| 444d567b27731d8572ef37697dd12fd1c37c2f24 |
|
01-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 17b8995cf5813d7c027cd7a6884700e791d72392
17b8995 Interworking: Try to use same BSS entry for storing GAS results
3db5439 Optimize Extended Capabilities element to be of minimal length
8cd6b7b hostapd/wpa_s: Use driver's extended capabilities
acb5464 Add ctrl_iface command FLUSH for clearing wpa_supplicant state
97236ce WPS: Skip rescanning after provisioning if AP was configured
4342326 Add ignore_old_scan_res configuration parameter
9599ccc WPS: Clear after_wps on new WPS connection
702621e WPS: Use latest updated BSS entry if multiple BSSID matches found
ab547b5 WPS: Add more helpful debug for invalid WPS_REG command parsing
a679c0f WPS: Allow hostapd process to control independent WPS interfaces
ccdff94 WPS AP: Add support for reconfiguration with in-memory config
8970bae nl80211: Use nla_nest_start/end instead of nla_put_nested
558d69e P2P: Omit P2P Group Info in case of no connected peers
65a32cd AP: Fix infinite loop in WPA state machine when out of random bytes
a5f61b2 Fix OLBC non-HT AP detection to check channel
69554d7 ap_list: Remove unused functions
08c99ca ap_list: Remove unused iteration list pointers
6b16917 ap_list: Remove unused fields
66f1f75 P2P: Fix provision discovery response handling in some cases
2f9b66d Extend ROAM command to handle multiple SSIDs per BSS
Change-Id: I46002b1d3bbf6e376c2ae09bcb2c824c54805bbd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
| 33e38bfa7159cef089d6ee0d904778e184c72c47 |
|
27-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f8361e3d681e55efead2aac79fedf4b232d533fb
TDLS: Pass peer's VHT Capability information during sta_add
WPS: Clear sent_carrier to avoid errors in python script
WPS: Fix OOB Device Password use in PSK1,PSK1 derivation
WPS: Add AP mode NFC connection handover with wpa_supplicant/nfcpy
WPS NFC: Add connection handover support for ER
WPS: Add wps-er-config command for writing config token from ER
Change-Id: I8934dcffb9f66bd3a2f840b78d72c9dd6cecf61d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
| f86232838cf712377867cb42417c1613ab5dc425 |
|
20-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b618a469c42120e984ab1c85ed6058504d1fca78
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Sat Feb 16 19:54:09 2013 +0200
Interworking: Select highest priority cred if multiple matches
Interworking: Select highest priority cred if multiple matches
GAS server: Fix a regression in GAS server callback
hostapd: Fix Max SP Length derivation from QoS Info
nl80211: Configure STA Capabilities and Extended Capabilities
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Fix build without CONFIG_WPS_NFC
WPS: Add support for NFC handover select generation with wpa_supplicant
WPS: Update NFC connection handover documentation
WPS: Add support for config token generation with wpa_supplicant
WPS: Allow password token to be written with nfcpy
WPS: Use pre-configured NFC password token instead of overriding it
TDLS: Pass peer's Capability and Ext Capability info during sta_add
TDLS: Pass peer's HT Capability and QOS information during sta_add
nl80211: Add debug prints for STA add/set operations
TDLS: Fix add/set STA operation
Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
WPS: Allow Device Password to be changed from M1 to M2
WPS: Fix wps_reg nfc-pw option
TDLS: Tear down peers when disconnecting from the AP
P2P: Do not use old scan result data for peer discovery
Use more accurate timestamps for scan results
P2P: Postpone P2P-DEVICE-FOUND if config_methods not known
P2P: Do not allow peer update to clear config_methods
WPS: Report NFC connection handover completion differently
P2P: Avoid concurrent scans during all steps of group formation
P2P: Cancel group formation timeout on group removal (on client)
WPS: Change listen time to match nfcpy default (250 ms)
WPS: Report only the carrier record from NFC to wpa_supplicant
WPS: Fetch only the carrier record from wpa_supplicant for NFC
WPS: Update nfcpy script to support AP mode NFC connection handover
WPS: Add command for fetching carrier record for NFC handover
WPS: Clean up debug prints with nfcpy
WPS: Remove 0.5 sec extra wait from NFC handover with nfcpy
WPS: Use alternating poll/listen for NFC peer discovery with nfcpy
WPS: Configure logging to show nfcpy log message
WPS: Add an example python script for NFC operations with hostapd
hostapd: Do not change HT40 capability due to OBSS scan
dbus: Add missing signal description for WPS (7)
EAP peer: Add Session-Id derivation to more EAP methods
EAP peer: Add Session-Id derivation
EAP-IKEV2 server: Fix invalid memory freeing operation
eap_proxy: Add a dummy implementation for compilation testing
eap_proxy: Add mechanism for allowing EAP methods to be offloaded
Android: Allow setgroups to be overridden from build configuration
P2P: Send p2p_stop_find event on failure to start pending p2p_find
P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled
Capability matching for 60 GHz band
nl80211: Add ctrl_iface message for AP mode connection rejection
P2P: Allow local configuration to use 5 GHz band 40 MHz channels
Fix BSS RANGE command for no exact id match cases
Change-Id: Iac9284bba31db40911aecc3adf2843c9b1576db1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
| 04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT
commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300
WPS SSDP: Fix socket leaks on error paths
Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/eap_peer/eap_wsc.c
|