Cross Reference: /external/wpa_supplicant_8/wpa_supplicant/p2p

History log of /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
Revision	Date	Author	Comments (<<< Hide modified files) (Show modified files >>>)
444d567b27731d8572ef37697dd12fd1c37c2f24	01-Apr-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit 17b8995cf5813d7c027cd7a6884700e791d72392 17b8995 Interworking: Try to use same BSS entry for storing GAS results 3db5439 Optimize Extended Capabilities element to be of minimal length 8cd6b7b hostapd/wpa_s: Use driver's extended capabilities acb5464 Add ctrl_iface command FLUSH for clearing wpa_supplicant state 97236ce WPS: Skip rescanning after provisioning if AP was configured 4342326 Add ignore_old_scan_res configuration parameter 9599ccc WPS: Clear after_wps on new WPS connection 702621e WPS: Use latest updated BSS entry if multiple BSSID matches found ab547b5 WPS: Add more helpful debug for invalid WPS_REG command parsing a679c0f WPS: Allow hostapd process to control independent WPS interfaces ccdff94 WPS AP: Add support for reconfiguration with in-memory config 8970bae nl80211: Use nla_nest_start/end instead of nla_put_nested 558d69e P2P: Omit P2P Group Info in case of no connected peers 65a32cd AP: Fix infinite loop in WPA state machine when out of random bytes a5f61b2 Fix OLBC non-HT AP detection to check channel 69554d7 ap_list: Remove unused functions 08c99ca ap_list: Remove unused iteration list pointers 6b16917 ap_list: Remove unused fields 66f1f75 P2P: Fix provision discovery response handling in some cases 2f9b66d Extend ROAM command to handle multiple SSIDs per BSS Change-Id: I46002b1d3bbf6e376c2ae09bcb2c824c54805bbd Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
37d4d6a4efea4ef4f864347ac8ed8d62a9e19f90	18-Mar-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit 52728dcd25b5074fb7c0493a8155f096089ad6d0 P2P: Stop P2P_PD_DURING_FIND wait on PD Response RX P2P: Postpone P2P scan only if station mode scan is pending Use special scan result processing steps only on requesting interface P2P: Re-start P2P operation if station mode scanning is stopped P2P: Use common function for re-starting P2P scan after station scan Change-Id: I62bb738a912483647606de1a5bd5357346ebd8f9 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
700a137ab366edc72e371da68ba187b4717ee660	15-Mar-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit 565110cd554801fa301c55010b3e9e14f43d7973 nl80211: Include interface name in more debug prints Convert WPS NFC python scripts from using wpactrl to wpaspy wpa_supplicant: Fix lookup of cached PMKSA Add capability flag for IBSS and add get_capability modes hostapd: Fix client reassociation after disconnect due to ACK failure Fix build with CONFIG_NO_CONFIG_BLOBS Fix build without CONFIG_CTRL_IFACE or CONFIG_NO_STDOUT_DEBUG libtommath: Avoid a compiler warning on unused variable libtommath: Condition fast_s_mp_mul_digs() on LTM_FAST P2P: Remove persistent group peer if it rejects invitation P2P: Allow shared interface channel preference to be ignored P2P: Fix shared frequency preference for concurrent operations P2P: Use best-overall channel in p2p_reselect_channel() P2P: Allow all channels for multi-channel concurrency (no negotiation) TDLS: Disable link to existing peer with lower address Fix compiler warning when CONFIG_IEEE80211R is not included WPS NFC: Fix build without CONFIG_WPS_ER FT: Add support for IEEE 802.11r with driver-based SME Change-Id: I1d5ced870c33d5cb73ecc6f04e272a3cf50f344a Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
2f023193a0fd630eb82ce6381b80911ad5a3462f	12-Mar-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit f46fc73a3f8d0eeb1b43d17769464884f467ac47 P2P: Add a peer entry based on Association Request frame P2P: Clear p2p_in_provisioning flag on group removal Allow SME SA Query to be used by all drivers Android: Sync makefile changes for HT/VHT overrides wpa_supplicant: Support VHT capability overrides wpa_supplicant: Parse int values in different bases and reject invalid wpa_supplicant: Reschedule sched scan after network change Remove unnecessary local variable wpa_supplicant: Handle enabling of one or all networks equally wpa_supplicant: Save prev_sched_ssid only if needed wpa_supplicant: Do not allow too short sched scan nl80211: Use helper function for phy_info_freqs() nl80211: Split phy_info_band() into smaller helper functions nl80211: Use helper function for phy_info_handler() nl80211: Split wiphy_info_handler() into smaller helper functions nl80211: Support splitting wiphy information in dumps Synchronize with wireless-testing.git include/uapi/linux/nl80211.h SAE: Add forgotten commit element validation step for FFC groups SAE: Move commit element validation steps into single location Change-Id: I369b6493f03714f6cfb4ed4a8c10ee6e6e71c1f8 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
7a5e50a0554bee77a9da492ea3d86f46147f1671	05-Mar-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit 77e4e85321a0a1255901914d5de916aba050f9e1 P2P: Mark peer authorized for persistent group invitation P2P: Indicate frequency for upper layer invitation processing Allow wpa_supplicant AP mode to configure Beacon interval P2P: Use peer's channel list to limit GO freq on invitation P2P: Allow P2P client to specify preferred group channel P2P: Use shared function for setting up frequencies P2P: Allow all channels in case of multi channel concurrency hostapd: Make VHT IE struct more expressive Change-Id: I6d86d98a10a1a699bb464c5b916ebf21f626558b Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
f86232838cf712377867cb42417c1613ab5dc425	20-Feb-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit b618a469c42120e984ab1c85ed6058504d1fca78 Author: Jouni Malinen <jouni@qca.qualcomm.com> Date: Sat Feb 16 19:54:09 2013 +0200 Interworking: Select highest priority cred if multiple matches Interworking: Select highest priority cred if multiple matches GAS server: Fix a regression in GAS server callback hostapd: Fix Max SP Length derivation from QoS Info nl80211: Configure STA Capabilities and Extended Capabilities Synchronize with wireless-testing.git include/uapi/linux/nl80211.h WPS: Fix build without CONFIG_WPS_NFC WPS: Add support for NFC handover select generation with wpa_supplicant WPS: Update NFC connection handover documentation WPS: Add support for config token generation with wpa_supplicant WPS: Allow password token to be written with nfcpy WPS: Use pre-configured NFC password token instead of overriding it TDLS: Pass peer's Capability and Ext Capability info during sta_add TDLS: Pass peer's HT Capability and QOS information during sta_add nl80211: Add debug prints for STA add/set operations TDLS: Fix add/set STA operation Synchronize with wireless-testing.git include/uapi/linux/nl80211.h WPS: Allow Device Password to be changed from M1 to M2 WPS: Fix wps_reg nfc-pw option TDLS: Tear down peers when disconnecting from the AP P2P: Do not use old scan result data for peer discovery Use more accurate timestamps for scan results P2P: Postpone P2P-DEVICE-FOUND if config_methods not known P2P: Do not allow peer update to clear config_methods WPS: Report NFC connection handover completion differently P2P: Avoid concurrent scans during all steps of group formation P2P: Cancel group formation timeout on group removal (on client) WPS: Change listen time to match nfcpy default (250 ms) WPS: Report only the carrier record from NFC to wpa_supplicant WPS: Fetch only the carrier record from wpa_supplicant for NFC WPS: Update nfcpy script to support AP mode NFC connection handover WPS: Add command for fetching carrier record for NFC handover WPS: Clean up debug prints with nfcpy WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy WPS: Use alternating poll/listen for NFC peer discovery with nfcpy WPS: Configure logging to show nfcpy log message WPS: Add an example python script for NFC operations with hostapd hostapd: Do not change HT40 capability due to OBSS scan dbus: Add missing signal description for WPS (7) EAP peer: Add Session-Id derivation to more EAP methods EAP peer: Add Session-Id derivation EAP-IKEV2 server: Fix invalid memory freeing operation eap_proxy: Add a dummy implementation for compilation testing eap_proxy: Add mechanism for allowing EAP methods to be offloaded Android: Allow setgroups to be overridden from build configuration P2P: Send p2p_stop_find event on failure to start pending p2p_find P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled Capability matching for 60 GHz band nl80211: Add ctrl_iface message for AP mode connection rejection P2P: Allow local configuration to use 5 GHz band 40 MHz channels Fix BSS RANGE command for no exact id match cases Change-Id: Iac9284bba31db40911aecc3adf2843c9b1576db1 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
4b9d52f502481b258fec743c03a5e957e5605afc	06-Feb-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit cc03d0fef3bf5913f8e11b7e998c10bf36a3c07f Author: Amar Singhal <asinghal@qca.qualcomm.com> Date: Wed Feb 6 00:31:34 2013 +0200 Add "BSS LAST ..." command - Add "BSS LAST ..." command - HS 2.0: Fix IE buffer length for extra scan IEs - TDLS: Several fixes - P2P: Fix P2P-GROUP-STARTED event for p2p_connect-join - P2P: Fix Action frame processing if Interworking is enabled - wpa_supplicant: Fix access to the freed memory when removing all networks - Add driver for OpenBSD net80211 layer - Make wpas_select_network_from_last_scan() static - wpa_supplicant: Implement fast-associate on SelectNetwork - Update scan interval gracefully - eloop: Add a timer cancel that returns the remaining time - nl80211: Do not use void pointer for driver_ops used internally - hostapd: Fix crash when scan fails Change-Id: I083747a0b1f7000730a9ab3ea80f3ee7e6247181 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
a54fa5fb807eaeff45464139b5a7759f060cec68	15-Jan-2013	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit dc013f1e37df3462085cf01a13f0c432f146ad7a Author: Jouni Malinen <jouni@qca.qualcomm.com> Date: Tue Jan 15 12:03:29 2013 +0200 eapol_test: Remove unnecessary header file inclusion - P2P: Send P2P-FIND-STOPPED event in the new continue-search states - P2P: Add some more details on Service Query TLV format - P2P: Use the same Dialog Token value for every GO Negotiation retry - P2P: Publish more connected clients info in Probe Response frames - P2P: Fix some memory leaks in p2p_add_device() - P2P: Use the same Dialog Token value for every PD retry - P2P: Document operating channel selection functions - P2P: Always re-select operating channel if not hard coded - P2P: Do not allow re-selection of GO channel if forced_freq in use - P2P: Set FORCE_FREQ flag as part of p2p_prepare_channel() - P2P: Share a single function for GO channel selection - P2P: Prefer operating channels where HT40 is possible - P2P: Be more careful with wpa_config_update_psk() call - P2P: Allow PSK to be used instead of passphrase for persistent GO - P2P: Consider age for the P2P scan results - Move some P2P offchannel operations to offchannel.c - P2P: Add more complete description of p2p_cancel - P2P: Allow p2p_cancel to be used to stop p2p_connect-join operation - Interworking changes - WNM changes - WPS changes - SAE changes Change-Id: I38b847d3460066cc58aecbcf67266bfcff1d344e Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
d5e4923d04122f81300fa68fb07d64ede28fd44d	04-Dec-2012	Dmitry Shmidt <dimitrysh@google.com>	Accumulative patch from commit f5f37d3a4fc2df2a24676b4f95afca15ed793cba Author: Jouni Malinen <j@w1.fi> Date: Sun Nov 25 22:05:32 2012 +0200 Fix REAUTHENTICATE command after PMKSA caching The current PMKSA cache entry needs to be clear to allow EAPOL reauthentication to be started in case this association used PMKSA caching. - Remove old WPS_OOB NCF - WPS: Add preliminary NFC connection handover support for Enrollee - WPS: Reenable the networks disabled during wpa_wpas_reassoc - P2P: Avoid multi-channel scans when they are not needed - P2P: Allow discoverable interval for p2p_find to be configured - P2P: Allow all channels with multi-channel concurrency - Bonjour changes - Remove disassociate - HS 2.0 changes - Add preliminary support for using SQLite for eap_user database - Add SAE support - Add disallow_aps parameter to disallow BSSIDs/SSIDs Change-Id: I85358a05b39d46b8db49acdad667e771c580b05c Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
12b1cd9e151d1e5c4d35aa38531f38b4ef5cc805	08-Oct-2012	Jeff Johnson <jjohnson@codeaurora.org>	Support conc_pref when use_p2p_group_interface=0 The original implementation of wpas_p2p_handle_frequency_conflicts() only works correctly when P2P groups use a separate interface (i.e. use_p2p_group_interface=1). Update the implementation so that it also works when the device interfaces is used (i.e. use_p2p_group_interface=0). Bug: 7290509 Change-Id: Icbc489125c5b7bd6e174d6aecd53555cdc9ad99d /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
81931b8bb302c38828763358f9e15af2b22c52c6	17-Oct-2012	Irfan Sheriff <isheriff@google.com>	Increase channel delay to 100ms There is an inherent flaw in the p2p protocol design where an ACK loss right before channel switch leads to peers being out of sync. A work around of 50ms was added persistent case, but it turns out in heavy lossy conditions that is not enough. Increase it to 100ms. Experimental evaluation showed 100ms improves the reliability of p2p persistence reinvocation. Bug: 7359500 Change-Id: I73ab1b64e32b87101e95b0e487c90818c2c0aaf3 /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
2c5b17df4c29abdf11a85216c2f6272af796c576	14-Oct-2012	Jouni Malinen <j@w1.fi>	P2P: Improve robustness against lost ctrl::ack P2P includes two use cases where one of the devices is going to start a group and likely change channels immediately after processing a frame. This operation may be fast enough to make the device leave the current channel before the peer has completed layer 2 retransmission of the frame in case the ctrl::ack frame was lost. This can result in the peer not getting TX status success notification. For GO Negotiation Confirm frame, p2p_go_neg_conf_cb() has a workaround that ignores the TX status failure and will continue with the group formation with the assumption that the peer actually received the frame even though we did not receive ctrl::ack. For Invitation Response frame to re-invoke a persistent group, no such workaround is used in p2p_invitation_resp_cb(). Consequently, TX status failure due to lost ctrl::ack frame results in one of the peers not starting the group. Increase the likelihood of layer 2 retransmission getting acknowledged and ctrl::ack being received by waiting a short duration after having processed the GO Negotiation Confirm and Invitation Response frames for the re-invocation case. For the former, use 20 ms wait since this case has been worked around in deployed devices. For the latter, use 50 ms wait to get even higher likelihood of getting ctrl::ack through since deployed devices (and the current wpa_supplicant implementation) do not have a workaround to ignore TX status failure. 20 ms is long enough to include at least couple of retries and that should increase likelihood of getting ctrl::ack through quite a bit. The longer 50 ms wait is likely to include full set of layer 2 retries. Bug: 7282991 Change-Id: If063895046ff42fb52579bfb386281085bedce58 Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
9d71283328fbad680cc74d9b287580e373eb4d6c	05-Oct-2012	Jouni Malinen <j@w1.fi>	P2P: Fix network removal to select correct block If wpa_s->current_ssid is not set (e.g., after disconnection that did not result in immediate group removal), an incorrect group could have been removed since the network block iteration here could select the network block that is used to store persistent group credentials. Fix this by verifying that disabled != 2 to avoid picking the network block that could not have been the temporary P2P group. Bug: 7290511 Change-Id: Ia61bab3e11137ab2c0c34014e4d8d8bdee2a0469 /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
adddfc48d2d7bfa2b1a2405ab8f404b6383ec236	03-Oct-2012	Jouni Malinen <j@w1.fi>	P2P: Fix p2p_cancel processing during group formation The wpa_s->p2p_in_provisioning flag did not get cleared in some cases where p2p_cancel command is used to stop group formation. This can result in some operations (like p2p_find) failing afterwards. Fix this by using wpas_group_formation_completed() when processing p2p_cancel for a group that has not yet completed group formation. Bug: 7280743 Change-Id: I2dea935bd7c0509237de54bd048954f75ce80bfc Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
91c40cdce17424d9a4718876becf0b7811cf68f2	25-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: P2P-related fixes - P2P: Show own channel list in debug log - P2P: Allow peer to propose channel in invitation process - P2P: Clear sta_scan_pending on group removal - P2P: Fix ignoring of PD Response due to dialog token mismatch BUG: 7226065, 7231289 Change-Id: Iacb0f85d80f63bcdf311ccc0d29d0c282a0c0576 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
aa532510a7b8c4da2d7d6e2c11dda5db840894e4	24-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: P2P-related fixes - Remove unused function warning in WPS-NFC case - P2P: Fix p2p_ctrl_invite_persistent to parse peer parameter - hostapd: Fix CONFIG_INTERWORKING=y build without CONFIG_HS20=y - hostapd: Fix WDS VLAN bridge handling - hostapd: Send EAPOL frames from the VO queue if WMM is active - P2P: Remove channel 14 from supported P2P channels - hostapd: Clear WLAN_STA_ASSOC_REQ_OK if sending the assoc response failed - hostapd: Add check for the wds sta flag before creating 4addr VLANs - nl80211: Use the monitor interface if socket tx status is not supported - wpa_supplicant: Set state to DISCONNECTED on AP creation errors - P2P: Fix p2p_group_idle in no-group-interface P2P client case - P2P: Fix PSK configuration for GO network - Print control interface commands in easier format - Add debug print for no enabled networks case - P2P: Add more debug prints for GO start routines - P2P: Fix pending sta scan processing for concurrent operation cases BUG: 6940646 Change-Id: I1b1c54a08c61ec4af2bfd2274afc93501004eea2 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
f06196652a3e12af00503f4a548c56d4e60f7246	24-Sep-2012	Irfan Sheriff <isheriff@google.com>	Fix build: Add ANDROID_P2P for SCC interop fixes Change-Id: I847b63428b47016cf9a9a0b090636e1d5b9d28b8 /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
af84a575044f6556994fcc124a955fc0ac0a6736	23-Sep-2012	Irfan Sheriff <isheriff@google.com>	GC channel fixes for better interop with SCC - Force operating channel as the only channel in channel list attribute for go negotiation and persistence - Force an operating channel in go negotiation response even if the GO indicates a different in negotiation request - Fix a bug with updating peer operating channel based on GO negotiation confirm Bug: 7217600 Change-Id: I6da0dc1a49c1d99ae97dcab8ee9899e07a80a6cb /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
043a5a9d2586bf379a3f3e811c8c64d92050e131	14-Sep-2012	Jouni Malinen <j@w1.fi>	P2P: Check all interfaces for pending scan for p2p_scan failures Driver could reject the new scan based on any virtual interface running a concurrent scan. As such, mark the pending scan callback for P2P based on any interfaces instead of just the one used for the p2p_scan operation. Signed-hostap: Jouni Malinen <j@w1.fi> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
dc7b71324df9788e194745e8ab9386a4619a623a	14-Sep-2012	Jouni Malinen <j@w1.fi>	P2P: Move p2p_cb_on_scan_complete to global context Since we have a global P2P module, the flag to trigger scan completion events to it needs to be in similar context. The previous design maintained this separately for each virtual interface and if P2P module did not run its scan operation on the virtual interface that completed the scan, P2P module would not be allowed to restart operations properly. Change-Id: I1b5a55c03aede15bbe0ac70dcbe0011a90f69b20 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
5887a9d552f3d9d612011daba073e076daab5b2a	14-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Skip unnecessary scan attempts Change-Id: Ieea8843c0fcb063dbb1df56e5cdf3fbdd0590cd4 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
2b380488c6b5d21e54e98397c7a8d6a9f16dd8b5	13-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	P2P: Skip join in case of provision discovery failure Change-Id: I46cb3d2f17a45bf0ff62697040602334b818d805 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
f4f5db315918f3f048324ea43dc37a3b0fb31ecc	11-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Improve scan during p2p_find Change-Id: I733b23c2b7a24cfa96fe6593adbcbeb7d0798002 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
5a85f720c8e43866880fdf9446dc5ad9f45e9091	11-Sep-2012	Irfan Sheriff <isheriff@google.com>	Merge "clear wfd_dev_info_hex before use" into jb-mr1-dev
8d96518810ad721dc2f07d3b08a186ce23db06ff	11-Sep-2012	Irfan Sheriff <isheriff@google.com>	clear wfd_dev_info_hex before use Change-Id: Ic5cdb4df220834faf9e7da5cc1cc0a4191e6abd1 /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
a2854abb63b41c123e4c78e5653a55d902f00be6	11-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Postpone P2P scan if usual scan is in progress BUG: b/7137954 Change-Id: I64ef8dbb51c354b4cdebe490ffcd2cec07995939 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
8367dc909f536f600c7474582fe0a96bef7c78fc	10-Sep-2012	Irfan Sheriff <isheriff@google.com>	Add WFD dev info in device found event Change-Id: If25804d41e7ea1d028a30c180290d8de547f43e8 /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
5c44edb00c9384534a1b50981071874436aaecd5	31-Aug-2012	Jouni Malinen <jouni@qca.qualcomm.com>	P2P: Do not fail p2p_group_remove just based on current_ssid The wpa_s->current_ssid pointer may get cleared, e.g., when disconnected. Commit 30ee769235f3170d9bf6b62c11c6e018e97deb84 made wpas_p2p_group_delete() exit early before removing a P2P interface in this type of case. That can cause number of issues from p2p_group_remove command failing to busy loop when terminating wpa_supplicant if there is a P2P group interface in client mode and that interface happens to be in disconnected state. Fix these issues by allowing wpas_p2p_group_delete() remove the P2P group interface regardless of whether wpa_s->currnt_ssid is set. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
31be0a4b946ecab910c0a9af3837dbccea5d204b	31-Aug-2012	Jouni Malinen <jouni@qca.qualcomm.com>	P2P: Allow p2p_invite-persistent to specify channel for GO The freq and ht40 parameters can now be used with the p2p_invite command when reinvoking a persistent group as the GO. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
2b89da85b8cfe9bb862e8dd334855263c3522c00	31-Aug-2012	Jouni Malinen <jouni@qca.qualcomm.com>	Fix disconnection event processing Commit 0d30cc240fa36905b034dc9676f9d8da0ac18e56 forced wpa_s->current_ssid and wpa_s->key_mgmt to be cleared in wpa_supplicant_mark_disassoc() which gets called from wpa_supplicant_event_disassoc(). This broke IEEE 802.1X authentication failure processing and P2P deauthentication notification (group termination). Fix this by splitting wpa_supplicant_event_disassoc() into two parts and make wpas_p2p_deauth_notif() indicate whether the interface was removed. If so, the last part of disassocition event processing is skipped. Since the wpa_supplicant_mark_disassoc() call is in the second part, the above mentioned issues are resolved. In addition, this cleans up the P2P group interface removal case by not trying to use fast reconnection mechanism just before the interface gets removed. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
61d9df3e62aaa0e87ad05452fcb95142159a17b6	30-Aug-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to 29-Aug-2012 TOT commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722 Author: Jouni Malinen <jouni@qca.qualcomm.com> Date: Fri Mar 2 22:31:04 2012 +0200 WFD: Add preliminary WSD request processing and response This commit does not yet address support for different device roles, i.e., the same set of subelements are returned regardless of which role was indicated in the request. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> Change-Id: I9d63acce719b982c02e589bb59602382e82988c8 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
4b86ea55603eded752b5773179884a35e74e1a89	04-Sep-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to BRCM version 0.8.0-38 - Restore p2p_group_formation pointer till the 4-way handshake completes for the p2p client Change-Id: I976659ae5dac4cf01ecdd7995ff9abb6bf914bc1 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
ad266fb3da6083126e7619e525153839b918aa44	25-Aug-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to BRCM version 0.8.0-37 - Allow AP_SME support - Do not send disassoc after EAP failure since AP_SME is enabled and del_station will be called - Allow group idle timeout to run during WPS disconnect Change-Id: I7e9e15b9c44804196bc98c01d51a71e24412b91d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
04abaa93653bcee36d59576c90f283d4efdb0a64	18-Aug-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to BRCM version 0.8.0-36 Change-Id: Ic3f1375953f4a7c77d2208f8436d951889093397 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
b5e8f06e18446918f6d801566e5709a8c87f1780	08-Aug-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to BRCM version 0.8.0-34 - Remove interface priority - Add action parameter to service discovery functionality Change-Id: Ibc74c4053996e91f2f577b57695c68c86b5603c2 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
04949598a23f501be6eec21697465fd46a28840a	19-Jul-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to 07-Jul-2012 TOT commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4 Author: Jouni Malinen <j@w1.fi> Date: Sat Jul 7 13:01:45 2012 +0300 WPS SSDP: Fix socket leaks on error paths Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
61dc7fcf73a67f1611a17db5b8170fb468e5137b	06-Jun-2012	Irfan Sheriff <isheriff@google.com>	Fix supplicant crash at group removal Bug: 6613470 Change-Id: Ia96694ce906414b3f56cd57416d7c4c6f2030a6e /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
98f9e76624da6bb96edc1982c423e4a119c5170a	30-May-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to Version 0.8.27 from BRCM - Fix crash during TRUE pbc overlap - Fix p2p_stop_find event - Avoid race condition in GO-NEG process if both peers enter p2p_connect at the same time - Retry assoc immediately on ASSOC-REJECT. Previously assoc was retried on authentication timeout (which occurs after 10secs). Now on assoc reject, we cancel the auth timer and then initiate a assoc scan. BUG: 6543705, 6427094 Change-Id: I4489fb14b6cead069f0d14fcbb9e2224f790d77b Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
2fb777c379ad560c309c54b96c2c13291da23f54	02-May-2012	Dmitry Shmidt <dimitrysh@google.com>	wpa_supplicant: Update to Version 0.8.26 from BRCM - Add interface command - Improve scan handling during P2P BUG: b/6324527, b/6427094 Change-Id: I4425f44d2a15de0725ba4a1b42cc56e10954b314 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c
687922c7347bdc3b4f8c921efe1d1388cb3baac0	26-Mar-2012	Dmitry Shmidt <dimitrysh@google.com>	Update to Version 0.8.24 from BRCM - Add 'conc_priority' command - Fix handling a single channel concurrency case: If conc_priority is not set, advertise the frequency conflict to the framework and disable the new connection attempted - When P2P Interface gets removed due to single channel frequency conflict, show GROUP_REMOVE reason=FREQ_CONFLICT - Fix sched scan processing Change-Id: Ie6fe105cebd379a0a9c49ace62d2e48e71571107 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> /external/wpa_supplicant_8/wpa_supplicant/p2p_supplicant.c