1// 2// Copyright (C) 2002-2007 International Business Machines Corporation 3// and others. All rights reserved. 4// 5// file: regeximp.h 6// 7// ICU Regular Expressions, 8// Definitions of constant values used in the compiled form of 9// a regular expression pattern. 10// 11 12#ifndef _REGEXIMP_H 13#define _REGEXIMP_H 14 15#include "cmemory.h" 16 17U_NAMESPACE_BEGIN 18 19#ifdef REGEX_DEBUG /* For debugging, define REGEX_DEBUG in regex.h, not here in this file. */ 20// 21// debugging options. Enable one or more of the three #defines immediately following 22// 23 24//#define REGEX_SCAN_DEBUG 25#define REGEX_DUMP_DEBUG 26#define REGEX_RUN_DEBUG 27 28// End of #defines inteded to be directly set. 29 30#include <stdio.h> 31#endif 32 33#ifdef REGEX_SCAN_DEBUG 34#define REGEX_SCAN_DEBUG_PRINTF(a) printf a 35#else 36#define REGEX_SCAN_DEBUG_PRINTF(a) 37#endif 38 39#ifdef REGEX_DUMP_DEBUG 40#define REGEX_DUMP_DEBUG_PRINTF(a) printf a 41#else 42#define REGEX_DUMP_DEBUG_PRINTF(a) 43#endif 44 45#ifdef REGEX_RUN_DEBUG 46#define REGEX_RUN_DEBUG_PRINTF(a) printf a 47#define REGEX_DUMP_DEBUG_PRINTF(a) printf a 48#else 49#define REGEX_RUN_DEBUG_PRINTF(a) 50#endif 51 52 53// 54// Opcode types In the compiled form of the regexp, these are the type, or opcodes, 55// of the entries. 56// 57enum { 58 URX_RESERVED_OP = 0, // For multi-operand ops, most non-first words. 59 URX_RESERVED_OP_N = 255, // For multi-operand ops, negative operand values. 60 URX_BACKTRACK = 1, // Force a backtrack, as if a match test had failed. 61 URX_END = 2, 62 URX_ONECHAR = 3, // Value field is the 21 bit unicode char to match 63 URX_STRING = 4, // Value field is index of string start 64 URX_STRING_LEN = 5, // Value field is string length (code units) 65 URX_STATE_SAVE = 6, // Value field is pattern position to push 66 URX_NOP = 7, 67 URX_START_CAPTURE = 8, // Value field is capture group number. 68 URX_END_CAPTURE = 9, // Value field is capture group number 69 URX_STATIC_SETREF = 10, // Value field is index of set in array of sets. 70 URX_SETREF = 11, // Value field is index of set in array of sets. 71 URX_DOTANY = 12, 72 URX_JMP = 13, // Value field is destination position in 73 // the pattern. 74 URX_FAIL = 14, // Stop match operation, No match. 75 76 URX_JMP_SAV = 15, // Operand: JMP destination location 77 URX_BACKSLASH_B = 16, // Value field: 0: \b 1: \B 78 URX_BACKSLASH_G = 17, 79 URX_JMP_SAV_X = 18, // Conditional JMP_SAV, 80 // Used in (x)+, breaks loop on zero length match. 81 // Operand: Jmp destination. 82 URX_BACKSLASH_X = 19, 83 URX_BACKSLASH_Z = 20, // \z Unconditional end of line. 84 85 URX_DOTANY_ALL = 21, // ., in the . matches any mode. 86 URX_BACKSLASH_D = 22, // Value field: 0: \d 1: \D 87 URX_CARET = 23, // Value field: 1: multi-line mode. 88 URX_DOLLAR = 24, // Also for \Z 89 90 URX_CTR_INIT = 25, // Counter Inits for {Interval} loops. 91 URX_CTR_INIT_NG = 26, // 2 kinds, normal and non-greedy. 92 // These are 4 word opcodes. See description. 93 // First Operand: Data loc of counter variable 94 // 2nd Operand: Pat loc of the URX_CTR_LOOPx 95 // at the end of the loop. 96 // 3rd Operand: Minimum count. 97 // 4th Operand: Max count, -1 for unbounded. 98 99 URX_DOTANY_UNIX = 27, // '.' operator in UNIX_LINES mode, only \n marks end of line. 100 101 URX_CTR_LOOP = 28, // Loop Ops for {interval} loops. 102 URX_CTR_LOOP_NG = 29, // Also in three flavors. 103 // Operand is loc of corresponding CTR_INIT. 104 105 URX_CARET_M_UNIX = 30, // '^' operator, test for start of line in multi-line 106 // plus UNIX_LINES mode. 107 108 URX_RELOC_OPRND = 31, // Operand value in multi-operand ops that refers 109 // back into compiled pattern code, and thus must 110 // be relocated when inserting/deleting ops in code. 111 112 URX_STO_SP = 32, // Store the stack ptr. Operand is location within 113 // matcher data (not stack data) to store it. 114 URX_LD_SP = 33, // Load the stack pointer. Operand is location 115 // to load from. 116 URX_BACKREF = 34, // Back Reference. Parameter is the index of the 117 // capture group variables in the state stack frame. 118 URX_STO_INP_LOC = 35, // Store the input location. Operand is location 119 // within the matcher stack frame. 120 URX_JMPX = 36, // Conditional JMP. 121 // First Operand: JMP target location. 122 // Second Operand: Data location containing an 123 // input position. If current input position == 124 // saved input position, FAIL rather than taking 125 // the JMP 126 URX_LA_START = 37, // Starting a LookAround expression. 127 // Save InputPos and SP in static data. 128 // Operand: Static data offset for the save 129 URX_LA_END = 38, // Ending a Lookaround expression. 130 // Restore InputPos and Stack to saved values. 131 // Operand: Static data offset for saved data. 132 URX_ONECHAR_I = 39, // Test for case-insensitive match of a literal character. 133 // Operand: the literal char. 134 URX_STRING_I = 40, // Case insensitive string compare. 135 // First Operand: Index of start of string in string literals 136 // Second Operand (next word in compiled code): 137 // the length of the string. 138 URX_BACKREF_I = 41, // Case insensitive back reference. 139 // Parameter is the index of the 140 // capture group variables in the state stack frame. 141 URX_DOLLAR_M = 42, // $ in multi-line mode. 142 URX_CARET_M = 43, // ^ in multi-line mode. 143 URX_LB_START = 44, // LookBehind Start. 144 // Paramater is data location 145 URX_LB_CONT = 45, // LookBehind Continue. 146 // Param 0: the data location 147 // Param 1: The minimum length of the look-behind match 148 // Param 2: The max length of the look-behind match 149 URX_LB_END = 46, // LookBehind End. 150 // Parameter is the data location. 151 // Check that match ended at the right spot, 152 // Restore original input string len. 153 URX_LBN_CONT = 47, // Negative LookBehind Continue 154 // Param 0: the data location 155 // Param 1: The minimum length of the look-behind match 156 // Param 2: The max length of the look-behind match 157 // Param 3: The pattern loc following the look-behind block. 158 URX_LBN_END = 48, // Negative LookBehind end 159 // Parameter is the data location. 160 // Check that the match ended at the right spot. 161 URX_STAT_SETREF_N = 49, // Reference to a prebuilt set (e.g. \w), negated 162 // Operand is index of set in array of sets. 163 URX_LOOP_SR_I = 50, // Init a [set]* loop. 164 // Operand is the sets index in array of user sets. 165 URX_LOOP_C = 51, // Continue a [set]* or OneChar* loop. 166 // Operand is a matcher static data location. 167 // Must always immediately follow LOOP_x_I instruction. 168 URX_LOOP_DOT_I = 52, // .*, initialization of the optimized loop. 169 // Operand value: 170 // bit 0: 171 // 0: Normal (. doesn't match new-line) mode. 172 // 1: . matches new-line mode. 173 // bit 1: controls what new-lines are recognized by this operation. 174 // 0: All Unicode New-lines 175 // 1: UNIX_LINES, \u000a only. 176 URX_BACKSLASH_BU = 53, // \b or \B in UREGEX_UWORD mode, using Unicode style 177 // word boundaries. 178 URX_DOLLAR_D = 54, // $ end of input test, in UNIX_LINES mode. 179 URX_DOLLAR_MD = 55 // $ end of input test, in MULTI_LINE and UNIX_LINES mode. 180 181}; 182 183// Keep this list of opcode names in sync with the above enum 184// Used for debug printing only. 185#define URX_OPCODE_NAMES \ 186 " ", \ 187 "BACKTRACK", \ 188 "END", \ 189 "ONECHAR", \ 190 "STRING", \ 191 "STRING_LEN", \ 192 "STATE_SAVE", \ 193 "NOP", \ 194 "START_CAPTURE", \ 195 "END_CAPTURE", \ 196 "URX_STATIC_SETREF", \ 197 "SETREF", \ 198 "DOTANY", \ 199 "JMP", \ 200 "FAIL", \ 201 "JMP_SAV", \ 202 "BACKSLASH_B", \ 203 "BACKSLASH_G", \ 204 "JMP_SAV_X", \ 205 "BACKSLASH_X", \ 206 "BACKSLASH_Z", \ 207 "DOTANY_ALL", \ 208 "BACKSLASH_D", \ 209 "CARET", \ 210 "DOLLAR", \ 211 "CTR_INIT", \ 212 "CTR_INIT_NG", \ 213 "DOTANY_UNIX", \ 214 "CTR_LOOP", \ 215 "CTR_LOOP_NG", \ 216 "URX_CARET_M_UNIX", \ 217 "RELOC_OPRND", \ 218 "STO_SP", \ 219 "LD_SP", \ 220 "BACKREF", \ 221 "STO_INP_LOC", \ 222 "JMPX", \ 223 "LA_START", \ 224 "LA_END", \ 225 "ONECHAR_I", \ 226 "STRING_I", \ 227 "BACKREF_I", \ 228 "DOLLAR_M", \ 229 "CARET_M", \ 230 "LB_START", \ 231 "LB_CONT", \ 232 "LB_END", \ 233 "LBN_CONT", \ 234 "LBN_END", \ 235 "STAT_SETREF_N", \ 236 "LOOP_SR_I", \ 237 "LOOP_C", \ 238 "LOOP_DOT_I", \ 239 "BACKSLASH_BU", \ 240 "DOLLAR_D", \ 241 "DOLLAR_MD" 242 243 244// 245// Convenience macros for assembling and disassembling a compiled operation. 246// 247#define URX_BUILD(type, val) (int32_t)((type << 24) | (val)) 248#define URX_TYPE(x) ((uint32_t)(x) >> 24) 249#define URX_VAL(x) ((x) & 0xffffff) 250 251 252// 253// Access to Unicode Sets composite character properties 254// The sets are accessed by the match engine for things like \w (word boundary) 255// 256enum { 257 URX_ISWORD_SET = 1, 258 URX_ISALNUM_SET = 2, 259 URX_ISALPHA_SET = 3, 260 URX_ISSPACE_SET = 4, 261 262 URX_GC_NORMAL, // Sets for finding grapheme cluster boundaries. 263 URX_GC_EXTEND, 264 URX_GC_CONTROL, 265 URX_GC_L, 266 URX_GC_LV, 267 URX_GC_LVT, 268 URX_GC_V, 269 URX_GC_T, 270 271 URX_LAST_SET, 272 273 URX_NEG_SET = 0x800000 // Flag bit to reverse sense of set 274 // membership test. 275}; 276 277 278// 279// Match Engine State Stack Frame Layout. 280// 281struct REStackFrame { 282 int32_t fInputIdx; // Position of next character in the input string 283 int32_t fPatIdx; // Position of next Op in the compiled pattern 284 int32_t fExtra[2]; // Extra state, for capture group start/ends 285 // atomic parentheses, repeat counts, etc. 286 // Locations assigned at pattern compile time. 287}; 288 289// 290// Start-Of-Match type. Used by find() to quickly scan to positions where a 291// match might start before firing up the full match engine. 292// 293enum StartOfMatch { 294 START_NO_INFO, // No hint available. 295 START_CHAR, // Match starts with a literal code point. 296 START_SET, // Match starts with something matching a set. 297 START_START, // Match starts at start of buffer only (^ or \A) 298 START_LINE, // Match starts with ^ in multi-line mode. 299 START_STRING // Match starts with a literal string. 300}; 301 302#define START_OF_MATCH_STR(v) ((v)==START_NO_INFO? "START_NO_INFO" : \ 303 (v)==START_CHAR? "START_CHAR" : \ 304 (v)==START_SET? "START_SET" : \ 305 (v)==START_START? "START_START" : \ 306 (v)==START_LINE? "START_LINE" : \ 307 (v)==START_STRING? "START_STRING" : \ 308 "ILLEGAL") 309 310 311// 312// 8 bit set, to fast-path latin-1 set membership tests. 313// 314struct Regex8BitSet : public UMemory { 315 inline Regex8BitSet(); 316 inline void operator = (const Regex8BitSet &s); 317 inline void init(const UnicodeSet *src); 318 inline UBool contains(UChar32 c); 319 inline void add(UChar32 c); 320 int8_t d[32]; 321}; 322 323inline Regex8BitSet::Regex8BitSet() { 324 uprv_memset(d, 0, sizeof(d)); 325} 326 327inline UBool Regex8BitSet::contains(UChar32 c) { 328 // No bounds checking! This is deliberate. 329 return ((d[c>>3] & 1 <<(c&7)) != 0); 330} 331 332inline void Regex8BitSet::add(UChar32 c) { 333 d[c>>3] |= 1 << (c&7); 334} 335 336inline void Regex8BitSet::init(const UnicodeSet *s) { 337 if (s != NULL) { 338 for (int32_t i=0; i<=255; i++) { 339 if (s->contains(i)) { 340 this->add(i); 341 } 342 } 343 } 344} 345 346inline void Regex8BitSet::operator = (const Regex8BitSet &s) { 347 uprv_memcpy(d, s.d, sizeof(d)); 348} 349 350 351U_NAMESPACE_END 352#endif 353 354