1/* Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. 2 * 3 * Redistribution and use in source and binary forms, with or without 4 * modification, are permitted provided that the following conditions are 5 * met: 6 * * Redistributions of source code must retain the above copyright 7 * notice, this list of conditions and the following disclaimer. 8 * * Redistributions in binary form must reproduce the above 9 * copyright notice, this list of conditions and the following 10 * disclaimer in the documentation and/or other materials provided 11 * with the distribution. 12 * * Neither the name of The Linux Foundation. nor the names of its 13 * contributors may be used to endorse or promote products derived 14 * from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 23 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 24 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 25 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN 26 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 */ 29#ifndef __c2d2_h_ 30#define __c2d2_h_ 31 32#ifdef __cplusplus 33extern "C" { 34#endif 35 36#ifndef C2D_API 37#define C2D_API /* define API export as needed */ 38#endif 39#if !defined(int32) && !defined(_INT32_DEFINED) 40typedef int int32; 41#define _INT32_DEFINED 42#endif 43#if !defined(uint32) && !defined(_UINT32_DEFINED) 44typedef unsigned int uint32; 45#define _UINT32_DEFINED 46#endif 47 48/*****************************************************************************/ 49/*********************** Blit definitions *****************************/ 50/*****************************************************************************/ 51 52/* Status codes, returned by any blit function */ 53typedef enum { 54 C2D_STATUS_OK = 0, 55 C2D_STATUS_NOT_SUPPORTED = 1, 56 C2D_STATUS_OUT_OF_MEMORY = 2, 57 C2D_STATUS_INVALID_PARAM = 3, 58 C2D_STATUS_SURFACE_IN_USE = 4, 59} C2D_STATUS; 60 61 62/* Definitions of color format modes, used together with color formats */ 63typedef enum { 64 C2D_FORMAT_PACK_INTO_32BIT = (1 << 8), /* pack into dword if set */ 65 C2D_FORMAT_SWAP_ENDIANNESS = (1 << 9), /* swaps the order */ 66 C2D_FORMAT_LINEAR_SPACE = (1 << 10), /* linear color space */ 67 C2D_FORMAT_PREMULTIPLIED = (1 << 11), /* alpha premultiplied */ 68 C2D_FORMAT_INVERT_ALPHA = (1 << 12), /* inverts alpha */ 69 C2D_FORMAT_DISABLE_ALPHA = (1 << 13), /* disables alpha */ 70 C2D_FORMAT_INTERLACED = (1 << 14), /* YUV line-interlaced */ 71 C2D_FORMAT_TRANSPARENT = (1 << 15), /* YUV 1-bit alpha in Y */ 72 C2D_FORMAT_MACROTILED = (1 << 16), /* tiled in macro level */ 73 C2D_FORMAT_TILED_4x4 = (1 << 17), /* 4x4 tiled format */ 74 C2D_FORMAT_SWAP_RB = (1 << 18), /* Swap R & B color components */ 75} C2D_FORMAT_MODE; 76 77/* Definitions of supported RGB formats, used in C2D_RGB_SURFACE_DEF. 78 * The bits of each color channel are packed into a machine word 79 * representing a single pixel from left to right (MSB to LSB) in the 80 * order indicated by format name. For the sub-byte formats the pixels 81 * are packed into bytes from left to right (MSbit to LSBit). 82 * If the C2D_FORMAT_PACK_INTO_32BIT bit is set, the minimal 83 * machine word used for pixel storage is 32-bit and the whole word 84 * is reversed if endianness is swapped. 85 * If the C2D_FORMAT_SWAP_ENDIANNESS bit is set, the order within a 86 * minimal machine word representing a pixel 87 * is reversed for both sub-byte and multi-byte formats. 88 * If the C2D_FORMAT_LINEAR_SPACE bit is set, the color space of 89 * the formats below is considered linear, if applicable. 90 * If the C2D_FORMAT_PREMULTIPLIED bit is set, the color channels 91 * are premultiplied with the alpha, if applicable. 92 * If the C2D_FORMAT_INVERT_ALPHA bit is set, the alpha interpretation 93 * is inverted: 0 - opaque, 1 - transparent, if applicable. 94 * If the C2D_FORMAT_DISABLE_ALPHA bit is set, the alpha channel serves 95 * as a placeholder and is ignored during blit, if applicable. 96 * If the C2D_FORMAT_MACROTILED bit is set, the surface is in the 97 * tiled format : 64x32 for 8bpp, 32x32 for 16bpp formats */ 98typedef enum { 99 C2D_COLOR_FORMAT_1 = 0, /* 1-bit alpha/color expansion */ 100 101 C2D_COLOR_FORMAT_2_PALETTE = 1, /* 2-bit indices for palette */ 102 C2D_COLOR_FORMAT_4_PALETTE = 2, /* 4-bit indices for palette */ 103 C2D_COLOR_FORMAT_8_PALETTE = 3, /* 8-bit indices for palette */ 104 105 C2D_COLOR_FORMAT_2_L = 4, /* 2-bit grayscale */ 106 C2D_COLOR_FORMAT_4_L = 5, /* 4-bit grayscale */ 107 C2D_COLOR_FORMAT_8_L = 6, /* 8-bit grayscale */ 108 109 C2D_COLOR_FORMAT_2_A = 7, /* 2-bit alpha only */ 110 C2D_COLOR_FORMAT_4_A = 8, /* 4-bit alpha only */ 111 C2D_COLOR_FORMAT_8_A = 9, /* 8-bit alpha only */ 112 113 C2D_COLOR_FORMAT_444_RGB = 10, /* 12-bit colors */ 114 C2D_COLOR_FORMAT_565_RGB = 11, /* 16-bit colors */ 115 C2D_COLOR_FORMAT_888_RGB = 12, /* 24-bit colors */ 116 117 C2D_COLOR_FORMAT_1555_ARGB = 13, /* 16-bit colors (1-bit alpha) */ 118 C2D_COLOR_FORMAT_4444_ARGB = 14, /* 16-bit colors (4-bit alpha) */ 119 C2D_COLOR_FORMAT_8565_ARGB = 15, /* 24-bit colors (8-bit alpha) */ 120 C2D_COLOR_FORMAT_8888_ARGB = 16, /* 32-bit colors (8-bit alpha) */ 121 122 C2D_COLOR_FORMAT_5551_RGBA = 17, /* 16-bit colors (1-bit alpha) */ 123 C2D_COLOR_FORMAT_4444_RGBA = 18, /* 16-bit colors (4-bit alpha) */ 124 C2D_COLOR_FORMAT_5658_RGBA = 19, /* 24-bit colors (8-bit alpha) */ 125 C2D_COLOR_FORMAT_8888_RGBA = 20, /* 32-bit colors (8-bit alpha) */ 126 127 /* derived RGB color formats (base format + mode bits) */ 128 129} C2D_RGB_FORMAT; 130 131/* Definitions of supported YUV formats, used in C2D_YUV_SURFACE_DEF. 132 * Each of Y,U,V channels usually takes 1 byte and therefore is 133 * individually addressable. The definitions below show how Y,U,V 134 * channels are packed into macropixels for each particular format. 135 * The order is from left (smaller byte addresses) to right (larger 136 * byte addresses). The first three digits (4xx) denote the chroma 137 * subsampling in standard YUV notation. The digits in the macropixel 138 * denote that the whole block (from the previous digit or from the 139 * beginning) has to be repeated the number of times. Underscores 140 * between Y,U,V channels are used to describe separate planes for 141 * planar YUV formats. Formats are mapped to numbers so that future 142 * versions with various YUV permutations are easy to add. 143 * If the C2D_FORMAT_INTERLACED bit is set, the line order is 144 * interlaced: 0,2,4,...1,3,5... if applicable. 145 * If the C2D_FORMAT_TRANSPARENT bit is set, the least significant 146 * bit of Y channel serves as alpha: 0 - transparent, 1 - opaque. */ 147typedef enum { 148 C2D_COLOR_FORMAT_411_YYUYYV = 110, /* packed, 12-bit */ 149 C2D_COLOR_FORMAT_411_YUYYVY = 111, /* packed, 12-bit */ 150 C2D_COLOR_FORMAT_411_UYYVYY = 112, /* packed, 12-bit, "Y411" */ 151 C2D_COLOR_FORMAT_411_YUYV2Y4 = 116, /* packed, 12-bit */ 152 C2D_COLOR_FORMAT_411_UYVY2Y4 = 117, /* packed, 12-bit, "Y41P" */ 153 154 C2D_COLOR_FORMAT_422_YUYV = 120, /* packed, 16-bit, "YUY2" */ 155 C2D_COLOR_FORMAT_422_UYVY = 121, /* packed, 16-bit, "UYVY" */ 156 C2D_COLOR_FORMAT_422_YVYU = 122, /* packed, 16-bit, "YVYU" */ 157 C2D_COLOR_FORMAT_422_VYUY = 123, /* packed, 16-bit */ 158 159 C2D_COLOR_FORMAT_444_YUV = 130, /* packed, 24-bit */ 160 C2D_COLOR_FORMAT_444_UYV = 131, /* packed, 24-bit, "IYU2" */ 161 C2D_COLOR_FORMAT_444_AYUV = 136, /* packed, 24-bit, "AYUV" */ 162 163 C2D_COLOR_FORMAT_410_Y_UV = 150, /* planar, Y + interleaved UV */ 164 C2D_COLOR_FORMAT_411_Y_UV = 151, /* planar, Y + interleaved UV */ 165 C2D_COLOR_FORMAT_420_Y_UV = 152, /* planar, Y + interleaved UV */ 166 C2D_COLOR_FORMAT_422_Y_UV = 153, /* planar, Y + interleaved UV */ 167 C2D_COLOR_FORMAT_444_Y_UV = 154, /* planar, Y + interleaved UV */ 168 169 C2D_COLOR_FORMAT_410_Y_VU = 160, /* planar, Y + interleaved VU */ 170 C2D_COLOR_FORMAT_411_Y_VU = 161, /* planar, Y + interleaved VU */ 171 C2D_COLOR_FORMAT_420_Y_VU = 162, /* planar, Y + interleaved VU */ 172 C2D_COLOR_FORMAT_422_Y_VU = 163, /* planar, Y + interleaved VU */ 173 C2D_COLOR_FORMAT_444_Y_VU = 164, /* planar, Y + interleaved VU */ 174 175 C2D_COLOR_FORMAT_410_Y_U_V = 170, /* planar, Y + U + V separate */ 176 C2D_COLOR_FORMAT_411_Y_U_V = 171, /* planar, Y + U + V separate */ 177 C2D_COLOR_FORMAT_420_Y_V_U = 172, /* planar, Y + V + U separate */ 178 C2D_COLOR_FORMAT_420_Y_U_V = 173, /* planar, Y + U + V separate */ 179 C2D_COLOR_FORMAT_422_Y_U_V = 174, /* planar, Y + U + V separate */ 180 C2D_COLOR_FORMAT_444_Y_U_V = 175, /* planar, Y + U + V separate */ 181 182 C2D_COLOR_FORMAT_800_Y = 190, /* planar, Y only, grayscale */ 183 184 /* derived YUV color formats (base format + mode bits), FOURCC */ 185 186 C2D_COLOR_FORMAT_411_Y411 = 112, 187 C2D_COLOR_FORMAT_411_Y41P = 117, 188 C2D_COLOR_FORMAT_411_IY41 = 117 | (1 << 14), 189 C2D_COLOR_FORMAT_411_Y41T = 117 | (1 << 15), 190 191 C2D_COLOR_FORMAT_422_YUY2 = 120, 192 C2D_COLOR_FORMAT_422_IUYV = 121 | (1 << 14), 193 C2D_COLOR_FORMAT_422_Y42T = 121 | (1 << 15), 194 C2D_COLOR_FORMAT_444_IYU2 = 131, 195 196 C2D_COLOR_FORMAT_420_NV12 = 152, 197 C2D_COLOR_FORMAT_420_NV21 = 162, 198 199 C2D_COLOR_FORMAT_410_YUV9 = 170, 200 C2D_COLOR_FORMAT_410_YVU9 = 170, 201 C2D_COLOR_FORMAT_411_Y41B = 171, 202 C2D_COLOR_FORMAT_420_YV12 = 172, 203 C2D_COLOR_FORMAT_420_IYUV = 173, 204 C2D_COLOR_FORMAT_420_I420 = 173, 205 C2D_COLOR_FORMAT_422_YV16 = 174, 206 C2D_COLOR_FORMAT_422_Y42B = 174, 207 208 C2D_COLOR_FORMAT_800_Y800 = 190, 209 210} C2D_YUV_FORMAT; 211 212 213/* Configuration bits, used in the config_mask field of C2D_OBJECT struct */ 214typedef enum { 215 C2D_SOURCE_RECT_BIT = (1 << 0), /* enables source_rect field */ 216 C2D_MIRROR_H_BIT = (1 << 1), /* enables horizontal flipping */ 217 C2D_MIRROR_V_BIT = (1 << 2), /* enables vertical flipping */ 218 C2D_SOURCE_TILE_BIT = (1 << 3), /* enables source surface tiling */ 219 C2D_TARGET_RECT_BIT = (1 << 4), /* enables target_rect field */ 220 C2D_ROTATE_BIT = (1 << 5), /* enables all rotation fields */ 221 C2D_SCISSOR_RECT_BIT = (1 << 6), /* enables scissor_rect field */ 222 C2D_MASK_SURFACE_BIT = (1 << 7), /* enables mask_surface_id field */ 223 C2D_MASK_ALIGN_BIT = (1 << 8), /* aligns mask to source_rect */ 224 C2D_MASK_SCALE_BIT = (1 << 9), /* enables mask surface scaling */ 225 C2D_MASK_TILE_BIT = (1 << 10), /* enables mask surface tiling */ 226 C2D_GLOBAL_ALPHA_BIT = (1 << 11), /* enables global_alpha field */ 227 C2D_COLOR_KEY_BIT = (1 << 12), /* enables color_key field */ 228 C2D_NO_PIXEL_ALPHA_BIT = (1 << 13), /* disables source alpha channel */ 229 C2D_NO_BILINEAR_BIT = (1 << 14), /* disables bilinear on scaling */ 230 C2D_NO_ANTIALIASING_BIT = (1 << 15), /* disables antialiasing on edges */ 231 C2D_DRAW_LINE_BIT = (1 << 16), /* enables line drawing with source rectangle */ 232 C2D_DRAW_LINE_NOLAST = (1 << 17), /* disable last pixel draw for line */ 233} C2D_SOURCE_CONFIG; 234 235 236/* Target configuration bits, defines rotation + mirroring. 237 * Mirror is applied prior to rotation if enabled. */ 238typedef enum { 239 C2D_TARGET_MIRROR_H = (1 << 0), /* horizontal flip */ 240 C2D_TARGET_MIRROR_V = (1 << 1), /* vertical flip */ 241 C2D_TARGET_ROTATE_0 = (0 << 2), /* no rotation */ 242 C2D_TARGET_ROTATE_90 = (1 << 2), /* 90 degree rotation */ 243 C2D_TARGET_ROTATE_180 = (2 << 2), /* 180 degree rotation */ 244 C2D_TARGET_ROTATE_270 = (3 << 2), /* 270 degree rotation, 90 + 180 */ 245 C2D_TARGET_MASK_ALIGN = (1 << 4), /* aligns mask to target scissor */ 246 C2D_TARGET_MASK_SCALE = (1 << 5), /* enables mask scaling */ 247 C2D_TARGET_MASK_TILE = (1 << 6), /* enables mask tiling */ 248 C2D_TARGET_COLOR_KEY = (1 << 7), /* enables target_color_key */ 249 C2D_TARGET_NO_PIXEL_ALPHA = (1 << 8), /* disables target alpha channel */ 250} C2D_TARGET_CONFIG; 251 252#define C2D_TARGET_ROTATION_MASK (C2D_TARGET_ROTATE_90*3) 253 254/* Additional blend modes, can be used with both source and target configs. 255 If none of the below is set, the default "SRC over DST" is applied. */ 256typedef enum { 257 C2D_ALPHA_BLEND_SRC_OVER = (0 << 20), /* Default, Porter-Duff "SRC over DST" */ 258 C2D_ALPHA_BLEND_SRC = (1 << 20), /* Porter-Duff "SRC" */ 259 C2D_ALPHA_BLEND_SRC_IN = (2 << 20), /* Porter-Duff "SRC in DST" */ 260 C2D_ALPHA_BLEND_DST_IN = (3 << 20), /* Porter-Duff "DST in SRC" */ 261 C2D_ALPHA_BLEND_SRC_OUT = (4 << 20), /* Porter-Duff "SRC out DST" */ 262 C2D_ALPHA_BLEND_DST_OUT = (5 << 20), /* Porter-Duff "DST out SRC" */ 263 C2D_ALPHA_BLEND_DST_OVER = (6 << 20), /* Porter-Duff "DST over SRC" */ 264 C2D_ALPHA_BLEND_SRC_ATOP = (7 << 20), /* Porter-Duff "SRC ATOP" */ 265 C2D_ALPHA_BLEND_DST_ATOP = (8 << 20), /* Porter-Duff "DST ATOP" */ 266 C2D_ALPHA_BLEND_XOR = (9 << 20), /* Xor */ 267 C2D_ALPHA_BLEND_MULTIPLY = (10 << 20), /* OpenVG "MULTIPLY" */ 268 C2D_ALPHA_BLEND_SCREEN = (11 << 20), /* OpenVG "SCREEN" */ 269 C2D_ALPHA_BLEND_DARKEN = (12 << 20), /* OpenVG "DARKEN" */ 270 C2D_ALPHA_BLEND_LIGHTEN = (13 << 20), /* OpenVG "LIGHTEN" */ 271 C2D_ALPHA_BLEND_ADDITIVE = (14 << 20), /* OpenVG "ADDITIVE" */ 272 C2D_ALPHA_BLEND_DIRECT = (15 << 20), /* Direct alpha blitting */ 273 C2D_ALPHA_BLEND_INVERTC = (16 << 20), /* Invert color */ 274 C2D_ALPHA_BLEND_NONE = (1 << 25), /* disables alpha blending */ 275} C2D_ALPHA_BLEND_MODE; 276 277/* Configuration bits, used in the config_mask field of C2D_OBJECT struct */ 278typedef enum { 279 C2D_OVERRIDE_GLOBAL_TARGET_ROTATE_CONFIG = (1 << 27), /* Overrides TARGET Config */ 280 C2D_OVERRIDE_TARGET_ROTATE_0 = (0 << 28), /* no rotation */ 281 C2D_OVERRIDE_TARGET_ROTATE_90 = (1 << 28), /* 90 degree rotation */ 282 C2D_OVERRIDE_TARGET_ROTATE_180 = (2 << 28), /* 180 degree rotation */ 283 C2D_OVERRIDE_TARGET_ROTATE_270 = (3 << 28), /* 270 degree rotation */ 284} C2D_SOURCE_TARGET_CONFIG; 285 286#define C2D_OVERRIDE_SOURCE_CONFIG_TARGET_ROTATION_SHIFT_MASK 28 287#define C2D_OVERRIDE_TARGET_CONFIG_TARGET_ROTATION_SHIFT_MASK 2 288 289 290/* Surface caps enumeration */ 291typedef enum { 292 C2D_SOURCE = (1 << 0), /* allows to use as a source */ 293 C2D_TARGET = (1 << 1), /* allows to use as a target */ 294 C2D_MASK = (1 << 2), /* allows to use as a mask */ 295 C2D_PALETTE = (1 << 3), /* allows to use as a palette */ 296} C2D_SURFACE_BITS; 297 298/* Surface type enumeration */ 299typedef enum { 300 C2D_SURFACE_RGB_HOST = 1, /* Host memory RGB surface */ 301 C2D_SURFACE_RGB_EXT = 2, /* External memory RGB surface */ 302 C2D_SURFACE_YUV_HOST = 3, /* Host memory YUV surface */ 303 C2D_SURFACE_YUV_EXT = 4, /* External memory YUV surface */ 304 C2D_SURFACE_WITH_PHYS = (1<<3), /* physical address already mapped */ 305 /* this bit is valid with HOST types */ 306 C2D_SURFACE_WITH_PHYS_DUMMY = (1<<4), /* physical address already mapped */ 307 /* this bit is valid with HOST types */ 308} C2D_SURFACE_TYPE; 309 310/* Structure for registering a RGB buffer as a blit surface */ 311typedef struct { 312 uint32 format; /* RGB color format plus additional mode bits */ 313 uint32 width; /* defines width in pixels */ 314 uint32 height; /* defines height in pixels */ 315 void *buffer; /* pointer to the RGB buffer */ 316 void *phys; /* physical address */ 317 int32 stride; /* defines stride in bytes, negative stride is allowed */ 318} C2D_RGB_SURFACE_DEF; 319 320/* Structure for registering a YUV plane(s) as a blit surface */ 321typedef struct { 322 uint32 format; /* YUV color format plus additional mode bits */ 323 uint32 width; /* defines width in pixels */ 324 uint32 height; /* defines height in pixels */ 325 void *plane0; /* holds the whole buffer if YUV format is not planar */ 326 void *phys0; /* physical address */ 327 int32 stride0; /* stride in bytes if YUV format is not planar */ 328 void *plane1; /* holds UV or VU plane for planar interleaved */ 329 void *phys1; /* physical address */ 330 int32 stride1; /* stride for UV or VU plane for planar interleaved */ 331 void *plane2; /* holds the 3. plane, ignored if YUV format is not planar */ 332 void *phys2; /* physical address */ 333 int32 stride2; /* stride for the 3. plane, ignored if YUV format is not planar */ 334} C2D_YUV_SURFACE_DEF; 335 336 337/* Rectangle definition */ 338typedef struct { 339 int32 x; /* upper-left x */ 340 int32 y; /* upper-left y */ 341 int32 width; /* width */ 342 int32 height; /* height */ 343} C2D_RECT; 344 345/* C2D_OBJECT encapsulates the blit parameters for a source surface. 346 * The fg_color defines color in target format for bits equal to 1 347 * in the source C2D_COLOR_FORMAT_1 format. It also defines rendering 348 * color for all alpha-only source formats. If the surface_id is 0 349 * the fg_color defines a constant fill color used instead of the surface. 350 * The bg_color defines color in target format for bits equal to 0 351 * in the source C2D_COLOR_FORMAT_1 format, otherwise both are ignored. 352 * The palette_id is used for all palette source formats, otherwise ignored. 353 354 * The source_rect first defines the content of the source surface, 355 * it is then horizontally/vertically flipped if C2D_MIRROR_*_BIT is set, 356 * then scaled with bilinear interpolation to exactly fit target_rect 357 * or repeated across target_rect if C2D_SOURCE_TILE_BIT is set, 358 * target_rect is then rotated clockwise by an arbitrary angle in degrees 359 * around the rot_orig_x/y, defined relative to target_rect's top left point, 360 * and then clipped to scissor_rect defined in target coordinate system. 361 362 * Finally alpha blending is applied before pixels get written into the target. 363 * Surface's pixel alpha is combined with mask alpha and with global alpha. 364 * Mask surface follows all transformations applied to the source surface. 365 * Source color key defines transparent color, applied together with alpha. */ 366typedef struct C2D_OBJECT_STR { 367 uint32 surface_id; /* source surface */ 368 369 uint32 fg_color; /* foreground color */ 370 uint32 bg_color; /* background color */ 371 uint32 palette_id; /* one-dimensional horizontal palette surface */ 372 373 uint32 config_mask; /* defines which fields below are enabled */ 374 375 C2D_RECT source_rect; /* region of the source surface, 16.16 fp */ 376 C2D_RECT target_rect; /* position and scaling in target, 16.16 fp */ 377 378 int32 rot_orig_x; /* rotation origin relative to target_rect's... */ 379 int32 rot_orig_y; /* ...top left point, both are 16.16 fp */ 380 int32 rotation; /* clock-wise rotation in degrees, 16.16 fp */ 381 382 C2D_RECT scissor_rect; /* defines the clip rectangle in target surface */ 383 384 uint32 mask_surface_id; /* source alpha-mask surface */ 385 uint32 global_alpha; /* 0 = fully transparent, 255 = fully opaque */ 386 uint32 color_key; /* transparent color for the source surface */ 387 388 struct C2D_OBJECT_STR *next; /* pointer to the next object or NULL */ 389} C2D_OBJECT; 390 391/* Configuration bits, driver capabilities used by 2Dapplications */ 392typedef enum { 393 C2D_DRIVER_SUPPORTS_GLOBAL_ALPHA_OP = (1 << 0), 394 C2D_DRIVER_SUPPORTS_TILE_OP = (1 << 1), 395 C2D_DRIVER_SUPPORTS_COLOR_KEY_OP = (1 << 2), 396 C2D_DRIVER_SUPPORTS_NO_PIXEL_ALPHA_OP = (1 << 3), 397 C2D_DRIVER_SUPPORTS_TARGET_ROTATE_OP = (1 << 4), 398 C2D_DRIVER_SUPPORTS_ANTI_ALIASING_OP = (1 << 5), /* antialiasing */ 399 C2D_DRIVER_SUPPORTS_BILINEAR_FILTER_OP = (1 << 6), 400 C2D_DRIVER_SUPPORTS_LENS_CORRECTION_OP = (1 << 7), 401 C2D_DRIVER_SUPPORTS_OVERRIDE_TARGET_ROTATE_OP = (1 << 8), 402 C2D_DRIVER_SUPPORTS_SHADER_BLOB_OP = (1 << 9), 403 C2D_DRIVER_SUPPORTS_MASK_SURFACE_OP = (1 << 10), /* mask surface */ 404 C2D_DRIVER_SUPPORTS_MIRROR_H_OP = (1 << 11), /* horizontal flip */ 405 C2D_DRIVER_SUPPORTS_MIRROR_V_OP = (1 << 12), /* vertical flip */ 406 C2D_DRIVER_SUPPORTS_SCISSOR_RECT_OP = (1 << 13), 407 C2D_DRIVER_SUPPORTS_SOURCE_RECT_OP = (1 << 14), 408 C2D_DRIVER_SUPPORTS_TARGET_RECT_OP = (1 << 15), 409 C2D_DRIVER_SUPPORTS_ROTATE_OP = (1 << 16), /* all rotations */ 410 C2D_DRIVER_SUPPORTS_FLUSH_WITH_FENCE_FD_OP = (1 << 17), /* all rotations */ 411 C2D_DRIVER_SUPPORTS_ALL_CAPABILITIES_OP = ((0xFFFFFFFF) >> (31 - 17)) /* mask for all capabilities supported */ 412} C2D_DRIVER_CAPABILITIES; 413 414/* 2D driver workaround bits used by the 2D applications */ 415typedef enum { 416 C2D_DRIVER_WORKAROUND_NONE = 0, /* NO workaround */ 417 C2D_DRIVER_WORKAROUND_SWAP_UV_FOR_YUV_TARGET = (1 << 0), /* Swap UV when this flag set */ 418} C2D_DRIVER_WORKAROUND; 419 420/* Structure to query Driver information */ 421typedef struct { 422 uint32 capabilities_mask; 423 uint32 workaround_mask; 424 uint32 reserved1; 425 uint32 reserved2; 426 uint32 reserved3; 427} C2D_DRIVER_INFO; 428 429/* Structure to query Driver information */ 430typedef struct { 431 uint32 max_surface_template_needed; 432 uint32 reserved1; 433 uint32 reserved2; 434 uint32 reserved3; 435} C2D_DRIVER_SETUP_INFO; 436 437/*****************************************************************************/ 438/**************************** C2D API 2.0 ********************************/ 439/*****************************************************************************/ 440 441/****************************************************************************** 442 * Functions to create/destroy surfaces */ 443 444/* Creates a generic blit surface according to its type. 445 * Pass a combination of desired surface bits according to planned usage. 446 * Accepted values for surface_bits may include bits from C2D_SURFACE_BITS, 447 * and also from C2D_DISPLAY for compatibility with HW display controller. 448 * For host memory types the memory is preallocated outside the API 449 * and should remain valid until surface is destroyed. 450 * For external memory types the memory is allocated within API. 451 * On success, the non-zero surface identifier is returned. 452 * All numbers greater that 0 are valid surface identifiers, 0 is invalid. 453 454 * Host memory RGB surface: 455 * surface_type = C2D_SURFACE_RGB_HOST 456 * surface_definition = C2D_RGB_SURFACE_DEF 457 * all fields in definition structure should be set 458 459 * External memory RGB surface: 460 * surface_type = C2D_SURFACE_RGB_EXT 461 * surface_definition = C2D_RGB_SURFACE_DEF 462 * buffer field in definition structure is ignored 463 464 * Host memory YUV surface: 465 * surface_type = C2D_SURFACE_YUV_HOST 466 * surface_definition = C2D_YUV_SURFACE_DEF 467 * one or all plane and stride fields in definition structure 468 * should be set depending on whether the format is planar or not 469 470 * External memory YUV surface: 471 * surface_type = C2D_SURFACE_YUV_EXT 472 * surface_definition = C2D_YUV_SURFACE_DEF 473 * all plane and stride fields in definition structure are ignored */ 474C2D_API C2D_STATUS c2dCreateSurface( uint32 *surface_id, 475 uint32 surface_bits, 476 C2D_SURFACE_TYPE surface_type, 477 void *surface_definition ); 478 479/* Requests properties of the specified surface. */ 480C2D_API C2D_STATUS c2dQuerySurface( uint32 surface_id, 481 uint32 *surface_bits, 482 C2D_SURFACE_TYPE *surface_type, 483 uint32 *width, uint32 *height, 484 uint32 *format ); 485 486/* Destroys a generic blit surface. 487 * For external memory surfaces also deallocates the memory. 488 * It is safe to free any external resources associated with a given 489 * surface on c2dCreateSurface call after this function returns. */ 490C2D_API C2D_STATUS c2dDestroySurface( uint32 surface_id ); 491 492 493/****************************************************************************** 494 * Functions to modify/exchange surface data */ 495 496/* The format of fill_color is the same as color format being used 497 * for specified surface. If fill_rect is NULL the whole surface is filled. 498 * Alpha-blending is not performed while filling. 499 * The operation is complete when function returns. */ 500C2D_API C2D_STATUS c2dFillSurface( uint32 surface_id, 501 uint32 fill_color, 502 C2D_RECT *fill_rect ); 503 504/* Writes data located in host memory into the specified surface. 505 * The chunk of host memory is identified with surface_type and 506 * surface_definition, no surface registration needed in this case. 507 * Only C2D_SURFACE_RGB_HOST, C2D_SURFACE_YUV_HOST are accepted. 508 * If only part of the host memory buffer should be loaded, it should 509 * be configured in surface_definition using width, height and stride. 510 * The x and y are defined in target surface coordinate space. 511 * Color conversion has to be done, if color formats differ. 512 * Alpha-blending is not performed while writing. 513 * The operation is complete when function returns. */ 514C2D_API C2D_STATUS c2dWriteSurface( uint32 surface_id, 515 C2D_SURFACE_TYPE surface_type, 516 void *surface_definition, 517 int32 x, int32 y ); 518 519/* Reads data from the specified surface into the host memory. 520 * The chunk of host memory is identified with surface_type and 521 * surface_definition, no surface registration needed in this case. 522 * Only C2D_SURFACE_RGB_HOST, C2D_SURFACE_YUV_HOST are accepted. 523 * If only part of the surface should be read, it should 524 * be configured in surface_definition using width, height and stride. 525 * The x and y are defined in source surface coordinate space. 526 * Color conversion has to be done, if color formats differ. 527 * Alpha-blending is not performed while reading. 528 * The operation is complete when function returns. */ 529C2D_API C2D_STATUS c2dReadSurface( uint32 surface_id, 530 C2D_SURFACE_TYPE surface_type, 531 void *surface_definition, 532 int32 x, int32 y ); 533 534/* Notifies c2d imlementation that surface has been updated from outside the API, 535 * if updated_rect is NULL then the whole surface has been updated. */ 536C2D_API C2D_STATUS c2dSurfaceUpdated( uint32 surface_id, 537 C2D_RECT *updated_rect ); 538 539/* Updates surface information. 540 * Could be called only for host surfaces set with parameter "C2D_SURFACE_WITH_PHYS". 541 * Count for surface planes have to be same than for already allocated surface */ 542C2D_API C2D_STATUS c2dUpdateSurface( uint32 surface_id, 543 uint32 surface_bits, 544 C2D_SURFACE_TYPE surface_type, 545 void *surface_definition ); 546 547/****************************************************************************** 548 * Functions to do actual blit */ 549 550/* Draw a list of blit objects into the given target. 551 * The target_config is a bitwise OR of values from C2D_TARGET_CONFIG. 552 * The target transformation creates the effect that target surface 553 * is transformed before the blit and then transformed back 554 * after blit, however no physical target transform is performed. 555 * The objects_list is a linked list of blit objects, no more 556 * than num_objects is drawn from the given list. 557 * If num_objects is 0, the whole list is drawn. 558 * The blit is not guaranteed to complete after function returns. */ 559C2D_API C2D_STATUS c2dDraw( uint32 target_id, 560 uint32 target_config, C2D_RECT *target_scissor, 561 uint32 target_mask_id, uint32 target_color_key, 562 C2D_OBJECT *objects_list, uint32 num_objects ); 563 564 565/* timstamp set in the blit commands flush */ 566typedef void* c2d_ts_handle; 567 568/* Forces any pending blit to complete for a given target. 569 * Non-blocking. All input surfaces for this target except those 570 * which are shared with other targets are expected to be immediately 571 * writable after client has been waiting returned timestamp with 572 * c2dWaitTimestamp funtion or c2dFinish has been called for same target */ 573C2D_API C2D_STATUS c2dFlush( uint32 target_id, c2d_ts_handle *timestamp); 574 575 576/* Waits the pending timestamp */ 577C2D_API C2D_STATUS c2dWaitTimestamp( c2d_ts_handle timestamp ); 578 579 580/* Forces any pending blit to complete for a given target. 581 * Blocking version, returns when blit is done. 582 * All input surfaces for this target except those which are shared with 583 * other targets are expected to be immediately 584 * writable after this function returns. */ 585C2D_API C2D_STATUS c2dFinish( uint32 target_id ); 586 587 588/*****************************************************************************/ 589/****************************** Display API **********************************/ 590/*****************************************************************************/ 591 592 593/* Display input enumeration */ 594typedef enum { 595 C2D_DISPLAY_INPUT_0 = 0, /*!< default input */ 596 C2D_DISPLAY_INPUT_1 = (1<<16), /*!< Overlay 1 */ 597 C2D_DISPLAY_INPUT_2 = (1<<17), /*!< Overlay 2... */ 598} C2D_DISPLAY_INPUT; 599 600 601/****************************************************************************** 602 * Functions for display output. */ 603 604/* Functionality described in this section is optional and is 605 * provided only for the cases when blit HW 606 * is tightly bound to the display controller. */ 607 608/* Display enumeration, may also be used in surface caps */ 609typedef enum { 610 C2D_DISPLAY_MAIN = (1 << 10), /* main display */ 611 C2D_DISPLAY_SECONDARY = (1 << 11), /* secondary display */ 612 C2D_DISPLAY_TV_OUT = (1 << 12), /* tv-out */ 613} C2D_DISPLAY; 614 615/* Display window enumeration */ 616typedef enum { 617 C2D_DISPLAY_OVERLAY = C2D_DISPLAY_INPUT_1, /*!< Overlay window bit. This defines display input. 618 When defined the surface is set on the overlay window 619 otherwise the surface is set on the background window. */ 620} C2D_DISPLAY_WINDOW; /*!< Window bit set with display parameter */ 621 622 623/* Display update modes */ 624typedef enum { 625 C2D_DISPLAY_MODE_TEAR_SYNC = (1 << 0), /* enables tearing sync */ 626 C2D_DISPLAY_MODE_SURF_REMOVE = (1 << 1), /* Remove surface from given display + input */ 627} C2D_DISPLAY_MODE; 628 629 630/* Sets the given surface as a current display front buffer. 631 * Several displays can be specified as an output if supported. 632 * Still only one input can be specified at a time fro display/displays. 633 * The surface remains shown until it gets replaced with another one. */ 634C2D_API C2D_STATUS c2dDisplaySetSurface( uint32 display, 635 uint32 surface_id, uint32 mode ); 636 637/* Returns the current surface for a particular display. 638 * Only one display can be specified at a time. 639 * The latest surface set with compDisplaySetSurface or 640 * the default pre-allocated surface is returned. */ 641C2D_API C2D_STATUS c2dDisplayGetSurface( uint32 display, 642 uint32 *surface_id ); 643 644/* Returns the properties for a particular display. 645 * Only one display can be specified at a time. */ 646C2D_API C2D_STATUS c2dDisplayGetProperties( uint32 display, 647 uint32 *width, uint32 *height, 648 uint32 *format ); 649 650/* Sets the properties for a particular display input. 651 * Only one display + input can be specified at a time. 652 * C2D_OBJECT used to set input rect(target rect), 653 * blending operations, rotation...etc for display source */ 654C2D_API C2D_STATUS c2dDisplaySetObject( uint32 display, 655 uint32 target_config, uint32 target_color_key, 656 C2D_OBJECT * c2dObject, uint32 mode); 657 658/* allows user to map a memory region to the gpu. only supported on linux 659 * mem_fd is the fd of the memory region, hostptr is the host pointer to the region, 660 * len and offset are the size and offset of the memory. 661 * flags is one of the memory types supported by gsl 662 * gpaddr is passed by refernce back to the user 663 */ 664C2D_API C2D_STATUS c2dMapAddr ( int mem_fd, void * hostptr, uint32 len, uint32 offset, uint32 flags, void ** gpuaddr); 665 666/* allows user to unmap memory region mapped by c2dMapAddr. 667 * gpaddr is the gpuaddr to unmap */ 668C2D_API C2D_STATUS c2dUnMapAddr (void * gpuaddr); 669 670/* allows user to query driver capabilities. 671 * driver_info is the information about driver */ 672C2D_API C2D_STATUS c2dGetDriverCapabilities( C2D_DRIVER_INFO * driver_info); 673 674/* create a fence fd for the timestamp */ 675C2D_API C2D_STATUS c2dCreateFenceFD( uint32 target_id, c2d_ts_handle timestamp, int32 *fd); 676 677/*****************************************************************************/ 678 679#ifdef __cplusplus 680} 681#endif 682 683#endif /* __c2d2_h_ */ 684