1/* 2 * WPA Supplicant - test code 3 * Copyright (c) 2003-2007, Jouni Malinen <j@w1.fi> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License version 2 as 7 * published by the Free Software Foundation. 8 * 9 * Alternatively, this software may be distributed under the terms of BSD 10 * license. 11 * 12 * See README and COPYING for more details. 13 * 14 * IEEE 802.1X Supplicant test code (to be used in place of wpa_supplicant.c. 15 * Not used in production version. 16 */ 17 18#include "includes.h" 19#include <assert.h> 20 21#include "common.h" 22#include "config.h" 23#include "eapol_supp/eapol_supp_sm.h" 24#include "eap_peer/eap.h" 25#include "eloop.h" 26#include "wpa.h" 27#include "eap_peer/eap_i.h" 28#include "wpa_supplicant_i.h" 29#include "radius/radius.h" 30#include "radius/radius_client.h" 31#include "ctrl_iface.h" 32#include "pcsc_funcs.h" 33 34 35extern int wpa_debug_level; 36extern int wpa_debug_show_keys; 37 38struct wpa_driver_ops *wpa_supplicant_drivers[] = { NULL }; 39 40 41struct extra_radius_attr { 42 u8 type; 43 char syntax; 44 char *data; 45 struct extra_radius_attr *next; 46}; 47 48struct eapol_test_data { 49 struct wpa_supplicant *wpa_s; 50 51 int eapol_test_num_reauths; 52 int no_mppe_keys; 53 int num_mppe_ok, num_mppe_mismatch; 54 55 u8 radius_identifier; 56 struct radius_msg *last_recv_radius; 57 struct in_addr own_ip_addr; 58 struct radius_client_data *radius; 59 struct hostapd_radius_servers *radius_conf; 60 61 u8 *last_eap_radius; /* last received EAP Response from Authentication 62 * Server */ 63 size_t last_eap_radius_len; 64 65 u8 authenticator_pmk[PMK_LEN]; 66 size_t authenticator_pmk_len; 67 int radius_access_accept_received; 68 int radius_access_reject_received; 69 int auth_timed_out; 70 71 u8 *eap_identity; 72 size_t eap_identity_len; 73 74 char *connect_info; 75 u8 own_addr[ETH_ALEN]; 76 struct extra_radius_attr *extra_attrs; 77}; 78 79static struct eapol_test_data eapol_test; 80 81 82static void send_eap_request_identity(void *eloop_ctx, void *timeout_ctx); 83 84 85static void hostapd_logger_cb(void *ctx, const u8 *addr, unsigned int module, 86 int level, const char *txt, size_t len) 87{ 88 if (addr) 89 wpa_printf(MSG_DEBUG, "STA " MACSTR ": %s\n", 90 MAC2STR(addr), txt); 91 else 92 wpa_printf(MSG_DEBUG, "%s", txt); 93} 94 95 96static int add_extra_attr(struct radius_msg *msg, 97 struct extra_radius_attr *attr) 98{ 99 size_t len; 100 char *pos; 101 u32 val; 102 char buf[128]; 103 104 switch (attr->syntax) { 105 case 's': 106 os_snprintf(buf, sizeof(buf), "%s", attr->data); 107 len = os_strlen(buf); 108 break; 109 case 'n': 110 buf[0] = '\0'; 111 len = 1; 112 break; 113 case 'x': 114 pos = attr->data; 115 if (pos[0] == '0' && pos[1] == 'x') 116 pos += 2; 117 len = os_strlen(pos); 118 if ((len & 1) || (len / 2) > sizeof(buf)) { 119 printf("Invalid extra attribute hexstring\n"); 120 return -1; 121 } 122 len /= 2; 123 if (hexstr2bin(pos, (u8 *) buf, len) < 0) { 124 printf("Invalid extra attribute hexstring\n"); 125 return -1; 126 } 127 break; 128 case 'd': 129 val = htonl(atoi(attr->data)); 130 os_memcpy(buf, &val, 4); 131 len = 4; 132 break; 133 default: 134 printf("Incorrect extra attribute syntax specification\n"); 135 return -1; 136 } 137 138 if (!radius_msg_add_attr(msg, attr->type, (u8 *) buf, len)) { 139 printf("Could not add attribute %d\n", attr->type); 140 return -1; 141 } 142 143 return 0; 144} 145 146 147static int add_extra_attrs(struct radius_msg *msg, 148 struct extra_radius_attr *attrs) 149{ 150 struct extra_radius_attr *p; 151 for (p = attrs; p; p = p->next) { 152 if (add_extra_attr(msg, p) < 0) 153 return -1; 154 } 155 return 0; 156} 157 158 159static struct extra_radius_attr * 160find_extra_attr(struct extra_radius_attr *attrs, u8 type) 161{ 162 struct extra_radius_attr *p; 163 for (p = attrs; p; p = p->next) { 164 if (p->type == type) 165 return p; 166 } 167 return NULL; 168} 169 170 171static void ieee802_1x_encapsulate_radius(struct eapol_test_data *e, 172 const u8 *eap, size_t len) 173{ 174 struct radius_msg *msg; 175 char buf[128]; 176 const struct eap_hdr *hdr; 177 const u8 *pos; 178 179 wpa_printf(MSG_DEBUG, "Encapsulating EAP message into a RADIUS " 180 "packet"); 181 182 e->radius_identifier = radius_client_get_id(e->radius); 183 msg = radius_msg_new(RADIUS_CODE_ACCESS_REQUEST, 184 e->radius_identifier); 185 if (msg == NULL) { 186 printf("Could not create net RADIUS packet\n"); 187 return; 188 } 189 190 radius_msg_make_authenticator(msg, (u8 *) e, sizeof(*e)); 191 192 hdr = (const struct eap_hdr *) eap; 193 pos = (const u8 *) (hdr + 1); 194 if (len > sizeof(*hdr) && hdr->code == EAP_CODE_RESPONSE && 195 pos[0] == EAP_TYPE_IDENTITY) { 196 pos++; 197 os_free(e->eap_identity); 198 e->eap_identity_len = len - sizeof(*hdr) - 1; 199 e->eap_identity = os_malloc(e->eap_identity_len); 200 if (e->eap_identity) { 201 os_memcpy(e->eap_identity, pos, e->eap_identity_len); 202 wpa_hexdump(MSG_DEBUG, "Learned identity from " 203 "EAP-Response-Identity", 204 e->eap_identity, e->eap_identity_len); 205 } 206 } 207 208 if (e->eap_identity && 209 !radius_msg_add_attr(msg, RADIUS_ATTR_USER_NAME, 210 e->eap_identity, e->eap_identity_len)) { 211 printf("Could not add User-Name\n"); 212 goto fail; 213 } 214 215 if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_IP_ADDRESS) && 216 !radius_msg_add_attr(msg, RADIUS_ATTR_NAS_IP_ADDRESS, 217 (u8 *) &e->own_ip_addr, 4)) { 218 printf("Could not add NAS-IP-Address\n"); 219 goto fail; 220 } 221 222 os_snprintf(buf, sizeof(buf), RADIUS_802_1X_ADDR_FORMAT, 223 MAC2STR(e->wpa_s->own_addr)); 224 if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CALLING_STATION_ID) 225 && 226 !radius_msg_add_attr(msg, RADIUS_ATTR_CALLING_STATION_ID, 227 (u8 *) buf, os_strlen(buf))) { 228 printf("Could not add Calling-Station-Id\n"); 229 goto fail; 230 } 231 232 /* TODO: should probably check MTU from driver config; 2304 is max for 233 * IEEE 802.11, but use 1400 to avoid problems with too large packets 234 */ 235 if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_FRAMED_MTU) && 236 !radius_msg_add_attr_int32(msg, RADIUS_ATTR_FRAMED_MTU, 1400)) { 237 printf("Could not add Framed-MTU\n"); 238 goto fail; 239 } 240 241 if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_NAS_PORT_TYPE) && 242 !radius_msg_add_attr_int32(msg, RADIUS_ATTR_NAS_PORT_TYPE, 243 RADIUS_NAS_PORT_TYPE_IEEE_802_11)) { 244 printf("Could not add NAS-Port-Type\n"); 245 goto fail; 246 } 247 248 os_snprintf(buf, sizeof(buf), "%s", e->connect_info); 249 if (!find_extra_attr(e->extra_attrs, RADIUS_ATTR_CONNECT_INFO) && 250 !radius_msg_add_attr(msg, RADIUS_ATTR_CONNECT_INFO, 251 (u8 *) buf, os_strlen(buf))) { 252 printf("Could not add Connect-Info\n"); 253 goto fail; 254 } 255 256 if (add_extra_attrs(msg, e->extra_attrs) < 0) 257 goto fail; 258 259 if (eap && !radius_msg_add_eap(msg, eap, len)) { 260 printf("Could not add EAP-Message\n"); 261 goto fail; 262 } 263 264 /* State attribute must be copied if and only if this packet is 265 * Access-Request reply to the previous Access-Challenge */ 266 if (e->last_recv_radius && e->last_recv_radius->hdr->code == 267 RADIUS_CODE_ACCESS_CHALLENGE) { 268 int res = radius_msg_copy_attr(msg, e->last_recv_radius, 269 RADIUS_ATTR_STATE); 270 if (res < 0) { 271 printf("Could not copy State attribute from previous " 272 "Access-Challenge\n"); 273 goto fail; 274 } 275 if (res > 0) { 276 wpa_printf(MSG_DEBUG, " Copied RADIUS State " 277 "Attribute"); 278 } 279 } 280 281 radius_client_send(e->radius, msg, RADIUS_AUTH, e->wpa_s->own_addr); 282 return; 283 284 fail: 285 radius_msg_free(msg); 286 os_free(msg); 287} 288 289 290static int eapol_test_eapol_send(void *ctx, int type, const u8 *buf, 291 size_t len) 292{ 293 /* struct wpa_supplicant *wpa_s = ctx; */ 294 printf("WPA: eapol_test_eapol_send(type=%d len=%lu)\n", 295 type, (unsigned long) len); 296 if (type == IEEE802_1X_TYPE_EAP_PACKET) { 297 wpa_hexdump(MSG_DEBUG, "TX EAP -> RADIUS", buf, len); 298 ieee802_1x_encapsulate_radius(&eapol_test, buf, len); 299 } 300 return 0; 301} 302 303 304static void eapol_test_set_config_blob(void *ctx, 305 struct wpa_config_blob *blob) 306{ 307 struct wpa_supplicant *wpa_s = ctx; 308 wpa_config_set_blob(wpa_s->conf, blob); 309} 310 311 312static const struct wpa_config_blob * 313eapol_test_get_config_blob(void *ctx, const char *name) 314{ 315 struct wpa_supplicant *wpa_s = ctx; 316 return wpa_config_get_blob(wpa_s->conf, name); 317} 318 319 320static void eapol_test_eapol_done_cb(void *ctx) 321{ 322 printf("WPA: EAPOL processing complete\n"); 323} 324 325 326static void eapol_sm_reauth(void *eloop_ctx, void *timeout_ctx) 327{ 328 struct eapol_test_data *e = eloop_ctx; 329 printf("\n\n\n\n\neapol_test: Triggering EAP reauthentication\n\n"); 330 e->radius_access_accept_received = 0; 331 send_eap_request_identity(e->wpa_s, NULL); 332} 333 334 335static int eapol_test_compare_pmk(struct eapol_test_data *e) 336{ 337 u8 pmk[PMK_LEN]; 338 int ret = 1; 339 340 if (eapol_sm_get_key(e->wpa_s->eapol, pmk, PMK_LEN) == 0) { 341 wpa_hexdump(MSG_DEBUG, "PMK from EAPOL", pmk, PMK_LEN); 342 if (os_memcmp(pmk, e->authenticator_pmk, PMK_LEN) != 0) { 343 printf("WARNING: PMK mismatch\n"); 344 wpa_hexdump(MSG_DEBUG, "PMK from AS", 345 e->authenticator_pmk, PMK_LEN); 346 } else if (e->radius_access_accept_received) 347 ret = 0; 348 } else if (e->authenticator_pmk_len == 16 && 349 eapol_sm_get_key(e->wpa_s->eapol, pmk, 16) == 0) { 350 wpa_hexdump(MSG_DEBUG, "LEAP PMK from EAPOL", pmk, 16); 351 if (os_memcmp(pmk, e->authenticator_pmk, 16) != 0) { 352 printf("WARNING: PMK mismatch\n"); 353 wpa_hexdump(MSG_DEBUG, "PMK from AS", 354 e->authenticator_pmk, 16); 355 } else if (e->radius_access_accept_received) 356 ret = 0; 357 } else if (e->radius_access_accept_received && e->no_mppe_keys) { 358 /* No keying material expected */ 359 ret = 0; 360 } 361 362 if (ret && !e->no_mppe_keys) 363 e->num_mppe_mismatch++; 364 else if (!e->no_mppe_keys) 365 e->num_mppe_ok++; 366 367 return ret; 368} 369 370 371static void eapol_sm_cb(struct eapol_sm *eapol, int success, void *ctx) 372{ 373 struct eapol_test_data *e = ctx; 374 printf("eapol_sm_cb: success=%d\n", success); 375 e->eapol_test_num_reauths--; 376 if (e->eapol_test_num_reauths < 0) 377 eloop_terminate(); 378 else { 379 eapol_test_compare_pmk(e); 380 eloop_register_timeout(0, 100000, eapol_sm_reauth, e, NULL); 381 } 382} 383 384 385static int test_eapol(struct eapol_test_data *e, struct wpa_supplicant *wpa_s, 386 struct wpa_ssid *ssid) 387{ 388 struct eapol_config eapol_conf; 389 struct eapol_ctx *ctx; 390 391 ctx = os_zalloc(sizeof(*ctx)); 392 if (ctx == NULL) { 393 printf("Failed to allocate EAPOL context.\n"); 394 return -1; 395 } 396 ctx->ctx = wpa_s; 397 ctx->msg_ctx = wpa_s; 398 ctx->scard_ctx = wpa_s->scard; 399 ctx->cb = eapol_sm_cb; 400 ctx->cb_ctx = e; 401 ctx->eapol_send_ctx = wpa_s; 402 ctx->preauth = 0; 403 ctx->eapol_done_cb = eapol_test_eapol_done_cb; 404 ctx->eapol_send = eapol_test_eapol_send; 405 ctx->set_config_blob = eapol_test_set_config_blob; 406 ctx->get_config_blob = eapol_test_get_config_blob; 407#ifdef EAP_TLS_OPENSSL 408 ctx->opensc_engine_path = wpa_s->conf->opensc_engine_path; 409 ctx->pkcs11_engine_path = wpa_s->conf->pkcs11_engine_path; 410 ctx->pkcs11_module_path = wpa_s->conf->pkcs11_module_path; 411#endif /* EAP_TLS_OPENSSL */ 412 413 wpa_s->eapol = eapol_sm_init(ctx); 414 if (wpa_s->eapol == NULL) { 415 os_free(ctx); 416 printf("Failed to initialize EAPOL state machines.\n"); 417 return -1; 418 } 419 420 wpa_s->current_ssid = ssid; 421 os_memset(&eapol_conf, 0, sizeof(eapol_conf)); 422 eapol_conf.accept_802_1x_keys = 1; 423 eapol_conf.required_keys = 0; 424 eapol_conf.fast_reauth = wpa_s->conf->fast_reauth; 425 eapol_conf.workaround = ssid->eap_workaround; 426 eapol_sm_notify_config(wpa_s->eapol, &ssid->eap, &eapol_conf); 427 eapol_sm_register_scard_ctx(wpa_s->eapol, wpa_s->scard); 428 429 430 eapol_sm_notify_portValid(wpa_s->eapol, FALSE); 431 /* 802.1X::portControl = Auto */ 432 eapol_sm_notify_portEnabled(wpa_s->eapol, TRUE); 433 434 return 0; 435} 436 437 438static void test_eapol_clean(struct eapol_test_data *e, 439 struct wpa_supplicant *wpa_s) 440{ 441 struct extra_radius_attr *p, *prev; 442 443 radius_client_deinit(e->radius); 444 os_free(e->last_eap_radius); 445 if (e->last_recv_radius) { 446 radius_msg_free(e->last_recv_radius); 447 os_free(e->last_recv_radius); 448 } 449 os_free(e->eap_identity); 450 e->eap_identity = NULL; 451 eapol_sm_deinit(wpa_s->eapol); 452 wpa_s->eapol = NULL; 453 if (e->radius_conf && e->radius_conf->auth_server) { 454 os_free(e->radius_conf->auth_server->shared_secret); 455 os_free(e->radius_conf->auth_server); 456 } 457 os_free(e->radius_conf); 458 e->radius_conf = NULL; 459 scard_deinit(wpa_s->scard); 460 if (wpa_s->ctrl_iface) { 461 wpa_supplicant_ctrl_iface_deinit(wpa_s->ctrl_iface); 462 wpa_s->ctrl_iface = NULL; 463 } 464 wpa_config_free(wpa_s->conf); 465 466 p = e->extra_attrs; 467 while (p) { 468 prev = p; 469 p = p->next; 470 os_free(prev); 471 } 472} 473 474 475static void send_eap_request_identity(void *eloop_ctx, void *timeout_ctx) 476{ 477 struct wpa_supplicant *wpa_s = eloop_ctx; 478 u8 buf[100], *pos; 479 struct ieee802_1x_hdr *hdr; 480 struct eap_hdr *eap; 481 482 hdr = (struct ieee802_1x_hdr *) buf; 483 hdr->version = EAPOL_VERSION; 484 hdr->type = IEEE802_1X_TYPE_EAP_PACKET; 485 hdr->length = htons(5); 486 487 eap = (struct eap_hdr *) (hdr + 1); 488 eap->code = EAP_CODE_REQUEST; 489 eap->identifier = 0; 490 eap->length = htons(5); 491 pos = (u8 *) (eap + 1); 492 *pos = EAP_TYPE_IDENTITY; 493 494 printf("Sending fake EAP-Request-Identity\n"); 495 eapol_sm_rx_eapol(wpa_s->eapol, wpa_s->bssid, buf, 496 sizeof(*hdr) + 5); 497} 498 499 500static void eapol_test_timeout(void *eloop_ctx, void *timeout_ctx) 501{ 502 struct eapol_test_data *e = eloop_ctx; 503 printf("EAPOL test timed out\n"); 504 e->auth_timed_out = 1; 505 eloop_terminate(); 506} 507 508 509static char *eap_type_text(u8 type) 510{ 511 switch (type) { 512 case EAP_TYPE_IDENTITY: return "Identity"; 513 case EAP_TYPE_NOTIFICATION: return "Notification"; 514 case EAP_TYPE_NAK: return "Nak"; 515 case EAP_TYPE_TLS: return "TLS"; 516 case EAP_TYPE_TTLS: return "TTLS"; 517 case EAP_TYPE_PEAP: return "PEAP"; 518 case EAP_TYPE_SIM: return "SIM"; 519 case EAP_TYPE_GTC: return "GTC"; 520 case EAP_TYPE_MD5: return "MD5"; 521 case EAP_TYPE_OTP: return "OTP"; 522 case EAP_TYPE_FAST: return "FAST"; 523 case EAP_TYPE_SAKE: return "SAKE"; 524 case EAP_TYPE_PSK: return "PSK"; 525 default: return "Unknown"; 526 } 527} 528 529 530static void ieee802_1x_decapsulate_radius(struct eapol_test_data *e) 531{ 532 u8 *eap; 533 size_t len; 534 struct eap_hdr *hdr; 535 int eap_type = -1; 536 char buf[64]; 537 struct radius_msg *msg; 538 539 if (e->last_recv_radius == NULL) 540 return; 541 542 msg = e->last_recv_radius; 543 544 eap = radius_msg_get_eap(msg, &len); 545 if (eap == NULL) { 546 /* draft-aboba-radius-rfc2869bis-20.txt, Chap. 2.6.3: 547 * RADIUS server SHOULD NOT send Access-Reject/no EAP-Message 548 * attribute */ 549 wpa_printf(MSG_DEBUG, "could not extract " 550 "EAP-Message from RADIUS message"); 551 os_free(e->last_eap_radius); 552 e->last_eap_radius = NULL; 553 e->last_eap_radius_len = 0; 554 return; 555 } 556 557 if (len < sizeof(*hdr)) { 558 wpa_printf(MSG_DEBUG, "too short EAP packet " 559 "received from authentication server"); 560 os_free(eap); 561 return; 562 } 563 564 if (len > sizeof(*hdr)) 565 eap_type = eap[sizeof(*hdr)]; 566 567 hdr = (struct eap_hdr *) eap; 568 switch (hdr->code) { 569 case EAP_CODE_REQUEST: 570 os_snprintf(buf, sizeof(buf), "EAP-Request-%s (%d)", 571 eap_type >= 0 ? eap_type_text(eap_type) : "??", 572 eap_type); 573 break; 574 case EAP_CODE_RESPONSE: 575 os_snprintf(buf, sizeof(buf), "EAP Response-%s (%d)", 576 eap_type >= 0 ? eap_type_text(eap_type) : "??", 577 eap_type); 578 break; 579 case EAP_CODE_SUCCESS: 580 os_strlcpy(buf, "EAP Success", sizeof(buf)); 581 /* LEAP uses EAP Success within an authentication, so must not 582 * stop here with eloop_terminate(); */ 583 break; 584 case EAP_CODE_FAILURE: 585 os_strlcpy(buf, "EAP Failure", sizeof(buf)); 586 eloop_terminate(); 587 break; 588 default: 589 os_strlcpy(buf, "unknown EAP code", sizeof(buf)); 590 wpa_hexdump(MSG_DEBUG, "Decapsulated EAP packet", eap, len); 591 break; 592 } 593 wpa_printf(MSG_DEBUG, "decapsulated EAP packet (code=%d " 594 "id=%d len=%d) from RADIUS server: %s", 595 hdr->code, hdr->identifier, ntohs(hdr->length), buf); 596 597 /* sta->eapol_sm->be_auth.idFromServer = hdr->identifier; */ 598 599 os_free(e->last_eap_radius); 600 e->last_eap_radius = eap; 601 e->last_eap_radius_len = len; 602 603 { 604 struct ieee802_1x_hdr *dot1x; 605 dot1x = os_malloc(sizeof(*dot1x) + len); 606 assert(dot1x != NULL); 607 dot1x->version = EAPOL_VERSION; 608 dot1x->type = IEEE802_1X_TYPE_EAP_PACKET; 609 dot1x->length = htons(len); 610 os_memcpy((u8 *) (dot1x + 1), eap, len); 611 eapol_sm_rx_eapol(e->wpa_s->eapol, e->wpa_s->bssid, 612 (u8 *) dot1x, sizeof(*dot1x) + len); 613 os_free(dot1x); 614 } 615} 616 617 618static void ieee802_1x_get_keys(struct eapol_test_data *e, 619 struct radius_msg *msg, struct radius_msg *req, 620 const u8 *shared_secret, 621 size_t shared_secret_len) 622{ 623 struct radius_ms_mppe_keys *keys; 624 625 keys = radius_msg_get_ms_keys(msg, req, shared_secret, 626 shared_secret_len); 627 if (keys && keys->send == NULL && keys->recv == NULL) { 628 os_free(keys); 629 keys = radius_msg_get_cisco_keys(msg, req, shared_secret, 630 shared_secret_len); 631 } 632 633 if (keys) { 634 if (keys->send) { 635 wpa_hexdump(MSG_DEBUG, "MS-MPPE-Send-Key (sign)", 636 keys->send, keys->send_len); 637 } 638 if (keys->recv) { 639 wpa_hexdump(MSG_DEBUG, "MS-MPPE-Recv-Key (crypt)", 640 keys->recv, keys->recv_len); 641 e->authenticator_pmk_len = 642 keys->recv_len > PMK_LEN ? PMK_LEN : 643 keys->recv_len; 644 os_memcpy(e->authenticator_pmk, keys->recv, 645 e->authenticator_pmk_len); 646 if (e->authenticator_pmk_len == 16 && keys->send && 647 keys->send_len == 16) { 648 /* MS-CHAP-v2 derives 16 octet keys */ 649 wpa_printf(MSG_DEBUG, "Use MS-MPPE-Send-Key " 650 "to extend PMK to 32 octets"); 651 os_memcpy(e->authenticator_pmk + 652 e->authenticator_pmk_len, 653 keys->send, keys->send_len); 654 e->authenticator_pmk_len += keys->send_len; 655 } 656 } 657 658 os_free(keys->send); 659 os_free(keys->recv); 660 os_free(keys); 661 } 662} 663 664 665/* Process the RADIUS frames from Authentication Server */ 666static RadiusRxResult 667ieee802_1x_receive_auth(struct radius_msg *msg, struct radius_msg *req, 668 const u8 *shared_secret, size_t shared_secret_len, 669 void *data) 670{ 671 struct eapol_test_data *e = data; 672 673 /* RFC 2869, Ch. 5.13: valid Message-Authenticator attribute MUST be 674 * present when packet contains an EAP-Message attribute */ 675 if (msg->hdr->code == RADIUS_CODE_ACCESS_REJECT && 676 radius_msg_get_attr(msg, RADIUS_ATTR_MESSAGE_AUTHENTICATOR, NULL, 677 0) < 0 && 678 radius_msg_get_attr(msg, RADIUS_ATTR_EAP_MESSAGE, NULL, 0) < 0) { 679 wpa_printf(MSG_DEBUG, "Allowing RADIUS " 680 "Access-Reject without Message-Authenticator " 681 "since it does not include EAP-Message\n"); 682 } else if (radius_msg_verify(msg, shared_secret, shared_secret_len, 683 req, 1)) { 684 printf("Incoming RADIUS packet did not have correct " 685 "Message-Authenticator - dropped\n"); 686 return RADIUS_RX_UNKNOWN; 687 } 688 689 if (msg->hdr->code != RADIUS_CODE_ACCESS_ACCEPT && 690 msg->hdr->code != RADIUS_CODE_ACCESS_REJECT && 691 msg->hdr->code != RADIUS_CODE_ACCESS_CHALLENGE) { 692 printf("Unknown RADIUS message code\n"); 693 return RADIUS_RX_UNKNOWN; 694 } 695 696 e->radius_identifier = -1; 697 wpa_printf(MSG_DEBUG, "RADIUS packet matching with station"); 698 699 if (e->last_recv_radius) { 700 radius_msg_free(e->last_recv_radius); 701 os_free(e->last_recv_radius); 702 } 703 704 e->last_recv_radius = msg; 705 706 switch (msg->hdr->code) { 707 case RADIUS_CODE_ACCESS_ACCEPT: 708 e->radius_access_accept_received = 1; 709 ieee802_1x_get_keys(e, msg, req, shared_secret, 710 shared_secret_len); 711 break; 712 case RADIUS_CODE_ACCESS_REJECT: 713 e->radius_access_reject_received = 1; 714 break; 715 } 716 717 ieee802_1x_decapsulate_radius(e); 718 719 if ((msg->hdr->code == RADIUS_CODE_ACCESS_ACCEPT && 720 e->eapol_test_num_reauths < 0) || 721 msg->hdr->code == RADIUS_CODE_ACCESS_REJECT) { 722 eloop_terminate(); 723 } 724 725 return RADIUS_RX_QUEUED; 726} 727 728 729static void wpa_init_conf(struct eapol_test_data *e, 730 struct wpa_supplicant *wpa_s, const char *authsrv, 731 int port, const char *secret, 732 const char *cli_addr) 733{ 734 struct hostapd_radius_server *as; 735 int res; 736 737 wpa_s->bssid[5] = 1; 738 os_memcpy(wpa_s->own_addr, e->own_addr, ETH_ALEN); 739 e->own_ip_addr.s_addr = htonl((127 << 24) | 1); 740 os_strlcpy(wpa_s->ifname, "test", sizeof(wpa_s->ifname)); 741 742 e->radius_conf = os_zalloc(sizeof(struct hostapd_radius_servers)); 743 assert(e->radius_conf != NULL); 744 e->radius_conf->num_auth_servers = 1; 745 as = os_zalloc(sizeof(struct hostapd_radius_server)); 746 assert(as != NULL); 747#if defined(CONFIG_NATIVE_WINDOWS) || defined(CONFIG_ANSI_C_EXTRA) 748 { 749 int a[4]; 750 u8 *pos; 751 sscanf(authsrv, "%d.%d.%d.%d", &a[0], &a[1], &a[2], &a[3]); 752 pos = (u8 *) &as->addr.u.v4; 753 *pos++ = a[0]; 754 *pos++ = a[1]; 755 *pos++ = a[2]; 756 *pos++ = a[3]; 757 } 758#else /* CONFIG_NATIVE_WINDOWS or CONFIG_ANSI_C_EXTRA */ 759 inet_aton(authsrv, &as->addr.u.v4); 760#endif /* CONFIG_NATIVE_WINDOWS or CONFIG_ANSI_C_EXTRA */ 761 as->addr.af = AF_INET; 762 as->port = port; 763 as->shared_secret = (u8 *) os_strdup(secret); 764 as->shared_secret_len = os_strlen(secret); 765 e->radius_conf->auth_server = as; 766 e->radius_conf->auth_servers = as; 767 e->radius_conf->msg_dumps = 1; 768 if (cli_addr) { 769 if (hostapd_parse_ip_addr(cli_addr, 770 &e->radius_conf->client_addr) == 0) 771 e->radius_conf->force_client_addr = 1; 772 else { 773 wpa_printf(MSG_ERROR, "Invalid IP address '%s'", 774 cli_addr); 775 assert(0); 776 } 777 } 778 779 e->radius = radius_client_init(wpa_s, e->radius_conf); 780 assert(e->radius != NULL); 781 782 res = radius_client_register(e->radius, RADIUS_AUTH, 783 ieee802_1x_receive_auth, e); 784 assert(res == 0); 785} 786 787 788static int scard_test(void) 789{ 790 struct scard_data *scard; 791 size_t len; 792 char imsi[20]; 793 unsigned char _rand[16]; 794#ifdef PCSC_FUNCS 795 unsigned char sres[4]; 796 unsigned char kc[8]; 797#endif /* PCSC_FUNCS */ 798#define num_triplets 5 799 unsigned char rand_[num_triplets][16]; 800 unsigned char sres_[num_triplets][4]; 801 unsigned char kc_[num_triplets][8]; 802 int i, res; 803 size_t j; 804 805#define AKA_RAND_LEN 16 806#define AKA_AUTN_LEN 16 807#define AKA_AUTS_LEN 14 808#define RES_MAX_LEN 16 809#define IK_LEN 16 810#define CK_LEN 16 811 unsigned char aka_rand[AKA_RAND_LEN]; 812 unsigned char aka_autn[AKA_AUTN_LEN]; 813 unsigned char aka_auts[AKA_AUTS_LEN]; 814 unsigned char aka_res[RES_MAX_LEN]; 815 size_t aka_res_len; 816 unsigned char aka_ik[IK_LEN]; 817 unsigned char aka_ck[CK_LEN]; 818 819 scard = scard_init(SCARD_TRY_BOTH); 820 if (scard == NULL) 821 return -1; 822 if (scard_set_pin(scard, "1234")) { 823 wpa_printf(MSG_WARNING, "PIN validation failed"); 824 scard_deinit(scard); 825 return -1; 826 } 827 828 len = sizeof(imsi); 829 if (scard_get_imsi(scard, imsi, &len)) 830 goto failed; 831 wpa_hexdump_ascii(MSG_DEBUG, "SCARD: IMSI", (u8 *) imsi, len); 832 /* NOTE: Permanent Username: 1 | IMSI */ 833 834 os_memset(_rand, 0, sizeof(_rand)); 835 if (scard_gsm_auth(scard, _rand, sres, kc)) 836 goto failed; 837 838 os_memset(_rand, 0xff, sizeof(_rand)); 839 if (scard_gsm_auth(scard, _rand, sres, kc)) 840 goto failed; 841 842 for (i = 0; i < num_triplets; i++) { 843 os_memset(rand_[i], i, sizeof(rand_[i])); 844 if (scard_gsm_auth(scard, rand_[i], sres_[i], kc_[i])) 845 goto failed; 846 } 847 848 for (i = 0; i < num_triplets; i++) { 849 printf("1"); 850 for (j = 0; j < len; j++) 851 printf("%c", imsi[j]); 852 printf(","); 853 for (j = 0; j < 16; j++) 854 printf("%02X", rand_[i][j]); 855 printf(","); 856 for (j = 0; j < 4; j++) 857 printf("%02X", sres_[i][j]); 858 printf(","); 859 for (j = 0; j < 8; j++) 860 printf("%02X", kc_[i][j]); 861 printf("\n"); 862 } 863 864 wpa_printf(MSG_DEBUG, "Trying to use UMTS authentication"); 865 866 /* seq 39 (0x28) */ 867 os_memset(aka_rand, 0xaa, 16); 868 os_memcpy(aka_autn, "\x86\x71\x31\xcb\xa2\xfc\x61\xdf" 869 "\xa3\xb3\x97\x9d\x07\x32\xa2\x12", 16); 870 871 res = scard_umts_auth(scard, aka_rand, aka_autn, aka_res, &aka_res_len, 872 aka_ik, aka_ck, aka_auts); 873 if (res == 0) { 874 wpa_printf(MSG_DEBUG, "UMTS auth completed successfully"); 875 wpa_hexdump(MSG_DEBUG, "RES", aka_res, aka_res_len); 876 wpa_hexdump(MSG_DEBUG, "IK", aka_ik, IK_LEN); 877 wpa_hexdump(MSG_DEBUG, "CK", aka_ck, CK_LEN); 878 } else if (res == -2) { 879 wpa_printf(MSG_DEBUG, "UMTS auth resulted in synchronization " 880 "failure"); 881 wpa_hexdump(MSG_DEBUG, "AUTS", aka_auts, AKA_AUTS_LEN); 882 } else { 883 wpa_printf(MSG_DEBUG, "UMTS auth failed"); 884 } 885 886failed: 887 scard_deinit(scard); 888 889 return 0; 890#undef num_triplets 891} 892 893 894static int scard_get_triplets(int argc, char *argv[]) 895{ 896 struct scard_data *scard; 897 size_t len; 898 char imsi[20]; 899 unsigned char _rand[16]; 900 unsigned char sres[4]; 901 unsigned char kc[8]; 902 int num_triplets; 903 int i; 904 size_t j; 905 906 if (argc < 2 || ((num_triplets = atoi(argv[1])) <= 0)) { 907 printf("invalid parameters for sim command\n"); 908 return -1; 909 } 910 911 if (argc <= 2 || os_strcmp(argv[2], "debug") != 0) { 912 /* disable debug output */ 913 wpa_debug_level = 99; 914 } 915 916 scard = scard_init(SCARD_GSM_SIM_ONLY); 917 if (scard == NULL) { 918 printf("Failed to open smartcard connection\n"); 919 return -1; 920 } 921 if (scard_set_pin(scard, argv[0])) { 922 wpa_printf(MSG_WARNING, "PIN validation failed"); 923 scard_deinit(scard); 924 return -1; 925 } 926 927 len = sizeof(imsi); 928 if (scard_get_imsi(scard, imsi, &len)) { 929 scard_deinit(scard); 930 return -1; 931 } 932 933 for (i = 0; i < num_triplets; i++) { 934 os_memset(_rand, i, sizeof(_rand)); 935 if (scard_gsm_auth(scard, _rand, sres, kc)) 936 break; 937 938 /* IMSI:Kc:SRES:RAND */ 939 for (j = 0; j < len; j++) 940 printf("%c", imsi[j]); 941 printf(":"); 942 for (j = 0; j < 8; j++) 943 printf("%02X", kc[j]); 944 printf(":"); 945 for (j = 0; j < 4; j++) 946 printf("%02X", sres[j]); 947 printf(":"); 948 for (j = 0; j < 16; j++) 949 printf("%02X", _rand[j]); 950 printf("\n"); 951 } 952 953 scard_deinit(scard); 954 955 return 0; 956} 957 958 959static void eapol_test_terminate(int sig, void *eloop_ctx, 960 void *signal_ctx) 961{ 962 struct wpa_supplicant *wpa_s = eloop_ctx; 963 wpa_msg(wpa_s, MSG_INFO, "Signal %d received - terminating", sig); 964 eloop_terminate(); 965} 966 967 968static void usage(void) 969{ 970 printf("usage:\n" 971 "eapol_test [-nWS] -c<conf> [-a<AS IP>] [-p<AS port>] " 972 "[-s<AS secret>]\\\n" 973 " [-r<count>] [-t<timeout>] [-C<Connect-Info>] \\\n" 974 " [-M<client MAC address>] \\\n" 975 " [-N<attr spec>] \\\n" 976 " [-A<client IP>]\n" 977 "eapol_test scard\n" 978 "eapol_test sim <PIN> <num triplets> [debug]\n" 979 "\n"); 980 printf("options:\n" 981 " -c<conf> = configuration file\n" 982 " -a<AS IP> = IP address of the authentication server, " 983 "default 127.0.0.1\n" 984 " -p<AS port> = UDP port of the authentication server, " 985 "default 1812\n" 986 " -s<AS secret> = shared secret with the authentication " 987 "server, default 'radius'\n" 988 " -A<client IP> = IP address of the client, default: select " 989 "automatically\n" 990 " -r<count> = number of re-authentications\n" 991 " -W = wait for a control interface monitor before starting\n" 992 " -S = save configuration after authentication\n" 993 " -n = no MPPE keys expected\n" 994 " -t<timeout> = sets timeout in seconds (default: 30 s)\n" 995 " -C<Connect-Info> = RADIUS Connect-Info (default: " 996 "CONNECT 11Mbps 802.11b)\n" 997 " -M<client MAC address> = Set own MAC address " 998 "(Calling-Station-Id,\n" 999 " default: 02:00:00:00:00:01)\n" 1000 " -N<attr spec> = send arbitrary attribute specified by:\n" 1001 " attr_id:syntax:value or attr_id\n" 1002 " attr_id - number id of the attribute\n" 1003 " syntax - one of: s, d, x\n" 1004 " s = string\n" 1005 " d = integer\n" 1006 " x = octet string\n" 1007 " value - attribute value.\n" 1008 " When only attr_id is specified, NULL will be used as " 1009 "value.\n" 1010 " Multiple attributes can be specified by using the " 1011 "option several times.\n"); 1012} 1013 1014 1015int main(int argc, char *argv[]) 1016{ 1017 struct wpa_supplicant wpa_s; 1018 int c, ret = 1, wait_for_monitor = 0, save_config = 0; 1019 char *as_addr = "127.0.0.1"; 1020 int as_port = 1812; 1021 char *as_secret = "radius"; 1022 char *cli_addr = NULL; 1023 char *conf = NULL; 1024 int timeout = 30; 1025 char *pos; 1026 struct extra_radius_attr *p = NULL, *p1; 1027 1028 if (os_program_init()) 1029 return -1; 1030 1031 hostapd_logger_register_cb(hostapd_logger_cb); 1032 1033 os_memset(&eapol_test, 0, sizeof(eapol_test)); 1034 eapol_test.connect_info = "CONNECT 11Mbps 802.11b"; 1035 os_memcpy(eapol_test.own_addr, "\x02\x00\x00\x00\x00\x01", ETH_ALEN); 1036 1037 wpa_debug_level = 0; 1038 wpa_debug_show_keys = 1; 1039 1040 for (;;) { 1041 c = getopt(argc, argv, "a:A:c:C:M:nN:p:r:s:St:W"); 1042 if (c < 0) 1043 break; 1044 switch (c) { 1045 case 'a': 1046 as_addr = optarg; 1047 break; 1048 case 'A': 1049 cli_addr = optarg; 1050 break; 1051 case 'c': 1052 conf = optarg; 1053 break; 1054 case 'C': 1055 eapol_test.connect_info = optarg; 1056 break; 1057 case 'M': 1058 if (hwaddr_aton(optarg, eapol_test.own_addr)) { 1059 usage(); 1060 return -1; 1061 } 1062 break; 1063 case 'n': 1064 eapol_test.no_mppe_keys++; 1065 break; 1066 case 'p': 1067 as_port = atoi(optarg); 1068 break; 1069 case 'r': 1070 eapol_test.eapol_test_num_reauths = atoi(optarg); 1071 break; 1072 case 's': 1073 as_secret = optarg; 1074 break; 1075 case 'S': 1076 save_config++; 1077 break; 1078 case 't': 1079 timeout = atoi(optarg); 1080 break; 1081 case 'W': 1082 wait_for_monitor++; 1083 break; 1084 case 'N': 1085 p1 = os_zalloc(sizeof(p1)); 1086 if (p1 == NULL) 1087 break; 1088 if (!p) 1089 eapol_test.extra_attrs = p1; 1090 else 1091 p->next = p1; 1092 p = p1; 1093 1094 p->type = atoi(optarg); 1095 pos = os_strchr(optarg, ':'); 1096 if (pos == NULL) { 1097 p->syntax = 'n'; 1098 p->data = NULL; 1099 break; 1100 } 1101 1102 pos++; 1103 if (pos[0] == '\0' || pos[1] != ':') { 1104 printf("Incorrect format of attribute " 1105 "specification\n"); 1106 break; 1107 } 1108 1109 p->syntax = pos[0]; 1110 p->data = pos + 2; 1111 break; 1112 default: 1113 usage(); 1114 return -1; 1115 } 1116 } 1117 1118 if (argc > optind && os_strcmp(argv[optind], "scard") == 0) { 1119 return scard_test(); 1120 } 1121 1122 if (argc > optind && os_strcmp(argv[optind], "sim") == 0) { 1123 return scard_get_triplets(argc - optind - 1, 1124 &argv[optind + 1]); 1125 } 1126 1127 if (conf == NULL) { 1128 usage(); 1129 printf("Configuration file is required.\n"); 1130 return -1; 1131 } 1132 1133 if (eap_peer_register_methods()) { 1134 wpa_printf(MSG_ERROR, "Failed to register EAP methods"); 1135 return -1; 1136 } 1137 1138 if (eloop_init(&wpa_s)) { 1139 wpa_printf(MSG_ERROR, "Failed to initialize event loop"); 1140 return -1; 1141 } 1142 1143 os_memset(&wpa_s, 0, sizeof(wpa_s)); 1144 eapol_test.wpa_s = &wpa_s; 1145 wpa_s.conf = wpa_config_read(conf); 1146 if (wpa_s.conf == NULL) { 1147 printf("Failed to parse configuration file '%s'.\n", conf); 1148 return -1; 1149 } 1150 if (wpa_s.conf->ssid == NULL) { 1151 printf("No networks defined.\n"); 1152 return -1; 1153 } 1154 1155 wpa_init_conf(&eapol_test, &wpa_s, as_addr, as_port, as_secret, 1156 cli_addr); 1157 wpa_s.ctrl_iface = wpa_supplicant_ctrl_iface_init(&wpa_s); 1158 if (wpa_s.ctrl_iface == NULL) { 1159 printf("Failed to initialize control interface '%s'.\n" 1160 "You may have another eapol_test process already " 1161 "running or the file was\n" 1162 "left by an unclean termination of eapol_test in " 1163 "which case you will need\n" 1164 "to manually remove this file before starting " 1165 "eapol_test again.\n", 1166 wpa_s.conf->ctrl_interface); 1167 return -1; 1168 } 1169 if (wpa_supplicant_scard_init(&wpa_s, wpa_s.conf->ssid)) 1170 return -1; 1171 1172 if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid)) 1173 return -1; 1174 1175 if (wait_for_monitor) 1176 wpa_supplicant_ctrl_iface_wait(wpa_s.ctrl_iface); 1177 1178 eloop_register_timeout(timeout, 0, eapol_test_timeout, &eapol_test, 1179 NULL); 1180 eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL); 1181 eloop_register_signal_terminate(eapol_test_terminate, NULL); 1182 eloop_register_signal_reconfig(eapol_test_terminate, NULL); 1183 eloop_run(); 1184 1185 eloop_cancel_timeout(eapol_test_timeout, &eapol_test, NULL); 1186 eloop_cancel_timeout(eapol_sm_reauth, &eapol_test, NULL); 1187 1188 if (eapol_test_compare_pmk(&eapol_test) == 0 || 1189 eapol_test.no_mppe_keys) 1190 ret = 0; 1191 if (eapol_test.auth_timed_out) 1192 ret = -2; 1193 if (eapol_test.radius_access_reject_received) 1194 ret = -3; 1195 1196 if (save_config) 1197 wpa_config_write(conf, wpa_s.conf); 1198 1199 test_eapol_clean(&eapol_test, &wpa_s); 1200 1201 eap_peer_unregister_methods(); 1202 1203 eloop_destroy(); 1204 1205 printf("MPPE keys OK: %d mismatch: %d\n", 1206 eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch); 1207 if (eapol_test.num_mppe_mismatch) 1208 ret = -4; 1209 if (ret) 1210 printf("FAILURE\n"); 1211 else 1212 printf("SUCCESS\n"); 1213 1214 os_program_deinit(); 1215 1216 return ret; 1217} 1218