1/****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19/****************************************************************************** 20 * 21 * this file contains the main Bluetooth Manager (BTM) internal 22 * definitions. 23 * 24 ******************************************************************************/ 25#ifndef BTM_INT_H 26#define BTM_INT_H 27 28#include "bt_target.h" 29#include "gki.h" 30#include "hcidefs.h" 31 32#if RFCOMM_INCLUDED == TRUE 33#include "rfcdefs.h" 34#endif 35 36#include "btm_api.h" 37 38#if (BLE_INCLUDED == TRUE) 39#include "btm_ble_int.h" 40#if (SMP_INCLUDED == TRUE) 41#include "smp_api.h" 42#endif 43#endif 44 45#if BTM_MAX_LOC_BD_NAME_LEN > 0 46typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1]; 47#endif 48 49#define BTM_ACL_IS_CONNECTED(bda) (btm_bda_to_acl (bda, BT_TRANSPORT_BR_EDR) != NULL) 50 51/* Definitions for Server Channel Number (SCN) management 52*/ 53#define BTM_MAX_SCN PORT_MAX_RFC_PORTS 54 55/* Define masks for supported and exception 2.0 ACL packet types 56*/ 57#define BTM_ACL_SUPPORTED_PKTS_MASK (HCI_PKT_TYPES_MASK_DM1 | \ 58 HCI_PKT_TYPES_MASK_DH1 | \ 59 HCI_PKT_TYPES_MASK_DM3 | \ 60 HCI_PKT_TYPES_MASK_DH3 | \ 61 HCI_PKT_TYPES_MASK_DM5 | \ 62 HCI_PKT_TYPES_MASK_DH5) 63 64#define BTM_ACL_EXCEPTION_PKTS_MASK (HCI_PKT_TYPES_MASK_NO_2_DH1 | \ 65 HCI_PKT_TYPES_MASK_NO_3_DH1 | \ 66 HCI_PKT_TYPES_MASK_NO_2_DH3 | \ 67 HCI_PKT_TYPES_MASK_NO_3_DH3 | \ 68 HCI_PKT_TYPES_MASK_NO_2_DH5 | \ 69 HCI_PKT_TYPES_MASK_NO_3_DH5) 70 71#define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]) && \ 72 HCI_ATOMIC_ENCRYPT_SUPPORTED(btm_cb.devcb.local_lmp_features[HCI_EXT_FEATURES_PAGE_0])) \ 73 ? TRUE : FALSE) 74 75#define BTM_IS_BRCM_CONTROLLER() (btm_cb.devcb.local_version.manufacturer == LMP_COMPID_BROADCOM) 76 77/* Define the ACL Management control structure 78*/ 79typedef struct 80{ 81 UINT16 hci_handle; 82 UINT16 pkt_types_mask; 83 UINT16 restore_pkt_types; /* when coming in/out of SCO connection restore the packet types */ 84 UINT16 clock_offset; 85 BD_ADDR remote_addr; 86 DEV_CLASS remote_dc; 87 BD_NAME remote_name; 88 89 UINT16 manufacturer; 90 UINT16 lmp_subversion; 91 UINT16 link_super_tout; 92 BD_FEATURES peer_lmp_features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Peer LMP Extended features mask table for the device */ 93 UINT8 num_read_pages; 94 UINT8 lmp_version; 95 96 BOOLEAN in_use; 97 UINT8 link_role; 98 BOOLEAN link_up_issued; /* True if busy_level link up has been issued */ 99 100#define BTM_ACL_SWKEY_STATE_IDLE 0 101#define BTM_ACL_SWKEY_STATE_MODE_CHANGE 1 102#define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF 2 103#define BTM_ACL_SWKEY_STATE_SWITCHING 3 104#define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON 4 105#define BTM_ACL_SWKEY_STATE_IN_PROGRESS 5 106 UINT8 switch_role_state; 107 UINT8 change_key_state; 108 109#define BTM_ACL_ENCRYPT_STATE_IDLE 0 110#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF 1 /* encryption turning off */ 111#define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC 2 /* temporarily off for change link key or role switch */ 112#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON 3 /* encryption turning on */ 113 UINT8 encrypt_state; /* overall BTM encryption state */ 114 115#if BTM_PWR_MGR_INCLUDED == FALSE 116 UINT8 mode; 117#endif /* BTM_PWR_MGR_INCLUDED */ 118 119#if BLE_INCLUDED == TRUE 120 tBT_TRANSPORT transport; 121 BD_ADDR conn_addr; /* local device address used for this connection */ 122 UINT8 conn_addr_type; /* local device address type for this connection */ 123 BD_ADDR active_remote_addr; /* remote address used on this connection */ 124 UINT8 active_remote_addr_type; /* local device address type for this connection */ 125 BD_FEATURES peer_le_features; /* Peer LE Used features mask for the device */ 126 127#endif 128 129} tACL_CONN; 130 131/***************************************************** 132** TIMER Definitions 133******************************************************/ 134#define TT_DEV_RESET 1 135#define TT_DEV_RLN 2 136#define TT_DEV_RLNKP 4 /* Read Link Policy Settings */ 137 138/* Define the Device Management control structure 139*/ 140typedef struct 141{ 142 tBTM_DEV_STATUS_CB *p_dev_status_cb; /* Device status change callback */ 143 tBTM_VS_EVT_CB *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS]; /* Register for vendor specific events */ 144 145 tBTM_CMPL_CB *p_stored_link_key_cmpl_cb; /* Read/Write/Delete stored link key */ 146 147 TIMER_LIST_ENT reset_timer; 148 tBTM_CMPL_CB *p_reset_cmpl_cb; /* Callback function to be called */ 149 /* when startup of the device is done */ 150 TIMER_LIST_ENT rln_timer; 151 tBTM_CMPL_CB *p_rln_cmpl_cb; /* Callback function to be called when */ 152 /* read local name function complete */ 153 TIMER_LIST_ENT rlinkp_timer; 154 tBTM_CMPL_CB *p_rlinkp_cmpl_cb; /* Callback function to be called when */ 155 /* read link policy function completes */ 156 TIMER_LIST_ENT rssi_timer; 157 tBTM_CMPL_CB *p_rssi_cmpl_cb; /* Callback function to be called when */ 158 /* read rssi function completes */ 159 TIMER_LIST_ENT lnk_quality_timer; 160 tBTM_CMPL_CB *p_lnk_qual_cmpl_cb;/* Callback function to be called when */ 161 /* read link quality function completes */ 162 TIMER_LIST_ENT txpwer_timer; 163 tBTM_CMPL_CB *p_txpwer_cmpl_cb; /* Callback function to be called when */ 164 /* read inq tx power function completes */ 165 166 TIMER_LIST_ENT qossu_timer; 167 tBTM_CMPL_CB *p_qossu_cmpl_cb; /* Callback function to be called when */ 168 /* qos setup function completes */ 169 170 tBTM_ROLE_SWITCH_CMPL switch_role_ref_data; 171 tBTM_CMPL_CB *p_switch_role_cb; /* Callback function to be called when */ 172 /* requested switch role is completed */ 173 174 tBTM_CHANGE_KEY_CMPL chg_link_key_ref_data; 175 tBTM_CMPL_CB *p_chg_link_key_cb; /* Callback function to be called when */ 176 /* change of link key is completed */ 177 178 TIMER_LIST_ENT tx_power_timer; 179 tBTM_CMPL_CB *p_tx_power_cmpl_cb;/* Callback function to be called */ 180 181 BD_ADDR local_addr; /* BD_ADDR of the local device */ 182 tBTM_VERSION_INFO local_version; /* Local Version Information */ 183 DEV_CLASS dev_class; /* Local device class */ 184 185 /* Local LMP Extended features mask table for the device */ 186 BD_FEATURES local_lmp_features[HCI_EXT_FEATURES_PAGE_MAX + 1]; 187 188#if BLE_INCLUDED == TRUE 189 190 tBTM_CMPL_CB *p_le_test_cmd_cmpl_cb; /* Callback function to be called when 191 LE test mode command has been sent successfully */ 192 193 BD_ADDR read_tx_pwr_addr; /* read TX power target address */ 194 BD_FEATURES local_le_features; /* Local LE Supported features mask for the device */ 195 196 tBTM_BLE_LOCAL_ID_KEYS id_keys; /* local BLE ID keys */ 197 BT_OCTET16 er; /* BLE encryption key */ 198 199#define BTM_LE_SUPPORT_STATE_SIZE 8 200UINT8 le_supported_states[BTM_LE_SUPPORT_STATE_SIZE]; 201 202 203 204#if BTM_BLE_CONFORMANCE_TESTING == TRUE 205 BOOLEAN no_disc_if_pair_fail; 206 BOOLEAN enable_test_mac_val; 207 BT_OCTET8 test_mac; 208 BOOLEAN enable_test_local_sign_cntr; 209 UINT32 test_local_sign_cntr; 210#endif 211 212 213#endif /* BLE_INCLUDED */ 214 215#define BTM_DEV_STATE_WAIT_RESET_CMPLT 0 216#define BTM_DEV_STATE_WAIT_AFTER_RESET 1 217#define BTM_DEV_STATE_READY 2 218 219 UINT8 state; 220 tBTM_IO_CAP loc_io_caps; /* IO capability of the local device */ 221 tBTM_AUTH_REQ loc_auth_req; /* the auth_req flag */ 222 BD_FEATURES brcm_features; /* Broadcom specific features bit mask */ 223#define BTM_RELOAD_LE_HOST_FEATURE 0x10 224 225#define BTM_RE_READ_1ST_PAGE 0x01 /* Set it if you set at least one of "..._HOST_MAY_SUPP_..." bits */ 226#define BTM_HOST_MAY_SUPP_SSP 0x02 227#define BTM_HOST_MAY_SUPP_LE 0x04 228#define BTM_HOST_MAY_SUPP_SIMULT_BR_LE 0x08 229 UINT8 lmp_features_host_may_support; /* The flags of LMP features host may support via BR/EDR ctrlr + BTM_RE_READ_1ST_PAGE */ 230 UINT8 supported_cmds[HCI_NUM_SUPP_COMMANDS_BYTES]; /* Supported Commands bit field */ 231 232} tBTM_DEVCB; 233 234 235/* Define the structures and constants used for inquiry 236*/ 237 238/* Definitions of limits for inquiries */ 239#define BTM_PER_INQ_MIN_MAX_PERIOD HCI_PER_INQ_MIN_MAX_PERIOD 240#define BTM_PER_INQ_MAX_MAX_PERIOD HCI_PER_INQ_MAX_MAX_PERIOD 241#define BTM_PER_INQ_MIN_MIN_PERIOD HCI_PER_INQ_MIN_MIN_PERIOD 242#define BTM_PER_INQ_MAX_MIN_PERIOD HCI_PER_INQ_MAX_MIN_PERIOD 243#define BTM_MAX_INQUIRY_LENGTH HCI_MAX_INQUIRY_LENGTH 244#define BTM_MIN_INQUIRY_LEN 0x01 245 246#define BTM_MIN_INQ_TX_POWER -70 247#define BTM_MAX_INQ_TX_POWER 20 248 249#if BTM_USE_INQ_RESULTS_FILTER == TRUE 250typedef struct 251{ 252 UINT32 inq_count; /* Used for determining if a response has already been */ 253 /* received for the current inquiry operation. (We do not */ 254 /* want to flood the caller with multiple responses from */ 255 /* the same device. */ 256 BD_ADDR bd_addr; 257} tINQ_BDADDR; 258#endif 259 260typedef struct 261{ 262 UINT32 time_of_resp; 263 UINT32 inq_count; /* "timestamps" the entry with a particular inquiry count */ 264 /* Used for determining if a response has already been */ 265 /* received for the current inquiry operation. (We do not */ 266 /* want to flood the caller with multiple responses from */ 267 /* the same device. */ 268 tBTM_INQ_INFO inq_info; 269 BOOLEAN in_use; 270 271#if (BLE_INCLUDED == TRUE) 272 BOOLEAN scan_rsp; 273#endif 274} tINQ_DB_ENT; 275 276 277enum 278{ 279 INQ_NONE, 280 INQ_LE_OBSERVE, 281 INQ_GENERAL 282}; 283typedef UINT8 tBTM_INQ_TYPE; 284 285typedef struct 286{ 287 tBTM_CMPL_CB *p_remname_cmpl_cb; 288 289#define BTM_EXT_RMT_NAME_TIMEOUT 40 290 291 292 TIMER_LIST_ENT rmt_name_timer_ent; 293 294 UINT16 discoverable_mode; 295 UINT16 connectable_mode; 296 UINT16 page_scan_window; 297 UINT16 page_scan_period; 298 UINT16 inq_scan_window; 299 UINT16 inq_scan_period; 300 UINT16 inq_scan_type; 301 UINT16 page_scan_type; /* current page scan type */ 302 tBTM_INQ_TYPE scan_type; 303 304 BD_ADDR remname_bda; /* Name of bd addr for active remote name request */ 305#define BTM_RMT_NAME_INACTIVE 0 306#define BTM_RMT_NAME_EXT 0x1 /* Initiated through API */ 307#define BTM_RMT_NAME_SEC 0x2 /* Initiated internally by security manager */ 308#define BTM_RMT_NAME_INQ 0x4 /* Remote name initiated internally by inquiry */ 309 BOOLEAN remname_active; /* State of a remote name request by external API */ 310 311 tBTM_CMPL_CB *p_inq_cmpl_cb; 312 tBTM_INQ_RESULTS_CB *p_inq_results_cb; 313 tBTM_CMPL_CB *p_inq_ble_cmpl_cb; /*completion callback exclusively for LE Observe*/ 314 tBTM_INQ_RESULTS_CB *p_inq_ble_results_cb;/*results callback exclusively for LE observe*/ 315 tBTM_CMPL_CB *p_inqfilter_cmpl_cb; /* Called (if not NULL) after inquiry filter completed */ 316 tBTM_INQ_DB_CHANGE_CB *p_inq_change_cb; /* Inquiry database changed callback */ 317 UINT32 inq_counter; /* Counter incremented each time an inquiry completes */ 318 /* Used for determining whether or not duplicate devices */ 319 /* have responded to the same inquiry */ 320 TIMER_LIST_ENT inq_timer_ent; 321#if BTM_USE_INQ_RESULTS_FILTER == TRUE 322 tINQ_BDADDR *p_bd_db; /* Pointer to memory that holds bdaddrs */ 323 UINT16 num_bd_entries; /* Number of entries in database */ 324 UINT16 max_bd_entries; /* Maximum number of entries that can be stored */ 325#endif 326 tINQ_DB_ENT inq_db[BTM_INQ_DB_SIZE]; 327 tBTM_INQ_PARMS inqparms; /* Contains the parameters for the current inquiry */ 328 tBTM_INQUIRY_CMPL inq_cmpl_info; /* Status and number of responses from the last inquiry */ 329 330 UINT16 per_min_delay; /* Current periodic minimum delay */ 331 UINT16 per_max_delay; /* Current periodic maximum delay */ 332 BOOLEAN inqfilt_active; 333 UINT8 pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */ 334 /* inquiry that has been cancelled*/ 335 UINT8 inqfilt_type; /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */ 336 337#define BTM_INQ_INACTIVE_STATE 0 338#define BTM_INQ_CLR_FILT_STATE 1 /* Currently clearing the inquiry filter preceeding the inquiry request */ 339 /* (bypassed if filtering is not used) */ 340#define BTM_INQ_SET_FILT_STATE 2 /* Sets the new filter (or turns off filtering) in this state */ 341#define BTM_INQ_ACTIVE_STATE 3 /* Actual inquiry or periodic inquiry is in progress */ 342#define BTM_INQ_REMNAME_STATE 4 /* Remote name requests are active */ 343 344 UINT8 state; /* Current state that the inquiry process is in */ 345 UINT8 inq_active; /* Bit Mask indicating type of inquiry is active */ 346 BOOLEAN no_inc_ssp; /* TRUE, to stop inquiry on incoming SSP */ 347#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 348 btm_inq_state next_state; /*interleaving state to determine next mode to be inquired*/ 349#endif 350} tBTM_INQUIRY_VAR_ST; 351 352/* The MSB of the clock offset field indicates that the offset is valid if TRUE */ 353#define BTM_CLOCK_OFFSET_VALID 0x8000 354 355/* Define the structures needed by security management 356*/ 357 358#define BTM_SEC_INVALID_HANDLE 0xFFFF 359 360typedef UINT8 *BTM_BD_NAME_PTR; /* Pointer to Device name */ 361 362/* Security callback is called by this unit when security 363** procedures are completed. Parameters are 364** BD Address of remote 365** Result of the operation 366*/ 367typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK; 368 369typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ; 370 371/* MACROs to convert from SCO packet types mask to ESCO and back */ 372#define BTM_SCO_PKT_TYPE_MASK ( HCI_PKT_TYPES_MASK_HV1 \ 373 | HCI_PKT_TYPES_MASK_HV2 \ 374 | HCI_PKT_TYPES_MASK_HV3) 375 376/* Mask defining only the SCO types of an esco packet type */ 377#define BTM_ESCO_PKT_TYPE_MASK ( HCI_ESCO_PKT_TYPES_MASK_HV1 \ 378 | HCI_ESCO_PKT_TYPES_MASK_HV2 \ 379 | HCI_ESCO_PKT_TYPES_MASK_HV3) 380 381#define BTM_SCO_2_ESCO(scotype) ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5)) 382#define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5)) 383 384/* Define masks for supported and exception 2.0 SCO packet types 385*/ 386#define BTM_SCO_SUPPORTED_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_HV1 | \ 387 HCI_ESCO_PKT_TYPES_MASK_HV2 | \ 388 HCI_ESCO_PKT_TYPES_MASK_HV3 | \ 389 HCI_ESCO_PKT_TYPES_MASK_EV3 | \ 390 HCI_ESCO_PKT_TYPES_MASK_EV4 | \ 391 HCI_ESCO_PKT_TYPES_MASK_EV5) 392 393#define BTM_SCO_EXCEPTION_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 | \ 394 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ 395 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 | \ 396 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5) 397 398 399#define BTM_SCO_ROUTE_UNKNOWN 0xff 400 401/* Define the structure that contains (e)SCO data */ 402typedef struct 403{ 404 tBTM_ESCO_CBACK *p_esco_cback; /* Callback for eSCO events */ 405 tBTM_ESCO_PARAMS setup; 406 tBTM_ESCO_DATA data; /* Connection complete information */ 407 UINT8 hci_status; 408} tBTM_ESCO_INFO; 409 410/* Define the structure used for SCO Management 411*/ 412typedef struct 413{ 414 tBTM_ESCO_INFO esco; /* Current settings */ 415#if BTM_SCO_HCI_INCLUDED == TRUE 416 BUFFER_Q xmit_data_q; /* SCO data transmitting queue */ 417#endif 418 tBTM_SCO_CB *p_conn_cb; /* Callback for when connected */ 419 tBTM_SCO_CB *p_disc_cb; /* Callback for when disconnect */ 420 UINT16 state; /* The state of the SCO link */ 421 UINT16 hci_handle; /* HCI Handle */ 422 BOOLEAN is_orig; /* TRUE if the originator */ 423 BOOLEAN rem_bd_known; /* TRUE if remote BD addr known */ 424 425} tSCO_CONN; 426 427/* SCO Management control block */ 428typedef struct 429{ 430 tBTM_SCO_IND_CBACK *app_sco_ind_cb; 431#if BTM_SCO_HCI_INCLUDED == TRUE 432 tBTM_SCO_DATA_CB *p_data_cb; /* Callback for SCO data over HCI */ 433 UINT32 xmit_window_size; /* Total SCO window in bytes */ 434#endif 435 tSCO_CONN sco_db[BTM_MAX_SCO_LINKS]; 436 tBTM_ESCO_PARAMS def_esco_parms; 437 BD_ADDR xfer_addr; 438 UINT16 sco_disc_reason; 439 BOOLEAN esco_supported; /* TRUE if 1.2 cntlr AND supports eSCO links */ 440 tBTM_SCO_TYPE desired_sco_mode; 441 tBTM_SCO_TYPE xfer_sco_type; 442 tBTM_SCO_PCM_PARAM sco_pcm_param; 443 tBTM_SCO_CODEC_TYPE codec_in_use; /* None, CVSD, MSBC, etc. */ 444#if BTM_SCO_HCI_INCLUDED == TRUE 445 tBTM_SCO_ROUTE_TYPE sco_path; 446#endif 447 448} tSCO_CB; 449 450 451#if BTM_SCO_INCLUDED == TRUE 452extern void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb ); 453extern void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup, 454 tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb); 455extern void btm_reject_sco_link(UINT16 sco_inx ); 456extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle); 457#else 458#define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb) 459#define btm_reject_sco_link(sco_inx) 460#define btm_set_sco_ind_cback(sco_ind_cb) 461#define btm_sco_chk_pend_rolechange(hci_handle) 462#endif /* BTM_SCO_INCLUDED */ 463 464/* 465** Define structure for Security Service Record. 466** A record exists for each service registered with the Security Manager 467*/ 468typedef struct 469{ 470 UINT32 mx_proto_id; /* Service runs over this multiplexer protocol */ 471 UINT32 orig_mx_chan_id; /* Channel on the multiplexer protocol */ 472 UINT32 term_mx_chan_id; /* Channel on the multiplexer protocol */ 473 UINT16 psm; /* L2CAP PSM value */ 474 UINT16 security_flags; /* Bitmap of required security features */ 475 UINT8 service_id; /* Passed in authorization callback */ 476#if (L2CAP_UCD_INCLUDED == TRUE) 477 UINT16 ucd_security_flags; /* Bitmap of required security features for UCD */ 478#endif 479#if BTM_SEC_SERVICE_NAME_LEN > 0 480 UINT8 orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 481 UINT8 term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 482#endif 483} tBTM_SEC_SERV_REC; 484 485#if BLE_INCLUDED == TRUE 486/* LE Security information of device in Slave Role */ 487typedef struct 488{ 489 BT_OCTET16 irk; /* peer diverified identity root */ 490 BT_OCTET16 ltk; /* peer long term key */ 491 BT_OCTET16 csrk; /* peer SRK peer device used to secured sign local data */ 492 493 BT_OCTET8 rand; /* random vector for LTK generation */ 494 UINT16 ediv; /* LTK diversifier of this slave device */ 495 UINT16 div; /* local DIV to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1) */ 496 UINT8 sec_level; /* local pairing security level */ 497 UINT8 key_size; /* key size of the LTK delivered to peer device */ 498 UINT8 srk_sec_level; /* security property of peer SRK for this device */ 499 UINT8 local_csrk_sec_level; /* security property of local CSRK for this device */ 500 501 UINT32 counter; /* peer sign counter for verifying rcv signed cmd */ 502 UINT32 local_counter; /* local sign counter for sending signed write cmd*/ 503}tBTM_SEC_BLE_KEYS; 504 505typedef struct 506{ 507 tBLE_ADDR_TYPE ble_addr_type; /* LE device type: public or random address */ 508 tBLE_ADDR_TYPE static_addr_type; /* static address type */ 509 BD_ADDR static_addr; /* static address */ 510#if BLE_PRIVACY_SPT == TRUE 511 BD_ADDR cur_rand_addr; /* current random address */ 512 513#define BTM_BLE_ADDR_PSEUDO 0 /* address index device record */ 514#define BTM_BLE_ADDR_RRA 1 /* cur_rand_addr */ 515#define BTM_BLE_ADDR_RECONN 2 /* reconnection address */ 516#define BTM_BLE_ADDR_STATIC 3 /* static_addr */ 517 UINT8 active_addr_type; 518 519 BOOLEAN privacy_enabled; /* remote device privacy enabled or not */ 520#endif 521 522#if SMP_INCLUDED == TRUE 523 tBTM_LE_KEY_TYPE key_type; /* bit mask of valid key types in record */ 524 tBTM_SEC_BLE_KEYS keys; /* LE device security info in slave rode */ 525#endif 526} tBTM_SEC_BLE; 527 528 529#endif /* BLE_INCLUDED */ 530 531/* 532** Define structure for Security Device Record. 533** A record exists for each device authenticated with this device 534*/ 535typedef struct 536{ 537 tBTM_SEC_SERV_REC *p_cur_service; 538 tBTM_SEC_CALLBACK *p_callback; 539 void *p_ref_data; 540 UINT32 timestamp; /* Timestamp of the last connection */ 541 UINT32 trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE]; /* Bitwise OR of trusted services */ 542 UINT16 hci_handle; /* Handle to connection when exists */ 543 UINT16 clock_offset; /* Latest known clock offset */ 544 BD_ADDR bd_addr; /* BD_ADDR of the device */ 545 DEV_CLASS dev_class; /* DEV_CLASS of the device */ 546 LINK_KEY link_key; /* Device link key */ 547 548#define BTM_SEC_AUTHORIZED BTM_SEC_FLAG_AUTHORIZED /* 0x01 */ 549#define BTM_SEC_AUTHENTICATED BTM_SEC_FLAG_AUTHENTICATED /* 0x02 */ 550#define BTM_SEC_ENCRYPTED BTM_SEC_FLAG_ENCRYPTED /* 0x04 */ 551#define BTM_SEC_NAME_KNOWN 0x08 552#define BTM_SEC_LINK_KEY_KNOWN BTM_SEC_FLAG_LKEY_KNOWN /* 0x10 */ 553#define BTM_SEC_LINK_KEY_AUTHED 0x20 554#define BTM_SEC_ROLE_SWITCHED 0x40 555#define BTM_SEC_IN_USE 0x80 556 /* LE link security flag */ 557#define BTM_SEC_LE_AUTHENTICATED 0x0200 /* 0x0200 */ 558#define BTM_SEC_LE_ENCRYPTED 0x0400 /* 0x04 */ 559#define BTM_SEC_LE_NAME_KNOWN 0x0800 560#define BTM_SEC_LE_LINK_KEY_KNOWN 0x1000 /* 0x10 */ 561#define BTM_SEC_LE_LINK_KEY_AUTHED 0x2000 562 563 UINT16 sec_flags; /* Current device security state */ 564 565 tBTM_BD_NAME sec_bd_name; /* User friendly name of the device. (may be truncated to save space in dev_rec table) */ 566 BD_FEATURES features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Features supported by the device */ 567 UINT8 num_read_pages; 568 569#define BTM_SEC_STATE_IDLE 0 570#define BTM_SEC_STATE_AUTHENTICATING 1 571#define BTM_SEC_STATE_ENCRYPTING 2 572#define BTM_SEC_STATE_GETTING_NAME 3 573#define BTM_SEC_STATE_AUTHORIZING 4 574#define BTM_SEC_STATE_SWITCHING_ROLE 5 575#define BTM_SEC_STATE_DISCONNECTING 6 576#define BTM_SEC_STATE_DELAY_FOR_ENC 7 /* delay to check for encryption to work around controller problems */ 577 578 UINT8 sec_state; /* Operating state */ 579 BOOLEAN is_originator; /* TRUE if device is originating connection */ 580#if (L2CAP_UCD_INCLUDED == TRUE) 581 BOOLEAN is_ucd; /* TRUE if device is sending or receiving UCD */ 582 /* if incoming security failed, received UCD will be discarded */ 583#endif 584 BOOLEAN role_master; /* TRUE if current mode is master */ 585 UINT16 security_required; /* Security required for connection */ 586 BOOLEAN link_key_not_sent; /* link key notification has not been sent waiting for name */ 587 UINT8 link_key_type; /* Type of key used in pairing */ 588 BOOLEAN link_key_changed; /* Changed link key during current connection */ 589 590#define BTM_MAX_PRE_SM4_LKEY_TYPE BTM_LKEY_TYPE_REMOTE_UNIT /* the link key type used by legacy pairing */ 591 592#define BTM_SM4_UNKNOWN 0x00 593#define BTM_SM4_KNOWN 0x10 594#define BTM_SM4_TRUE 0x11 595#define BTM_SM4_REQ_PEND 0x08 /* set this bit when getting remote features */ 596#define BTM_SM4_UPGRADE 0x04 /* set this bit when upgrading link key */ 597#define BTM_SM4_RETRY 0x02 /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */ 598#define BTM_SM4_DD_ACP 0x20 /* set this bit to indicate peer initiated dedicated bonding */ 599#define BTM_SM4_CONN_PEND 0x40 /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */ 600 UINT8 sm4; /* BTM_SM4_TRUE, if the peer supports SM4 */ 601 tBTM_IO_CAP rmt_io_caps; /* IO capability of the peer device */ 602 tBTM_AUTH_REQ rmt_auth_req; /* the auth_req flag as in the IO caps rsp evt */ 603 604#if (BLE_INCLUDED == TRUE) 605 UINT16 ble_hci_handle; /* use in DUMO connection */ 606 UINT8 enc_key_size; /* current link encryption key size */ 607 tBTM_SEC_BLE ble; 608 tBT_DEVICE_TYPE device_type; 609 tBTM_LE_CONN_PRAMS conn_params; 610#endif 611 612// btla-specific ++ 613#if BTM_DISC_DURING_RS == TRUE 614#define BTM_SEC_RS_NOT_PENDING 0 /* Role Switch not in progress */ 615#define BTM_SEC_RS_PENDING 1 /* Role Switch in progress */ 616#define BTM_SEC_DISC_PENDING 2 /* Disconnect is pending */ 617 UINT8 rs_disc_pending; 618#endif 619// btla-specific -- 620#define BTM_SEC_NO_LAST_SERVICE_ID 0 621 UINT8 last_author_service_id; /* ID of last serviced authorized: Reset after each l2cap connection */ 622 623} tBTM_SEC_DEV_REC; 624 625#define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE))) 626#define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE))) 627#define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE))) 628 629#define BTM_SEC_LE_MASK (BTM_SEC_LE_AUTHENTICATED|BTM_SEC_LE_ENCRYPTED|BTM_SEC_LE_LINK_KEY_KNOWN|BTM_SEC_LE_LINK_KEY_AUTHED) 630 631/* 632** Define device configuration structure 633*/ 634typedef struct 635{ 636#if BTM_MAX_LOC_BD_NAME_LEN > 0 637 tBTM_LOC_BD_NAME bd_name; /* local Bluetooth device name */ 638#endif 639 BOOLEAN pin_type; /* TRUE if PIN type is fixed */ 640 UINT8 pin_code_len; /* Bonding information */ 641 PIN_CODE pin_code; /* PIN CODE if pin type is fixed */ 642 BOOLEAN connectable; /* If TRUE page scan should be enabled */ 643 UINT8 def_inq_scan_mode; /* ??? limited/general/none */ 644} tBTM_CFG; 645 646#if BTM_PWR_MGR_INCLUDED == TRUE 647enum 648{ 649 BTM_PM_ST_ACTIVE = BTM_PM_STS_ACTIVE, 650 BTM_PM_ST_HOLD = BTM_PM_STS_HOLD, 651 BTM_PM_ST_SNIFF = BTM_PM_STS_SNIFF, 652 BTM_PM_ST_PARK = BTM_PM_STS_PARK, 653 BTM_PM_ST_PENDING = BTM_PM_STS_PENDING 654}; 655typedef UINT8 tBTM_PM_STATE; 656 657enum 658{ 659 BTM_PM_SET_MODE_EVT, /* Set power mode API is called. */ 660 BTM_PM_UPDATE_EVT, 661 BTM_PM_RD_MODE_EVT /* Read power mode API is called. */ 662}; 663typedef UINT8 tBTM_PM_EVENT; 664 665typedef struct 666{ 667 UINT16 event; 668 UINT16 len; 669 UINT8 link_ind; 670} tBTM_PM_MSG_DATA; 671 672typedef struct 673{ 674 UINT8 hci_status; 675 UINT8 mode; 676 UINT16 interval; 677} tBTM_PM_MD_CHG_DATA; 678 679typedef struct 680{ 681 UINT8 pm_id; /* the entity that calls SetPowerMode API */ 682 tBTM_PM_PWR_MD *p_pmd; 683} tBTM_PM_SET_MD_DATA; 684 685typedef struct 686{ 687 void *p_data; 688 UINT8 link_ind; 689} tBTM_PM_SM_DATA; 690 691typedef struct 692{ 693 tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/ 694 tBTM_PM_PWR_MD set_mode; /* the mode and parameters sent down to the host controller. */ 695 UINT16 interval; /* the interval from last mode change event. */ 696#if (BTM_SSR_INCLUDED == TRUE) 697 UINT16 max_lat; /* stored SSR maximum latency */ 698 UINT16 min_rmt_to;/* stored SSR minimum remote timeout */ 699 UINT16 min_loc_to;/* stored SSR minimum local timeout */ 700#endif 701 tBTM_PM_STATE state; /* contains the current mode of the connection */ 702 BOOLEAN chg_ind; /* a request change indication */ 703} tBTM_PM_MCB; 704 705#define BTM_PM_REC_NOT_USED 0 706typedef struct 707{ 708 tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */ 709 UINT8 mask; /* registered request mask. 0, if this entry is not used */ 710} tBTM_PM_RCB; 711#endif /* BTM_PWR_MGR_INCLUDED */ 712 713enum 714{ 715 BTM_BLI_ACL_UP_EVT, 716 BTM_BLI_ACL_DOWN_EVT, 717 BTM_BLI_PAGE_EVT, 718 BTM_BLI_PAGE_DONE_EVT, 719 BTM_BLI_INQ_EVT, 720 BTM_BLI_INQ_CANCEL_EVT, 721 BTM_BLI_INQ_DONE_EVT 722}; 723typedef UINT8 tBTM_BLI_EVENT; 724 725/* Pairing State */ 726enum 727{ 728 BTM_PAIR_STATE_IDLE, /* Idle */ 729 BTM_PAIR_STATE_GET_REM_NAME, /* Getting the remote name (to check for SM4) */ 730 BTM_PAIR_STATE_WAIT_PIN_REQ, /* Started authentication, waiting for PIN req (PIN is pre-fetched) */ 731 BTM_PAIR_STATE_WAIT_LOCAL_PIN, /* Waiting for local PIN code */ 732 BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM, /* Waiting user 'yes' to numeric confirmation */ 733 BTM_PAIR_STATE_KEY_ENTRY, /* Key entry state (we are a keyboard) */ 734 BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP, /* Waiting for local response to peer OOB data */ 735 BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS, /* Waiting for local IO capabilities and OOB data */ 736 BTM_PAIR_STATE_INCOMING_SSP, /* Incoming SSP (got peer IO caps when idle) */ 737 BTM_PAIR_STATE_WAIT_AUTH_COMPLETE, /* All done, waiting authentication cpmplete */ 738 BTM_PAIR_STATE_WAIT_DISCONNECT /* Waiting to disconnect the ACL */ 739}; 740typedef UINT8 tBTM_PAIRING_STATE; 741 742#define BTM_PAIR_FLAGS_WE_STARTED_DD 0x01 /* We want to do dedicated bonding */ 743#define BTM_PAIR_FLAGS_PEER_STARTED_DD 0x02 /* Peer initiated dedicated bonding */ 744#define BTM_PAIR_FLAGS_DISC_WHEN_DONE 0x04 /* Disconnect when done */ 745#define BTM_PAIR_FLAGS_PIN_REQD 0x08 /* set this bit when pin_callback is called */ 746#define BTM_PAIR_FLAGS_PRE_FETCH_PIN 0x10 /* set this bit when pre-fetch pin */ 747#define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20 /* set this bit when rejected incoming connection */ 748#define BTM_PAIR_FLAGS_WE_CANCEL_DD 0x40 /* set this bit when cancelling a bonding procedure */ 749#define BTM_PAIR_FLAGS_LE_ACTIVE 0x80 /* use this bit when SMP pairing is active */ 750 751 752typedef struct 753{ 754 BOOLEAN is_mux; 755 BD_ADDR bd_addr; 756 UINT16 psm; 757 BOOLEAN is_orig; 758 tBTM_SEC_CALLBACK *p_callback; 759 void *p_ref_data; 760 UINT32 mx_proto_id; 761 UINT32 mx_chan_id; 762} tBTM_SEC_QUEUE_ENTRY; 763 764#if (L2CAP_UCD_INCLUDED == TRUE) 765 766#define CONN_ORIENT_TERM 0x00 /* incoming connection oriented */ 767#define CONN_ORIENT_ORIG 0x01 /* outgoing connection oriented */ 768#define CONNLESS_TERM 0x02 /* incoming connectionless */ 769#define CONNLESS_ORIG 0x03 /* outgoing connectionless */ 770#define CONNECTION_TYPE_ORIG_MASK 0x01 /* mask for direction */ 771#define CONNECTION_TYPE_CONNLESS_MASK 0x02 /* mask for connectionless or not */ 772typedef UINT8 CONNECTION_TYPE; 773 774#else 775 776#define CONN_ORIENT_TERM FALSE 777#define CONN_ORIENT_ORIG TRUE 778typedef BOOLEAN CONNECTION_TYPE; 779 780#endif /* (L2CAP_UCD_INCLUDED == TRUE) */ 781 782/* Define a structure to hold all the BTM data 783*/ 784 785#define BTM_STATE_BUFFER_SIZE 5 /* size of state buffer */ 786 787#if (BTM_PCM2_INCLUDED == TRUE) 788/* Define pcm2_action */ 789enum 790{ 791 BTM_PCM2_ACT_NONE, 792 BTM_PCM2_ACT_SENT_ARC, 793 BTM_PCM2_READ_PARAM, 794 BTM_PCM2_WRITE_PARAM, 795}; 796typedef UINT8 tBTM_PCM2_ACTION; 797#endif 798 799typedef struct 800{ 801 tBTM_CFG cfg; /* Device configuration */ 802 803 /**************************************************** 804 ** ACL Management 805 ****************************************************/ 806 tACL_CONN acl_db[MAX_L2CAP_LINKS]; 807#if( RFCOMM_INCLUDED==TRUE) 808 UINT8 btm_scn[BTM_MAX_SCN]; /* current SCNs: TRUE if SCN is in use */ 809#endif 810 UINT16 btm_def_link_policy; 811 UINT16 btm_def_link_super_tout; 812 813#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 814 tBTM_BL_EVENT_MASK bl_evt_mask; 815 tBTM_BL_CHANGE_CB *p_bl_changed_cb; /* Callback for when Busy Level changed */ 816#else 817 tBTM_ACL_DB_CHANGE_CB *p_acl_changed_cb; /* Callback for when ACL DB changed */ 818#endif 819 820 tBTM_LSTO_CBACK *p_lsto_cback; /* for link supervision timeout change event */ 821 822 /**************************************************** 823 ** Power Management 824 ****************************************************/ 825#if BTM_PWR_MGR_INCLUDED == TRUE 826 tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS]; /* per ACL link */ 827 tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */ 828 UINT8 pm_pend_link; /* the index of acl_db, which has a pending PM cmd */ 829 UINT8 pm_pend_id; /* the id pf the module, which has a pending PM cmd */ 830#endif /* BTM_PWR_MGR_INCLUDED == TRUE */ 831 832 /***************************************************** 833 ** Device control 834 *****************************************************/ 835 tBTM_DEVCB devcb; 836 837 /***************************************************** 838 ** BLE Device controllers 839 *****************************************************/ 840#if (BLE_INCLUDED == TRUE) 841 tBTM_BLE_CB ble_ctr_cb; 842 843 UINT16 enc_handle; 844 BT_OCTET8 enc_rand; /* received rand value from LTK request*/ 845 UINT16 ediv; /* received ediv value from LTK request */ 846 UINT8 key_size; 847 tBTM_BLE_VSC_CB cmn_ble_vsc_cb; 848#endif 849 850 /* Packet types supported by the local device */ 851 UINT16 btm_acl_pkt_types_supported; 852 UINT16 btm_sco_pkt_types_supported; 853 854 855 /***************************************************** 856 ** Inquiry 857 *****************************************************/ 858 tBTM_INQUIRY_VAR_ST btm_inq_vars; 859 tBTM_FILTER_CB *p_inq_filter_cb; /* Callback that can be set if host */ 860 /* wants to verify inquiry filters */ 861 862 /***************************************************** 863 ** SCO Management 864 *****************************************************/ 865#if BTM_SCO_INCLUDED == TRUE 866 tSCO_CB sco_cb; 867#endif 868 869 /***************************************************** 870 ** Security Management 871 *****************************************************/ 872 tBTM_APPL_INFO api; 873 874#define BTM_SEC_MAX_RMT_NAME_CALLBACKS 2 875 tBTM_RMT_NAME_CALLBACK *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS]; 876 877 tBTM_FILTER_CB *p_conn_filter_cb; /* Callback that can be set if host */ 878 /* wants to verify connectability filters*/ 879 880 tBTM_SEC_DEV_REC *p_collided_dev_rec; 881 TIMER_LIST_ENT sec_collision_tle; 882 UINT32 collision_start_time; 883 UINT32 max_collision_delay; 884 UINT32 dev_rec_count; /* Counter used for device record timestamp */ 885 UINT8 security_mode; 886 BOOLEAN pairing_disabled; 887 BOOLEAN connect_only_paired; 888 BOOLEAN security_mode_changed; /* mode changed during bonding */ 889 BOOLEAN pin_type_changed; /* pin type changed during bonding */ 890 BOOLEAN sec_req_pending; /* TRUE if a request is pending */ 891// btla-specific ++ 892#ifdef PORCHE_PAIRING_CONFLICT 893 UINT8 pin_code_len_saved; /* for legacy devices */ 894#endif 895// btla-specific -- 896 897 UINT8 pin_code_len; /* for legacy devices */ 898 PIN_CODE pin_code; /* for legacy devices */ 899 tBTM_PAIRING_STATE pairing_state; /* The current pairing state */ 900 UINT8 pairing_flags; /* The current pairing flags */ 901 BD_ADDR pairing_bda; /* The device currently pairing */ 902 TIMER_LIST_ENT pairing_tle; /* Timer for pairing process */ 903 UINT16 disc_handle; /* for legacy devices */ 904 UINT8 disc_reason; /* for legacy devices */ 905 tBTM_SEC_SERV_REC sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS]; 906 tBTM_SEC_DEV_REC sec_dev_rec[BTM_SEC_MAX_DEVICE_RECORDS]; 907 tBTM_SEC_SERV_REC *p_out_serv; 908 tBTM_MKEY_CALLBACK *mkey_cback; 909 910 BD_ADDR connecting_bda; 911 DEV_CLASS connecting_dc; 912 913 UINT8 first_disabled_channel; 914 UINT8 last_disabled_channel; 915 916 UINT8 acl_disc_reason; 917 UINT8 trace_level; 918#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 919 UINT8 num_acl; /* num of active ACL links */ 920 UINT8 busy_level; /* the current busy level */ 921 BOOLEAN is_paging; /* TRUE, if paging is in progess */ 922 BOOLEAN is_inquiry; /* TRUE, if inquiry is in progess */ 923#endif 924 BUFFER_Q page_queue; 925 BOOLEAN paging; 926 BOOLEAN discing; 927 BUFFER_Q sec_pending_q; /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */ 928 929#if (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE)) 930 char state_temp_buffer[BTM_STATE_BUFFER_SIZE]; 931#endif 932 933#if (defined(BTM_PCM2_INCLUDED) && BTM_PCM2_INCLUDED == TRUE) 934 UINT16 sys_features; 935 UINT8 pcm2_params[BRCM_PCM2_SETUP_WRITE_SIZE]; 936 tBTM_PCM2_ACTION pcm2_action; 937#endif 938 939} tBTM_CB; 940 941 942#ifdef __cplusplus 943extern "C" 944{ 945#endif 946 947#if BTM_DYNAMIC_MEMORY == FALSE 948BTM_API extern tBTM_CB btm_cb; 949#else 950BTM_API extern tBTM_CB *btm_cb_ptr; 951#define btm_cb (*btm_cb_ptr) 952#endif 953 954/* Internal functions provided by btm_main.c 955******************************************** 956*/ 957extern void btm_init (void); 958 959/* Internal functions provided by btm_inq.c 960******************************************* 961*/ 962extern tBTM_STATUS btm_initiate_rem_name (BD_ADDR remote_bda, 963 tBTM_INQ_INFO *p_cur, 964 UINT8 origin, UINT32 timeout, 965 tBTM_CMPL_CB *p_cb); 966 967extern void btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len, 968 UINT8 hci_status); 969extern void btm_inq_rmt_name_failed(void); 970 971/* Inquiry related functions */ 972extern void btm_clr_inq_db (BD_ADDR p_bda); 973extern void btm_inq_db_init (void); 974extern void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode); 975extern void btm_process_inq_complete (UINT8 status, UINT8 mode); 976extern void btm_process_cancel_complete(UINT8 status, UINT8 mode); 977extern void btm_event_filter_complete (UINT8 *p); 978extern void btm_inq_stop_on_ssp(void); 979extern void btm_inq_clear_ssp(void); 980extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda); 981extern BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda); 982 983#if (BTM_EIR_CLIENT_INCLUDED == TRUE) 984extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr); 985#endif 986 987/* Internal functions provided by btm_acl.c 988******************************************** 989*/ 990extern void btm_acl_init (void); 991extern void btm_acl_timeout (TIMER_LIST_ENT *p_tle); 992extern void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, 993 UINT16 hci_handle, UINT8 link_role, tBT_TRANSPORT transport); 994extern void btm_acl_removed (BD_ADDR bda, tBT_TRANSPORT transport); 995extern void btm_acl_device_down (void); 996extern void btm_acl_update_busy_level (tBTM_BLI_EVENT event); 997extern void btm_acl_link_key_change (UINT16 handle, UINT8 status); 998 999extern void btm_cont_rswitch_or_chglinkkey (tACL_CONN *p, 1000 tBTM_SEC_DEV_REC *p_dev_rec, 1001 UINT8 hci_status); 1002 1003extern UINT8 btm_handle_to_acl_index (UINT16 hci_handle); 1004extern void btm_read_link_policy_complete (UINT8 *p); 1005extern void btm_read_rssi_complete (UINT8 *p); 1006extern void btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble); 1007extern void btm_read_link_quality_complete (UINT8 *p); 1008extern tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types); 1009extern void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset); 1010extern void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role); 1011extern void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 1012BTM_API extern UINT16 btm_get_acl_disc_reason_code (void); 1013BTM_API extern tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr, tBT_TRANSPORT transport); 1014extern void btm_read_remote_features_complete (UINT8 *p); 1015extern void btm_read_remote_ext_features_complete (UINT8 *p); 1016extern void btm_read_remote_ext_features_failed (UINT8 status, UINT16 handle); 1017extern void btm_read_remote_version_complete (UINT8 *p); 1018extern void btm_establish_continue (tACL_CONN *p_acl_cb); 1019 1020// btla-specific ++ 1021extern void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type); 1022// btla-specific -- 1023/* Read maximum data packet that can be sent over current connection */ 1024extern UINT16 btm_get_max_packet_size (BD_ADDR addr); 1025extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda, tBT_TRANSPORT transport); 1026extern BOOLEAN btm_acl_notif_conn_collision (BD_ADDR bda); 1027 1028#if BTM_PWR_MGR_INCLUDED == FALSE 1029extern void btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 1030 UINT16 interval); 1031 1032/* Internal functions provided by btm_pm.c 1033******************************************** 1034*/ 1035#else 1036extern void btm_pm_reset(void); 1037extern void btm_pm_sm_alloc(UINT8 ind); 1038extern void btm_pm_proc_cmd_status(UINT8 status); 1039extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 1040 UINT16 interval); 1041extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len); 1042#if BTM_SCO_INCLUDED == TRUE 1043extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle); 1044#else 1045#define btm_sco_chk_pend_unpark(hci_status, hci_handle) 1046#endif /* BTM_SCO_INCLUDED */ 1047#endif /* BTM_PWR_MGR_INCLUDED == FALSE */ 1048extern void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow); 1049 1050 1051/* Internal functions provided by btm_sco.c 1052******************************************** 1053*/ 1054extern void btm_sco_init (void); 1055extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle, 1056 tBTM_ESCO_DATA *p_esco_data); 1057extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval, 1058 UINT8 retrans_window, UINT16 rx_pkt_len, 1059 UINT16 tx_pkt_len); 1060extern void btm_sco_conn_req (BD_ADDR bda, DEV_CLASS dev_class, UINT8 link_type); 1061extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason); 1062extern void btm_sco_acl_removed (BD_ADDR bda); 1063extern void btm_route_sco_data (BT_HDR *p_msg); 1064extern BOOLEAN btm_is_sco_active (UINT16 handle); 1065extern void btm_remove_sco_links (BD_ADDR bda); 1066extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda); 1067 1068extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms); 1069extern UINT16 btm_find_scb_by_handle (UINT16 handle); 1070extern void btm_sco_flush_sco_data(UINT16 sco_inx); 1071 1072/* Internal functions provided by btm_devctl.c 1073********************************************** 1074*/ 1075extern void btm_dev_init (void); 1076extern void btm_dev_absent (void); 1077extern void btm_dev_timeout (TIMER_LIST_ENT *p_tle); 1078extern void btm_reset_complete (void); 1079extern void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len); 1080extern void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len); 1081extern void btm_read_local_supported_cmds_complete (UINT8 *p); 1082extern void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len); 1083extern void btm_read_local_ext_features_complete (UINT8 *p, UINT16 evt_len); 1084extern void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len); 1085extern void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len); 1086extern void btm_reset_ctrlr_complete (void); 1087extern void btm_write_simple_paring_mode_complete (UINT8 *p); 1088extern void btm_write_le_host_supported_complete (UINT8 *p); 1089 1090#if (BLE_INCLUDED == TRUE) 1091extern void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len); 1092extern void btm_read_ble_local_supported_features_complete (UINT8 *p, UINT16 evt_len); 1093extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len); 1094extern void btm_ble_add_2_white_list_complete(UINT8 status); 1095extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); 1096extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); 1097#endif /* BLE_INCLUDED */ 1098 1099/* Vendor Specific Command complete evt handler */ 1100extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len, 1101 tBTM_CMPL_CB *p_vsc_cplt_cback); 1102extern void btm_inq_db_reset (void); 1103extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len); 1104extern UINT8 btm_get_hci_version (void); 1105extern void btm_read_stored_link_key_complete (UINT8 *p); 1106extern void btm_write_stored_link_key_complete (UINT8 *p); 1107extern void btm_delete_stored_link_key_complete (UINT8 *p); 1108extern void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result); 1109extern void btm_report_device_status (tBTM_DEV_STATUS status); 1110 1111 1112/* Internal functions provided by btm_dev.c 1113********************************************** 1114*/ 1115extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1116extern UINT8 btm_get_voice_coding_support (void); 1117 1118extern tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr); 1119extern void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec); 1120extern tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr); 1121extern tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr); 1122extern tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle); 1123 1124/* Internal functions provided by btm_sec.c 1125********************************************** 1126*/ 1127extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1128extern tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, 1129 UINT16 handle, CONNECTION_TYPE conn_type, 1130 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1131extern tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, 1132 UINT32 mx_proto_id, UINT32 mx_chan_id, 1133 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1134extern void btm_sec_conn_req (UINT8 *bda, UINT8 *dc); 1135extern void btm_create_conn_cancel_complete (UINT8 *p); 1136extern void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout); 1137extern void btm_read_linq_tx_power_complete (UINT8 *p); 1138 1139extern void btm_sec_init (UINT8 sec_mode); 1140extern void btm_sec_dev_reset (void); 1141extern void btm_sec_abort_access_req (BD_ADDR bd_addr); 1142extern void btm_sec_auth_complete (UINT16 handle, UINT8 status); 1143extern void btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg); 1144extern void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 1145extern void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode); 1146extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason); 1147extern void btm_sec_disconnected (UINT16 handle, UINT8 reason); 1148extern void btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status); 1149extern void btm_sec_rmt_host_support_feat_evt (UINT8 *p); 1150extern void btm_io_capabilities_req (UINT8 *p); 1151extern void btm_io_capabilities_rsp (UINT8 *p); 1152extern void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p); 1153extern void btm_keypress_notif_evt (UINT8 *p); 1154extern void btm_simple_pair_complete (UINT8 *p); 1155extern void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type); 1156extern void btm_sec_link_key_request (UINT8 *p_bda); 1157extern void btm_sec_pin_code_request (UINT8 *p_bda); 1158extern void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset); 1159extern void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res, BOOLEAN is_le_trasnport); 1160 1161#if BLE_INCLUDED == TRUE 1162extern void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC *p_dev_rec); 1163extern BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC **p_rec); 1164extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda); 1165extern BOOLEAN btm_sec_is_le_capable_dev (BD_ADDR bda); 1166#endif /* BLE_INCLUDED */ 1167 1168extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda); 1169 1170#if BTM_OOB_INCLUDED == TRUE 1171extern void btm_rem_oob_req (UINT8 *p); 1172extern void btm_read_local_oob_complete (UINT8 *p); 1173#else 1174#define btm_rem_oob_req(p) 1175#define btm_read_local_oob_complete(p) 1176#endif 1177 1178extern void btm_acl_resubmit_page (void); 1179extern void btm_acl_reset_paging (void); 1180extern void btm_acl_paging (BT_HDR *p, BD_ADDR dest); 1181extern void btm_acl_set_discing (BOOLEAN discing); 1182extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm); 1183extern void btm_sec_clr_temp_auth_service (BD_ADDR bda); 1184 1185#ifdef __cplusplus 1186} 1187#endif 1188 1189#endif 1190 1191