444d567b27731d8572ef37697dd12fd1c37c2f24 |
|
01-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 17b8995cf5813d7c027cd7a6884700e791d72392 17b8995 Interworking: Try to use same BSS entry for storing GAS results 3db5439 Optimize Extended Capabilities element to be of minimal length 8cd6b7b hostapd/wpa_s: Use driver's extended capabilities acb5464 Add ctrl_iface command FLUSH for clearing wpa_supplicant state 97236ce WPS: Skip rescanning after provisioning if AP was configured 4342326 Add ignore_old_scan_res configuration parameter 9599ccc WPS: Clear after_wps on new WPS connection 702621e WPS: Use latest updated BSS entry if multiple BSSID matches found ab547b5 WPS: Add more helpful debug for invalid WPS_REG command parsing a679c0f WPS: Allow hostapd process to control independent WPS interfaces ccdff94 WPS AP: Add support for reconfiguration with in-memory config 8970bae nl80211: Use nla_nest_start/end instead of nla_put_nested 558d69e P2P: Omit P2P Group Info in case of no connected peers 65a32cd AP: Fix infinite loop in WPA state machine when out of random bytes a5f61b2 Fix OLBC non-HT AP detection to check channel 69554d7 ap_list: Remove unused functions 08c99ca ap_list: Remove unused iteration list pointers 6b16917 ap_list: Remove unused fields 66f1f75 P2P: Fix provision discovery response handling in some cases 2f9b66d Extend ROAM command to handle multiple SSIDs per BSS Change-Id: I46002b1d3bbf6e376c2ae09bcb2c824c54805bbd Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
33e38bfa7159cef089d6ee0d904778e184c72c47 |
|
27-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f8361e3d681e55efead2aac79fedf4b232d533fb TDLS: Pass peer's VHT Capability information during sta_add WPS: Clear sent_carrier to avoid errors in python script WPS: Fix OOB Device Password use in PSK1,PSK1 derivation WPS: Add AP mode NFC connection handover with wpa_supplicant/nfcpy WPS NFC: Add connection handover support for ER WPS: Add wps-er-config command for writing config token from ER Change-Id: I8934dcffb9f66bd3a2f840b78d72c9dd6cecf61d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
f86232838cf712377867cb42417c1613ab5dc425 |
|
20-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b618a469c42120e984ab1c85ed6058504d1fca78 Author: Jouni Malinen <jouni@qca.qualcomm.com> Date: Sat Feb 16 19:54:09 2013 +0200 Interworking: Select highest priority cred if multiple matches Interworking: Select highest priority cred if multiple matches GAS server: Fix a regression in GAS server callback hostapd: Fix Max SP Length derivation from QoS Info nl80211: Configure STA Capabilities and Extended Capabilities Synchronize with wireless-testing.git include/uapi/linux/nl80211.h WPS: Fix build without CONFIG_WPS_NFC WPS: Add support for NFC handover select generation with wpa_supplicant WPS: Update NFC connection handover documentation WPS: Add support for config token generation with wpa_supplicant WPS: Allow password token to be written with nfcpy WPS: Use pre-configured NFC password token instead of overriding it TDLS: Pass peer's Capability and Ext Capability info during sta_add TDLS: Pass peer's HT Capability and QOS information during sta_add nl80211: Add debug prints for STA add/set operations TDLS: Fix add/set STA operation Synchronize with wireless-testing.git include/uapi/linux/nl80211.h WPS: Allow Device Password to be changed from M1 to M2 WPS: Fix wps_reg nfc-pw option TDLS: Tear down peers when disconnecting from the AP P2P: Do not use old scan result data for peer discovery Use more accurate timestamps for scan results P2P: Postpone P2P-DEVICE-FOUND if config_methods not known P2P: Do not allow peer update to clear config_methods WPS: Report NFC connection handover completion differently P2P: Avoid concurrent scans during all steps of group formation P2P: Cancel group formation timeout on group removal (on client) WPS: Change listen time to match nfcpy default (250 ms) WPS: Report only the carrier record from NFC to wpa_supplicant WPS: Fetch only the carrier record from wpa_supplicant for NFC WPS: Update nfcpy script to support AP mode NFC connection handover WPS: Add command for fetching carrier record for NFC handover WPS: Clean up debug prints with nfcpy WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy WPS: Use alternating poll/listen for NFC peer discovery with nfcpy WPS: Configure logging to show nfcpy log message WPS: Add an example python script for NFC operations with hostapd hostapd: Do not change HT40 capability due to OBSS scan dbus: Add missing signal description for WPS (7) EAP peer: Add Session-Id derivation to more EAP methods EAP peer: Add Session-Id derivation EAP-IKEV2 server: Fix invalid memory freeing operation eap_proxy: Add a dummy implementation for compilation testing eap_proxy: Add mechanism for allowing EAP methods to be offloaded Android: Allow setgroups to be overridden from build configuration P2P: Send p2p_stop_find event on failure to start pending p2p_find P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled Capability matching for 60 GHz band nl80211: Add ctrl_iface message for AP mode connection rejection P2P: Allow local configuration to use 5 GHz band 40 MHz channels Fix BSS RANGE command for no exact id match cases Change-Id: Iac9284bba31db40911aecc3adf2843c9b1576db1 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4 Author: Jouni Malinen <j@w1.fi> Date: Sat Jul 7 13:01:45 2012 +0300 WPS SSDP: Fix socket leaks on error paths Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM - Based on 0c01d65 : Ignore TX status for Data frames from not associated STA Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X Based on: commit 0725cc7b7efc434910e89865c42eda7ce61bbf08 Author: Jouni Malinen <j@w1.fi> Date: Thu Apr 21 20:41:01 2011 +0300 Enable CONFIG_DRIVER_NL80211=y in the default configuration nl80211 should be preferred over WEXT with any recent Linux kernel version. Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|