| 0e9e13eb46d8ffbb456f937db4a8fb0da02dd5d2 |
|
06-Jun-2012 |
Scott Anderson <saa@android.com> |
am 2ca3e6b3: adb: Generalizing -s to take qualifiers.
* commit '2ca3e6b35f79136418ebc32fef57580698dbd045':
adb: Generalizing -s to take qualifiers.
|
| 3fef581bc7a513defe48329973d14bec722f1293 |
|
06-Jun-2012 |
Scott Anderson <saa@android.com> |
am e82c2db0: adb: Transmit key properties in banner of connect message
* commit 'e82c2db05cae70a0490a1f84b7211ef42c329671':
adb: Transmit key properties in banner of connect message
|
| 2ca3e6b35f79136418ebc32fef57580698dbd045 |
|
31-May-2012 |
Scott Anderson <saa@android.com> |
adb: Generalizing -s to take qualifiers.
Prior to this change, -s could take either a serial number or a
device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This
change extends -s to also allow product, model or device names
(e.g. "-s product:mysid"). These new qualifiers will only be
available on devices that are running an adb daemon that provides
properties in the connect message per Change-Id:
I09200decde4facb8fc9b4056fdae910155f2bcb9
The product, model and device are derived from the
ro.product.name, ro.product.model and ro.product.device
properties respectively. They are prefixed with "product:",
"model:" or "device:" as appropriate. In addition, any
non-alphanumerics in the model are changed to underscores.
If the -s parameter matches multiple devices, the result will be
the same as when multiple devices are connected but no -d, -e or
-s option is specified. In general, this means the user will get
"error: more than one device". However for get-state,
get-devpath and get-serialno, they will get "unknown".
The format of "devices -l" was changed to list all of the
qualifiers that are available. The following example output
(with the last digits of the serial numbers replaced with X's) is
with a Galaxy Prime with an older adb daemon and another Galaxy
Prime and Galaxy S both with the enhanced adb daemons:
List of devices attached
016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro
3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo
01498B1F020150XX device usb:1-4.1
Note that the serial number and state are now column oriented
instead of tab delimited. After the serial number and state, all
qualifiers are listed with each preceded by a space. The output
of the original devices command (without -l) is unchanged.
Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56
Signed-off-by: Scott Anderson <saa@android.com>
/system/core/adb/transport.c
|
| e82c2db05cae70a0490a1f84b7211ef42c329671 |
|
25-May-2012 |
Scott Anderson <saa@android.com> |
adb: Transmit key properties in banner of connect message
protocol.txt says that the connect message should have three
fields:
<systemtype>:<serialno>:<banner>
In reality, what is transmitted is simply:
<systemtype>::
The serialno is obtained via other means so doesn't really need
to be a part of the connect message. This change puts the
ro.product.name, ro.product.model and ro.product.device
properties in the <banner> for devices. Each property is
terminated by a semicolon (;) with the key and value separated by
an equals sign (=). Example message:
device::ro.product.name=<prd>;ro.product.model=<mdl>;ro.product.device=<dev>;
Making this change will enable the device list to provide more
information to the user and to give the potential for being able
to select which device to talk to with the -s option.
Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9
Signed-off-by: Scott Anderson <saa@android.com>
/system/core/adb/transport.c
|
| e5867141c9364596fbcd47195aeff5b0f9844435 |
|
01-Jun-2012 |
Scott Anderson <saa@android.com> |
am 3608d832: adb: Fix two problems with device path implementation.
* commit '3608d832425ca3a6d00c4040f3bb979c5aa49899':
adb: Fix two problems with device path implementation.
|
| 3608d832425ca3a6d00c4040f3bb979c5aa49899 |
|
31-May-2012 |
Scott Anderson <saa@android.com> |
adb: Fix two problems with device path implementation.
The commands that use "host-serial:<serial-number>:<request>"
service did not handle "-s usb:<path>". The -s parameter is
passed as the serial number in the protocol and then matched
against either the serial number or device path. However,
skip_host_serial() in sockets.c did not know about the usb:
syntax, the serial number was parsed incorrectly. Before this
change:
$ adb -s usb:1-4.1 get-state
error: unknown host service
After:
$ adb -s usb:1-4.1 get-state
device
Code was added in find_transport() in transport.c to match device
paths, but find_transport() is only used for socket connections
so matching device paths is not needed.
Change-Id: I922cec963659dafadd0fbc8fa36dee3b55fe366c
Signed-off-by: Scott Anderson <saa@android.com>
/system/core/adb/transport.c
|
| 76e47e0ec84eaf7faf6f77b853ba74345875a8e3 |
|
02-May-2012 |
Scott Anderson <saa@android.com> |
am 9526a788: Merge "adb: Add ability to specify device path" into ics-aah
* commit '9526a788a6bd528e14622404e8750bdcc147d15a':
adb: Add ability to specify device path
|
| e109d266c12c5f537d429ca4b892f2719e02c2da |
|
20-Apr-2012 |
Scott Anderson <saa@android.com> |
adb: Add ability to specify device path
For manufacturing and testing, there is a need to talk to
whatever device is connected to a given port on the host. This
change modifies adb's "-s" option to take either a serial
number or a device path. The device paths of the connected
devices can be listed using "adb devices -l" whose output
will resemble:
List of devices attached
016B75D60A00600D usb:2-5 device
3031D0B2E71D00EC usb:1-4.3 device
The second column lists the device paths. If the -l option is
not given, the output from "adb devices" will be the same as
it used to be (i.e. the paths will not be printed).
The device path can also be obtained with the get-devpath
command:
$adb -s 3031D0B2E71D00EC get-devpath
usb:1-4.3
Note that the format of the device paths are platform dependent.
The example above is from Linux. On OS-X, the paths will be
"usb:" followed by hex digits. For other platforms, the device
paths will be printed as "????????????" and the -s option will
not be able to select a device until someone implements the
underlying functionality.
Change-Id: I057d5d9f8c5bb72eddf5b8088aae110763f809d7
Signed-off-by: Scott Anderson <saa@android.com>
/system/core/adb/transport.c
|
| 447f061da19fe46bae35f1cdd93eeb16bc225463 |
|
09-Jan-2012 |
Doug Zongker <dougz@android.com> |
add "adb sideload" and sideload connection state
Recovery will soon support a minimal implementation of adbd which will
do nothing but accept downloads from the "adb sideload" command and
install them. This is the client side command (mostly resurrected out
of the old circa-2007 "adb recover" command) and the new connection
state.
Change-Id: I4f67b63f1b3b38d28c285d1278d46782679762a2
/system/core/adb/transport.c
|
| 408fa57864c01113deaa213e5c1848a9c594ae92 |
|
16-Mar-2011 |
JP Abgrall <jpa@google.com> |
adb: fix subprocess exit handling, oom adjust fixes, extra debugging.
* Add support for correctly handling subprocess termination in shell service (b/3400254 b/3482112 b/2249397)
- have a waitpid() track the subprocess, then notify the fdevent via a socket
- force an eof on the pty master in fdevent's new subproc handler.
- modify fdevent to force-read the pty after an exit.
* Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections, where it
belongs.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
- Make sure sysdesp init (mutex init also) is called early.
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
* Fix some errno handling and make D() correctly handle it.
* Add new adb trace_mask: services.
* Make fdevent_loop's handle BADFDs more gracefully (could occur some subproc closed its pts explicitely).
* Remove obsolete commandline args reported in help. (b/3509092)
Change-Id: I928287fdf4f1a86777e22ce105f9581685f46e35
/system/core/adb/transport.c
|
| 0e7c4274c687446dbe30a814278d7a6b99da8c4e |
|
24-Feb-2011 |
JP Abgrall <jpa@google.com> |
Revert "Fix adb hang when subprocess dies early."
This is for http://b/3482112 "adb interactions with device causing test harness failures".
This reverts commit 69c5c4c45bd4f1575ae8bdba13795297be7deb8c.
Change-Id: I630bf2e04d2ecf0223bd2af4e87136754ff880d3
/system/core/adb/transport.c
|
| 69c5c4c45bd4f1575ae8bdba13795297be7deb8c |
|
18-Feb-2011 |
JP Abgrall <jpa@google.com> |
Fix adb hang when subprocess dies early.
* Handling of the subprocess and its FD.
This fixes http://b/3400254 "Many bugreports getting hung at the end in monkey"
- Start up a service thread that waits on the subprocess to terminate,
then closes the FD associated with it.
- Have the event handler select() with a timeout so that it can
detect the closed FD. Select() with no timeout does not return when an FD is closed.
- Have the event handler force a read on the closed FD to trigger the close sequence.
- Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
Change-Id: Ie5c4a5e6bfbe3f22201adf5f9a205d32e069bf9d
Signed-off-by: JP Abgrall <jpa@google.com>
/system/core/adb/transport.c
|
| 730ff3b786058dadde98743522d760bd9331a9dd |
|
06-Jan-2011 |
David 'Digit' Turner <digit@google.com> |
adb: improve debug traces readability.
This patch makes the traces easier to read. For example transports are
displayed by name/serial instead of their hex address.
Change-Id: I7e8df44ddbec19754d63d989bd56485998b4627b
/system/core/adb/transport.c
|
| cbbe79add1410b53ec65936cfb1b74cac68467f0 |
|
24-May-2010 |
Mike Lockwood <lockwood@android.com> |
adb connect and disconnect improvements:
Port number is now optional. Will use default port 5555 if not specified.
"adb disconnect" with no additional arguments will disconnect all TCP devices.
Change-Id: I7fc26528ed85e66a73b8f6254cea7bf83d98109f
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/adb/transport.c
|
| 8cf0d59f61ae0b8554ecf3fe051850508b761b79 |
|
12-Oct-2009 |
Mike Lockwood <lockwood@android.com> |
adb: Add "adb disconnect" command for disconnecting TCP/IP devices.
Also check that device is not already connected in "adb connect"
Change-Id: I5f84b56b63d8c6932f23791cac319fd6bc39d36c
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/adb/transport.c
|
| ff19670d485fd5ee296e23b00b035ac22975c647 |
|
25-Aug-2009 |
Mike Lockwood <lockwood@android.com> |
adb: Improved support for running adb over TCP/IP
Added new commands:
adb connect <host>:<port> (to connect to a device via TCP/IP)
adb tcpip <port> (to restart adbd on the device to listen on TCP/IP)
adb usb (to restart adbd on the device to listen USB)
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/adb/transport.c
|
| 37d3111b1c1ce61c3d9b10ed3ccaed9e5fad1e06 |
|
08-Aug-2009 |
Mike Lockwood <lockwood@android.com> |
adb: print better error message when there are insufficient permissions for a device.
Now, a command like "adb shell" will print "insufficient permissions for device"
instead of "device not found" if adb does not have permissions to communicate with the device.
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/adb/transport.c
|
| 0927bf9690127bc45cf8837a1467759e9720399a |
|
08-Aug-2009 |
Mike Lockwood <lockwood@android.com> |
adb: On Linux, detect USB devices for which adb does not have permissions to communicate with.
adb devices will now list devices without adequate file system permissions in /dev/bus/usb as:
List of devices attached
???????????? no permissions
Signed-off-by: Mike Lockwood <lockwood@android.com>
/system/core/adb/transport.c
|
| dd7bc3319deb2b77c5d07a51b7d6cd7e11b5beb0 |
|
04-Mar-2009 |
The Android Open Source Project <initial-contribution@android.com> |
auto import from //depot/cupcake/@135843
/system/core/adb/transport.c
|
| e54eebbf1a908d65ee8cf80bab62821c05666d70 |
|
04-Mar-2009 |
The Android Open Source Project <initial-contribution@android.com> |
auto import from //depot/cupcake/@135843
/system/core/adb/transport.c
|
| 4f6e8d7a00cbeda1e70cc15be9c4af1018bdad53 |
|
21-Oct-2008 |
The Android Open Source Project <initial-contribution@android.com> |
Initial Contribution
/system/core/adb/transport.c
|