| edcc8d627804a0c1140542da2380c83a8c03b7a9 |
|
08-Oct-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Android: P2P: Fix restriction of GO channels on A-band
Bug: 11105901
Change-Id: Ibe8e85f47e95177700deedccb408f1eec85b8f3d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 03b5cdf515ae7259d67b33c22d829495ac80e631 |
|
15-Sep-2013 |
Hardik Kantilal Patel <hkpatel@qti.qualcomm.com> |
P2P: Prefer 20 MHz operating channels on 5 GHz band over 2.4 GHz
When no other user preference is specified, opt to use an operating
channel that allows 5 GHz band to be used rather than 2.4 GHz.
Previously, this was already done in practice for HT40 channels since no
such channel is enabled for P2P on 2.4 GHz. This commit extends this to
apply 5 GHz preference for 20 MHz channels as well.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| b7b4d0ec07161a6d76c40ba7ef1306e82fbb7e15 |
|
26-Aug-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 853b49a030c00fd6b2dde14e183ca2bf108eaa16
853b49a tests: Increase test_ap_wps_init connection timeout
28de68a P2P: Update peer operating channel from GO Negotiation Confirm
6701fdc P2P: Use the first pref_chan entry as operating channel preference
99d7c76 P2P: Add more debug info on operating channel selection
8d660e0 P2P: Add GO negotiation results into the P2P-GO-NEG-SUCCESS event
2c6f8cf Replace perror() with wpa_printf(strerror) in ctrl_iface calls
e743db4 IBSS RSN: Add IBSS-RSN-COMPLETED event message
4c55901 P2P: Add state info to global STATUS command
ae8c27f Add STATUS command to global control interface
42868f1 Add SAVE_CONFIG command to global control interface
1b9b31c Add SET command for global control interface
0185007 hostapd: Add survey dump support
245e026 hostapd: Split up channel checking into helpers
ba873bd wired: Wait for the link to become active before sending packets
d393de1 P2P: Validate the freq in p2p_group_add
973622c wpa_supplicant: Fix AP mode frequency initialization
d99ca89 P2P: Skip non-P2P interface in p2p_group_remove *
239abaf WPS: Set currently used RF band in RF Bands attribute
bf83eab nl80211: Start P2P Device when rfkill is unblocked
60b13c2 nl80211: Do not change type to station on P2P interfaces
e0591c3 wpa_supplicant: Reduce wait time for control interfaces
5046eb4 P2P: Allow separate interface GO to disconnect low-ack STAs
5bcd5c5 FT RRB: Clear pad field to avoid sending out uninitialized data
b378c41 nl80211: Fix deinit path to unregister nl_mgmt socket
a235aca Fix DETACH command debug prints to avoid use of freed memory
8d6e035 Make global UNIX socket non-blocking for ctrl_iface
86bd141 Change WEP network selection to reject WPA/WPA2 APs
2e145e9 WPS: Fix failure path to allow WSC_NACK and EAP-Failure to be exchanged
3351a38 WPS: Add control interface command for fetching latest status
e96872a WPS: Track peer MAC address from the last operations
ae23935 WPS: Track PBC status
61b6520 WPS: Track result of the latest WPS operation
50396e2 WPS: Add PBC mode activated/disabled events
961750c WPS: Share a common function for error strings
30158a0 nl80211: Update the assoc_freq during connect
83e7bb0 nl80211: Add more debug prints for DEL_STATION commands
Bug: 9056601
Change-Id: I8bc671eb13f4c2c388a4c15cf1ba968c24c9656a
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| b6e9aaf735990dc64cdb6efccc03d076768eabf3 |
|
20-May-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit d5b559b6418c2bd09663e0d09e93a6592357fdce
d5b559b WNM: Add disassociation timeout processing for ESS_DISASSOC
f65f539 GAS: Reduce query timeout to two seconds
7a56af5 GAS: Assign new dialog token even if previous one is free
9e1ecab GAS: Ignore replays if previous frag_id without dropping GAS session
fa7ae95 Add test code for fetching the last configured GTK
576bce9 P2P: Direct global ctrl_iface commands automatically for P2P
c4bf83a P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
7793c95 Clean up AP-STA-CONNECTED/DISCONNECTED prints
92c4465 P2P: Mark P2P events global (not specific to interface)
ed496f1 P2P: Clean up debug prints
710ae9a P2P: Move p2p_find stopped event message into p2p_supplicant.c
47bfe49 Add wpa_msg_global() for global events
214e428 Allow global ctrl_iface monitors
89c7ac5 wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
faf9a85 Add band option (2.4 vs. 5) for filtering scans
b83b1b2 Android: Clarify keystore include directories
6f1127c Android: Add a top level Android.mk
d2a9e2c Abstract and Android sockets for global ctrl_iface
6fd5cea wpa_cli: Allow global interface to be used in interactive mode
2925756 wpa_supplicant: Add -G argument to specify global ctrl group
cf3bebf Allow global ctrl_iface to be used for per-interface commands
058c863 FT RRB: Fix a memory leak on error path
Change-Id: I32a4afb43894167a30c4b0df18fd4846a2945c7c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 4b06059785b935dd1f4f09314e4e12c417d2c6a4 |
|
30-Apr-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit b57b560034f1bb1ad3a3892228940dde97323c0e
b57b560 wpa_supplicant: Default to nl80211 instead of wext
ee28f08 hostapd: Add more messages for error paths
61d2ce2 hostapd: Reject configuration file without interface parameter
a8a7890 Clear extra_blacklist_count on FLUSH command
c646862 WPS ER: Allow UPnP interface to be forced
728d971 Use status code 17 (unable to handle new STA) on max-STA limitation
5e24dc8 Add dup_binstr() to help common binary string tasks
8b44ad7 Use os_zalloc() instead of os_malloc() + os_memset()
2c48211 FT RRB: Validate os_malloc() return value before using it
7ca902b Make vlan_file optional if dynamic_vlan is used
bdb112d Add bitfield routines
04382f7 NFC: Add no waiting and no multiple operations options for scripts
fe90496 WPS: Fix AP auto configuration on config token generation
28fcfb6 NFC: Increase wpa_cli command buffer size
8f7a6dd WPS NFC: Allow Device Password ID override for selected registrar
aaecb69 WPS: Use generic MAC Address attribute builder
9ccd916 P2P: Clean up channel--frequency conversion functions
e864c0a Use a common frequency to channel conversion function
02db75b FT: Reset FT flag upon STA deauthentication
7800d45 P2P: Set P2P_DEV_PEER_WAITING_RESPONSE from TX status callback
d78d3c6 EAP peer: Add check before calling getSessionId method
dd57970 Disable network temporarily on repeated connection failures
Change-Id: If8078d5c1ff40ea806e844543cf6f2bf9d24b7ac
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 700a137ab366edc72e371da68ba187b4717ee660 |
|
15-Mar-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 565110cd554801fa301c55010b3e9e14f43d7973
nl80211: Include interface name in more debug prints
Convert WPS NFC python scripts from using wpactrl to wpaspy
wpa_supplicant: Fix lookup of cached PMKSA
Add capability flag for IBSS and add get_capability modes
hostapd: Fix client reassociation after disconnect due to ACK failure
Fix build with CONFIG_NO_CONFIG_BLOBS
Fix build without CONFIG_CTRL_IFACE or CONFIG_NO_STDOUT_DEBUG
libtommath: Avoid a compiler warning on unused variable
libtommath: Condition fast_s_mp_mul_digs() on LTM_FAST
P2P: Remove persistent group peer if it rejects invitation
P2P: Allow shared interface channel preference to be ignored
P2P: Fix shared frequency preference for concurrent operations
P2P: Use best-overall channel in p2p_reselect_channel()
P2P: Allow all channels for multi-channel concurrency (no negotiation)
TDLS: Disable link to existing peer with lower address
Fix compiler warning when CONFIG_IEEE80211R is not included
WPS NFC: Fix build without CONFIG_WPS_ER
FT: Add support for IEEE 802.11r with driver-based SME
Change-Id: I1d5ced870c33d5cb73ecc6f04e272a3cf50f344a
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 8c65289885e84727226d81b3d32856f79c31ee5f |
|
01-Mar-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 3a2a7c3da64563bfff7a0f46e3654f54a1eacbd1
P2P: Fix regression in GO Negotiation
P2P: Skip Listen phase when peer is expected to be waiting
P2P: Increase GO Negotiation timeouts
Change-Id: I77c8512067f49b46aea79d4bf394a0a24f4d0725
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 9cdf1b905fae57dea42506a1af67f6ece544b261 |
|
27-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 8cee87ab139e52516ee4185789b40a0459fa7406
P2P: Only schedule a single p2p_go_neg_start timeout at a time
P2P: Do not start new GO Neg on Probe Req when waiting for Confirm
P2P: Fail GO Negotiation on missing Group ID
P2P: Assign GO tie breaker bit at the same time with dialog token
Change-Id: Ie7d1a795988cd5e8420234392e9a83a3ad4165f0
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| a54fa5fb807eaeff45464139b5a7759f060cec68 |
|
15-Jan-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit dc013f1e37df3462085cf01a13f0c432f146ad7a
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue Jan 15 12:03:29 2013 +0200
eapol_test: Remove unnecessary header file inclusion
- P2P: Send P2P-FIND-STOPPED event in the new continue-search states
- P2P: Add some more details on Service Query TLV format
- P2P: Use the same Dialog Token value for every GO Negotiation retry
- P2P: Publish more connected clients info in Probe Response frames
- P2P: Fix some memory leaks in p2p_add_device()
- P2P: Use the same Dialog Token value for every PD retry
- P2P: Document operating channel selection functions
- P2P: Always re-select operating channel if not hard coded
- P2P: Do not allow re-selection of GO channel if forced_freq in use
- P2P: Set FORCE_FREQ flag as part of p2p_prepare_channel()
- P2P: Share a single function for GO channel selection
- P2P: Prefer operating channels where HT40 is possible
- P2P: Be more careful with wpa_config_update_psk() call
- P2P: Allow PSK to be used instead of passphrase for persistent GO
- P2P: Consider age for the P2P scan results
- Move some P2P offchannel operations to offchannel.c
- P2P: Add more complete description of p2p_cancel
- P2P: Allow p2p_cancel to be used to stop p2p_connect-join operation
- Interworking changes
- WNM changes
- WPS changes
- SAE changes
Change-Id: I38b847d3460066cc58aecbcf67266bfcff1d344e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| d5e4923d04122f81300fa68fb07d64ede28fd44d |
|
04-Dec-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f5f37d3a4fc2df2a24676b4f95afca15ed793cba
Author: Jouni Malinen <j@w1.fi>
Date: Sun Nov 25 22:05:32 2012 +0200
Fix REAUTHENTICATE command after PMKSA caching
The current PMKSA cache entry needs to be clear to allow EAPOL
reauthentication to be started in case this association used PMKSA
caching.
- Remove old WPS_OOB NCF
- WPS: Add preliminary NFC connection handover support for Enrollee
- WPS: Reenable the networks disabled during wpa_wpas_reassoc
- P2P: Avoid multi-channel scans when they are not needed
- P2P: Allow discoverable interval for p2p_find to be configured
- P2P: Allow all channels with multi-channel concurrency
- Bonjour changes
- Remove disassociate
- HS 2.0 changes
- Add preliminary support for using SQLite for eap_user database
- Add SAE support
- Add disallow_aps parameter to disallow BSSIDs/SSIDs
Change-Id: I85358a05b39d46b8db49acdad667e771c580b05c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 2c5b17df4c29abdf11a85216c2f6272af796c576 |
|
14-Oct-2012 |
Jouni Malinen <j@w1.fi> |
P2P: Improve robustness against lost ctrl::ack
P2P includes two use cases where one of the devices is going to start a
group and likely change channels immediately after processing a frame.
This operation may be fast enough to make the device leave the current
channel before the peer has completed layer 2 retransmission of the
frame in case the ctrl::ack frame was lost. This can result in the peer
not getting TX status success notification.
For GO Negotiation Confirm frame, p2p_go_neg_conf_cb() has a workaround
that ignores the TX status failure and will continue with the group
formation with the assumption that the peer actually received the frame
even though we did not receive ctrl::ack. For Invitation Response frame
to re-invoke a persistent group, no such workaround is used in
p2p_invitation_resp_cb(). Consequently, TX status failure due to lost
ctrl::ack frame results in one of the peers not starting the group.
Increase the likelihood of layer 2 retransmission getting acknowledged
and ctrl::ack being received by waiting a short duration after having
processed the GO Negotiation Confirm and Invitation Response frames for
the re-invocation case. For the former, use 20 ms wait since this case
has been worked around in deployed devices. For the latter, use 50 ms
wait to get even higher likelihood of getting ctrl::ack through since
deployed devices (and the current wpa_supplicant implementation) do not
have a workaround to ignore TX status failure.
20 ms is long enough to include at least couple of retries and that
should increase likelihood of getting ctrl::ack through quite a bit. The
longer 50 ms wait is likely to include full set of layer 2 retries.
Bug: 7282991
Change-Id: If063895046ff42fb52579bfb386281085bedce58
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 069fa2c39ec7120656a2ea8cca83c5ee41ddab60 |
|
25-Sep-2012 |
Irfan Sheriff <isheriff@google.com> |
Remove unnecessary channel list filtering
Operating channel is always set even without an STA connected. Remove
channel list filtering based on that.
Channel list is filtered in the p2p_connect and p2p_invite path based
on force_freq which is essentially the operating channel for STA
This patch helps fix WifiDirect b/w two android devices for SCC while at
the same time keeping channel compliance with WFD dongle
Bug: 7232932
Change-Id: Ie9524f9e45b6f997959c3359a81b05f63b576045
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 91c40cdce17424d9a4718876becf0b7811cf68f2 |
|
25-Sep-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: P2P-related fixes
- P2P: Show own channel list in debug log
- P2P: Allow peer to propose channel in invitation process
- P2P: Clear sta_scan_pending on group removal
- P2P: Fix ignoring of PD Response due to dialog token mismatch
BUG: 7226065, 7231289
Change-Id: Iacb0f85d80f63bcdf311ccc0d29d0c282a0c0576
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| f06196652a3e12af00503f4a548c56d4e60f7246 |
|
24-Sep-2012 |
Irfan Sheriff <isheriff@google.com> |
Fix build: Add ANDROID_P2P for SCC interop fixes
Change-Id: I847b63428b47016cf9a9a0b090636e1d5b9d28b8
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| af84a575044f6556994fcc124a955fc0ac0a6736 |
|
23-Sep-2012 |
Irfan Sheriff <isheriff@google.com> |
GC channel fixes for better interop with SCC
- Force operating channel as the only channel in channel list attribute for go negotiation
and persistence
- Force an operating channel in go negotiation response even if the GO indicates a different
in negotiation request
- Fix a bug with updating peer operating channel based on GO negotiation confirm
Bug: 7217600
Change-Id: I6da0dc1a49c1d99ae97dcab8ee9899e07a80a6cb
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 61d9df3e62aaa0e87ad05452fcb95142159a17b6 |
|
30-Aug-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 29-Aug-2012 TOT
commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Fri Mar 2 22:31:04 2012 +0200
WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Change-Id: I9d63acce719b982c02e589bb59602382e82988c8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 04949598a23f501be6eec21697465fd46a28840a |
|
19-Jul-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 07-Jul-2012 TOT
commit a5ed45586c63ffd8f9d2b44e27c251d7bacbeaf4
Author: Jouni Malinen <j@w1.fi>
Date: Sat Jul 7 13:01:45 2012 +0300
WPS SSDP: Fix socket leaks on error paths
Change-Id: I0864aac7fc88fa2a60f5cca7d524b94363410c85
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 98f9e76624da6bb96edc1982c423e4a119c5170a |
|
30-May-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to Version 0.8.27 from BRCM
- Fix crash during TRUE pbc overlap
- Fix p2p_stop_find event
- Avoid race condition in GO-NEG process if both peers enter
p2p_connect at the same time
- Retry assoc immediately on ASSOC-REJECT. Previously assoc was
retried on authentication timeout (which occurs after 10secs).
Now on assoc reject, we cancel the auth timer and then initiate
a assoc scan.
BUG: 6543705, 6427094
Change-Id: I4489fb14b6cead069f0d14fcbb9e2224f790d77b
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 497c1d5e50162d6b3c1cce5dbd9c5fd9da69aaef |
|
22-Jul-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
Add P2P support for BRCM CFG80211 driver
Change-Id: Iafec4bedbd33836d0a64e7ea054d8a46ef8ec204
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/p2p/p2p_go_neg.c
|