1/* 2 * problem.h --- e2fsck problem error codes 3 * 4 * Copyright 1996 by Theodore Ts'o 5 * 6 * %Begin-Header% 7 * This file may be redistributed under the terms of the GNU Public 8 * License. 9 * %End-Header% 10 */ 11 12typedef __u32 problem_t; 13 14struct problem_context { 15 errcode_t errcode; 16 ext2_ino_t ino, ino2, dir; 17 struct ext2_inode *inode; 18 struct ext2_dir_entry *dirent; 19 blk64_t blk, blk2; 20 e2_blkcnt_t blkcount; 21 int group; 22 __u64 num; 23 const char *str; 24}; 25 26/* 27 * We define a set of "latch groups"; these are problems which are 28 * handled as a set. The user answers once for a particular latch 29 * group. 30 */ 31#define PR_LATCH_MASK 0x0ff0 /* Latch mask */ 32#define PR_LATCH_BLOCK 0x0010 /* Latch for illegal blocks (pass 1) */ 33#define PR_LATCH_BBLOCK 0x0020 /* Latch for bad block inode blocks (pass 1) */ 34#define PR_LATCH_IBITMAP 0x0030 /* Latch for pass 5 inode bitmap proc. */ 35#define PR_LATCH_BBITMAP 0x0040 /* Latch for pass 5 inode bitmap proc. */ 36#define PR_LATCH_RELOC 0x0050 /* Latch for superblock relocate hint */ 37#define PR_LATCH_DBLOCK 0x0060 /* Latch for pass 1b dup block headers */ 38#define PR_LATCH_LOW_DTIME 0x0070 /* Latch for pass1 orphaned list refugees */ 39#define PR_LATCH_TOOBIG 0x0080 /* Latch for file to big errors */ 40#define PR_LATCH_OPTIMIZE_DIR 0x0090 /* Latch for optimize directories */ 41#define PR_LATCH_BG_CHECKSUM 0x00A0 /* Latch for block group checksums */ 42 43#define PR_LATCH(x) ((((x) & PR_LATCH_MASK) >> 4) - 1) 44 45/* 46 * Latch group descriptor flags 47 */ 48#define PRL_YES 0x0001 /* Answer yes */ 49#define PRL_NO 0x0002 /* Answer no */ 50#define PRL_LATCHED 0x0004 /* The latch group is latched */ 51#define PRL_SUPPRESS 0x0008 /* Suppress all latch group questions */ 52 53#define PRL_VARIABLE 0x000f /* All the flags that need to be reset */ 54 55/* 56 * Pre-Pass 1 errors 57 */ 58 59/* Block bitmap not in group */ 60#define PR_0_BB_NOT_GROUP 0x000001 61 62/* Inode bitmap not in group */ 63#define PR_0_IB_NOT_GROUP 0x000002 64 65/* Inode table not in group */ 66#define PR_0_ITABLE_NOT_GROUP 0x000003 67 68/* Superblock corrupt */ 69#define PR_0_SB_CORRUPT 0x000004 70 71/* Filesystem size is wrong */ 72#define PR_0_FS_SIZE_WRONG 0x000005 73 74/* Fragments not supported */ 75#define PR_0_NO_FRAGMENTS 0x000006 76 77/* Bad blocks_per_group */ 78#define PR_0_BLOCKS_PER_GROUP 0x000007 79 80/* Bad first_data_block */ 81#define PR_0_FIRST_DATA_BLOCK 0x000008 82 83/* Adding UUID to filesystem */ 84#define PR_0_ADD_UUID 0x000009 85 86/* Relocate hint */ 87#define PR_0_RELOCATE_HINT 0x00000A 88 89/* Miscellaneous superblock corruption */ 90#define PR_0_MISC_CORRUPT_SUPER 0x00000B 91 92/* Error determing physical device size of filesystem */ 93#define PR_0_GETSIZE_ERROR 0x00000C 94 95/* Inode count in the superblock incorrect */ 96#define PR_0_INODE_COUNT_WRONG 0x00000D 97 98/* The Hurd does not support the filetype feature */ 99#define PR_0_HURD_CLEAR_FILETYPE 0x00000E 100 101/* Journal inode is invalid */ 102#define PR_0_JOURNAL_BAD_INODE 0x00000F 103 104/* The external journal has multiple filesystems (which we can't handle yet) */ 105#define PR_0_JOURNAL_UNSUPP_MULTIFS 0x000010 106 107/* Can't find external journal */ 108#define PR_0_CANT_FIND_JOURNAL 0x000011 109 110/* External journal has bad superblock */ 111#define PR_0_EXT_JOURNAL_BAD_SUPER 0x000012 112 113/* Superblock has a bad journal UUID */ 114#define PR_0_JOURNAL_BAD_UUID 0x000013 115 116/* Journal has an unknown superblock type */ 117#define PR_0_JOURNAL_UNSUPP_SUPER 0x000014 118 119/* Journal superblock is corrupt */ 120#define PR_0_JOURNAL_BAD_SUPER 0x000015 121 122/* Journal superblock is corrupt */ 123#define PR_0_JOURNAL_HAS_JOURNAL 0x000016 124 125/* Superblock has recovery flag set but no journal */ 126#define PR_0_JOURNAL_RECOVER_SET 0x000017 127 128/* Journal has data, but recovery flag is clear */ 129#define PR_0_JOURNAL_RECOVERY_CLEAR 0x000018 130 131/* Ask if we should clear the journal */ 132#define PR_0_JOURNAL_RESET_JOURNAL 0x000019 133 134/* Filesystem revision is 0, but feature flags are set */ 135#define PR_0_FS_REV_LEVEL 0x00001A 136 137/* Clearing orphan inode */ 138#define PR_0_ORPHAN_CLEAR_INODE 0x000020 139 140/* Illegal block found in orphaned inode */ 141#define PR_0_ORPHAN_ILLEGAL_BLOCK_NUM 0x000021 142 143/* Already cleared block found in orphaned inode */ 144#define PR_0_ORPHAN_ALREADY_CLEARED_BLOCK 0x000022 145 146/* Illegal orphan inode in superblock */ 147#define PR_0_ORPHAN_ILLEGAL_HEAD_INODE 0x000023 148 149/* Illegal inode in orphaned inode list */ 150#define PR_0_ORPHAN_ILLEGAL_INODE 0x000024 151 152/* Journal has unsupported read-only feature - abort */ 153#define PR_0_JOURNAL_UNSUPP_ROCOMPAT 0x000025 154 155/* Journal has unsupported incompatible feature - abort */ 156#define PR_0_JOURNAL_UNSUPP_INCOMPAT 0x000026 157 158/* Journal has unsupported version number */ 159#define PR_0_JOURNAL_UNSUPP_VERSION 0x000027 160 161/* Moving journal to hidden file */ 162#define PR_0_MOVE_JOURNAL 0x000028 163 164/* Error moving journal */ 165#define PR_0_ERR_MOVE_JOURNAL 0x000029 166 167/* Clearing V2 journal superblock */ 168#define PR_0_CLEAR_V2_JOURNAL 0x00002A 169 170/* Run journal anyway */ 171#define PR_0_JOURNAL_RUN 0x00002B 172 173/* Run journal anyway by default */ 174#define PR_0_JOURNAL_RUN_DEFAULT 0x00002C 175 176/* Backup journal inode blocks */ 177#define PR_0_BACKUP_JNL 0x00002D 178 179/* Reserved blocks w/o resize_inode */ 180#define PR_0_NONZERO_RESERVED_GDT_BLOCKS 0x00002E 181 182/* Resize_inode not enabled, but resize inode is non-zero */ 183#define PR_0_CLEAR_RESIZE_INODE 0x00002F 184 185/* Resize inode invalid */ 186#define PR_0_RESIZE_INODE_INVALID 0x000030 187 188/* Last mount time is in the future */ 189#define PR_0_FUTURE_SB_LAST_MOUNT 0x000031 190 191/* Last write time is in the future */ 192#define PR_0_FUTURE_SB_LAST_WRITE 0x000032 193 194/* Superblock hint for external journal incorrect */ 195#define PR_0_EXTERNAL_JOURNAL_HINT 0x000033 196 197/* Superblock hint for external journal incorrect */ 198#define PR_0_DIRHASH_HINT 0x000034 199 200/* Group descriptor N checksum is invalid */ 201#define PR_0_GDT_CSUM 0x000035 202 203/* Group descriptor N marked uninitialized without feature set. */ 204#define PR_0_GDT_UNINIT 0x000036 205 206/* Block bitmap is not initialised and Inode bitmap is */ 207#define PR_0_BB_UNINIT_IB_INIT 0x000037 208 209/* Group descriptor N has invalid unused inodes count. */ 210#define PR_0_GDT_ITABLE_UNUSED 0x000038 211 212/* Last group block bitmap is uninitialized. */ 213#define PR_0_BB_UNINIT_LAST 0x000039 214 215/* Journal transaction found corrupt */ 216#define PR_0_JNL_TXN_CORRUPT 0x00003A 217 218/* The test_fs filesystem flag is set and ext4 is available */ 219#define PR_0_CLEAR_TESTFS_FLAG 0x00003B 220 221/* Last mount time is in the future (fudged) */ 222#define PR_0_FUTURE_SB_LAST_MOUNT_FUDGED 0x00003C 223 224/* Last write time is in the future (fudged) */ 225#define PR_0_FUTURE_SB_LAST_WRITE_FUDGED 0x00003D 226 227/* Block group checksum (latch question) */ 228#define PR_0_GDT_CSUM_LATCH 0x00003E 229 230 231/* 232 * Pass 1 errors 233 */ 234 235/* Pass 1: Checking inodes, blocks, and sizes */ 236#define PR_1_PASS_HEADER 0x010000 237 238/* Root directory is not an inode */ 239#define PR_1_ROOT_NO_DIR 0x010001 240 241/* Root directory has dtime set */ 242#define PR_1_ROOT_DTIME 0x010002 243 244/* Reserved inode has bad mode */ 245#define PR_1_RESERVED_BAD_MODE 0x010003 246 247/* Deleted inode has zero dtime */ 248#define PR_1_ZERO_DTIME 0x010004 249 250/* Inode in use, but dtime set */ 251#define PR_1_SET_DTIME 0x010005 252 253/* Zero-length directory */ 254#define PR_1_ZERO_LENGTH_DIR 0x010006 255 256/* Block bitmap conflicts with some other fs block */ 257#define PR_1_BB_CONFLICT 0x010007 258 259/* Inode bitmap conflicts with some other fs block */ 260#define PR_1_IB_CONFLICT 0x010008 261 262/* Inode table conflicts with some other fs block */ 263#define PR_1_ITABLE_CONFLICT 0x010009 264 265/* Block bitmap is on a bad block */ 266#define PR_1_BB_BAD_BLOCK 0x01000A 267 268/* Inode bitmap is on a bad block */ 269#define PR_1_IB_BAD_BLOCK 0x01000B 270 271/* Inode has incorrect i_size */ 272#define PR_1_BAD_I_SIZE 0x01000C 273 274/* Inode has incorrect i_blocks */ 275#define PR_1_BAD_I_BLOCKS 0x01000D 276 277/* Illegal block number in inode */ 278#define PR_1_ILLEGAL_BLOCK_NUM 0x01000E 279 280/* Block number overlaps fs metadata */ 281#define PR_1_BLOCK_OVERLAPS_METADATA 0x01000F 282 283/* Inode has illegal blocks (latch question) */ 284#define PR_1_INODE_BLOCK_LATCH 0x010010 285 286/* Too many bad blocks in inode */ 287#define PR_1_TOO_MANY_BAD_BLOCKS 0x010011 288 289/* Illegal block number in bad block inode */ 290#define PR_1_BB_ILLEGAL_BLOCK_NUM 0x010012 291 292/* Bad block inode has illegal blocks (latch question) */ 293#define PR_1_INODE_BBLOCK_LATCH 0x010013 294 295/* Duplicate or bad blocks in use! */ 296#define PR_1_DUP_BLOCKS_PREENSTOP 0x010014 297 298/* Bad block used as bad block indirect block */ 299#define PR_1_BBINODE_BAD_METABLOCK 0x010015 300 301/* Inconsistency can't be fixed prompt */ 302#define PR_1_BBINODE_BAD_METABLOCK_PROMPT 0x010016 303 304/* Bad primary block */ 305#define PR_1_BAD_PRIMARY_BLOCK 0x010017 306 307/* Bad primary block prompt */ 308#define PR_1_BAD_PRIMARY_BLOCK_PROMPT 0x010018 309 310/* Bad primary superblock */ 311#define PR_1_BAD_PRIMARY_SUPERBLOCK 0x010019 312 313/* Bad primary block group descriptors */ 314#define PR_1_BAD_PRIMARY_GROUP_DESCRIPTOR 0x01001A 315 316/* Bad superblock in group */ 317#define PR_1_BAD_SUPERBLOCK 0x01001B 318 319/* Bad block group descriptors in group */ 320#define PR_1_BAD_GROUP_DESCRIPTORS 0x01001C 321 322/* Block claimed for no reason */ 323#define PR_1_PROGERR_CLAIMED_BLOCK 0x01001D 324 325/* Error allocating blocks for relocating metadata */ 326#define PR_1_RELOC_BLOCK_ALLOCATE 0x01001E 327 328/* Error allocating block buffer during relocation process */ 329#define PR_1_RELOC_MEMORY_ALLOCATE 0x01001F 330 331/* Relocating metadata group information from X to Y */ 332#define PR_1_RELOC_FROM_TO 0x010020 333 334/* Relocating metatdata group information to X */ 335#define PR_1_RELOC_TO 0x010021 336 337/* Block read error during relocation process */ 338#define PR_1_RELOC_READ_ERR 0x010022 339 340/* Block write error during relocation process */ 341#define PR_1_RELOC_WRITE_ERR 0x010023 342 343/* Error allocating inode bitmap */ 344#define PR_1_ALLOCATE_IBITMAP_ERROR 0x010024 345 346/* Error allocating block bitmap */ 347#define PR_1_ALLOCATE_BBITMAP_ERROR 0x010025 348 349/* Error allocating icount structure */ 350#define PR_1_ALLOCATE_ICOUNT 0x010026 351 352/* Error allocating dbcount */ 353#define PR_1_ALLOCATE_DBCOUNT 0x010027 354 355/* Error while scanning inodes */ 356#define PR_1_ISCAN_ERROR 0x010028 357 358/* Error while iterating over blocks */ 359#define PR_1_BLOCK_ITERATE 0x010029 360 361/* Error while storing inode count information */ 362#define PR_1_ICOUNT_STORE 0x01002A 363 364/* Error while storing directory block information */ 365#define PR_1_ADD_DBLOCK 0x01002B 366 367/* Error while reading inode (for clearing) */ 368#define PR_1_READ_INODE 0x01002C 369 370/* Suppress messages prompt */ 371#define PR_1_SUPPRESS_MESSAGES 0x01002D 372 373/* Imagic flag set on an inode when filesystem doesn't support it */ 374#define PR_1_SET_IMAGIC 0x01002F 375 376/* Immutable flag set on a device or socket inode */ 377#define PR_1_SET_IMMUTABLE 0x010030 378 379/* Compression flag set on a non-compressed filesystem */ 380#define PR_1_COMPR_SET 0x010031 381 382/* Non-zero size on on device, fifo or socket inode */ 383#define PR_1_SET_NONZSIZE 0x010032 384 385/* Filesystem revision is 0, but feature flags are set */ 386#define PR_1_FS_REV_LEVEL 0x010033 387 388/* Journal inode not in use, needs clearing */ 389#define PR_1_JOURNAL_INODE_NOT_CLEAR 0x010034 390 391/* Journal inode has wrong mode */ 392#define PR_1_JOURNAL_BAD_MODE 0x010035 393 394/* Inode that was part of orphan linked list */ 395#define PR_1_LOW_DTIME 0x010036 396 397/* Latch question which asks how to deal with low dtime inodes */ 398#define PR_1_ORPHAN_LIST_REFUGEES 0x010037 399 400/* Error allocating refcount structure */ 401#define PR_1_ALLOCATE_REFCOUNT 0x010038 402 403/* Error reading Extended Attribute block */ 404#define PR_1_READ_EA_BLOCK 0x010039 405 406/* Invalid Extended Attribute block */ 407#define PR_1_BAD_EA_BLOCK 0x01003A 408 409/* Error reading Extended Attribute block while fixing refcount -- abort */ 410#define PR_1_EXTATTR_READ_ABORT 0x01003B 411 412/* Extended attribute reference count incorrect */ 413#define PR_1_EXTATTR_REFCOUNT 0x01003C 414 415/* Error writing Extended Attribute block while fixing refcount */ 416#define PR_1_EXTATTR_WRITE_ABORT 0x01003D 417 418/* Multiple EA blocks not supported */ 419#define PR_1_EA_MULTI_BLOCK 0x01003E 420 421/* Error allocating EA region allocation structure */ 422#define PR_1_EA_ALLOC_REGION_ABORT 0x01003F 423 424/* Error EA allocation collision */ 425#define PR_1_EA_ALLOC_COLLISION 0x010040 426 427/* Bad extended attribute name */ 428#define PR_1_EA_BAD_NAME 0x010041 429 430/* Bad extended attribute value */ 431#define PR_1_EA_BAD_VALUE 0x010042 432 433/* Inode too big (latch question) */ 434#define PR_1_INODE_TOOBIG 0x010043 435 436/* Directory too big */ 437#define PR_1_TOOBIG_DIR 0x010044 438 439/* Regular file too big */ 440#define PR_1_TOOBIG_REG 0x010045 441 442/* Symlink too big */ 443#define PR_1_TOOBIG_SYMLINK 0x010046 444 445/* INDEX_FL flag set on a non-HTREE filesystem */ 446#define PR_1_HTREE_SET 0x010047 447 448/* INDEX_FL flag set on a non-directory */ 449#define PR_1_HTREE_NODIR 0x010048 450 451/* Invalid root node in HTREE directory */ 452#define PR_1_HTREE_BADROOT 0x010049 453 454/* Unsupported hash version in HTREE directory */ 455#define PR_1_HTREE_HASHV 0x01004A 456 457/* Incompatible flag in HTREE root node */ 458#define PR_1_HTREE_INCOMPAT 0x01004B 459 460/* HTREE too deep */ 461#define PR_1_HTREE_DEPTH 0x01004C 462 463/* Bad block has indirect block that conflicts with filesystem block */ 464#define PR_1_BB_FS_BLOCK 0x01004D 465 466/* Resize inode failed */ 467#define PR_1_RESIZE_INODE_CREATE 0x01004E 468 469/* inode->i_size is too long */ 470#define PR_1_EXTRA_ISIZE 0x01004F 471 472/* attribute name is too long */ 473#define PR_1_ATTR_NAME_LEN 0x010050 474 475/* wrong EA value offset */ 476#define PR_1_ATTR_VALUE_OFFSET 0x010051 477 478/* wrong EA blocknumber */ 479#define PR_1_ATTR_VALUE_BLOCK 0x010052 480 481/* wrong EA value size */ 482#define PR_1_ATTR_VALUE_SIZE 0x010053 483 484/* wrong EA hash value */ 485#define PR_1_ATTR_HASH 0x010054 486 487/* inode appears to be a directory */ 488#define PR_1_TREAT_AS_DIRECTORY 0x010055 489 490/* Error while reading extent tree */ 491#define PR_1_READ_EXTENT 0x010056 492 493/* Failure to iterate extents */ 494#define PR_1_EXTENT_ITERATE_FAILURE 0x010057 495 496/* Bad starting block in extent */ 497#define PR_1_EXTENT_BAD_START_BLK 0x010058 498 499/* Extent ends beyond filesystem */ 500#define PR_1_EXTENT_ENDS_BEYOND 0x010059 501 502/* EXTENTS_FL flag set on a non-extents capable filesystem */ 503#define PR_1_EXTENTS_SET 0x01005A 504 505/* inode has extents, superblock missing INCOMPAT_EXTENTS feature */ 506#define PR_1_EXTENT_FEATURE 0x01005B 507 508/* inode missing EXTENTS_FL, but is an extent inode */ 509#define PR_1_UNSET_EXTENT_FL 0x01005C 510 511/* Fast symlink has EXTENTS_FL set */ 512#define PR_1_FAST_SYMLINK_EXTENT_FL 0x01005D 513 514/* Extents are out of order */ 515#define PR_1_OUT_OF_ORDER_EXTENTS 0x01005E 516 517/* Extent node header invalid */ 518#define PR_1_EXTENT_HEADER_INVALID 0x01005F 519 520/* EOFBLOCKS flag set when not necessary */ 521#define PR_1_EOFBLOCKS_FL_SET 0x010060 522 523/* 524 * Pass 1b errors 525 */ 526 527/* Pass 1B: Rescan for duplicate/bad blocks */ 528#define PR_1B_PASS_HEADER 0x011000 529 530/* Duplicate/bad block(s) header */ 531#define PR_1B_DUP_BLOCK_HEADER 0x011001 532 533/* Duplicate/bad block(s) in inode */ 534#define PR_1B_DUP_BLOCK 0x011002 535 536/* Duplicate/bad block(s) end */ 537#define PR_1B_DUP_BLOCK_END 0x011003 538 539/* Error while scanning inodes */ 540#define PR_1B_ISCAN_ERROR 0x011004 541 542/* Error allocating inode bitmap */ 543#define PR_1B_ALLOCATE_IBITMAP_ERROR 0x011005 544 545/* Error while iterating over blocks */ 546#define PR_1B_BLOCK_ITERATE 0x011006 547 548/* Error adjusting EA refcount */ 549#define PR_1B_ADJ_EA_REFCOUNT 0x011007 550 551 552/* Pass 1C: Scan directories for inodes with dup blocks. */ 553#define PR_1C_PASS_HEADER 0x012000 554 555 556/* Pass 1D: Reconciling duplicate blocks */ 557#define PR_1D_PASS_HEADER 0x013000 558 559/* File has duplicate blocks */ 560#define PR_1D_DUP_FILE 0x013001 561 562/* List of files sharing duplicate blocks */ 563#define PR_1D_DUP_FILE_LIST 0x013002 564 565/* File sharing blocks with filesystem metadata */ 566#define PR_1D_SHARE_METADATA 0x013003 567 568/* Report of how many duplicate/bad inodes */ 569#define PR_1D_NUM_DUP_INODES 0x013004 570 571/* Duplicated blocks already reassigned or cloned. */ 572#define PR_1D_DUP_BLOCKS_DEALT 0x013005 573 574/* Clone duplicate/bad blocks? */ 575#define PR_1D_CLONE_QUESTION 0x013006 576 577/* Delete file? */ 578#define PR_1D_DELETE_QUESTION 0x013007 579 580/* Couldn't clone file (error) */ 581#define PR_1D_CLONE_ERROR 0x013008 582 583/* 584 * Pass 2 errors 585 */ 586 587/* Pass 2: Checking directory structure */ 588#define PR_2_PASS_HEADER 0x020000 589 590/* Bad inode number for '.' */ 591#define PR_2_BAD_INODE_DOT 0x020001 592 593/* Directory entry has bad inode number */ 594#define PR_2_BAD_INO 0x020002 595 596/* Directory entry has deleted or unused inode */ 597#define PR_2_UNUSED_INODE 0x020003 598 599/* Directry entry is link to '.' */ 600#define PR_2_LINK_DOT 0x020004 601 602/* Directory entry points to inode now located in a bad block */ 603#define PR_2_BB_INODE 0x020005 604 605/* Directory entry contains a link to a directory */ 606#define PR_2_LINK_DIR 0x020006 607 608/* Directory entry contains a link to the root directry */ 609#define PR_2_LINK_ROOT 0x020007 610 611/* Directory entry has illegal characters in its name */ 612#define PR_2_BAD_NAME 0x020008 613 614/* Missing '.' in directory inode */ 615#define PR_2_MISSING_DOT 0x020009 616 617/* Missing '..' in directory inode */ 618#define PR_2_MISSING_DOT_DOT 0x02000A 619 620/* First entry in directory inode doesn't contain '.' */ 621#define PR_2_1ST_NOT_DOT 0x02000B 622 623/* Second entry in directory inode doesn't contain '..' */ 624#define PR_2_2ND_NOT_DOT_DOT 0x02000C 625 626/* i_faddr should be zero */ 627#define PR_2_FADDR_ZERO 0x02000D 628 629/* i_file_acl should be zero */ 630#define PR_2_FILE_ACL_ZERO 0x02000E 631 632/* i_dir_acl should be zero */ 633#define PR_2_DIR_ACL_ZERO 0x02000F 634 635/* i_frag should be zero */ 636#define PR_2_FRAG_ZERO 0x020010 637 638/* i_fsize should be zero */ 639#define PR_2_FSIZE_ZERO 0x020011 640 641/* inode has bad mode */ 642#define PR_2_BAD_MODE 0x020012 643 644/* directory corrupted */ 645#define PR_2_DIR_CORRUPTED 0x020013 646 647/* filename too long */ 648#define PR_2_FILENAME_LONG 0x020014 649 650/* Directory inode has a missing block (hole) */ 651#define PR_2_DIRECTORY_HOLE 0x020015 652 653/* '.' is not NULL terminated */ 654#define PR_2_DOT_NULL_TERM 0x020016 655 656/* '..' is not NULL terminated */ 657#define PR_2_DOT_DOT_NULL_TERM 0x020017 658 659/* Illegal character device in inode */ 660#define PR_2_BAD_CHAR_DEV 0x020018 661 662/* Illegal block device in inode */ 663#define PR_2_BAD_BLOCK_DEV 0x020019 664 665/* Duplicate '.' entry */ 666#define PR_2_DUP_DOT 0x02001A 667 668/* Duplicate '..' entry */ 669#define PR_2_DUP_DOT_DOT 0x02001B 670 671/* Internal error: couldn't find dir_info */ 672#define PR_2_NO_DIRINFO 0x02001C 673 674/* Final rec_len is wrong */ 675#define PR_2_FINAL_RECLEN 0x02001D 676 677/* Error allocating icount structure */ 678#define PR_2_ALLOCATE_ICOUNT 0x02001E 679 680/* Error iterating over directory blocks */ 681#define PR_2_DBLIST_ITERATE 0x02001F 682 683/* Error reading directory block */ 684#define PR_2_READ_DIRBLOCK 0x020020 685 686/* Error writing directory block */ 687#define PR_2_WRITE_DIRBLOCK 0x020021 688 689/* Error allocating new directory block */ 690#define PR_2_ALLOC_DIRBOCK 0x020022 691 692/* Error deallocating inode */ 693#define PR_2_DEALLOC_INODE 0x020023 694 695/* Directory entry for '.' is big. Split? */ 696#define PR_2_SPLIT_DOT 0x020024 697 698/* Illegal FIFO */ 699#define PR_2_BAD_FIFO 0x020025 700 701/* Illegal socket */ 702#define PR_2_BAD_SOCKET 0x020026 703 704/* Directory filetype not set */ 705#define PR_2_SET_FILETYPE 0x020027 706 707/* Directory filetype incorrect */ 708#define PR_2_BAD_FILETYPE 0x020028 709 710/* Directory filetype set when it shouldn't be */ 711#define PR_2_CLEAR_FILETYPE 0x020029 712 713/* Directory filename can't be zero-length */ 714#define PR_2_NULL_NAME 0x020030 715 716/* Invalid symlink */ 717#define PR_2_INVALID_SYMLINK 0x020031 718 719/* i_file_acl (extended attribute) is bad */ 720#define PR_2_FILE_ACL_BAD 0x020032 721 722/* Filesystem contains large files, but has no such flag in sb */ 723#define PR_2_FEATURE_LARGE_FILES 0x020033 724 725/* Node in HTREE directory not referenced */ 726#define PR_2_HTREE_NOTREF 0x020034 727 728/* Node in HTREE directory referenced twice */ 729#define PR_2_HTREE_DUPREF 0x020035 730 731/* Node in HTREE directory has bad min hash */ 732#define PR_2_HTREE_MIN_HASH 0x020036 733 734/* Node in HTREE directory has bad max hash */ 735#define PR_2_HTREE_MAX_HASH 0x020037 736 737/* Clear invalid HTREE directory */ 738#define PR_2_HTREE_CLEAR 0x020038 739 740/* Clear the htree flag forcibly */ 741/* #define PR_2_HTREE_FCLR 0x020039 */ 742 743/* Bad block in htree interior node */ 744#define PR_2_HTREE_BADBLK 0x02003A 745 746/* Error adjusting EA refcount */ 747#define PR_2_ADJ_EA_REFCOUNT 0x02003B 748 749/* Invalid HTREE root node */ 750#define PR_2_HTREE_BAD_ROOT 0x02003C 751 752/* Invalid HTREE limit */ 753#define PR_2_HTREE_BAD_LIMIT 0x02003D 754 755/* Invalid HTREE count */ 756#define PR_2_HTREE_BAD_COUNT 0x02003E 757 758/* HTREE interior node has out-of-order hashes in table */ 759#define PR_2_HTREE_HASH_ORDER 0x02003F 760 761/* Node in HTREE directory has bad depth */ 762#define PR_2_HTREE_BAD_DEPTH 0x020040 763 764/* Duplicate directory entry found */ 765#define PR_2_DUPLICATE_DIRENT 0x020041 766 767/* Non-unique filename found */ 768#define PR_2_NON_UNIQUE_FILE 0x020042 769 770/* Duplicate directory entry found */ 771#define PR_2_REPORT_DUP_DIRENT 0x020043 772 773/* i_blocks_hi should be zero */ 774#define PR_2_BLOCKS_HI_ZERO 0x020044 775 776/* Unexpected HTREE block */ 777#define PR_2_UNEXPECTED_HTREE_BLOCK 0x020045 778 779/* Inode found in group where _INODE_UNINIT is set */ 780#define PR_2_INOREF_BG_INO_UNINIT 0x020046 781 782/* Inode found in group unused inodes area */ 783#define PR_2_INOREF_IN_UNUSED 0x020047 784 785/* i_file_acl_hi should be zero */ 786#define PR_2_I_FILE_ACL_HI_ZERO 0x020048 787 788/* 789 * Pass 3 errors 790 */ 791 792/* Pass 3: Checking directory connectivity */ 793#define PR_3_PASS_HEADER 0x030000 794 795/* Root inode not allocated */ 796#define PR_3_NO_ROOT_INODE 0x030001 797 798/* No room in lost+found */ 799#define PR_3_EXPAND_LF_DIR 0x030002 800 801/* Unconnected directory inode */ 802#define PR_3_UNCONNECTED_DIR 0x030003 803 804/* /lost+found not found */ 805#define PR_3_NO_LF_DIR 0x030004 806 807/* .. entry is incorrect */ 808#define PR_3_BAD_DOT_DOT 0x030005 809 810/* Bad or non-existent /lost+found. Cannot reconnect */ 811#define PR_3_NO_LPF 0x030006 812 813/* Could not expand /lost+found */ 814#define PR_3_CANT_EXPAND_LPF 0x030007 815 816/* Could not reconnect inode */ 817#define PR_3_CANT_RECONNECT 0x030008 818 819/* Error while trying to find /lost+found */ 820#define PR_3_ERR_FIND_LPF 0x030009 821 822/* Error in ext2fs_new_block while creating /lost+found */ 823#define PR_3_ERR_LPF_NEW_BLOCK 0x03000A 824 825/* Error in ext2fs_new_inode while creating /lost+found */ 826#define PR_3_ERR_LPF_NEW_INODE 0x03000B 827 828/* Error in ext2fs_new_dir_block while creating /lost+found */ 829#define PR_3_ERR_LPF_NEW_DIR_BLOCK 0x03000C 830 831/* Error while writing directory block for /lost+found */ 832#define PR_3_ERR_LPF_WRITE_BLOCK 0x03000D 833 834/* Error while adjusting inode count */ 835#define PR_3_ADJUST_INODE 0x03000E 836 837/* Couldn't fix parent directory -- error */ 838#define PR_3_FIX_PARENT_ERR 0x03000F 839 840/* Couldn't fix parent directory -- couldn't find it */ 841#define PR_3_FIX_PARENT_NOFIND 0x030010 842 843/* Error allocating inode bitmap */ 844#define PR_3_ALLOCATE_IBITMAP_ERROR 0x030011 845 846/* Error creating root directory */ 847#define PR_3_CREATE_ROOT_ERROR 0x030012 848 849/* Error creating lost and found directory */ 850#define PR_3_CREATE_LPF_ERROR 0x030013 851 852/* Root inode is not directory; aborting */ 853#define PR_3_ROOT_NOT_DIR_ABORT 0x030014 854 855/* Cannot proceed without a root inode. */ 856#define PR_3_NO_ROOT_INODE_ABORT 0x030015 857 858/* Internal error: couldn't find dir_info */ 859#define PR_3_NO_DIRINFO 0x030016 860 861/* Lost+found is not a directory */ 862#define PR_3_LPF_NOTDIR 0x030017 863 864/* 865 * Pass 3a --- rehashing diretories 866 */ 867/* Pass 3a: Reindexing directories */ 868#define PR_3A_PASS_HEADER 0x031000 869 870/* Error iterating over directories */ 871#define PR_3A_OPTIMIZE_ITER 0x031001 872 873/* Error rehash directory */ 874#define PR_3A_OPTIMIZE_DIR_ERR 0x031002 875 876/* Rehashing dir header */ 877#define PR_3A_OPTIMIZE_DIR_HEADER 0x031003 878 879/* Rehashing directory %d */ 880#define PR_3A_OPTIMIZE_DIR 0x031004 881 882/* Rehashing dir end */ 883#define PR_3A_OPTIMIZE_DIR_END 0x031005 884 885/* 886 * Pass 4 errors 887 */ 888 889/* Pass 4: Checking reference counts */ 890#define PR_4_PASS_HEADER 0x040000 891 892/* Unattached zero-length inode */ 893#define PR_4_ZERO_LEN_INODE 0x040001 894 895/* Unattached inode */ 896#define PR_4_UNATTACHED_INODE 0x040002 897 898/* Inode ref count wrong */ 899#define PR_4_BAD_REF_COUNT 0x040003 900 901/* Inconsistent inode count information cached */ 902#define PR_4_INCONSISTENT_COUNT 0x040004 903 904/* 905 * Pass 5 errors 906 */ 907 908/* Pass 5: Checking group summary information */ 909#define PR_5_PASS_HEADER 0x050000 910 911/* Padding at end of inode bitmap is not set. */ 912#define PR_5_INODE_BMAP_PADDING 0x050001 913 914/* Padding at end of block bitmap is not set. */ 915#define PR_5_BLOCK_BMAP_PADDING 0x050002 916 917/* Block bitmap differences header */ 918#define PR_5_BLOCK_BITMAP_HEADER 0x050003 919 920/* Block not used, but marked in bitmap */ 921#define PR_5_BLOCK_UNUSED 0x050004 922 923/* Block used, but not marked used in bitmap */ 924#define PR_5_BLOCK_USED 0x050005 925 926/* Block bitmap differences end */ 927#define PR_5_BLOCK_BITMAP_END 0x050006 928 929/* Inode bitmap differences header */ 930#define PR_5_INODE_BITMAP_HEADER 0x050007 931 932/* Inode not used, but marked in bitmap */ 933#define PR_5_INODE_UNUSED 0x050008 934 935/* Inode used, but not marked used in bitmap */ 936#define PR_5_INODE_USED 0x050009 937 938/* Inode bitmap differences end */ 939#define PR_5_INODE_BITMAP_END 0x05000A 940 941/* Free inodes count for group wrong */ 942#define PR_5_FREE_INODE_COUNT_GROUP 0x05000B 943 944/* Directories count for group wrong */ 945#define PR_5_FREE_DIR_COUNT_GROUP 0x05000C 946 947/* Free inodes count wrong */ 948#define PR_5_FREE_INODE_COUNT 0x05000D 949 950/* Free blocks count for group wrong */ 951#define PR_5_FREE_BLOCK_COUNT_GROUP 0x05000E 952 953/* Free blocks count wrong */ 954#define PR_5_FREE_BLOCK_COUNT 0x05000F 955 956/* Programming error: bitmap endpoints don't match */ 957#define PR_5_BMAP_ENDPOINTS 0x050010 958 959/* Internal error: fudging end of bitmap */ 960#define PR_5_FUDGE_BITMAP_ERROR 0x050011 961 962/* Error copying in replacement inode bitmap */ 963#define PR_5_COPY_IBITMAP_ERROR 0x050012 964 965/* Error copying in replacement block bitmap */ 966#define PR_5_COPY_BBITMAP_ERROR 0x050013 967 968/* Block range not used, but marked in bitmap */ 969#define PR_5_BLOCK_RANGE_UNUSED 0x050014 970 971/* Block range used, but not marked used in bitmap */ 972#define PR_5_BLOCK_RANGE_USED 0x050015 973 974/* Inode range not used, but marked in bitmap */ 975#define PR_5_INODE_RANGE_UNUSED 0x050016 976 977/* Inode rangeused, but not marked used in bitmap */ 978#define PR_5_INODE_RANGE_USED 0x050017 979 980/* Block in use but group is marked BLOCK_UNINIT */ 981#define PR_5_BLOCK_UNINIT 0x050018 982 983/* Inode in use but group is marked INODE_UNINIT */ 984#define PR_5_INODE_UNINIT 0x050019 985 986/* 987 * Post-Pass 5 errors 988 */ 989 990/* Recreate the journal if E2F_FLAG_JOURNAL_INODE flag is set */ 991#define PR_6_RECREATE_JOURNAL 0x060001 992 993/* 994 * Function declarations 995 */ 996int fix_problem(e2fsck_t ctx, problem_t code, struct problem_context *pctx); 997int end_problem_latch(e2fsck_t ctx, int mask); 998int set_latch_flags(int mask, int setflags, int clearflags); 999int get_latch_flags(int mask, int *value); 1000void clear_problem_context(struct problem_context *pctx); 1001 1002/* message.c */ 1003void print_e2fsck_message(e2fsck_t ctx, const char *msg, 1004 struct problem_context *pctx, int first, 1005 int recurse); 1006 1007