1/* 2 * QEMU USB API 3 * 4 * Copyright (c) 2005 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25#ifndef _HW_USB_H 26#define _HW_USB_H 27 28#include "block.h" 29 30#define USB_TOKEN_SETUP 0x2d 31#define USB_TOKEN_IN 0x69 /* device -> host */ 32#define USB_TOKEN_OUT 0xe1 /* host -> device */ 33 34/* specific usb messages, also sent in the 'pid' parameter */ 35#define USB_MSG_ATTACH 0x100 36#define USB_MSG_DETACH 0x101 37#define USB_MSG_RESET 0x102 38 39#define USB_RET_NODEV (-1) 40#define USB_RET_NAK (-2) 41#define USB_RET_STALL (-3) 42#define USB_RET_BABBLE (-4) 43#define USB_RET_ASYNC (-5) 44 45#define USB_SPEED_LOW 0 46#define USB_SPEED_FULL 1 47#define USB_SPEED_HIGH 2 48 49#define USB_STATE_NOTATTACHED 0 50#define USB_STATE_ATTACHED 1 51//#define USB_STATE_POWERED 2 52#define USB_STATE_DEFAULT 3 53//#define USB_STATE_ADDRESS 4 54//#define USB_STATE_CONFIGURED 5 55#define USB_STATE_SUSPENDED 6 56 57#define USB_CLASS_AUDIO 1 58#define USB_CLASS_COMM 2 59#define USB_CLASS_HID 3 60#define USB_CLASS_PHYSICAL 5 61#define USB_CLASS_STILL_IMAGE 6 62#define USB_CLASS_PRINTER 7 63#define USB_CLASS_MASS_STORAGE 8 64#define USB_CLASS_HUB 9 65#define USB_CLASS_CDC_DATA 0x0a 66#define USB_CLASS_CSCID 0x0b 67#define USB_CLASS_CONTENT_SEC 0x0d 68#define USB_CLASS_APP_SPEC 0xfe 69#define USB_CLASS_VENDOR_SPEC 0xff 70 71#define USB_DIR_OUT 0 72#define USB_DIR_IN 0x80 73 74#define USB_TYPE_MASK (0x03 << 5) 75#define USB_TYPE_STANDARD (0x00 << 5) 76#define USB_TYPE_CLASS (0x01 << 5) 77#define USB_TYPE_VENDOR (0x02 << 5) 78#define USB_TYPE_RESERVED (0x03 << 5) 79 80#define USB_RECIP_MASK 0x1f 81#define USB_RECIP_DEVICE 0x00 82#define USB_RECIP_INTERFACE 0x01 83#define USB_RECIP_ENDPOINT 0x02 84#define USB_RECIP_OTHER 0x03 85 86#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 87#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 88#define InterfaceRequest \ 89 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) 90#define InterfaceOutRequest \ 91 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) 92#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 93#define EndpointOutRequest \ 94 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 95 96#define USB_REQ_GET_STATUS 0x00 97#define USB_REQ_CLEAR_FEATURE 0x01 98#define USB_REQ_SET_FEATURE 0x03 99#define USB_REQ_SET_ADDRESS 0x05 100#define USB_REQ_GET_DESCRIPTOR 0x06 101#define USB_REQ_SET_DESCRIPTOR 0x07 102#define USB_REQ_GET_CONFIGURATION 0x08 103#define USB_REQ_SET_CONFIGURATION 0x09 104#define USB_REQ_GET_INTERFACE 0x0A 105#define USB_REQ_SET_INTERFACE 0x0B 106#define USB_REQ_SYNCH_FRAME 0x0C 107 108#define USB_DEVICE_SELF_POWERED 0 109#define USB_DEVICE_REMOTE_WAKEUP 1 110 111#define USB_DT_DEVICE 0x01 112#define USB_DT_CONFIG 0x02 113#define USB_DT_STRING 0x03 114#define USB_DT_INTERFACE 0x04 115#define USB_DT_ENDPOINT 0x05 116 117#define USB_ENDPOINT_XFER_CONTROL 0 118#define USB_ENDPOINT_XFER_ISOC 1 119#define USB_ENDPOINT_XFER_BULK 2 120#define USB_ENDPOINT_XFER_INT 3 121 122typedef struct USBPort USBPort; 123typedef struct USBDevice USBDevice; 124typedef struct USBPacket USBPacket; 125 126/* definition of a USB device */ 127struct USBDevice { 128 void *opaque; 129 130 /* 131 * Process USB packet. 132 * Called by the HC (Host Controller). 133 * 134 * Returns length of the transaction 135 * or one of the USB_RET_XXX codes. 136 */ 137 int (*handle_packet)(USBDevice *dev, USBPacket *p); 138 139 /* 140 * Called when device is destroyed. 141 */ 142 void (*handle_destroy)(USBDevice *dev); 143 144 int speed; 145 146 /* The following fields are used by the generic USB device 147 layer. They are here just to avoid creating a new structure 148 for them. */ 149 150 /* 151 * Reset the device 152 */ 153 void (*handle_reset)(USBDevice *dev); 154 155 /* 156 * Process control request. 157 * Called from handle_packet(). 158 * 159 * Returns length or one of the USB_RET_ codes. 160 */ 161 int (*handle_control)(USBDevice *dev, int request, int value, 162 int index, int length, uint8_t *data); 163 164 /* 165 * Process data transfers (both BULK and ISOC). 166 * Called from handle_packet(). 167 * 168 * Returns length or one of the USB_RET_ codes. 169 */ 170 int (*handle_data)(USBDevice *dev, USBPacket *p); 171 172 uint8_t addr; 173 char devname[32]; 174 175 int state; 176 uint8_t setup_buf[8]; 177 uint8_t data_buf[1024]; 178 int remote_wakeup; 179 int setup_state; 180 int setup_len; 181 int setup_index; 182}; 183 184typedef void (*usb_attachfn)(USBPort *port, USBDevice *dev); 185 186/* USB port on which a device can be connected */ 187struct USBPort { 188 USBDevice *dev; 189 usb_attachfn attach; 190 void *opaque; 191 int index; /* internal port index, may be used with the opaque */ 192 struct USBPort *next; /* Used internally by qemu. */ 193}; 194 195typedef void USBCallback(USBPacket * packet, void *opaque); 196 197/* Structure used to hold information about an active USB packet. */ 198struct USBPacket { 199 /* Data fields for use by the driver. */ 200 int pid; 201 uint8_t devaddr; 202 uint8_t devep; 203 uint8_t *data; 204 int len; 205 /* Internal use by the USB layer. */ 206 USBCallback *complete_cb; 207 void *complete_opaque; 208 USBCallback *cancel_cb; 209 void *cancel_opaque; 210}; 211 212/* Defer completion of a USB packet. The hadle_packet routine should then 213 return USB_RET_ASYNC. Packets that complete immediately (before 214 handle_packet returns) should not call this method. */ 215static inline void usb_defer_packet(USBPacket *p, USBCallback *cancel, 216 void * opaque) 217{ 218 p->cancel_cb = cancel; 219 p->cancel_opaque = opaque; 220} 221 222/* Notify the controller that an async packet is complete. This should only 223 be called for packets previously deferred with usb_defer_packet, and 224 should never be called from within handle_packet. */ 225static inline void usb_packet_complete(USBPacket *p) 226{ 227 p->complete_cb(p, p->complete_opaque); 228} 229 230/* Cancel an active packet. The packed must have been deferred with 231 usb_defer_packet, and not yet completed. */ 232static inline void usb_cancel_packet(USBPacket * p) 233{ 234 p->cancel_cb(p, p->cancel_opaque); 235} 236 237int usb_device_add_dev(USBDevice *dev); 238int usb_device_del_addr(int bus_num, int addr); 239void usb_attach(USBPort *port, USBDevice *dev); 240int usb_generic_handle_packet(USBDevice *s, USBPacket *p); 241int set_usb_string(uint8_t *buf, const char *str); 242void usb_send_msg(USBDevice *dev, int msg); 243 244/* usb hub */ 245USBDevice *usb_hub_init(int nb_ports); 246 247/* usb-linux.c */ 248USBDevice *usb_host_device_open(const char *devname); 249int usb_host_device_close(const char *devname); 250void usb_host_info(Monitor *mon); 251 252/* usb-hid.c */ 253USBDevice *usb_mouse_init(void); 254USBDevice *usb_tablet_init(void); 255USBDevice *usb_keyboard_init(void); 256void usb_hid_datain_cb(USBDevice *dev, void *opaque, void (*datain)(void *)); 257 258/* usb-msd.c */ 259USBDevice *usb_msd_init(const char *filename); 260BlockDriverState *usb_msd_get_bdrv(USBDevice *dev); 261 262/* usb-net.c */ 263USBDevice *usb_net_init(NICInfo *nd); 264 265/* usb-bt.c */ 266USBDevice *usb_bt_init(HCIInfo *hci); 267 268/* usb-wacom.c */ 269USBDevice *usb_wacom_init(void); 270 271/* usb-serial.c */ 272USBDevice *usb_serial_init(const char *filename); 273 274/* usb ports of the VM */ 275 276void qemu_register_usb_port(USBPort *port, void *opaque, int index, 277 usb_attachfn attach); 278 279#define VM_USB_HUB_SIZE 8 280 281/* usb-musb.c */ 282enum musb_irq_source_e { 283 musb_irq_suspend = 0, 284 musb_irq_resume, 285 musb_irq_rst_babble, 286 musb_irq_sof, 287 musb_irq_connect, 288 musb_irq_disconnect, 289 musb_irq_vbus_request, 290 musb_irq_vbus_error, 291 musb_irq_rx, 292 musb_irq_tx, 293 musb_set_vbus, 294 musb_set_session, 295 __musb_irq_max, 296}; 297 298typedef struct MUSBState MUSBState; 299MUSBState *musb_init(qemu_irq *irqs); 300uint32_t musb_core_intr_get(MUSBState *s); 301void musb_core_intr_clear(MUSBState *s, uint32_t mask); 302void musb_set_size(MUSBState *s, int epnum, int size, int is_tx); 303 304#endif /* _HW_USB_H */ 305