1/* 2 * Copyright (C) 2010 NXP Semiconductors 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17/*! 18* \file phFriNfcNdefMap.c 19* \brief NFC Ndef Mapping For Different Smart Cards. 20* 21* Project: NFC-FRI 22* 23* $Date: Mon Dec 13 14:14:12 2010 $ 24* $Author: ing02260 $ 25* $Revision: 1.39 $ 26* $Aliases: $ 27* 28*/ 29 30 31#include <phFriNfc_NdefMap.h> 32 33#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 34#include <phFriNfc_MifareULMap.h> 35#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 36 37#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 38#include <phFriNfc_TopazMap.h> 39#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 40 41#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 42#include <phFriNfc_MifareStdMap.h> 43#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 44 45#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 46#include <phFriNfc_DesfireMap.h> 47#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 48 49#ifndef PH_FRINFC_MAP_FELICA_DISABLED 50#include <phFriNfc_FelicaMap.h> 51#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 52 53#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 54#include <phFriNfc_ISO15693Map.h> 55#endif /* PH_FRINFC_MAP_ISO15693_DISABLED */ 56 57#ifdef PHFRINFC_OVRHAL_MOCKUP 58#include <phFriNfc_MockupMap.h> 59#endif /* PHFRINFC_OVRHAL_MOCKUP */ 60 61 62#include <phFriNfc_OvrHal.h> 63 64/*! \ingroup grp_file_attributes 65* \name NDEF Mapping 66* 67* File: \ref phFriNfcNdefMap.c 68* 69*/ 70/*@{*/ 71#define PHFRINFCNDEFMAP_FILEREVISION "$Revision: 1.39 $" 72#define PHFRINFCNDEFMAP_FILEALIASES "$Aliases: $" 73/*@}*/ 74 75#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 76/* Desfire capability Container Reset Helper */ 77static void phFriNfc_DesfCapCont_HReset(phFriNfc_NdefMap_t *NdefMap); 78#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 79 80#ifndef PH_FRINFC_MAP_FELICA_DISABLED 81/* Felica Smart Tag Reset Helper */ 82static void phFriNfc_Felica_HReset(phFriNfc_NdefMap_t *NdefMap); 83#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 84 85 86/* \note This function has to be called at the beginning, after creating an 87* instance of \ref phFriNfc_NdefMap_t . Use this function to reset 88* the instance and/or switch to a different underlying device ( 89* different NFC device or device mode, or different Remote Device). 90*/ 91 92NFCSTATUS phFriNfc_NdefMap_Reset( phFriNfc_NdefMap_t *NdefMap, 93 void *LowerDevice, 94 phHal_sRemoteDevInformation_t *psRemoteDevInfo, 95 phHal_sDevInputParam_t *psDevInputParam, 96 uint8_t *TrxBuffer, 97 uint16_t TrxBufferSize, 98 uint8_t *ReceiveBuffer, 99 uint16_t *ReceiveLength, 100 uint16_t *DataCount) 101{ 102 NFCSTATUS status = NFCSTATUS_SUCCESS; 103 uint8_t index; 104 105 if ( (ReceiveLength == NULL) || (NdefMap == NULL) || (psRemoteDevInfo == NULL) || 106 (TrxBuffer == NULL) || (TrxBufferSize == 0) || (LowerDevice == NULL) || 107 (*ReceiveLength == 0) || (ReceiveBuffer == NULL) || (DataCount == NULL) || 108 (psDevInputParam == NULL) || 109 (*ReceiveLength < PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE )) 110 { 111 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 112 } 113 else 114 { 115 /* Initialise the state to Init */ 116 NdefMap->State = PH_FRINFC_NDEFMAP_STATE_RESET_INIT; 117 118 for(index = 0;index<PH_FRINFC_NDEFMAP_CR;index++) 119 { 120 /* Initialise the NdefMap Completion Routine to Null */ 121 NdefMap->CompletionRoutine[index].CompletionRoutine = NULL; 122 /* Initialise the NdefMap Completion Routine context to Null */ 123 NdefMap->CompletionRoutine[index].Context = NULL; 124 } 125 126 /* Lower Device(Always Overlapped HAL Struct initialised in application 127 is registred in NdefMap Lower Device) */ 128 NdefMap->LowerDevice = LowerDevice; 129 130 /* Remote Device info received from Manual Device Discovery is registered here */ 131 NdefMap->psRemoteDevInfo = psRemoteDevInfo; 132 133 /* Transfer Buffer registered */ 134 NdefMap->ApduBuffer = TrxBuffer; 135 136 /* Set the MaxApduBufferSize */ 137 NdefMap->ApduBufferSize = TrxBufferSize; 138 139 /* Set APDU Buffer Index */ 140 NdefMap->ApduBuffIndex = 0; 141 142 /* Register Transfer Buffer Length */ 143 NdefMap->SendLength = 0; 144 145 /* Register Receive Buffer */ 146 NdefMap->SendRecvBuf = ReceiveBuffer; 147 148 /* Register Receive Buffer Length */ 149 NdefMap->SendRecvLength = ReceiveLength; 150 151 /* Register Temporary Receive Buffer Length */ 152 NdefMap->TempReceiveLength = *ReceiveLength; 153 154 /* Register Data Count variable and set it to zero */ 155 NdefMap->DataCount = DataCount; 156 *NdefMap->DataCount = 0; 157 158 /* Reset the PageOffset */ 159 NdefMap->Offset = 0; 160 161 /* Reset the NumOfBytesRead*/ 162 NdefMap->NumOfBytesRead = 0; 163 164 /* Reset the NumOfBytesWritten*/ 165 NdefMap->NumOfBytesWritten = 0; 166 167 /* Reset the Card Type */ 168 NdefMap->CardType = 0; 169 170 /* Reset the Memory Card Size*/ 171 NdefMap->CardMemSize = 0; 172 173 /* Reset the Previous Operation*/ 174 NdefMap->PrevOperation = 0; 175 176 /* Reset the Desfire Operation Flag*/ 177 NdefMap->DespOpFlag = 0; 178 179 /* Reset MapCompletion Info*/ 180 NdefMap->MapCompletionInfo.CompletionRoutine = NULL; 181 NdefMap->MapCompletionInfo.Context = NULL; 182 183 /* Reset the ReadingForWriteOperation flag. */ 184 NdefMap->ReadingForWriteOperation = 0; /* FALSE */ 185 186#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 187 /*Reset Desfire Cap Container elements*/ 188 phFriNfc_DesfCapCont_HReset(NdefMap); 189#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 190 191#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 192 /*Reset Mifare Standard Container elements*/ 193 NdefMap->StdMifareContainer.DevInputParam = psDevInputParam; 194 status = phFriNfc_MifareStdMap_H_Reset(NdefMap); 195#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 196 197#ifndef PH_FRINFC_MAP_FELICA_DISABLED 198 /*Reset Felica Tag elements*/ 199 NdefMap->FelicaPollDetails.DevInputParam = psDevInputParam; 200 phFriNfc_Felica_HReset(NdefMap); 201#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 202 203#if !(defined(PH_FRINFC_MAP_TOPAZ_DISABLED ) || defined (PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED )) 204 205 phFriNfc_TopazMap_H_Reset(NdefMap); 206#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED || PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ 207 208 209#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 210 status = phFriNfc_MifareUL_H_Reset(NdefMap); 211#endif 212 213#ifdef PHFRINFC_OVRHAL_MOCKUP 214 /*Reset Desfire Cap Container elements*/ 215 phFriNfc_Mockup_H_Reset(NdefMap); 216#endif /* PHFRINFC_OVRHAL_MOCKUP */ 217 218 /* 219 * Fix for PR - 0001256 220 * Date- 08-08-08 221 */ 222 NdefMap->CardState = PH_NDEFMAP_CARD_STATE_INVALID; 223 } 224 225 return (status); 226} 227 228/*! 229* Registering the Completion Routine. 230* 231* This function requires the caller to set a Completion Routine 232* which serves as notifier for the upper component. 233* NOTE: Please refer the header file for more information. 234* 235*/ 236 237NFCSTATUS phFriNfc_NdefMap_SetCompletionRoutine(phFriNfc_NdefMap_t *NdefMap, 238 uint8_t FunctionID, 239 pphFriNfc_Cr_t CompletionRoutine, 240 void *CompletionRoutineContext) 241{ 242 NFCSTATUS status = NFCSTATUS_SUCCESS; 243 244 if ( ( NdefMap == NULL ) || (FunctionID >= PH_FRINFC_NDEFMAP_CR) || 245 ( CompletionRoutine == NULL) || (CompletionRoutineContext == NULL)) 246 { 247 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 248 } 249 else 250 { 251 /* Register the application callback with the NdefMap Completion Routine */ 252 NdefMap->CompletionRoutine[FunctionID].CompletionRoutine = CompletionRoutine; 253 254 /* Register the application context with the NdefMap Completion Routine context */ 255 NdefMap->CompletionRoutine[FunctionID].Context = CompletionRoutineContext; 256 } 257 258 return status; 259} 260 261/*! 262* Initiates Reading of NDEF information from the Remote Device. 263* 264* Remote Peer device may be of type any card. Ex: desfire,felica,jewel 265* mifareUL,mifare 1K etc. The function initiates the reading of NDEF 266* information from a Remote Device. 267* 268* This is the main NdefMap read function call.Internally,depending upon 269* the CardType,respective mifare/desfire read functions are called. 270* In future this can be extended to support any types of card. 271* 272* It performs a reset of the state and triggers/starts the raed action (state machine). 273* A periodic call of the \ref phFriNfcNdefMap_Process has to be done once the action 274* has been triggered. 275* 276* NOTE: Please refer the header file for more information. 277* 278*/ 279 280NFCSTATUS phFriNfc_NdefMap_RdNdef( phFriNfc_NdefMap_t *NdefMap, 281 uint8_t *PacketData, 282 uint32_t *PacketDataLength, 283 uint8_t Offset) 284{ 285 NFCSTATUS status = NFCSTATUS_PENDING; 286 287 288 /* check for validity of input parameters*/ 289 if (( PacketData == NULL ) 290 || ( NdefMap == NULL ) 291 || ( PacketDataLength == NULL ) 292 || ( *PacketDataLength == 0 ) 293 || ( ( Offset != PH_FRINFC_NDEFMAP_SEEK_CUR) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) 294 || (NdefMap->CompletionRoutine->CompletionRoutine == NULL) 295 || (NdefMap->CompletionRoutine->Context == NULL ) 296 ) 297 { 298 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 299 } 300 else if (NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) 301 { 302 /* Card is in invalid state, cannot have any read/write 303 operations*/ 304 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 305 NFCSTATUS_INVALID_FORMAT); 306 } 307 else if(NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INITIALIZED) 308 { 309 /* Can't read any data from the card:TLV length is zero*/ 310 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_EOF_NDEF_CONTAINER_REACHED); 311 312 NdefMap->NumOfBytesRead = PacketDataLength; 313 *NdefMap->NumOfBytesRead = 0; 314 315 316 } 317 else if ( (NdefMap->PrevOperation == PH_FRINFC_NDEFMAP_WRITE_OPE) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) 318 { 319 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); 320 } 321 else 322 { 323 /* Check the offset given by the user 324 If the offset is 1 (SEEK_BEGIN), reset everything and start 325 reading from the first Page of the card. 326 else if offset is 0 (PH_FRINFC_NDEFMAP_SEEK_CUR), continue reading 327 No need to reset the parameters. */ 328 329 if ( Offset == PH_FRINFC_NDEFMAP_SEEK_BEGIN ) 330 { 331 NdefMap->ApduBuffIndex = 0; 332 *NdefMap->DataCount = 0; 333 } 334 335 if ( (NdefMap->CardType == PH_FRINFC_NDEFMAP_ISO14443_4A_CARD) && 336 (Offset == PH_FRINFC_NDEFMAP_SEEK_CUR) && (*NdefMap->DataCount == 0 )) 337 { 338 339 /* A READ operation cannot be done if the previuos operation was WRITE 340 unless the offset is set to PH_FRINFC_NDEFMAP_SEEK_BEGIN Or 341 Read Operation with Offset set to Continue & DataCount set to 0 */ 342 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); 343 } 344 else 345 { 346 switch ( NdefMap->CardType) 347 { 348#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 349 case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : 350 /* Mifare card selected. Call Mifare read */ 351 status = phFriNfc_MifareUL_RdNdef ( NdefMap, 352 PacketData, 353 PacketDataLength, 354 Offset); 355 break; 356#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 357 358#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 359 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : 360#ifdef DESFIRE_EV1 361 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : 362#endif /* #ifdef DESFIRE_EV1 */ 363 /* Desfire card selected. Call Desfire read */ 364 status = phFriNfc_Desfire_RdNdef( NdefMap, 365 PacketData, 366 PacketDataLength, 367 Offset); 368 break; 369#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 370 371#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 372 case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : 373 case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : 374 /* Mifare card selected. Call Mifare read */ 375 status = phFriNfc_MifareStdMap_RdNdef ( NdefMap, 376 PacketData, 377 PacketDataLength, 378 Offset); 379 break; 380#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 381 382#ifndef PH_FRINFC_MAP_FELICA_DISABLED 383 case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : 384 /* Desfire card selected. Call Desfire Write */ 385 status = phFriNfc_Felica_RdNdef( NdefMap, 386 PacketData, 387 PacketDataLength, 388 Offset); 389 break; 390#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 391 392#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 393 case PH_FRINFC_NDEFMAP_TOPAZ_CARD : 394 /* Topaz card selected. Call Topaz read */ 395 status = phFriNfc_TopazMap_RdNdef( NdefMap, 396 PacketData, 397 PacketDataLength, 398 Offset); 399 break; 400#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 401 case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : 402 /* Topaz card selected. Call Topaz read */ 403 status = phFriNfc_TopazDynamicMap_RdNdef( NdefMap, 404 PacketData, 405 PacketDataLength, 406 Offset); 407 break; 408#endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ 409#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 410 411#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 412 case PH_FRINFC_NDEFMAP_ISO15693_CARD: 413 status = phFriNfc_ISO15693_RdNdef( NdefMap, 414 PacketData, 415 PacketDataLength, 416 Offset); 417 break; 418#endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 419 420#ifdef PHFRINFC_OVRHAL_MOCKUP 421 case PH_FRINFC_NDEFMAP_MOCKUP_CARD : 422 /* Mockup card selected. Call Mockup Write */ 423 status = phFriNfc_Mockup_RdNdef( NdefMap, 424 PacketData, 425 PacketDataLength, 426 Offset); 427 break; 428#endif /* PHFRINFC_OVRHAL_MOCKUP */ 429 430 default : 431 /* Unknown card type. Return error */ 432 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 433 NFCSTATUS_INVALID_REMOTE_DEVICE); 434 435 break; 436 } 437 } 438 } 439 return status; 440} 441 442/*! 443* Initiates Writing of NDEF information to the Remote Device. 444* 445* The function initiates the writing of NDEF information to a Remote Device 446* 447* Remote Peer device may be of type any card. Ex: desfire,felica,jewel 448* mifareUL,mifare 1K etc. The function initiates the reading of NDEF 449* information from a Remote Device. 450* 451* This is a main write api.Internally,depending upon the CardType, 452* respective mifare/desfire write apis are called.In future this can be 453* extended to support any types of card. 454* 455* It performs a reset of the state and starts the action (state machine). 456* A periodic call of the \ref phFriNfcNdefMap_Process has to be done once 457* the action has been triggered. 458* 459* NOTE: Please refer the header file for more information. 460* 461*/ 462 463 464NFCSTATUS phFriNfc_NdefMap_WrNdef( phFriNfc_NdefMap_t *NdefMap, 465 uint8_t *PacketData, 466 uint32_t *PacketDataLength, 467 uint8_t Offset) 468{ 469 NFCSTATUS status = NFCSTATUS_PENDING; 470 uint8_t StatusChk=0; 471 472 if ( (PacketData == NULL) 473 || ( NdefMap == NULL ) 474 /* + Mantis 442 */ 475 || ( PacketDataLength == NULL ) 476 /* - Mantis 442 */ 477 || ( *PacketDataLength == 0 ) 478 || ((Offset != PH_FRINFC_NDEFMAP_SEEK_CUR) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) 479 || (NdefMap->CompletionRoutine->CompletionRoutine == NULL) 480 || (NdefMap->CompletionRoutine->Context == NULL) 481 ) 482 { 483 /* Invalid input parameter error */ 484 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); 485 } 486 else if (( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) && 487 (PH_FRINFC_NDEFMAP_TOPAZ_CARD != NdefMap->CardType) && 488 (PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD != NdefMap->CardType)) 489 { 490 /* Card is in invalid state, cannot have any read/write 491 operations*/ 492 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 493 NFCSTATUS_INVALID_FORMAT); 494 } 495 496 else if ( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_READ_ONLY ) 497 498 { 499 /*Can't write to the card :No Grants */ 500 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 501 NFCSTATUS_NOT_ALLOWED); 502 503 /* set the no. bytes written is zero*/ 504 NdefMap->WrNdefPacketLength = PacketDataLength; 505 *NdefMap->WrNdefPacketLength = 0; 506 507 } 508 else 509 { 510 /* Check the offset given by the user 511 If the offset is 1 (SEEK_BEGIN), reset everything and start 512 writing from the first Byte of the card. 513 else if offset is 0 (PH_FRINFC_NDEFMAP_SEEK_CUR), continue writing 514 No need to reset the parameters. */ 515 if (( NdefMap->CardState == PH_NDEFMAP_CARD_STATE_INVALID) && 516 (PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD == NdefMap->CardType)) 517 { 518 /* If Topaz Dynamic card CC bytes are not valid then also allow writing, 519 If card is really good then writing will be done properly and reading can be performed, 520 otherwise writing or reading will fail. so, setting card state to 521 NdefMap->CardState = PH_NDEFMAP_CARD_STATE_READ_WRITE */ 522 NdefMap->CardState = PH_NDEFMAP_CARD_STATE_READ_WRITE; 523 } 524 525 if ( Offset == PH_FRINFC_NDEFMAP_SEEK_BEGIN ) 526 { 527 NdefMap->ApduBuffIndex = 0; 528 *NdefMap->DataCount = 0; 529 } 530 531 if ( (NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_UL_CARD) || 532 (NdefMap->CardType == PH_FRINFC_NDEFMAP_ISO14443_4A_CARD)) 533 { 534 if (( (NdefMap->PrevOperation == PH_FRINFC_NDEFMAP_READ_OPE) && (Offset != PH_FRINFC_NDEFMAP_SEEK_BEGIN )) || 535 ( (Offset == PH_FRINFC_NDEFMAP_SEEK_CUR) && (*NdefMap->DataCount == 0 ))) 536 { 537 /* A WRITE operation cannot be done if the previuos operation was READ 538 unless the offset is set to PH_FRINFC_NDEFMAP_SEEK_BEGIN OR 539 Write Operation with Offset set to Continue & DataCount set to 0 */ 540 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); 541 StatusChk = 1; 542 } 543 } 544 if(StatusChk != 1) 545 { 546 NdefMap->WrNdefPacketLength = PacketDataLength; 547 switch ( NdefMap->CardType) 548 { 549#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 550 case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : 551 /* Mifare card selected. Call Mifare Write */ 552 status = phFriNfc_MifareUL_WrNdef( NdefMap, 553 PacketData, 554 PacketDataLength, 555 Offset); 556 break; 557#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 558 559#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 560 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : 561#ifdef DESFIRE_EV1 562 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : 563#endif /* #ifdef DESFIRE_EV1 */ 564 /* Desfire card selected. Call Desfire Write */ 565 status = phFriNfc_Desfire_WrNdef( NdefMap, 566 PacketData, 567 PacketDataLength, 568 Offset); 569 break; 570#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 571 572#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 573 case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : 574 case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : 575 /* Mifare card selected. Call Mifare read */ 576 status = phFriNfc_MifareStdMap_WrNdef ( NdefMap, 577 PacketData, 578 PacketDataLength, 579 Offset); 580 break; 581#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 582 583#ifndef PH_FRINFC_MAP_FELICA_DISABLED 584 case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : 585 /* Desfire card selected. Call Desfire Write */ 586 status = phFriNfc_Felica_WrNdef( NdefMap, 587 PacketData, 588 PacketDataLength, 589 Offset); 590 break; 591#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 592 593#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 594 case PH_FRINFC_NDEFMAP_TOPAZ_CARD : 595 /* Topaz card selected. Call Topaz Write */ 596 status = phFriNfc_TopazMap_WrNdef( NdefMap, 597 PacketData, 598 PacketDataLength, 599 Offset); 600 break; 601#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 602 case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : 603 /* Topaz card selected. Call Topaz Write */ 604 status = phFriNfc_TopazDynamicMap_WrNdef( NdefMap, 605 PacketData, 606 PacketDataLength, 607 Offset); 608 break; 609#endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ 610#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 611 612#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 613 case PH_FRINFC_NDEFMAP_ISO15693_CARD: 614 status = phFriNfc_ISO15693_WrNdef( NdefMap, 615 PacketData, 616 PacketDataLength, 617 Offset); 618 break; 619#endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 620 621 622#ifdef PHFRINFC_OVRHAL_MOCKUP 623 case PH_FRINFC_NDEFMAP_MOCKUP_CARD : 624 /* Mockup card selected. Call Mockup Write */ 625 status = phFriNfc_Mockup_WrNdef( NdefMap, 626 PacketData, 627 PacketDataLength, 628 Offset); 629 break; 630#endif /* PHFRINFC_OVRHAL_MOCKUP */ 631 default : 632 /* Unknown card type. Return error */ 633 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 634 NFCSTATUS_INVALID_REMOTE_DEVICE); 635 break; 636 } 637 } 638 } 639 return status; 640} 641 642#ifdef FRINFC_READONLY_NDEF 643 644NFCSTATUS 645phFriNfc_NdefMap_ConvertToReadOnly ( 646 phFriNfc_NdefMap_t *NdefMap) 647{ 648 NFCSTATUS result = NFCSTATUS_PENDING; 649 650 651 /* Check for ndefmap context and relevant state. Else return error*/ 652 if (NULL == NdefMap) 653 { 654 result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 655 } 656 else if ((NdefMap->CompletionRoutine->CompletionRoutine == NULL) 657 || (NdefMap->CompletionRoutine->Context == NULL)) 658 { 659 result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 660 } 661 else 662 { 663 switch (NdefMap->CardType) 664 { 665 case PH_FRINFC_NDEFMAP_TOPAZ_CARD: 666 { 667 result = phFriNfc_TopazMap_ConvertToReadOnly (NdefMap); 668 break; 669 } 670 671 case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD: 672 { 673 result = phFriNfc_TopazDynamicMap_ConvertToReadOnly (NdefMap); 674 break; 675 } 676 677 case PH_FRINFC_NDEFMAP_ISO15693_CARD: 678 { 679 result = phFriNfc_ISO15693_ConvertToReadOnly (NdefMap); 680 break; 681 } 682 683 default: 684 { 685 result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 686 NFCSTATUS_INVALID_REMOTE_DEVICE); 687 break; 688 } 689 } 690 } 691 return result; 692} 693 694#endif /* #ifdef FRINFC_READONLY_NDEF */ 695 696/*! 697* Check whether a particular Remote Device is NDEF compliant. 698* 699* The function initiates the ndef compliancy check. 700* 701* This is a main check ndef api.Internally,depending upon the different 702* opmodes,respective mifare/desfire checkNdef apis are called. 703* In future this can be extended to check any types of card ndef 704* compliancy. 705* 706* It performs a reset of the state and starts the action (state machine). 707* A periodic call of the \ref phFriNfcNdefMap_Process has to be done once 708* the action has been triggered. 709* 710* NOTE: Please refer the header file for more information. 711* 712*/ 713 714NFCSTATUS phFriNfc_NdefMap_ChkNdef( phFriNfc_NdefMap_t *NdefMap) 715{ 716 NFCSTATUS status = NFCSTATUS_PENDING; 717 uint8_t sak; 718 719 720 /* Check for ndefmap context and relevant state. Else return error*/ 721 if ( NdefMap == NULL ) 722 { 723 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 724 } 725 else 726 { 727 if( (NdefMap->State != PH_FRINFC_NDEFMAP_STATE_RESET_INIT) || 728 (NdefMap->psRemoteDevInfo->SessionOpened != 0x01 ) ) 729 /* Harsha: If SessionOpened is not 1, this means that connect has not happened */ 730 { 731 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_DEVICE_REQUEST); 732 } 733 else if ( (NdefMap->CompletionRoutine->CompletionRoutine == NULL) || (NdefMap->CompletionRoutine->Context == NULL )) 734 { 735 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 736 } 737 else 738 { 739 /* 740 * 1.Changed 741 * CardInfo106 Replace with the ReaderA_Info. 742 */ 743 744 sak = NdefMap->psRemoteDevInfo->RemoteDevInfo.Iso14443A_Info.Sak; 745 746 /* 747 * 3. Changed 748 * Description: Opmode replace with RemDevType. 749 */ 750 751 752 switch ( NdefMap->psRemoteDevInfo->RemDevType ) 753 { 754#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 755 case phHal_eISO15693_PICC: 756 { 757 status = phFriNfc_ISO15693_ChkNdef (NdefMap); 758 break; 759 } 760#else /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 761 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 762 NFCSTATUS_INVALID_REMOTE_DEVICE); 763#endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 764 765 case phHal_eMifare_PICC: 766 case phHal_eISO14443_3A_PICC: 767 /* Remote device is Mifare card . Check for Mifare 768 NDEF compliancy */ 769 if(0x00 == sak) 770 { 771 /* The SAK/Sel_Res says the card is of the type 772 Mifare UL */ 773#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 774 status = phFriNfc_MifareUL_ChkNdef( NdefMap); 775#else /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 776 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 777 NFCSTATUS_INVALID_REMOTE_DEVICE); 778#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 779 } 780 else if ((0x08 == (sak & 0x18)) || 781 (0x18 == (sak & 0x18))) 782 { 783 /* The SAK/Sel_Res says the card is of the type 784 Mifare Standard */ 785#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 786 status = phFriNfc_MifareStdMap_ChkNdef( NdefMap); 787#else /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ 788 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 789 NFCSTATUS_INVALID_REMOTE_DEVICE); 790#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ 791 } 792 else 793 { 794 /* Invalid Mifare UL card, as the remote device 795 info - opmode says its a Mifare UL card but, 796 The SAK/Sel_Res is wrong */ 797 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 798 NFCSTATUS_INVALID_REMOTE_DEVICE); 799 } 800 break; 801 case phHal_eISO14443_B_PICC: 802 { 803 status = phFriNfc_Desfire_ChkNdef(NdefMap); 804 } 805 break; 806 case phHal_eISO14443_A_PICC : 807 /* Remote device is Desfire card . Check for Desfire 808 NDEF compliancy */ 809 if(0x20 == (sak & 0x20)) 810 { 811 /* The SAK/Sel_Res says the card is of the type 812 ISO14443_4A */ 813#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 814 status = phFriNfc_Desfire_ChkNdef(NdefMap); 815#else /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ 816 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 817 NFCSTATUS_INVALID_REMOTE_DEVICE); 818#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ 819 } 820 else 821 { 822 /* Invalid Desfire card, as the remote device 823 info - opmode says its a desfire card but, 824 The SAK/Sel_Res is wrong */ 825 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 826 NFCSTATUS_INVALID_REMOTE_DEVICE); 827 } 828 break; 829 830 case phHal_eFelica_PICC: 831 832 /*Set the OpMode Type Flag*/ 833#ifndef PH_FRINFC_MAP_FELICA_DISABLED 834#ifndef PH_HAL4_ENABLE 835 NdefMap->OpModeType[0] = phHal_eOpModesFelica212; 836 NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; 837#endif /* #ifndef PH_HAL4_ENABLE */ 838 status = phFriNfc_Felica_ChkNdef(NdefMap); 839#else /* PH_FRINFC_MAP_FELICA_DISABLED*/ 840 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 841 NFCSTATUS_INVALID_REMOTE_DEVICE); 842#endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ 843 844 break; 845 846#ifndef PH_HAL4_ENABLE 847#ifndef PH_FRINFC_MAP_FELICA_DISABLED 848 case phHal_eFelica424: 849 /*Set the OpMode Ttype Flag*/ 850 NdefMap->OpModeType[0] = phHal_eOpModesFelica424; 851 NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; 852 status = phFriNfc_Felica_ChkNdef(NdefMap); 853#else /* PH_FRINFC_MAP_FELICA_DISABLED*/ 854 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 855 NFCSTATUS_INVALID_REMOTE_DEVICE); 856#endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ 857 break; 858#endif 859 860 case phHal_eJewel_PICC : 861 /* Remote device is Topaz card . Check for Topaz 862 NDEF compliancy */ 863#ifdef PH_HAL4_ENABLE 864#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 865 /* Decide on the Header bytes to know the 866 Type of the Topaz card.Card could be Static or 867 Dynamic type. These are of type NFFC-NDEF Data Application*/ 868 if ( NdefMap->psRemoteDevInfo->RemoteDevInfo.Jewel_Info.HeaderRom0 869 == PH_FRINFC_TOPAZ_HEADROM0_VAL) 870 { 871 872 status = phFriNfc_TopazMap_ChkNdef(NdefMap); 873 } 874#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 875 else if( NdefMap->psRemoteDevInfo->RemoteDevInfo.Jewel_Info.HeaderRom0 876 == PH_FRINFC_TOPAZ_DYNAMIC_HEADROM0_VAL) 877 { 878 879 status = phFriNfc_TopazDynamicMap_ChkNdef(NdefMap); 880 } 881#endif 882 else 883 { 884 885 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 886 NFCSTATUS_INVALID_REMOTE_DEVICE); 887 888 } 889#endif 890 891 892#else 893 if(0xC2 == sak) 894 { 895 /* The SAK/Sel_Res says the card is of the type 896 ISO14443_4A */ 897#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 898 status = phFriNfc_TopazMap_ChkNdef(NdefMap); 899#else /* PH_FRINFC_MAP_TOPAZ_DISABLED*/ 900 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 901 NFCSTATUS_INVALID_REMOTE_DEVICE); 902#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED*/ 903 } 904 else 905 { 906 /* Invalid Topaz card, as the remote device 907 info - opmode says its a desfire card but, 908 The SAK/Sel_Res is wrong */ 909 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 910 NFCSTATUS_INVALID_REMOTE_DEVICE); 911 } 912#endif 913 break; 914 915#ifdef PHFRINFC_OVRHAL_MOCKUP 916 case phHal_eOpModesMockup : 917 /*Set the OpMode Ttype Flag*/ 918 NdefMap->OpModeType[0] = phHal_eOpModesMockup; 919 NdefMap->OpModeType[1] = phHal_eOpModesArrayTerminator; 920 status = phFriNfc_Mockup_ChkNdef(NdefMap); 921 break; 922#endif /* PHFRINFC_OVRHAL_MOCKUP */ 923 924 default : 925 /* Remote device is not recognised. 926 Probably not NDEF compliant */ 927 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 928 NFCSTATUS_INVALID_REMOTE_DEVICE); 929 break; 930 } 931 } 932 } 933 return status; 934} 935 936 937/*! 938* \brief Completion Routine, Processing function, needed to avoid long blocking. 939* \note The lower (Overlapped HAL) layer must register a pointer to this function as a Completion 940* Routine in order to be able to notify the component that an I/O has finished and data are 941* ready to be processed. 942* This is a main Ndef Map Process api.Internally,depending upon the different 943* CardTypes,respective mifare/desfire process functions are called. 944* 945*/ 946 947void phFriNfc_NdefMap_Process( void *Context, 948 NFCSTATUS Status) 949{ 950 951 if ( Context != NULL ) 952 { 953 phFriNfc_NdefMap_t *NdefMap = (phFriNfc_NdefMap_t *)Context; 954 /* 955 * 4 Changed 956 * Description: Opmode replace with RevDevTyp. 957 */ 958 959 switch ( NdefMap->psRemoteDevInfo->RemDevType ) 960 { 961 case phHal_eMifare_PICC : 962 case phHal_eISO14443_3A_PICC: 963 964 if((NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD) || 965 (NdefMap->CardType == PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD)) 966 { 967#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 968 /* Remote device is Mifare Standard card */ 969 phFriNfc_MifareStdMap_Process(NdefMap,Status); 970#else /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ 971 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 972 NFCSTATUS_INVALID_REMOTE_DEVICE); 973#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED*/ 974 } 975 else 976 { 977#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 978 /* Remote device is Mifare UL card */ 979 phFriNfc_MifareUL_Process(NdefMap,Status); 980#else /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 981 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 982 NFCSTATUS_INVALID_REMOTE_DEVICE); 983#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 984 } 985 break; 986 987 case phHal_eISO14443_A_PICC : 988#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 989 /* Remote device is Desfire card */ 990 phFriNfc_Desfire_Process(NdefMap, Status); 991#else /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ 992 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 993 NFCSTATUS_INVALID_REMOTE_DEVICE); 994#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED*/ 995 break; 996 case phHal_eISO14443_B_PICC: 997 /* Remote device is Desfire card */ 998 phFriNfc_Desfire_Process(NdefMap, Status); 999 break; 1000 1001 case phHal_eFelica_PICC : 1002#ifndef PH_FRINFC_MAP_FELICA_DISABLED 1003 /* Remote device is Felica Smart card */ 1004 phFriNfc_Felica_Process(NdefMap, Status); 1005#else /* PH_FRINFC_MAP_FELICA_DISABLED*/ 1006 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 1007 NFCSTATUS_INVALID_REMOTE_DEVICE); 1008#endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ 1009 break; 1010 1011 case phHal_eJewel_PICC: 1012#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 1013 if ( NdefMap->CardType == PH_FRINFC_NDEFMAP_TOPAZ_CARD ) 1014 { 1015 /* Remote device is Topaz Smart card */ 1016 phFriNfc_TopazMap_Process(NdefMap, Status); 1017 } 1018#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 1019 else if ( NdefMap->CardType == PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD ) 1020 { 1021 /* Remote device is Topaz Smart card */ 1022 phFriNfc_TopazDynamicMap_Process(NdefMap, Status); 1023 } 1024 else 1025 { 1026 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 1027 NFCSTATUS_INVALID_REMOTE_DEVICE); 1028 1029 } 1030 break; 1031#endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED*/ 1032#endif 1033 1034 1035#ifdef PHFRINFC_OVRHAL_MOCKUP 1036 case phHal_eOpModesMockup: 1037 /* Remote device is Desfire card */ 1038 phFriNfc_Mockup_Process(NdefMap, Status); 1039 break; 1040#endif /* PHFRINFC_OVRHAL_MOCKUP*/ 1041 default : 1042 /* Remote device opmode not recognised. 1043 Probably not NDEF compliant */ 1044 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 1045 NFCSTATUS_INVALID_REMOTE_DEVICE); 1046 /* set the state back to the Reset_Init state*/ 1047 NdefMap->State = PH_FRINFC_NDEFMAP_STATE_RESET_INIT; 1048 1049 /* set the completion routine*/ 1050 NdefMap->CompletionRoutine[PH_FRINFC_NDEFMAP_CR_INVALID_OPE]. 1051 CompletionRoutine(NdefMap->CompletionRoutine->Context, Status); 1052 break; 1053 } 1054 } 1055 else 1056 { 1057 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 1058 NFCSTATUS_INVALID_PARAMETER); 1059 /* The control should not come here. As Context itself is NULL , 1060 Can't call the CR*/ 1061 } 1062} 1063 1064#if 0 1065 1066NFCSTATUS phFriNfc_ChkAndParseTLV(phFriNfc_NdefMap_t *NdefMap) 1067{ 1068 NFCSTATUS status = NFCSTATUS_PENDING; 1069 1070 switch ( NdefMap->CardType ) 1071 { 1072#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 1073 case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : 1074 1075 1076 break; 1077#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 1078 1079#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 1080 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : 1081 status = phFriNfc_Desf_ChkAndParseTLV(NdefMap); 1082 return (status); 1083 1084 break; 1085#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 1086 1087#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 1088 case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : 1089 case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : 1090 1091 break; 1092#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 1093 1094#ifndef PH_FRINFC_MAP_FELICA_DISABLED 1095 case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : 1096 ; 1097 break; 1098#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 1099 1100 default : 1101 /* Unknown card type. Return error */ 1102 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 1103 NFCSTATUS_INVALID_REMOTE_DEVICE); 1104 1105 break; 1106 } 1107 1108 return ( status); 1109} 1110#endif 1111 1112 1113#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 1114static void phFriNfc_DesfCapCont_HReset(phFriNfc_NdefMap_t *NdefMap) 1115{ 1116 /* Initialise/reset the desfire capability contatiner structure variables*/ 1117 NdefMap->DesfireCapContainer.DesfVersion = 0; 1118 NdefMap->DesfireCapContainer.NdefMsgFid = 0; 1119 NdefMap->DesfireCapContainer.NdefFileSize = 0; 1120 NdefMap->DesfireCapContainer.MaxCmdSize = 0; 1121 NdefMap->DesfireCapContainer.MaxRespSize = 0; 1122 NdefMap->DesfireCapContainer.ReadAccess = 0; 1123 NdefMap->DesfireCapContainer.WriteAccess = 0; 1124} 1125#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 1126 1127#ifndef PH_FRINFC_MAP_FELICA_DISABLED 1128static void phFriNfc_Felica_HReset(phFriNfc_NdefMap_t *NdefMap) 1129{ 1130 uint8_t index=0; 1131 1132 /* Initialise/reset the different felica structure variables*/ 1133 /* Reset all the felica Basic staruture variables*/ 1134 NdefMap->Felica.CurBlockNo = 0; 1135 1136 for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE;index++) 1137 { 1138 NdefMap->Felica.Rd_BytesToCopyBuff[index] = 0; 1139 NdefMap->Felica.Wr_RemainedBytesBuff[index] = 0; 1140 } 1141 NdefMap->Felica.Rd_NoBytesToCopy = 0; 1142 NdefMap->Felica.Wr_BytesRemained = 0; 1143 1144 1145 /* Reset all the felica attribute information staruture variables*/ 1146 for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN;index++) 1147 { 1148 NdefMap->FelicaAttrInfo.LenBytes[index] = 0; 1149 } 1150 1151 NdefMap->FelicaAttrInfo.Nmaxb = 0; 1152 NdefMap->FelicaAttrInfo.Nbr = 0; 1153 NdefMap->FelicaAttrInfo.Nbw= 0; 1154 NdefMap->FelicaAttrInfo.RdWrFlag = 0; 1155 NdefMap->FelicaAttrInfo.WriteFlag = 0; 1156 NdefMap->Felica.CurrBytesRead=0; 1157 1158 /* Reset all the felica manufacture details staruture variables*/ 1159 for(index = 0;index<PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN;index++) 1160 { 1161 NdefMap->FelicaManufDetails.ManufID[index] = 0; 1162 NdefMap->FelicaManufDetails.ManufParameter[index] = 0; 1163 } 1164 NdefMap->Felica.NoBlocksWritten=0; 1165} 1166#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 1167 1168NFCSTATUS phFriNfc_NdefMap_EraseNdef(phFriNfc_NdefMap_t *NdefMap) 1169{ 1170 NFCSTATUS status = NFCSTATUS_PENDING; 1171 1172 static uint8_t PktData[3] = PH_FRINFC_NDEFMAP_EMPTY_NDEF_MSG; 1173 uint8_t MemOffset = PH_FRINFC_NDEFMAP_SEEK_BEGIN; 1174 uint32_t PacketDataLength = sizeof(PktData); 1175 1176 if (NdefMap == NULL ) 1177 { 1178 /* Invalid input parameter error */ 1179 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); 1180 } 1181 else 1182 { 1183 switch ( NdefMap->CardType) 1184 { 1185#ifdef PHFRINFC_OVRHAL_MOCKUP 1186 case PH_FRINFC_NDEFMAP_MOCKUP_CARD : 1187#endif /* PHFRINFC_OVRHAL_MOCKUP */ 1188 case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : 1189 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : 1190#ifdef DESFIRE_EV1 1191 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : 1192#endif /* #ifdef DESFIRE_EV1 */ 1193 case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : 1194 case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : 1195#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 1196 case PH_FRINFC_NDEFMAP_TOPAZ_CARD : 1197#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 1198 case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : 1199#endif 1200#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 1201 case PH_FRINFC_NDEFMAP_ISO15693_CARD: 1202#endif 1203#endif 1204 /* Mifare card selected. Call Mifare Write */ 1205 status = phFriNfc_NdefMap_WrNdef( NdefMap, 1206 PktData, 1207 &PacketDataLength, 1208 MemOffset); 1209 break; 1210 1211 case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : 1212 1213#ifndef PH_FRINFC_MAP_FELICA_DISABLED 1214 /* Felica card selected. Call to write EMPTY NDEF Msg */ 1215 status = phFriNfc_Felica_EraseNdef( NdefMap ); 1216#else /* PH_FRINFC_MAP_FELICA_DISABLED*/ 1217 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 1218 NFCSTATUS_INVALID_REMOTE_DEVICE); 1219#endif /* PH_FRINFC_MAP_FELICA_DISABLED*/ 1220 1221 break; 1222 default : 1223 /* Unknown card type. Return error */ 1224 status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, 1225 NFCSTATUS_INVALID_REMOTE_DEVICE); 1226 break; 1227 } 1228 } 1229 return status; 1230} 1231/* Harsha: Fix for the mantis entry 0000420: NDEF_MAP: Size of NDEF data: 1232no abstracted way for user to know how many bytes to read/write */ 1233 1234/*! 1235* \brief Helper API, exposed to the user to enable him to know the size 1236* of the NDEF data that he can write in to the card. 1237*/ 1238NFCSTATUS phFriNfc_NdefMap_GetContainerSize(const phFriNfc_NdefMap_t *NdefMap,uint32_t *maxSize, uint32_t *actualSize) 1239{ 1240 NFCSTATUS result = NFCSTATUS_SUCCESS; 1241 uint8_t sect_index = 0; 1242 uint8_t actual_sect_index = 0; 1243 uint8_t count_index = 0; 1244 1245 if( (NdefMap == NULL) || (maxSize == NULL) || (actualSize == NULL)) 1246 { 1247 /* Invalid input parameter error */ 1248 result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,NFCSTATUS_INVALID_PARAMETER); 1249 } 1250 else 1251 { 1252 /* Which card ? */ 1253 switch(NdefMap->CardType) 1254 { 1255#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 1256 case PH_FRINFC_NDEFMAP_MIFARE_UL_CARD : 1257 /* Mifare UL card */ 1258 /* The integration needs to ensure that the checkNdef 1259 function has been called before calling this function, 1260 otherwise NdefMap->CardMemSize will be 0 */ 1261 *maxSize = NdefMap->MifareULContainer.RemainingSize; 1262 /* In Mifare UL card, the actual size is the length field 1263 value of the TLV */ 1264 *actualSize = NdefMap->TLVStruct.ActualSize; 1265 break; 1266#endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 1267 1268#ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 1269 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD : 1270#ifdef DESFIRE_EV1 1271 case PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 : 1272#endif /* #ifdef DESFIRE_EV1 */ 1273 /* Desfire card */ 1274 /* The integration needs to ensure that the checkNdef 1275 function has been called before calling this function, 1276 otherwise NdefMap->DesfireCapContainer.NdefFileSize 1277 will be 0 */ 1278 /* -2 bytes represents the size field bytes*/ 1279 *maxSize = NdefMap->DesfireCapContainer.NdefFileSize - 2; 1280 /* In Desfire card, the actual size cant be calculated so 1281 the actual size is given as 0xFFFFFFFF */ 1282 *actualSize = NdefMap->DesfireCapContainer.NdefDataLen; 1283 break; 1284#endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 1285 1286#ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 1287 case PH_FRINFC_NDEFMAP_TOPAZ_CARD : 1288 /* Topaz card */ 1289 /* The integration needs to ensure that the checkNdef 1290 function has been called before calling this function, 1291 otherwise NdefMap->CardMemSize will be 0 */ 1292 *maxSize = NdefMap->TopazContainer.RemainingSize; 1293 /* In Topaz card, the actual size is the length field value of the 1294 TLV */ 1295 *actualSize = NdefMap->TLVStruct.BytesRemainLinTLV; 1296 break; 1297#ifndef PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED 1298 case PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD : 1299 /* Topaz 512 card */ 1300 /* The integration needs to ensure that the checkNdef 1301 function has been called before calling this function, 1302 otherwise NdefMap->CardMemSize will be 0 */ 1303 *maxSize = NdefMap->TopazContainer.NDEFRWSize; 1304 /* In Topaz card, the actual size is the length field value of the 1305 TLV */ 1306 *actualSize = NdefMap->TopazContainer.ActualNDEFMsgSize; 1307 break; 1308 1309#endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 1310#endif /* PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED */ 1311#ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 1312 case PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD : 1313 case PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD : 1314 /* Mifare std card */ 1315 1316 /* Max size is the number of NDEF compliant blocks in the card 1317 multiplied by 16 bytes */ 1318#ifndef PH_HAL4_ENABLE 1319 1320 *maxSize = NdefMap->StdMifareContainer.remainingSize; 1321 1322#else /* #ifndef PH_HAL4_ENABLE */ 1323 1324 while ((PH_FRINFC_MIFARESTD_NDEF_COMP == 1325 NdefMap->StdMifareContainer.aid[count_index]) && 1326 (count_index < 1327 PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK)) 1328 { 1329 actual_sect_index++; 1330 count_index++; 1331 } 1332 /* Total number of sectors in 1k = 16 (0 to 15, MAD sector number = 0) 1333 Total number of sectors in 4k = 40 (0 to 39, 1334 MAD sector number = 0 and 16, After block number 31, each sector 1335 has 16 blocks) 1336 Every last block of the sector is the sector header, So the blocks 1337 that can be read or written in each sector is always 1338 (number of blocks in each sector - 1) 1339 No of blocks in the one sector till the sector number 0 to 31 1340 (total 32 sectors) = 1341 4 blocks, So blocks that can be read/write = (4 - 1 = 3 blocks) 1342 No of blocks in the one sector after the sector number 31 to 39 = 1343 16 blocks, So blocks that can be read/write = (16 - 1 = 15 blocks) 1344 Each block has 16 bytes 1345 To calculate number of bytes in the sector, depending on the number 1346 of blocks multiplied by 16 1347 */ 1348 if (PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD == 1349 NdefMap->CardType) 1350 { 1351 if (actual_sect_index > 32) 1352 { 1353 sect_index = (actual_sect_index - 32); 1354 /* Here, 30 is used because block number 0 and 16 are MAD blocks 1355 which cannot be used for reading and writing data 1356 3 and 15 are blocks in each sector which can be read/write 1357 3 indicates the sector is in between (0 and 31) 1358 15 indicates the sector is in between (32 to 39) 1359 16 is always number of bytes in each block 1360 4 is used because each NDEF write has to write using the 1361 TLV format and T & L takes 4 bytes length and V is the 1362 input data 1363 */ 1364 *maxSize = (((30 * (16 * 3)) + (sect_index * (16 * 15))) - 4); 1365 } 1366 else if (actual_sect_index <= 16) 1367 { 1368 *maxSize = (((actual_sect_index - 1) * (16 * 3)) - 4); 1369 } 1370 else 1371 { 1372 *maxSize = (((actual_sect_index - 2) * (16 * 3)) - 4); 1373 } 1374 } 1375 else 1376 { 1377 /* Here, 16 is always number of bytes in each block 1378 3 indicates the sector is in between (0 and 31) */ 1379 if (actual_sect_index > NdefMap->StdMifareContainer.SectorIndex) 1380 { 1381 actual_sect_index = NdefMap->StdMifareContainer.SectorIndex; 1382 } 1383 *maxSize = (((actual_sect_index - 1) * (16 * 3)) - 4); 1384 } 1385 1386#endif /* #ifndef PH_HAL4_ENABLE */ 1387 *actualSize = NdefMap->TLVStruct.BytesRemainLinTLV; 1388 1389 break; 1390#endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 1391 1392#ifndef PH_FRINFC_MAP_FELICA_DISABLED 1393 case PH_FRINFC_NDEFMAP_FELICA_SMART_CARD : 1394 /* Felica card */ 1395 1396 *maxSize = NdefMap->FelicaAttrInfo.Nmaxb * 0x10; 1397 1398 /* In Felica Card, actual size is calculated using the Length Bytes */ 1399 *actualSize = NdefMap->FelicaAttrInfo.LenBytes[0]; 1400 *actualSize = *actualSize << 16; 1401 *actualSize += NdefMap->FelicaAttrInfo.LenBytes[1]; 1402 *actualSize = *actualSize << 8; 1403 *actualSize += NdefMap->FelicaAttrInfo.LenBytes[2]; 1404 break; 1405#endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 1406 1407#ifndef PH_FRINFC_MAP_ISO15693_DISABLED 1408 case PH_FRINFC_NDEFMAP_ISO15693_CARD: 1409 { 1410#if 1 1411 uint16_t block_no = 0; 1412 uint8_t byte_no = 0; 1413 1414 block_no = (uint16_t) 1415 ISO15693_GET_VALUE_FIELD_BLOCK_NO ( 1416 NdefMap->ISO15693Container.ndef_tlv_type_blk, 1417 NdefMap->ISO15693Container.ndef_tlv_type_byte, 1418 NdefMap->ISO15693Container.actual_ndef_size); 1419 byte_no = (uint8_t) 1420 ISO15693_GET_VALUE_FIELD_BYTE_NO ( 1421 NdefMap->ISO15693Container.ndef_tlv_type_blk, 1422 NdefMap->ISO15693Container.ndef_tlv_type_byte, 1423 NdefMap->ISO15693Container.actual_ndef_size); 1424 1425 *maxSize = (NdefMap->ISO15693Container.max_data_size - 1426 ((block_no * ISO15693_BYTES_PER_BLOCK) + byte_no)); 1427#else /* #if 1 */ 1428 /* 2 is used to exclude the T and L part of the TLV */ 1429 *maxSize = (NdefMap->ISO15693Container.max_data_size 1430 - ISO15693_BYTES_PER_BLOCK - 2); 1431#endif /* #if 1 */ 1432 *actualSize = NdefMap->ISO15693Container.actual_ndef_size; 1433 break; 1434 } 1435#endif 1436 1437#ifdef PHFRINFC_OVRHAL_MOCKUP 1438 case PH_FRINFC_NDEFMAP_MOCKUP_CARD : 1439 *maxSize = 0xFFFFFFFF; 1440 /* In Desfire card, the actual size cant be calculated so 1441 the actual size is given as 0xFFFFFFFF */ 1442 *actualSize = 0xFFFFFFFF; 1443 break; 1444#endif /* PHFRINFC_OVRHAL_MOCKUP */ 1445 1446 default : 1447 /* Unknown card type. Return error */ 1448 result = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP,\ 1449 NFCSTATUS_INVALID_REMOTE_DEVICE); 1450 break; 1451 } 1452 } 1453 return(result); 1454} 1455 1456#ifdef PHFRINFC_OVRHAL_MOCKUP 1457NFCSTATUS phFriNfc_NdefMap_MockupCardSetter(phFriNfc_NdefMap_t *NdefMap, 1458 uint8_t *NdefData, 1459 uint32_t NdefActualSize, 1460 uint32_t NdefMaxSize, 1461 uint32_t CardSize) 1462{ 1463 NFCSTATUS Status = NFCSTATUS_SUCCESS; 1464 // First check all parameters 1465 if((NdefData != NULL) && (NdefMap != NULL)) 1466 { 1467 // OK we can set 1468 NdefMap->MochupContainer.NdefData = NdefData; 1469 NdefMap->MochupContainer.NdefActualSize = NdefActualSize; 1470 NdefMap->MochupContainer.NdefMaxSize = NdefMaxSize; 1471 NdefMap->MochupContainer.CardSize = CardSize; 1472 NdefMap->MochupContainer.CurrentBlock = 0; 1473 1474 } else 1475 { 1476 Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_MAP, NFCSTATUS_INVALID_PARAMETER); 1477 } 1478 return Status; 1479} 1480 1481NFCSTATUS phFriNfc_NdefMap_MockupNDefModeEn(uint8_t *pNdefCompliancy, uint8_t *pCardType, uint8_t Enable) 1482{ 1483 *pNdefCompliancy = Enable; 1484 *pCardType = PH_FRINFC_NDEFMAP_MOCKUP_CARD; 1485 return NFCSTATUS_SUCCESS; 1486} 1487#endif /* PHFRINFC_OVRHAL_MOCKUP */ 1488 1489 1490 1491 1492 1493 1494 1495 1496