1/****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19/****************************************************************************** 20 * 21 * this file contains GATT authentication handling functions 22 * 23 ******************************************************************************/ 24#include "bt_target.h" 25 26#if BLE_INCLUDED == TRUE 27#include <string.h> 28#include "gki.h" 29 30#include "gatt_int.h" 31#include "gatt_api.h" 32#include "btm_int.h" 33 34/******************************************************************************* 35** 36** Function gatt_sign_data 37** 38** Description This function sign the data for write command. 39** 40** Returns TRUE if encrypted, otherwise FALSE. 41** 42*******************************************************************************/ 43static BOOLEAN gatt_sign_data (tGATT_CLCB *p_clcb) 44{ 45 tGATT_VALUE *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf; 46 UINT8 *p_data = NULL, *p; 47 UINT16 payload_size = p_clcb->p_tcb->payload_size; 48 BOOLEAN status = FALSE; 49 UINT8 *p_signature; 50 51 p_data = (UINT8 *)GKI_getbuf((UINT16)(p_attr->len + 3)); /* 3 = 2 byte handle + opcode */ 52 53 if (p_data != NULL) 54 { 55 p = p_data; 56 UINT8_TO_STREAM(p, GATT_SIGN_CMD_WRITE); 57 UINT16_TO_STREAM(p, p_attr->handle); 58 ARRAY_TO_STREAM(p, p_attr->value, p_attr->len); 59 60 /* sign data length should be attribulte value length plus 2B handle + 1B op code */ 61 if ((payload_size - GATT_AUTH_SIGN_LEN - 3) < p_attr->len) 62 p_attr->len = payload_size - GATT_AUTH_SIGN_LEN - 3; 63 64 p_signature = p_attr->value + p_attr->len; 65 if (BTM_BleDataSignature(p_clcb->p_tcb->peer_bda, 66 p_data, 67 (UINT16)(p_attr->len + 3), /* 3 = 2 byte handle + opcode */ 68 p_signature)) 69 { 70 p_attr->len += BTM_BLE_AUTH_SIGN_LEN; 71 gatt_set_ch_state(p_clcb->p_tcb, GATT_CH_OPEN); 72 gatt_act_write(p_clcb); 73 } 74 else 75 { 76 gatt_end_operation(p_clcb, GATT_INTERNAL_ERROR, NULL); 77 } 78 79 GKI_freebuf(p_data); 80 } 81 82 return status; 83} 84 85/******************************************************************************* 86** 87** Function gatt_verify_signature 88** 89** Description This function start to verify the sign data when receiving 90** the data from peer device. 91** 92** Returns 93** 94*******************************************************************************/ 95void gatt_verify_signature(tGATT_TCB *p_tcb, BT_HDR *p_buf) 96{ 97 UINT16 cmd_len; 98 UINT8 op_code; 99 UINT8 *p, *p_orig = (UINT8 *)(p_buf + 1) + p_buf->offset; 100 UINT32 counter; 101 102 cmd_len = p_buf->len - GATT_AUTH_SIGN_LEN + 4; 103 p = p_orig + cmd_len - 4; 104 STREAM_TO_UINT32(counter, p); 105 106 if (BTM_BleVerifySignature(p_tcb->peer_bda, p_orig, cmd_len, counter, p)) 107 { 108 STREAM_TO_UINT8(op_code, p_orig); 109 gatt_server_handle_client_req (p_tcb, op_code, (UINT16)(p_buf->len - 1), p_orig); 110 } 111 else 112 { 113 /* if this is a bad signature, assume from attacker, ignore it */ 114 GATT_TRACE_ERROR0("Signature Verification Failed"); 115 gatt_disconnect(p_tcb->peer_bda); 116 } 117 118 return; 119} 120/******************************************************************************* 121** 122** Function gatt_sec_check_complete 123** 124** Description security check complete and proceed to data sending action. 125** 126** Returns void. 127** 128*******************************************************************************/ 129void gatt_sec_check_complete(BOOLEAN sec_check_ok, tGATT_CLCB *p_clcb) 130{ 131 p_clcb->p_tcb->p_clcb = NULL; 132 gatt_set_sec_act(p_clcb->p_tcb, GATT_SEC_NONE); 133 134 if (!sec_check_ok) 135 { 136 gatt_end_operation(p_clcb, GATT_AUTH_FAIL, NULL); 137 } 138 else if (p_clcb->operation == GATTC_OPTYPE_WRITE) 139 { 140 gatt_act_write(p_clcb); 141 } 142 else if (p_clcb->operation == GATTC_OPTYPE_READ) 143 { 144 gatt_act_read(p_clcb, p_clcb->counter); 145 } 146} 147/******************************************************************************* 148** 149** Function gatt_enc_cmpl_cback 150** 151** Description link encryption complete callback. 152** 153** Returns 154** 155*******************************************************************************/ 156void gatt_enc_cmpl_cback(BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result) 157{ 158 tGATT_TCB *p_tcb; 159 UINT8 sec_flag; 160 BOOLEAN status = FALSE; 161 162 GATT_TRACE_DEBUG0("gatt_enc_cmpl_cback"); 163 if ((p_tcb = gatt_find_tcb_by_addr(bd_addr)) != NULL) 164 { 165 gatt_set_ch_state(p_tcb, GATT_CH_OPEN); 166 167 if (result == BTM_SUCCESS) 168 { 169 if (gatt_get_sec_act(p_tcb) == GATT_SEC_ENCRYPT_MITM ) 170 { 171 BTM_GetSecurityFlags(bd_addr, &sec_flag); 172 if (sec_flag & sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) 173 { 174 status = TRUE; 175 } 176 } 177 else 178 { 179 status = TRUE; 180 } 181 } 182 gatt_sec_check_complete(status , (tGATT_CLCB *)p_tcb->p_clcb); 183 } 184 else 185 { 186 GATT_TRACE_ERROR0("enc callback for unknown bd_addr"); 187 } 188} 189 190/******************************************************************************* 191** 192** Function gatt_set_sec_act 193** 194** Description This function set the sec_act in clcb 195** 196** Returns none 197** 198*******************************************************************************/ 199void gatt_set_sec_act(tGATT_TCB *p_tcb, tGATT_SEC_ACTION sec_act) 200{ 201 if (p_tcb) 202 { 203 p_tcb->sec_act = sec_act; 204 } 205} 206/******************************************************************************* 207** 208** Function gatt_get_sec_act 209** 210** Description This function get the sec_act in clcb 211** 212** Returns none 213** 214*******************************************************************************/ 215tGATT_SEC_ACTION gatt_get_sec_act(tGATT_TCB *p_tcb) 216{ 217 tGATT_SEC_ACTION sec_act = GATT_SEC_NONE; 218 if (p_tcb) 219 { 220 sec_act = p_tcb->sec_act; 221 } 222 return sec_act; 223} 224/******************************************************************************* 225** 226** Function gatt_determine_sec_act 227** 228** Description This routine determine the security action based on auth_request and 229** current link status 230** 231** Returns tGATT_SEC_ACTION security action 232** 233*******************************************************************************/ 234tGATT_SEC_ACTION gatt_determine_sec_act(tGATT_CLCB *p_clcb ) 235{ 236 tGATT_SEC_ACTION act = GATT_SEC_OK; 237 UINT8 sec_flag; 238 tGATT_TCB *p_tcb = p_clcb->p_tcb; 239 tGATT_AUTH_REQ auth_req = p_clcb->auth_req; 240 241 BOOLEAN is_link_encrypted= FALSE; 242 BOOLEAN is_le_link=FALSE; 243 BOOLEAN is_link_key_known=FALSE; 244 BOOLEAN is_key_mitm=FALSE; 245 UINT8 key_type; 246 247 if (auth_req == GATT_AUTH_REQ_NONE ) 248 return act; 249 250 is_le_link = btm_ble_check_link_type(p_tcb->peer_bda); 251 BTM_GetSecurityFlags(p_tcb->peer_bda, &sec_flag); 252 253 if (sec_flag & BTM_SEC_FLAG_ENCRYPTED) 254 { 255 is_link_encrypted = TRUE; 256 } 257 if (sec_flag & BTM_SEC_FLAG_LKEY_KNOWN) 258 { 259 is_link_key_known = TRUE; 260 if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) 261 { 262 is_key_mitm = TRUE; 263 } 264 } 265 266 /* first check link key upgrade required or not */ 267 switch (auth_req) 268 { 269 case GATT_AUTH_REQ_MITM: 270 case GATT_AUTH_REQ_SIGNED_MITM: 271 if (!is_key_mitm) 272 act = GATT_SEC_ENCRYPT_MITM; 273 break; 274 275 case GATT_AUTH_REQ_NO_MITM: 276 case GATT_AUTH_REQ_SIGNED_NO_MITM: 277 if (!is_link_key_known) 278 act = GATT_SEC_ENCRYPT_NO_MITM; 279 break; 280 default: 281 break; 282 } 283 284 /* now check link needs to be encrypted or not if the link key upgrade is not required */ 285 if (act == GATT_SEC_OK) 286 { 287 if (is_le_link && 288 (p_clcb->operation == GATTC_OPTYPE_WRITE) && 289 (p_clcb->op_subtype == GATT_WRITE_NO_RSP)) 290 { 291 /* this is a write command request 292 check data signing required or not */ 293 if (!is_link_encrypted) 294 { 295 btm_ble_get_enc_key_type(p_tcb->peer_bda, &key_type); 296 297 if ( (key_type & BTM_LE_KEY_LCSRK) && 298 ((auth_req == GATT_AUTH_REQ_SIGNED_NO_MITM) || 299 (auth_req == GATT_AUTH_REQ_SIGNED_MITM))) 300 { 301 act = GATT_SEC_SIGN_DATA; 302 } 303 else 304 { 305 act = GATT_SEC_ENCRYPT; 306 } 307 } 308 } 309 else 310 { 311 if (!is_link_encrypted) 312 { 313 act = GATT_SEC_ENCRYPT; 314 } 315 } 316 317 } 318 319 return act ; 320 321} 322 323 324 325/******************************************************************************* 326** 327** Function gatt_get_link_encrypt_status 328** 329** Description This routine get the encryption status of the specified link 330** 331** 332** Returns tGATT_STATUS link encryption status 333** 334*******************************************************************************/ 335tGATT_STATUS gatt_get_link_encrypt_status(tGATT_TCB *p_tcb) 336{ 337 tGATT_STATUS encrypt_status = GATT_NOT_ENCRYPTED; 338 UINT8 sec_flag=0; 339 340 BTM_GetSecurityFlags(p_tcb->peer_bda, &sec_flag); 341 342 if ((sec_flag & BTM_SEC_FLAG_ENCRYPTED) && (sec_flag & BTM_SEC_FLAG_LKEY_KNOWN)) 343 { 344 encrypt_status = GATT_ENCRYPED_NO_MITM; 345 if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED) 346 encrypt_status = GATT_ENCRYPED_MITM; 347 } 348 349 GATT_TRACE_DEBUG1("gatt_get_link_encrypt_status status=0x%x",encrypt_status); 350 return encrypt_status ; 351} 352 353 354/******************************************************************************* 355** 356** Function gatt_convert_sec_action 357** 358** Description Convert GATT security action enum into equivalent BTM BLE security action enum 359** 360** Returns BOOLEAN TRUE - conversation is successful 361** 362*******************************************************************************/ 363static BOOLEAN gatt_convert_sec_action(tGATT_SEC_ACTION gatt_sec_act, tBTM_BLE_SEC_ACT *p_btm_sec_act ) 364{ 365 BOOLEAN status = TRUE; 366 switch (gatt_sec_act) 367 { 368 case GATT_SEC_ENCRYPT: 369 *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT; 370 break; 371 case GATT_SEC_ENCRYPT_NO_MITM: 372 *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_NO_MITM; 373 break; 374 case GATT_SEC_ENCRYPT_MITM: 375 *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_MITM; 376 break; 377 default: 378 status = FALSE; 379 break; 380 } 381 382 return status; 383} 384/******************************************************************************* 385** 386** Function gatt_check_enc_req 387** 388** Description check link security. 389** 390** Returns TRUE if encrypted, otherwise FALSE. 391** 392*******************************************************************************/ 393BOOLEAN gatt_security_check_start(tGATT_CLCB *p_clcb) 394{ 395 tGATT_TCB *p_tcb = p_clcb->p_tcb; 396 tGATT_SEC_ACTION gatt_sec_act; 397 tBTM_BLE_SEC_ACT btm_ble_sec_act; 398 BOOLEAN status = TRUE; 399 tBTM_STATUS btm_status; 400 401 if ( gatt_get_ch_state(p_tcb) == GATT_CH_OPEN) 402 { 403 gatt_sec_act = gatt_determine_sec_act(p_clcb); 404 gatt_set_sec_act(p_tcb, gatt_sec_act); 405 switch (gatt_sec_act ) 406 { 407 case GATT_SEC_SIGN_DATA: 408 GATT_TRACE_DEBUG0("gatt_security_check_start: Do data signing"); 409 gatt_set_ch_state(p_tcb, GATT_CH_W4_DATA_SIGN_COMP); 410 gatt_sign_data(p_clcb); 411 break; 412 case GATT_SEC_ENCRYPT: 413 case GATT_SEC_ENCRYPT_NO_MITM: 414 case GATT_SEC_ENCRYPT_MITM: 415 GATT_TRACE_DEBUG0("gatt_security_check_start: Encrypt now or key upgreade first"); 416 gatt_convert_sec_action(p_tcb->sec_act, &btm_ble_sec_act); 417 gatt_set_ch_state(p_tcb, GATT_CH_W4_SEC_COMP); 418 p_tcb->p_clcb = p_clcb; /* keep the clcb pointer in CCB */ 419 btm_status = BTM_SetEncryption(p_tcb->peer_bda, gatt_enc_cmpl_cback, &btm_ble_sec_act); 420 if ( (btm_status != BTM_SUCCESS) && (btm_status != BTM_CMD_STARTED)) 421 { 422 GATT_TRACE_ERROR1("gatt_security_check_start BTM_SetEncryption failed btm_status=%d", btm_status); 423 p_tcb->p_clcb = NULL; 424 status = FALSE; 425 } 426 break; 427 default: 428 gatt_sec_check_complete(TRUE, p_clcb); 429 break; 430 } 431 432 if (status == FALSE) 433 { 434 gatt_set_sec_act(p_tcb, GATT_SEC_NONE); 435 gatt_set_ch_state(p_tcb, GATT_CH_OPEN); 436 } 437 } 438 else 439 { 440 GATT_TRACE_ERROR0("gatt_security_check_start channel not open"); 441 status = FALSE; 442 } 443 444 return status; 445} 446 447 448#endif /* BLE_INCLUDED */ 449