846 * return value in "retval" before jumping here. 1847 */ 1848GOTO_TARGET(returnFromMethod) 1849 { 1850 StackSaveArea* saveArea; 1851 1852 /* 1853 * We must do this BEFORE we pop the previous stack frame off, so 1854 * that the GC can see the return value (if any) in the local vars. 1855 * 1856 * Since this is now an interpreter switch point, we must do it before 1857 * we do anything at all. 1858 */ 1859 PERIODIC_CHECKS(kInterpEntryReturn, 0); 1860 1861 ILOGV("> retval=0x%llx (leaving %s.%s %s)", 1862 retval.j, curMethod->clazz->descriptor, curMethod->name, 1863 curMethod->shorty); 1864 //DUMP_REGS(curMethod, fp); 1865 1866 saveArea = SAVEAREA_FROM_FP(fp); 1867 1868#ifdef EASY_GDB 1869 debugSaveArea = saveArea; 1870#endif 1871#if (INTERP_TYPE == INTERP_DBG) 1872 TRACE_METHOD_EXIT(self, curMethod); 1873#endif 1874 1875 /* back up to previous frame and see if we hit a break */ 1876 fp = saveArea->prevFrame; 1877 assert(fp != NULL); 1878 if (dvmIsBreakFrame(fp)) { 1879 /* bail without popping the method frame from stack */ 1880 LOGVV("+++ returned into break frame\n"); 1881#if defined(WITH_JIT) 1882 /* Let the Jit know the return is terminating normally */ 1883 CHECK_JIT_VOID(); 1884#endif 1885 GOTO_bail(); 1886 } 1887 1888 /* update thread FP, and reset local variables */ 1889 self->curFrame = fp; 1890 curMethod = SAVEAREA_FROM_FP(fp)->method; 1891 //methodClass = curMethod->clazz; 1892 methodClassDex = curMethod->clazz->pDvmDex; 1893 pc = saveArea->savedPc; 1894 ILOGD("> (return to %s.%s %s)", curMethod->clazz->descriptor, 1895 curMethod->name, curMethod->shorty); 1896 1897 /* use FINISH on the caller's invoke instruction */ 1898 //u2 invokeInstr = INST_INST(FETCH(0)); 1899 if (true /*invokeInstr >= OP_INVOKE_VIRTUAL && 1900 invokeInstr <= OP_INVOKE_INTERFACE*/) 1901 { 1902 FINISH(3); 1903 } else { 1904 //LOGE("Unknown invoke instr %02x at %d\n", 1905 // invokeInstr, (int) (pc - curMethod->insns)); 1906 assert(false); 1907 } 1908 } 1909GOTO_TARGET_END 1910 1911 1912 /* 1913 * Jump here when the code throws an exception. 1914 * 1915 * By the time we get here, the Throwable has been created and the stack 1916 * trace has been saved off. 1917 */ 1918GOTO_TARGET(exceptionThrown) 1919 { 1920 Object* exception; 1921 int catchRelPc; 1922 1923 /* 1924 * Since this is now an interpreter switch point, we must do it before 1925 * we do anything at all. 1926 */ 1927 PERIODIC_CHECKS(kInterpEntryThrow, 0); 1928 1929#if defined(WITH_JIT) 1930 // Something threw during trace selection - abort the current trace 1931 ABORT_JIT_TSELECT(); 1932#endif 1933 /* 1934 * We save off the exception and clear the exception status. While 1935 * processing the exception we might need to load some Throwable 1936 * classes, and we don't want class loader exceptions to get 1937 * confused with this one. 1938 */ 1939 assert(dvmCheckException(self)); 1940 exception = dvmGetException(self); 1941 dvmAddTrackedAlloc(exception, self); 1942 dvmClearException(self); 1943 1944 LOGV("Handling exception %s at %s:%d\n", 1945 exception->clazz->descriptor, curMethod->name, 1946 dvmLineNumFromPC(curMethod, pc - curMethod->insns)); 1947 1948#if (INTERP_TYPE == INTERP_DBG) 1949 /* 1950 * Tell the debugger about it. 1951 * 1952 * TODO: if the exception was thrown by interpreted code, control 1953 * fell through native, and then back to us, we will report the 1954 * exception at the point of the throw and again here. We can avoid 1955 * this by not reporting exceptions when we jump here directly from 1956 * the native call code above, but then we won't report exceptions 1957 * that were thrown *from* the JNI code (as opposed to *through* it). 1958 * 1959 * The correct solution is probably to ignore from-native exceptions 1960 * here, and have the JNI exception code do the reporting to the 1961 * debugger. 1962 */ 1963 if (gDvm.debuggerActive) { 1964 void* catchFrame; 1965 catchRelPc = dvmFindCatchBlock(self, pc - curMethod->insns, 1966 exception, true, &catchFrame); 1967 dvmDbgPostException(fp, pc - curMethod->insns, catchFrame, 1968 catchRelPc, exception); 1969 } 1970#endif 1971 1972 /* 1973 * We need to unroll to the catch block or the nearest "break" 1974 * frame. 1975 * 1976 * A break frame could indicate that we have reached an intermediate 1977 * native call, or have gone off the top of the stack and the thread 1978 * needs to exit. Either way, we return from here, leaving the 1979 * exception raised. 1980 * 1981 * If we do find a catch block, we want to transfer execution to 1982 * that point. 1983 * 1984 * Note this can cause an exception while resolving classes in 1985 * the "catch" blocks. 1986 */ 1987 catchRelPc = dvmFindCatchBlock(self, pc - curMethod->insns, 1988 exception, false, (void*)&fp); 1989 1990 /* 1991 * Restore the stack bounds after an overflow. This isn't going to 1992 * be correct in all circumstances, e.g. if JNI code devours the 1993 * exception this won't happen until some other exception gets 1994 * thrown. If the code keeps pushing the stack bounds we'll end 1995 * up aborting the VM. 1996 * 1997 * Note we want to do this *after* the call to dvmFindCatchBlock, 1998 * because that may need extra stack space to resolve exception 1999 * classes (e.g. through a class loader). 2000 * 2001 * It's possible for the stack overflow handling to cause an 2002 * exception (specifically, class resolution in a "catch" block 2003 * during the call above), so we could see the thread's overflow 2004 * flag raised but actually be running in a "nested" interpreter 2005 * frame. We don't allow doubled-up StackOverflowErrors, so 2006 * we can check for this by just looking at the exception type 2007 * in the cleanup function. Also, we won't unroll past the SOE 2008 * point because the more-recent exception will hit a break frame 2009 * as it unrolls to here. 2010 */ 2011 if (self->stackOverflowed) 2012 dvmCleanupStackOverflow(self, exception); 2013 2014 if (catchRelPc < 0) { 2015 /* falling through to JNI code or off the bottom of the stack */ 2016#if DVM_SHOW_EXCEPTION >= 2 2017 LOGD("Exception %s from %s:%d not caught locally\n", 2018 exception->clazz->descriptor, dvmGetMethodSourceFile(curMethod), 2019 dvmLineNumFromPC(curMethod, pc - curMethod->insns)); 2020#endif 2021 dvmSetException(self, exception); 2022 dvmReleaseTrackedAlloc(exception, self); 2023 GOTO_bail(); 2024 } 2025 2026#if DVM_SHOW_EXCEPTION >= 3 2027 { 2028 const Method* catchMethod = SAVEAREA_FROM_FP(fp)->method; 2029 LOGD("Exception %s thrown from %s:%d to %s:%d\n", 2030 exception->clazz->descriptor, dvmGetMethodSourceFile(curMethod), 2031 dvmLineNumFromPC(curMethod, pc - curMethod->insns), 2032 dvmGetMethodSourceFile(catchMethod), 2033 dvmLineNumFromPC(catchMethod, catchRelPc)); 2034 } 2035#endif 2036 2037 /* 2038 * Adjust local variables to match self->curFrame and the 2039 * updated PC. 2040 */ 2041 //fp = (u4*) self->curFrame; 2042 curMethod = SAVEAREA_FROM_FP(fp)->method; 2043 //methodClass = curMethod->clazz; 2044 methodClassDex = curMethod->clazz->pDvmDex; 2045 pc = curMethod->insns + catchRelPc; 2046 ILOGV("> pc <-- %s.%s %s", curMethod->clazz->descriptor, 2047 curMethod->name, curMethod->shorty); 2048 DUMP_REGS(curMethod, fp, false); // show all regs 2049 2050 /* 2051 * Restore the exception if the handler wants it. 2052 * 2053 * The Dalvik spec mandates that, if an exception handler wants to 2054 * do something with the exception, the first instruction executed 2055 * must be "move-exception". We can pass the exception along 2056 * through the thread struct, and let the move-exception instruction 2057 * clear it for us. 2058 * 2059 * If the handler doesn't call move-exception, we don't want to 2060 * finish here with an exception still pending. 2061 */ 2062 if (INST_INST(FETCH(0)) == OP_MOVE_EXCEPTION) 2063 dvmSetException(self, exception); 2064 2065 dvmReleaseTrackedAlloc(exception, self); 2066 FINISH(0); 2067 } 2068GOTO_TARGET_END 2069 2070 2071 2072 /* 2073 * General handling for invoke-{virtual,super,direct,static,interface}, 2074 * including "quick" variants. 2075 * 2076 * Set "methodToCall" to the Method we're calling, and "methodCallRange" 2077 * depending on whether this is a "/range" instruction. 2078 * 2079 * For a range call: 2080 * "vsrc1" holds the argument count (8 bits) 2081 * "vdst" holds the first argument in the range 2082 * For a non-range call: 2083 * "vsrc1" holds the argument count (4 bits) and the 5th argument index 2084 * "vdst" holds four 4-bit register indices 2085 * 2086 * The caller must EXPORT_PC before jumping here, because any method 2087 * call can throw a stack overflow exception. 2088 */ 2089GOTO_TARGET(invokeMethod, bool methodCallRange, const Method* _methodToCall, 2090 u2 count, u2 regs) 2091 { 2092 STUB_HACK(vsrc1 = count; vdst = regs; methodToCall = _methodToCall;); 2093 2094 //printf("range=%d call=%p count=%d regs=0x%04x\n", 2095 // methodCallRange, methodToCall, count, regs); 2096 //printf(" --> %s.%s %s\n", methodToCall->clazz->descriptor, 2097 // methodToCall->name, methodToCall->shorty); 2098 2099 u4* outs; 2100 int i; 2101 2102 /* 2103 * Copy args. This may corrupt vsrc1/vdst. 2104 */ 2105 if (methodCallRange) { 2106 // could use memcpy or a "Duff's device"; most functions have 2107 // so few args it won't matter much 2108 assert(vsrc1 <= curMethod->outsSize); 2109 assert(vsrc1 == methodToCall->insSize); 2110 outs = OUTS_FROM_FP(fp, vsrc1); 2111 for (i = 0; i < vsrc1; i++) 2112 outs[i] = GET_REGISTER(vdst+i); 2113 } else { 2114 u4 count = vsrc1 >> 4; 2115 2116 assert(count <= curMethod->outsSize); 2117 assert(count == methodToCall->insSize); 2118 assert(count <= 5); 2119 2120 outs = OUTS_FROM_FP(fp, count); 2121#if 0 2122 if (count == 5) { 2123 outs[4] = GET_REGISTER(vsrc1 & 0x0f); 2124 count--; 2125 } 2126 for (i = 0; i < (int) count; i++) { 2127 outs[i] = GET_REGISTER(vdst & 0x0f); 2128 vdst >>= 4; 2129 } 2130#else 2131 // This version executes fewer instructions but is larger 2132 // overall. Seems to be a teensy bit faster. 2133 assert((vdst >> 16) == 0); // 16 bits -or- high 16 bits clear 2134 switch (count) { 2135 case 5: 2136 outs[4] = GET_REGISTER(vsrc1 & 0x0f); 2137 case 4: 2138 outs[3] = GET_REGISTER(vdst >> 12); 2139 case 3: 2140 outs[2] = GET_REGISTER((vdst & 0x0f00) >> 8); 2141 case 2: 2142 outs[1] = GET_REGISTER((vdst & 0x00f0) >> 4); 2143 case 1: 2144 outs[0] = GET_REGISTER(vdst & 0x0f); 2145 default: 2146 ; 2147 } 2148#endif 2149 } 2150 } 2151 2152 /* 2153 * (This was originally a "goto" target; I've kept it separate from the 2154 * stuff above in case we want to refactor things again.) 2155 * 2156 * At this point, we have the arguments stored in the "outs" area of 2157 * the current method's stack frame, and the method to call in 2158 * "methodToCall". Push a new stack frame. 2159 */ 2160 { 2161 StackSaveArea* newSaveArea; 2162 u4* newFp; 2163 2164 ILOGV("> %s%s.%s %s", 2165 dvmIsNativeMethod(methodToCall) ? "(NATIVE) " : "", 2166 methodToCall->clazz->descriptor, methodToCall->name, 2167 methodToCall->shorty); 2168 2169 newFp = (u4*) SAVEAREA_FROM_FP(fp) - methodToCall->registersSize; 2170 newSaveArea = SAVEAREA_FROM_FP(newFp); 2171 2172 /* verify that we have enough space */ 2173 if (true) { 2174 u1* bottom; 2175 bottom = (u1*) newSaveArea - methodToCall->outsSize * sizeof(u4); 2176 if (bottom < self->interpStackEnd) { 2177 /* stack overflow */ 2178 LOGV("Stack overflow on method call (start=%p end=%p newBot=%p(%d) size=%d '%s')\n", 2179 self->interpStackStart, self->interpStackEnd, bottom, 2180 (u1*) fp - bottom, self->interpStackSize, 2181 methodToCall->name); 2182 dvmHandleStackOverflow(self, methodToCall); 2183 assert(dvmCheckException(self)); 2184 GOTO_exceptionThrown(); 2185 } 2186 //LOGD("+++ fp=%p newFp=%p newSave=%p bottom=%p\n", 2187 // fp, newFp, newSaveArea, bottom); 2188 } 2189 2190#ifdef LOG_INSTR 2191 if (methodToCall->registersSize > methodToCall->insSize) { 2192 /* 2193 * This makes valgrind quiet when we print registers that 2194 * haven't been initialized. Turn it off when the debug 2195 * messages are disabled -- we want valgrind to report any 2196 * used-before-initialized issues. 2197 */ 2198 memset(newFp, 0xcc, 2199 (methodToCall->registersSize - methodToCall->insSize) * 4); 2200 } 2201#endif 2202 2203#ifdef EASY_GDB 2204 newSaveArea->prevSave = SAVEAREA_FROM_FP(fp); 2205#endif 2206 newSaveArea->prevFrame = fp; 2207 newSaveArea->savedPc = pc; 2208#if defined(WITH_JIT) 2209 newSaveArea->returnAddr = 0; 2210#endif 2211 newSaveArea->method = methodToCall; 2212 2213 if (!dvmIsNativeMethod(methodToCall)) { 2214 /* 2215 * "Call" interpreted code. Reposition the PC, update the 2216 * frame pointer and other local state, and continue. 2217 */ 2218 curMethod = methodToCall; 2219 methodClassDex = curMethod->clazz->pDvmDex; 2220 pc = methodToCall->insns; 2221 fp = self->curFrame = newFp; 2222#ifdef EASY_GDB 2223 debugSaveArea = SAVEAREA_FROM_FP(newFp); 2224#endif 2225#if INTERP_TYPE == INTERP_DBG 2226 debugIsMethodEntry = true; // profiling, debugging 2227#endif 2228 ILOGD("> pc <-- %s.%s %s", curMethod->clazz->descriptor, 2229 curMethod->name, curMethod->shorty); 2230 DUMP_REGS(curMethod, fp, true); // show input args 2231 FINISH(0); // jump to method start 2232 } else { 2233 /* set this up for JNI locals, even if not a JNI native */ 2234#ifdef USE_INDIRECT_REF 2235 newSaveArea->xtra.localRefCookie = self->jniLocalRefTable.segmentState.all; 2236#else 2237 newSaveArea->xtra.localRefCookie = self->jniLocalRefTable.nextEntry; 2238#endif 2239 2240 self->curFrame = newFp; 2241 2242 DUMP_REGS(methodToCall, newFp, true); // show input args 2243 2244#if (INTERP_TYPE == INTERP_DBG) 2245 if (gDvm.debuggerActive) { 2246 dvmDbgPostLocationEvent(methodToCall, -1, 2247 dvmGetThisPtr(curMethod, fp), DBG_METHOD_ENTRY); 2248 } 2249#endif 2250#if (INTERP_TYPE == INTERP_DBG) 2251 TRACE_METHOD_ENTER(self, methodToCall); 2252#endif 2253 2254 { 2255 ILOGD("> native <-- %s.%s %s", methodToCall->clazz->descriptor, 2256 methodToCall->name, methodToCall->shorty); 2257 } 2258 2259#if defined(WITH_JIT) 2260 /* Allow the Jit to end any pending trace building */ 2261 CHECK_JIT_VOID(); 2262#endif 2263 2264 /* 2265 * Jump through native call bridge. Because we leave no 2266 * space for locals on native calls, "newFp" points directly 2267 * to the method arguments. 2268 */ 2269 (*methodToCall->nativeFunc)(newFp, &retval, methodToCall, self); 2270 2271#if (INTERP_TYPE == INTERP_DBG) 2272 if (gDvm.debuggerActive) { 2273 dvmDbgPostLocationEvent(methodToCall, -1, 2274 dvmGetThisPtr(curMethod, fp), DBG_METHOD_EXIT); 2275 } 2276#endif 2277#if (INTERP_TYPE == INTERP_DBG) 2278 TRACE_METHOD_EXIT(self, methodToCall); 2279#endif 2280 2281 /* pop frame off */ 2282 dvmPopJniLocals(self, newSaveArea); 2283 self->curFrame = fp; 2284 2285 /* 2286 * If the native code threw an exception, or interpreted code 2287 * invoked by the native call threw one and nobody has cleared 2288 * it, jump to our local exception handling. 2289 */ 2290 if (dvmCheckException(self)) { 2291 LOGV("Exception thrown by/below native code\n"); 2292 GOTO_exceptionThrown(); 2293 } 2294 2295 ILOGD("> retval=0x%llx (leaving native)", retval.j); 2296 ILOGD("> (return from native %s.%s to %s.%s %s)", 2297 methodToCall->clazz->descriptor, methodToCall->name, 2298 curMethod->clazz->descriptor, curMethod->name, 2299 curMethod->shorty); 2300 2301 //u2 invokeInstr = INST_INST(FETCH(0)); 2302 if (true /*invokeInstr >= OP_INVOKE_VIRTUAL && 2303 invokeInstr <= OP_INVOKE_INTERFACE*/) 2304 { 2305 FINISH(3); 2306 } else { 2307 //LOGE("Unknown invoke instr %02x at %d\n", 2308 // invokeInstr, (int) (pc - curMethod->insns)); 2309 assert(false); 2310 } 2311 } 2312 } 2313 assert(false); // should not get here 2314GOTO_TARGET_END 2315 2316/* File: cstubs/enddefs.c */ 2317 2318/* undefine "magic" name remapping */ 2319#undef retval 2320#undef pc 2321#undef fp 2322#undef curMethod 2323#undef methodClassDex 2324#undef self 2325#undef debugTrackedRefStart 2326 2327