1/* 2 * SSL3 Protocol 3 * 4 * This Source Code Form is subject to the terms of the Mozilla Public 5 * License, v. 2.0. If a copy of the MPL was not distributed with this 6 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ 7 8/* ECC code moved here from ssl3con.c */ 9 10#include "nss.h" 11#include "cert.h" 12#include "ssl.h" 13#include "cryptohi.h" /* for DSAU_ stuff */ 14#include "keyhi.h" 15#include "secder.h" 16#include "secitem.h" 17 18#include "sslimpl.h" 19#include "sslproto.h" 20#include "sslerr.h" 21#include "prtime.h" 22#include "prinrval.h" 23#include "prerror.h" 24#include "pratom.h" 25#include "prthread.h" 26#include "prinit.h" 27 28#include "pk11func.h" 29#include "secmod.h" 30 31#include <stdio.h> 32 33/* This is a bodge to allow this code to be compiled against older NSS headers 34 * that don't contain the TLS 1.2 changes. */ 35#ifndef CKM_NSS_TLS_MASTER_KEY_DERIVE_DH_SHA256 36#define CKM_NSS_TLS_MASTER_KEY_DERIVE_DH_SHA256 (CKM_NSS + 24) 37#endif 38 39#ifdef NSS_ENABLE_ECC 40 41#ifndef PK11_SETATTRS 42#define PK11_SETATTRS(x,id,v,l) (x)->type = (id); \ 43 (x)->pValue=(v); (x)->ulValueLen = (l); 44#endif 45 46#define SSL_GET_SERVER_PUBLIC_KEY(sock, type) \ 47 (ss->serverCerts[type].serverKeyPair ? \ 48 ss->serverCerts[type].serverKeyPair->pubKey : NULL) 49 50#define SSL_IS_CURVE_NEGOTIATED(curvemsk, curveName) \ 51 ((curveName > ec_noName) && \ 52 (curveName < ec_pastLastName) && \ 53 ((1UL << curveName) & curvemsk) != 0) 54 55 56 57static SECStatus ssl3_CreateECDHEphemeralKeys(sslSocket *ss, ECName ec_curve); 58 59#define supportedCurve(x) (((x) > ec_noName) && ((x) < ec_pastLastName)) 60 61/* Table containing OID tags for elliptic curves named in the 62 * ECC-TLS IETF draft. 63 */ 64static const SECOidTag ecName2OIDTag[] = { 65 0, 66 SEC_OID_SECG_EC_SECT163K1, /* 1 */ 67 SEC_OID_SECG_EC_SECT163R1, /* 2 */ 68 SEC_OID_SECG_EC_SECT163R2, /* 3 */ 69 SEC_OID_SECG_EC_SECT193R1, /* 4 */ 70 SEC_OID_SECG_EC_SECT193R2, /* 5 */ 71 SEC_OID_SECG_EC_SECT233K1, /* 6 */ 72 SEC_OID_SECG_EC_SECT233R1, /* 7 */ 73 SEC_OID_SECG_EC_SECT239K1, /* 8 */ 74 SEC_OID_SECG_EC_SECT283K1, /* 9 */ 75 SEC_OID_SECG_EC_SECT283R1, /* 10 */ 76 SEC_OID_SECG_EC_SECT409K1, /* 11 */ 77 SEC_OID_SECG_EC_SECT409R1, /* 12 */ 78 SEC_OID_SECG_EC_SECT571K1, /* 13 */ 79 SEC_OID_SECG_EC_SECT571R1, /* 14 */ 80 SEC_OID_SECG_EC_SECP160K1, /* 15 */ 81 SEC_OID_SECG_EC_SECP160R1, /* 16 */ 82 SEC_OID_SECG_EC_SECP160R2, /* 17 */ 83 SEC_OID_SECG_EC_SECP192K1, /* 18 */ 84 SEC_OID_SECG_EC_SECP192R1, /* 19 */ 85 SEC_OID_SECG_EC_SECP224K1, /* 20 */ 86 SEC_OID_SECG_EC_SECP224R1, /* 21 */ 87 SEC_OID_SECG_EC_SECP256K1, /* 22 */ 88 SEC_OID_SECG_EC_SECP256R1, /* 23 */ 89 SEC_OID_SECG_EC_SECP384R1, /* 24 */ 90 SEC_OID_SECG_EC_SECP521R1, /* 25 */ 91}; 92 93static const PRUint16 curve2bits[] = { 94 0, /* ec_noName = 0, */ 95 163, /* ec_sect163k1 = 1, */ 96 163, /* ec_sect163r1 = 2, */ 97 163, /* ec_sect163r2 = 3, */ 98 193, /* ec_sect193r1 = 4, */ 99 193, /* ec_sect193r2 = 5, */ 100 233, /* ec_sect233k1 = 6, */ 101 233, /* ec_sect233r1 = 7, */ 102 239, /* ec_sect239k1 = 8, */ 103 283, /* ec_sect283k1 = 9, */ 104 283, /* ec_sect283r1 = 10, */ 105 409, /* ec_sect409k1 = 11, */ 106 409, /* ec_sect409r1 = 12, */ 107 571, /* ec_sect571k1 = 13, */ 108 571, /* ec_sect571r1 = 14, */ 109 160, /* ec_secp160k1 = 15, */ 110 160, /* ec_secp160r1 = 16, */ 111 160, /* ec_secp160r2 = 17, */ 112 192, /* ec_secp192k1 = 18, */ 113 192, /* ec_secp192r1 = 19, */ 114 224, /* ec_secp224k1 = 20, */ 115 224, /* ec_secp224r1 = 21, */ 116 256, /* ec_secp256k1 = 22, */ 117 256, /* ec_secp256r1 = 23, */ 118 384, /* ec_secp384r1 = 24, */ 119 521, /* ec_secp521r1 = 25, */ 120 65535 /* ec_pastLastName */ 121}; 122 123typedef struct Bits2CurveStr { 124 PRUint16 bits; 125 ECName curve; 126} Bits2Curve; 127 128static const Bits2Curve bits2curve [] = { 129 { 192, ec_secp192r1 /* = 19, fast */ }, 130 { 160, ec_secp160r2 /* = 17, fast */ }, 131 { 160, ec_secp160k1 /* = 15, */ }, 132 { 160, ec_secp160r1 /* = 16, */ }, 133 { 163, ec_sect163k1 /* = 1, */ }, 134 { 163, ec_sect163r1 /* = 2, */ }, 135 { 163, ec_sect163r2 /* = 3, */ }, 136 { 192, ec_secp192k1 /* = 18, */ }, 137 { 193, ec_sect193r1 /* = 4, */ }, 138 { 193, ec_sect193r2 /* = 5, */ }, 139 { 224, ec_secp224r1 /* = 21, fast */ }, 140 { 224, ec_secp224k1 /* = 20, */ }, 141 { 233, ec_sect233k1 /* = 6, */ }, 142 { 233, ec_sect233r1 /* = 7, */ }, 143 { 239, ec_sect239k1 /* = 8, */ }, 144 { 256, ec_secp256r1 /* = 23, fast */ }, 145 { 256, ec_secp256k1 /* = 22, */ }, 146 { 283, ec_sect283k1 /* = 9, */ }, 147 { 283, ec_sect283r1 /* = 10, */ }, 148 { 384, ec_secp384r1 /* = 24, fast */ }, 149 { 409, ec_sect409k1 /* = 11, */ }, 150 { 409, ec_sect409r1 /* = 12, */ }, 151 { 521, ec_secp521r1 /* = 25, fast */ }, 152 { 571, ec_sect571k1 /* = 13, */ }, 153 { 571, ec_sect571r1 /* = 14, */ }, 154 { 65535, ec_noName } 155}; 156 157typedef struct ECDHEKeyPairStr { 158 ssl3KeyPair * pair; 159 int error; /* error code of the call-once function */ 160 PRCallOnceType once; 161} ECDHEKeyPair; 162 163/* arrays of ECDHE KeyPairs */ 164static ECDHEKeyPair gECDHEKeyPairs[ec_pastLastName]; 165 166SECStatus 167ssl3_ECName2Params(PLArenaPool * arena, ECName curve, SECKEYECParams * params) 168{ 169 SECOidData *oidData = NULL; 170 171 if ((curve <= ec_noName) || (curve >= ec_pastLastName) || 172 ((oidData = SECOID_FindOIDByTag(ecName2OIDTag[curve])) == NULL)) { 173 PORT_SetError(SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE); 174 return SECFailure; 175 } 176 177 SECITEM_AllocItem(arena, params, (2 + oidData->oid.len)); 178 /* 179 * params->data needs to contain the ASN encoding of an object ID (OID) 180 * representing the named curve. The actual OID is in 181 * oidData->oid.data so we simply prepend 0x06 and OID length 182 */ 183 params->data[0] = SEC_ASN1_OBJECT_ID; 184 params->data[1] = oidData->oid.len; 185 memcpy(params->data + 2, oidData->oid.data, oidData->oid.len); 186 187 return SECSuccess; 188} 189 190static ECName 191params2ecName(SECKEYECParams * params) 192{ 193 SECItem oid = { siBuffer, NULL, 0}; 194 SECOidData *oidData = NULL; 195 ECName i; 196 197 /* 198 * params->data needs to contain the ASN encoding of an object ID (OID) 199 * representing a named curve. Here, we strip away everything 200 * before the actual OID and use the OID to look up a named curve. 201 */ 202 if (params->data[0] != SEC_ASN1_OBJECT_ID) return ec_noName; 203 oid.len = params->len - 2; 204 oid.data = params->data + 2; 205 if ((oidData = SECOID_FindOID(&oid)) == NULL) return ec_noName; 206 for (i = ec_noName + 1; i < ec_pastLastName; i++) { 207 if (ecName2OIDTag[i] == oidData->offset) 208 return i; 209 } 210 211 return ec_noName; 212} 213 214/* Caller must set hiLevel error code. */ 215static SECStatus 216ssl3_ComputeECDHKeyHash(SECOidTag hashAlg, 217 SECItem ec_params, SECItem server_ecpoint, 218 SSL3Random *client_rand, SSL3Random *server_rand, 219 SSL3Hashes *hashes, PRBool bypassPKCS11) 220{ 221 PRUint8 * hashBuf; 222 PRUint8 * pBuf; 223 SECStatus rv = SECSuccess; 224 unsigned int bufLen; 225 /* 226 * XXX For now, we only support named curves (the appropriate 227 * checks are made before this method is called) so ec_params 228 * takes up only two bytes. ECPoint needs to fit in 256 bytes 229 * (because the spec says the length must fit in one byte) 230 */ 231 PRUint8 buf[2*SSL3_RANDOM_LENGTH + 2 + 1 + 256]; 232 233 bufLen = 2*SSL3_RANDOM_LENGTH + ec_params.len + 1 + server_ecpoint.len; 234 if (bufLen <= sizeof buf) { 235 hashBuf = buf; 236 } else { 237 hashBuf = PORT_Alloc(bufLen); 238 if (!hashBuf) { 239 return SECFailure; 240 } 241 } 242 243 memcpy(hashBuf, client_rand, SSL3_RANDOM_LENGTH); 244 pBuf = hashBuf + SSL3_RANDOM_LENGTH; 245 memcpy(pBuf, server_rand, SSL3_RANDOM_LENGTH); 246 pBuf += SSL3_RANDOM_LENGTH; 247 memcpy(pBuf, ec_params.data, ec_params.len); 248 pBuf += ec_params.len; 249 pBuf[0] = (PRUint8)(server_ecpoint.len); 250 pBuf += 1; 251 memcpy(pBuf, server_ecpoint.data, server_ecpoint.len); 252 pBuf += server_ecpoint.len; 253 PORT_Assert((unsigned int)(pBuf - hashBuf) == bufLen); 254 255 rv = ssl3_ComputeCommonKeyHash(hashAlg, hashBuf, bufLen, hashes, 256 bypassPKCS11); 257 258 PRINT_BUF(95, (NULL, "ECDHkey hash: ", hashBuf, bufLen)); 259 PRINT_BUF(95, (NULL, "ECDHkey hash: MD5 result", 260 hashes->u.s.md5, MD5_LENGTH)); 261 PRINT_BUF(95, (NULL, "ECDHkey hash: SHA1 result", 262 hashes->u.s.sha, SHA1_LENGTH)); 263 264 if (hashBuf != buf) 265 PORT_Free(hashBuf); 266 return rv; 267} 268 269 270/* Called from ssl3_SendClientKeyExchange(). */ 271SECStatus 272ssl3_SendECDHClientKeyExchange(sslSocket * ss, SECKEYPublicKey * svrPubKey) 273{ 274 PK11SymKey * pms = NULL; 275 SECStatus rv = SECFailure; 276 PRBool isTLS, isTLS12; 277 CK_MECHANISM_TYPE target; 278 SECKEYPublicKey *pubKey = NULL; /* Ephemeral ECDH key */ 279 SECKEYPrivateKey *privKey = NULL; /* Ephemeral ECDH key */ 280 281 PORT_Assert( ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss) ); 282 PORT_Assert( ss->opt.noLocks || ssl_HaveXmitBufLock(ss)); 283 284 isTLS = (PRBool)(ss->ssl3.pwSpec->version > SSL_LIBRARY_VERSION_3_0); 285 isTLS12 = (PRBool)(ss->ssl3.pwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_2); 286 287 /* Generate ephemeral EC keypair */ 288 if (svrPubKey->keyType != ecKey) { 289 PORT_SetError(SEC_ERROR_BAD_KEY); 290 goto loser; 291 } 292 /* XXX SHOULD CALL ssl3_CreateECDHEphemeralKeys here, instead! */ 293 privKey = SECKEY_CreateECPrivateKey(&svrPubKey->u.ec.DEREncodedParams, 294 &pubKey, ss->pkcs11PinArg); 295 if (!privKey || !pubKey) { 296 ssl_MapLowLevelError(SEC_ERROR_KEYGEN_FAIL); 297 rv = SECFailure; 298 goto loser; 299 } 300 PRINT_BUF(50, (ss, "ECDH public value:", 301 pubKey->u.ec.publicValue.data, 302 pubKey->u.ec.publicValue.len)); 303 304 if (isTLS12) { 305 target = CKM_NSS_TLS_MASTER_KEY_DERIVE_DH_SHA256; 306 } else if (isTLS) { 307 target = CKM_TLS_MASTER_KEY_DERIVE_DH; 308 } else { 309 target = CKM_SSL3_MASTER_KEY_DERIVE_DH; 310 } 311 312 /* Determine the PMS */ 313 pms = PK11_PubDeriveWithKDF(privKey, svrPubKey, PR_FALSE, NULL, NULL, 314 CKM_ECDH1_DERIVE, target, CKA_DERIVE, 0, 315 CKD_NULL, NULL, NULL); 316 317 if (pms == NULL) { 318 SSL3AlertDescription desc = illegal_parameter; 319 (void)SSL3_SendAlert(ss, alert_fatal, desc); 320 ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE); 321 goto loser; 322 } 323 324 SECKEY_DestroyPrivateKey(privKey); 325 privKey = NULL; 326 327 rv = ssl3_InitPendingCipherSpec(ss, pms); 328 PK11_FreeSymKey(pms); pms = NULL; 329 330 if (rv != SECSuccess) { 331 ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE); 332 goto loser; 333 } 334 335 rv = ssl3_AppendHandshakeHeader(ss, client_key_exchange, 336 pubKey->u.ec.publicValue.len + 1); 337 if (rv != SECSuccess) { 338 goto loser; /* err set by ssl3_AppendHandshake* */ 339 } 340 341 rv = ssl3_AppendHandshakeVariable(ss, 342 pubKey->u.ec.publicValue.data, 343 pubKey->u.ec.publicValue.len, 1); 344 SECKEY_DestroyPublicKey(pubKey); 345 pubKey = NULL; 346 347 if (rv != SECSuccess) { 348 goto loser; /* err set by ssl3_AppendHandshake* */ 349 } 350 351 rv = SECSuccess; 352 353loser: 354 if(pms) PK11_FreeSymKey(pms); 355 if(privKey) SECKEY_DestroyPrivateKey(privKey); 356 if(pubKey) SECKEY_DestroyPublicKey(pubKey); 357 return rv; 358} 359 360 361/* 362** Called from ssl3_HandleClientKeyExchange() 363*/ 364SECStatus 365ssl3_HandleECDHClientKeyExchange(sslSocket *ss, SSL3Opaque *b, 366 PRUint32 length, 367 SECKEYPublicKey *srvrPubKey, 368 SECKEYPrivateKey *srvrPrivKey) 369{ 370 PK11SymKey * pms; 371 SECStatus rv; 372 SECKEYPublicKey clntPubKey; 373 CK_MECHANISM_TYPE target; 374 PRBool isTLS, isTLS12; 375 376 PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) ); 377 PORT_Assert( ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss) ); 378 379 clntPubKey.keyType = ecKey; 380 clntPubKey.u.ec.DEREncodedParams.len = 381 srvrPubKey->u.ec.DEREncodedParams.len; 382 clntPubKey.u.ec.DEREncodedParams.data = 383 srvrPubKey->u.ec.DEREncodedParams.data; 384 385 rv = ssl3_ConsumeHandshakeVariable(ss, &clntPubKey.u.ec.publicValue, 386 1, &b, &length); 387 if (rv != SECSuccess) { 388 SEND_ALERT 389 return SECFailure; /* XXX Who sets the error code?? */ 390 } 391 392 isTLS = (PRBool)(ss->ssl3.prSpec->version > SSL_LIBRARY_VERSION_3_0); 393 isTLS12 = (PRBool)(ss->ssl3.prSpec->version >= SSL_LIBRARY_VERSION_TLS_1_2); 394 395 if (isTLS12) { 396 target = CKM_NSS_TLS_MASTER_KEY_DERIVE_DH_SHA256; 397 } else if (isTLS) { 398 target = CKM_TLS_MASTER_KEY_DERIVE_DH; 399 } else { 400 target = CKM_SSL3_MASTER_KEY_DERIVE_DH; 401 } 402 403 /* Determine the PMS */ 404 pms = PK11_PubDeriveWithKDF(srvrPrivKey, &clntPubKey, PR_FALSE, NULL, NULL, 405 CKM_ECDH1_DERIVE, target, CKA_DERIVE, 0, 406 CKD_NULL, NULL, NULL); 407 408 if (pms == NULL) { 409 /* last gasp. */ 410 ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE); 411 return SECFailure; 412 } 413 414 rv = ssl3_InitPendingCipherSpec(ss, pms); 415 PK11_FreeSymKey(pms); 416 if (rv != SECSuccess) { 417 SEND_ALERT 418 return SECFailure; /* error code set by ssl3_InitPendingCipherSpec */ 419 } 420 return SECSuccess; 421} 422 423ECName 424ssl3_GetCurveWithECKeyStrength(PRUint32 curvemsk, int requiredECCbits) 425{ 426 int i; 427 428 for ( i = 0; bits2curve[i].curve != ec_noName; i++) { 429 if (bits2curve[i].bits < requiredECCbits) 430 continue; 431 if (SSL_IS_CURVE_NEGOTIATED(curvemsk, bits2curve[i].curve)) { 432 return bits2curve[i].curve; 433 } 434 } 435 PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP); 436 return ec_noName; 437} 438 439/* find the "weakest link". Get strength of signature key and of sym key. 440 * choose curve for the weakest of those two. 441 */ 442ECName 443ssl3_GetCurveNameForServerSocket(sslSocket *ss) 444{ 445 SECKEYPublicKey * svrPublicKey = NULL; 446 ECName ec_curve = ec_noName; 447 int signatureKeyStrength = 521; 448 int requiredECCbits = ss->sec.secretKeyBits * 2; 449 450 if (ss->ssl3.hs.kea_def->kea == kea_ecdhe_ecdsa) { 451 svrPublicKey = SSL_GET_SERVER_PUBLIC_KEY(ss, kt_ecdh); 452 if (svrPublicKey) 453 ec_curve = params2ecName(&svrPublicKey->u.ec.DEREncodedParams); 454 if (!SSL_IS_CURVE_NEGOTIATED(ss->ssl3.hs.negotiatedECCurves, ec_curve)) { 455 PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP); 456 return ec_noName; 457 } 458 signatureKeyStrength = curve2bits[ ec_curve ]; 459 } else { 460 /* RSA is our signing cert */ 461 int serverKeyStrengthInBits; 462 463 svrPublicKey = SSL_GET_SERVER_PUBLIC_KEY(ss, kt_rsa); 464 if (!svrPublicKey) { 465 PORT_SetError(SSL_ERROR_NO_CYPHER_OVERLAP); 466 return ec_noName; 467 } 468 469 /* currently strength in bytes */ 470 serverKeyStrengthInBits = svrPublicKey->u.rsa.modulus.len; 471 if (svrPublicKey->u.rsa.modulus.data[0] == 0) { 472 serverKeyStrengthInBits--; 473 } 474 /* convert to strength in bits */ 475 serverKeyStrengthInBits *= BPB; 476 477 signatureKeyStrength = 478 SSL_RSASTRENGTH_TO_ECSTRENGTH(serverKeyStrengthInBits); 479 } 480 if ( requiredECCbits > signatureKeyStrength ) 481 requiredECCbits = signatureKeyStrength; 482 483 return ssl3_GetCurveWithECKeyStrength(ss->ssl3.hs.negotiatedECCurves, 484 requiredECCbits); 485} 486 487/* function to clear out the lists */ 488static SECStatus 489ssl3_ShutdownECDHECurves(void *appData, void *nssData) 490{ 491 int i; 492 ECDHEKeyPair *keyPair = &gECDHEKeyPairs[0]; 493 494 for (i=0; i < ec_pastLastName; i++, keyPair++) { 495 if (keyPair->pair) { 496 ssl3_FreeKeyPair(keyPair->pair); 497 } 498 } 499 memset(gECDHEKeyPairs, 0, sizeof gECDHEKeyPairs); 500 return SECSuccess; 501} 502 503static PRStatus 504ssl3_ECRegister(void) 505{ 506 SECStatus rv; 507 rv = NSS_RegisterShutdown(ssl3_ShutdownECDHECurves, gECDHEKeyPairs); 508 if (rv != SECSuccess) { 509 gECDHEKeyPairs[ec_noName].error = PORT_GetError(); 510 } 511 return (PRStatus)rv; 512} 513 514/* CallOnce function, called once for each named curve. */ 515static PRStatus 516ssl3_CreateECDHEphemeralKeyPair(void * arg) 517{ 518 SECKEYPrivateKey * privKey = NULL; 519 SECKEYPublicKey * pubKey = NULL; 520 ssl3KeyPair * keyPair = NULL; 521 ECName ec_curve = (ECName)arg; 522 SECKEYECParams ecParams = { siBuffer, NULL, 0 }; 523 524 PORT_Assert(gECDHEKeyPairs[ec_curve].pair == NULL); 525 526 /* ok, no one has generated a global key for this curve yet, do so */ 527 if (ssl3_ECName2Params(NULL, ec_curve, &ecParams) != SECSuccess) { 528 gECDHEKeyPairs[ec_curve].error = PORT_GetError(); 529 return PR_FAILURE; 530 } 531 532 privKey = SECKEY_CreateECPrivateKey(&ecParams, &pubKey, NULL); 533 SECITEM_FreeItem(&ecParams, PR_FALSE); 534 535 if (!privKey || !pubKey || !(keyPair = ssl3_NewKeyPair(privKey, pubKey))) { 536 if (privKey) { 537 SECKEY_DestroyPrivateKey(privKey); 538 } 539 if (pubKey) { 540 SECKEY_DestroyPublicKey(pubKey); 541 } 542 ssl_MapLowLevelError(SEC_ERROR_KEYGEN_FAIL); 543 gECDHEKeyPairs[ec_curve].error = PORT_GetError(); 544 return PR_FAILURE; 545 } 546 547 gECDHEKeyPairs[ec_curve].pair = keyPair; 548 return PR_SUCCESS; 549} 550 551/* 552 * Creates the ephemeral public and private ECDH keys used by 553 * server in ECDHE_RSA and ECDHE_ECDSA handshakes. 554 * For now, the elliptic curve is chosen to be the same 555 * strength as the signing certificate (ECC or RSA). 556 * We need an API to specify the curve. This won't be a real 557 * issue until we further develop server-side support for ECC 558 * cipher suites. 559 */ 560static SECStatus 561ssl3_CreateECDHEphemeralKeys(sslSocket *ss, ECName ec_curve) 562{ 563 ssl3KeyPair * keyPair = NULL; 564 565 /* if there's no global key for this curve, make one. */ 566 if (gECDHEKeyPairs[ec_curve].pair == NULL) { 567 PRStatus status; 568 569 status = PR_CallOnce(&gECDHEKeyPairs[ec_noName].once, ssl3_ECRegister); 570 if (status != PR_SUCCESS) { 571 PORT_SetError(gECDHEKeyPairs[ec_noName].error); 572 return SECFailure; 573 } 574 status = PR_CallOnceWithArg(&gECDHEKeyPairs[ec_curve].once, 575 ssl3_CreateECDHEphemeralKeyPair, 576 (void *)ec_curve); 577 if (status != PR_SUCCESS) { 578 PORT_SetError(gECDHEKeyPairs[ec_curve].error); 579 return SECFailure; 580 } 581 } 582 583 keyPair = gECDHEKeyPairs[ec_curve].pair; 584 PORT_Assert(keyPair != NULL); 585 if (!keyPair) 586 return SECFailure; 587 ss->ephemeralECDHKeyPair = ssl3_GetKeyPairRef(keyPair); 588 589 return SECSuccess; 590} 591 592SECStatus 593ssl3_HandleECDHServerKeyExchange(sslSocket *ss, SSL3Opaque *b, PRUint32 length) 594{ 595 PLArenaPool * arena = NULL; 596 SECKEYPublicKey *peerKey = NULL; 597 PRBool isTLS, isTLS12; 598 SECStatus rv; 599 int errCode = SSL_ERROR_RX_MALFORMED_SERVER_KEY_EXCH; 600 SSL3AlertDescription desc = illegal_parameter; 601 SSL3Hashes hashes; 602 SECItem signature = {siBuffer, NULL, 0}; 603 604 SECItem ec_params = {siBuffer, NULL, 0}; 605 SECItem ec_point = {siBuffer, NULL, 0}; 606 unsigned char paramBuf[3]; /* only for curve_type == named_curve */ 607 SSL3SignatureAndHashAlgorithm sigAndHash; 608 609 sigAndHash.hashAlg = SEC_OID_UNKNOWN; 610 611 isTLS = (PRBool)(ss->ssl3.prSpec->version > SSL_LIBRARY_VERSION_3_0); 612 isTLS12 = (PRBool)(ss->ssl3.prSpec->version >= SSL_LIBRARY_VERSION_TLS_1_2); 613 614 /* XXX This works only for named curves, revisit this when 615 * we support generic curves. 616 */ 617 ec_params.len = sizeof paramBuf; 618 ec_params.data = paramBuf; 619 rv = ssl3_ConsumeHandshake(ss, ec_params.data, ec_params.len, &b, &length); 620 if (rv != SECSuccess) { 621 goto loser; /* malformed. */ 622 } 623 624 /* Fail if the curve is not a named curve */ 625 if ((ec_params.data[0] != ec_type_named) || 626 (ec_params.data[1] != 0) || 627 !supportedCurve(ec_params.data[2])) { 628 errCode = SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE; 629 desc = handshake_failure; 630 goto alert_loser; 631 } 632 633 rv = ssl3_ConsumeHandshakeVariable(ss, &ec_point, 1, &b, &length); 634 if (rv != SECSuccess) { 635 goto loser; /* malformed. */ 636 } 637 /* Fail if the ec point uses compressed representation */ 638 if (ec_point.data[0] != EC_POINT_FORM_UNCOMPRESSED) { 639 errCode = SEC_ERROR_UNSUPPORTED_EC_POINT_FORM; 640 desc = handshake_failure; 641 goto alert_loser; 642 } 643 644 if (isTLS12) { 645 rv = ssl3_ConsumeSignatureAndHashAlgorithm(ss, &b, &length, 646 &sigAndHash); 647 if (rv != SECSuccess) { 648 goto loser; /* malformed or unsupported. */ 649 } 650 rv = ssl3_CheckSignatureAndHashAlgorithmConsistency( 651 &sigAndHash, ss->sec.peerCert); 652 if (rv != SECSuccess) { 653 goto loser; 654 } 655 } 656 657 rv = ssl3_ConsumeHandshakeVariable(ss, &signature, 2, &b, &length); 658 if (rv != SECSuccess) { 659 goto loser; /* malformed. */ 660 } 661 662 if (length != 0) { 663 if (isTLS) 664 desc = decode_error; 665 goto alert_loser; /* malformed. */ 666 } 667 668 PRINT_BUF(60, (NULL, "Server EC params", ec_params.data, 669 ec_params.len)); 670 PRINT_BUF(60, (NULL, "Server EC point", ec_point.data, ec_point.len)); 671 672 /* failures after this point are not malformed handshakes. */ 673 /* TLS: send decrypt_error if signature failed. */ 674 desc = isTLS ? decrypt_error : handshake_failure; 675 676 /* 677 * check to make sure the hash is signed by right guy 678 */ 679 rv = ssl3_ComputeECDHKeyHash(sigAndHash.hashAlg, ec_params, ec_point, 680 &ss->ssl3.hs.client_random, 681 &ss->ssl3.hs.server_random, 682 &hashes, ss->opt.bypassPKCS11); 683 684 if (rv != SECSuccess) { 685 errCode = 686 ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 687 goto alert_loser; 688 } 689 rv = ssl3_VerifySignedHashes(&hashes, ss->sec.peerCert, &signature, 690 isTLS, ss->pkcs11PinArg); 691 if (rv != SECSuccess) { 692 errCode = 693 ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 694 goto alert_loser; 695 } 696 697 arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE); 698 if (arena == NULL) { 699 goto no_memory; 700 } 701 702 ss->sec.peerKey = peerKey = PORT_ArenaZNew(arena, SECKEYPublicKey); 703 if (peerKey == NULL) { 704 goto no_memory; 705 } 706 707 peerKey->arena = arena; 708 peerKey->keyType = ecKey; 709 710 /* set up EC parameters in peerKey */ 711 if (ssl3_ECName2Params(arena, ec_params.data[2], 712 &peerKey->u.ec.DEREncodedParams) != SECSuccess) { 713 /* we should never get here since we already 714 * checked that we are dealing with a supported curve 715 */ 716 errCode = SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE; 717 goto alert_loser; 718 } 719 720 /* copy publicValue in peerKey */ 721 if (SECITEM_CopyItem(arena, &peerKey->u.ec.publicValue, &ec_point)) 722 { 723 PORT_FreeArena(arena, PR_FALSE); 724 goto no_memory; 725 } 726 peerKey->pkcs11Slot = NULL; 727 peerKey->pkcs11ID = CK_INVALID_HANDLE; 728 729 ss->sec.peerKey = peerKey; 730 ss->ssl3.hs.ws = wait_cert_request; 731 732 return SECSuccess; 733 734alert_loser: 735 (void)SSL3_SendAlert(ss, alert_fatal, desc); 736loser: 737 PORT_SetError( errCode ); 738 return SECFailure; 739 740no_memory: /* no-memory error has already been set. */ 741 ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 742 return SECFailure; 743} 744 745SECStatus 746ssl3_SendECDHServerKeyExchange( 747 sslSocket *ss, 748 const SSL3SignatureAndHashAlgorithm *sigAndHash) 749{ 750 const ssl3KEADef * kea_def = ss->ssl3.hs.kea_def; 751 SECStatus rv = SECFailure; 752 int length; 753 PRBool isTLS, isTLS12; 754 SECItem signed_hash = {siBuffer, NULL, 0}; 755 SSL3Hashes hashes; 756 757 SECKEYPublicKey * ecdhePub; 758 SECItem ec_params = {siBuffer, NULL, 0}; 759 unsigned char paramBuf[3]; 760 ECName curve; 761 SSL3KEAType certIndex; 762 763 /* Generate ephemeral ECDH key pair and send the public key */ 764 curve = ssl3_GetCurveNameForServerSocket(ss); 765 if (curve == ec_noName) { 766 goto loser; 767 } 768 rv = ssl3_CreateECDHEphemeralKeys(ss, curve); 769 if (rv != SECSuccess) { 770 goto loser; /* err set by AppendHandshake. */ 771 } 772 ecdhePub = ss->ephemeralECDHKeyPair->pubKey; 773 PORT_Assert(ecdhePub != NULL); 774 if (!ecdhePub) { 775 PORT_SetError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 776 return SECFailure; 777 } 778 779 ec_params.len = sizeof paramBuf; 780 ec_params.data = paramBuf; 781 curve = params2ecName(&ecdhePub->u.ec.DEREncodedParams); 782 if (curve != ec_noName) { 783 ec_params.data[0] = ec_type_named; 784 ec_params.data[1] = 0x00; 785 ec_params.data[2] = curve; 786 } else { 787 PORT_SetError(SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE); 788 goto loser; 789 } 790 791 rv = ssl3_ComputeECDHKeyHash(sigAndHash->hashAlg, 792 ec_params, 793 ecdhePub->u.ec.publicValue, 794 &ss->ssl3.hs.client_random, 795 &ss->ssl3.hs.server_random, 796 &hashes, ss->opt.bypassPKCS11); 797 if (rv != SECSuccess) { 798 ssl_MapLowLevelError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 799 goto loser; 800 } 801 802 isTLS = (PRBool)(ss->ssl3.pwSpec->version > SSL_LIBRARY_VERSION_3_0); 803 isTLS12 = (PRBool)(ss->ssl3.pwSpec->version >= SSL_LIBRARY_VERSION_TLS_1_2); 804 805 /* XXX SSLKEAType isn't really a good choice for 806 * indexing certificates but that's all we have 807 * for now. 808 */ 809 if (kea_def->kea == kea_ecdhe_rsa) 810 certIndex = kt_rsa; 811 else /* kea_def->kea == kea_ecdhe_ecdsa */ 812 certIndex = kt_ecdh; 813 814 rv = ssl3_SignHashes(&hashes, ss->serverCerts[certIndex].SERVERKEY, 815 &signed_hash, isTLS); 816 if (rv != SECSuccess) { 817 goto loser; /* ssl3_SignHashes has set err. */ 818 } 819 if (signed_hash.data == NULL) { 820 /* how can this happen and rv == SECSuccess ?? */ 821 PORT_SetError(SSL_ERROR_SERVER_KEY_EXCHANGE_FAILURE); 822 goto loser; 823 } 824 825 length = ec_params.len + 826 1 + ecdhePub->u.ec.publicValue.len + 827 (isTLS12 ? 2 : 0) + 2 + signed_hash.len; 828 829 rv = ssl3_AppendHandshakeHeader(ss, server_key_exchange, length); 830 if (rv != SECSuccess) { 831 goto loser; /* err set by AppendHandshake. */ 832 } 833 834 rv = ssl3_AppendHandshake(ss, ec_params.data, ec_params.len); 835 if (rv != SECSuccess) { 836 goto loser; /* err set by AppendHandshake. */ 837 } 838 839 rv = ssl3_AppendHandshakeVariable(ss, ecdhePub->u.ec.publicValue.data, 840 ecdhePub->u.ec.publicValue.len, 1); 841 if (rv != SECSuccess) { 842 goto loser; /* err set by AppendHandshake. */ 843 } 844 845 if (isTLS12) { 846 rv = ssl3_AppendSignatureAndHashAlgorithm(ss, sigAndHash); 847 if (rv != SECSuccess) { 848 goto loser; /* err set by AppendHandshake. */ 849 } 850 } 851 852 rv = ssl3_AppendHandshakeVariable(ss, signed_hash.data, 853 signed_hash.len, 2); 854 if (rv != SECSuccess) { 855 goto loser; /* err set by AppendHandshake. */ 856 } 857 858 PORT_Free(signed_hash.data); 859 return SECSuccess; 860 861loser: 862 if (signed_hash.data != NULL) 863 PORT_Free(signed_hash.data); 864 return SECFailure; 865} 866 867/* Lists of ECC cipher suites for searching and disabling. */ 868 869static const ssl3CipherSuite ecdh_suites[] = { 870 TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, 871 TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, 872 TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, 873 TLS_ECDH_ECDSA_WITH_NULL_SHA, 874 TLS_ECDH_ECDSA_WITH_RC4_128_SHA, 875 TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, 876 TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, 877 TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, 878 TLS_ECDH_RSA_WITH_NULL_SHA, 879 TLS_ECDH_RSA_WITH_RC4_128_SHA, 880 0 /* end of list marker */ 881}; 882 883static const ssl3CipherSuite ecdh_ecdsa_suites[] = { 884 TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, 885 TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, 886 TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, 887 TLS_ECDH_ECDSA_WITH_NULL_SHA, 888 TLS_ECDH_ECDSA_WITH_RC4_128_SHA, 889 0 /* end of list marker */ 890}; 891 892static const ssl3CipherSuite ecdh_rsa_suites[] = { 893 TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, 894 TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, 895 TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, 896 TLS_ECDH_RSA_WITH_NULL_SHA, 897 TLS_ECDH_RSA_WITH_RC4_128_SHA, 898 0 /* end of list marker */ 899}; 900 901static const ssl3CipherSuite ecdhe_ecdsa_suites[] = { 902 TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, 903 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, 904 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, 905 TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, 906 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, 907 TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305, 908 TLS_ECDHE_ECDSA_WITH_NULL_SHA, 909 TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, 910 0 /* end of list marker */ 911}; 912 913static const ssl3CipherSuite ecdhe_rsa_suites[] = { 914 TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, 915 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, 916 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, 917 TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, 918 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, 919 TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305, 920 TLS_ECDHE_RSA_WITH_NULL_SHA, 921 TLS_ECDHE_RSA_WITH_RC4_128_SHA, 922 0 /* end of list marker */ 923}; 924 925/* List of all ECC cipher suites */ 926static const ssl3CipherSuite ecSuites[] = { 927 TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, 928 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, 929 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, 930 TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, 931 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, 932 TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305, 933 TLS_ECDHE_ECDSA_WITH_NULL_SHA, 934 TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, 935 TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, 936 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, 937 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, 938 TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, 939 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, 940 TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305, 941 TLS_ECDHE_RSA_WITH_NULL_SHA, 942 TLS_ECDHE_RSA_WITH_RC4_128_SHA, 943 TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, 944 TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, 945 TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, 946 TLS_ECDH_ECDSA_WITH_NULL_SHA, 947 TLS_ECDH_ECDSA_WITH_RC4_128_SHA, 948 TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, 949 TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, 950 TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, 951 TLS_ECDH_RSA_WITH_NULL_SHA, 952 TLS_ECDH_RSA_WITH_RC4_128_SHA, 953 0 /* end of list marker */ 954}; 955 956/* On this socket, Disable the ECC cipher suites in the argument's list */ 957SECStatus 958ssl3_DisableECCSuites(sslSocket * ss, const ssl3CipherSuite * suite) 959{ 960 if (!suite) 961 suite = ecSuites; 962 for (; *suite; ++suite) { 963 SECStatus rv = ssl3_CipherPrefSet(ss, *suite, PR_FALSE); 964 965 PORT_Assert(rv == SECSuccess); /* else is coding error */ 966 } 967 return SECSuccess; 968} 969 970/* Look at the server certs configured on this socket, and disable any 971 * ECC cipher suites that are not supported by those certs. 972 */ 973void 974ssl3_FilterECCipherSuitesByServerCerts(sslSocket * ss) 975{ 976 CERTCertificate * svrCert; 977 978 svrCert = ss->serverCerts[kt_rsa].serverCert; 979 if (!svrCert) { 980 ssl3_DisableECCSuites(ss, ecdhe_rsa_suites); 981 } 982 983 svrCert = ss->serverCerts[kt_ecdh].serverCert; 984 if (!svrCert) { 985 ssl3_DisableECCSuites(ss, ecdh_suites); 986 ssl3_DisableECCSuites(ss, ecdhe_ecdsa_suites); 987 } else { 988 SECOidTag sigTag = SECOID_GetAlgorithmTag(&svrCert->signature); 989 990 switch (sigTag) { 991 case SEC_OID_PKCS1_RSA_ENCRYPTION: 992 case SEC_OID_PKCS1_MD2_WITH_RSA_ENCRYPTION: 993 case SEC_OID_PKCS1_MD4_WITH_RSA_ENCRYPTION: 994 case SEC_OID_PKCS1_MD5_WITH_RSA_ENCRYPTION: 995 case SEC_OID_PKCS1_SHA1_WITH_RSA_ENCRYPTION: 996 case SEC_OID_PKCS1_SHA224_WITH_RSA_ENCRYPTION: 997 case SEC_OID_PKCS1_SHA256_WITH_RSA_ENCRYPTION: 998 case SEC_OID_PKCS1_SHA384_WITH_RSA_ENCRYPTION: 999 case SEC_OID_PKCS1_SHA512_WITH_RSA_ENCRYPTION: 1000 ssl3_DisableECCSuites(ss, ecdh_ecdsa_suites); 1001 break; 1002 case SEC_OID_ANSIX962_ECDSA_SHA1_SIGNATURE: 1003 case SEC_OID_ANSIX962_ECDSA_SHA224_SIGNATURE: 1004 case SEC_OID_ANSIX962_ECDSA_SHA256_SIGNATURE: 1005 case SEC_OID_ANSIX962_ECDSA_SHA384_SIGNATURE: 1006 case SEC_OID_ANSIX962_ECDSA_SHA512_SIGNATURE: 1007 case SEC_OID_ANSIX962_ECDSA_SIGNATURE_RECOMMENDED_DIGEST: 1008 case SEC_OID_ANSIX962_ECDSA_SIGNATURE_SPECIFIED_DIGEST: 1009 ssl3_DisableECCSuites(ss, ecdh_rsa_suites); 1010 break; 1011 default: 1012 ssl3_DisableECCSuites(ss, ecdh_suites); 1013 break; 1014 } 1015 } 1016} 1017 1018/* Ask: is ANY ECC cipher suite enabled on this socket? */ 1019/* Order(N^2). Yuk. Also, this ignores export policy. */ 1020PRBool 1021ssl3_IsECCEnabled(sslSocket * ss) 1022{ 1023 const ssl3CipherSuite * suite; 1024 PK11SlotInfo *slot; 1025 1026 /* make sure we can do ECC */ 1027 slot = PK11_GetBestSlot(CKM_ECDH1_DERIVE, ss->pkcs11PinArg); 1028 if (!slot) { 1029 return PR_FALSE; 1030 } 1031 PK11_FreeSlot(slot); 1032 1033 /* make sure an ECC cipher is enabled */ 1034 for (suite = ecSuites; *suite; ++suite) { 1035 PRBool enabled = PR_FALSE; 1036 SECStatus rv = ssl3_CipherPrefGet(ss, *suite, &enabled); 1037 1038 PORT_Assert(rv == SECSuccess); /* else is coding error */ 1039 if (rv == SECSuccess && enabled) 1040 return PR_TRUE; 1041 } 1042 return PR_FALSE; 1043} 1044 1045#define BE(n) 0, n 1046 1047/* Prefabricated TLS client hello extension, Elliptic Curves List, 1048 * offers only 3 curves, the Suite B curves, 23-25 1049 */ 1050static const PRUint8 suiteBECList[12] = { 1051 BE(10), /* Extension type */ 1052 BE( 8), /* octets that follow ( 3 pairs + 1 length pair) */ 1053 BE( 6), /* octets that follow ( 3 pairs) */ 1054 BE(23), BE(24), BE(25) 1055}; 1056 1057/* Prefabricated TLS client hello extension, Elliptic Curves List, 1058 * offers curves 1-25. 1059 */ 1060static const PRUint8 tlsECList[56] = { 1061 BE(10), /* Extension type */ 1062 BE(52), /* octets that follow (25 pairs + 1 length pair) */ 1063 BE(50), /* octets that follow (25 pairs) */ 1064 BE( 1), BE( 2), BE( 3), BE( 4), BE( 5), BE( 6), BE( 7), 1065 BE( 8), BE( 9), BE(10), BE(11), BE(12), BE(13), BE(14), BE(15), 1066 BE(16), BE(17), BE(18), BE(19), BE(20), BE(21), BE(22), BE(23), 1067 BE(24), BE(25) 1068}; 1069 1070static const PRUint8 ecPtFmt[6] = { 1071 BE(11), /* Extension type */ 1072 BE( 2), /* octets that follow */ 1073 1, /* octets that follow */ 1074 0 /* uncompressed type only */ 1075}; 1076 1077/* This function already presumes we can do ECC, ssl3_IsECCEnabled must be 1078 * called before this function. It looks to see if we have a token which 1079 * is capable of doing smaller than SuiteB curves. If the token can, we 1080 * presume the token can do the whole SSL suite of curves. If it can't we 1081 * presume the token that allowed ECC to be enabled can only do suite B 1082 * curves. */ 1083static PRBool 1084ssl3_SuiteBOnly(sslSocket *ss) 1085{ 1086#if 0 1087 /* See if we can support small curves (like 163). If not, assume we can 1088 * only support Suite-B curves (P-256, P-384, P-521). */ 1089 PK11SlotInfo *slot = 1090 PK11_GetBestSlotWithAttributes(CKM_ECDH1_DERIVE, 0, 163, 1091 ss ? ss->pkcs11PinArg : NULL); 1092 1093 if (!slot) { 1094 /* nope, presume we can only do suite B */ 1095 return PR_TRUE; 1096 } 1097 /* we can, presume we can do all curves */ 1098 PK11_FreeSlot(slot); 1099 return PR_FALSE; 1100#else 1101 return PR_TRUE; 1102#endif 1103} 1104 1105/* Send our "canned" (precompiled) Supported Elliptic Curves extension, 1106 * which says that we support all TLS-defined named curves. 1107 */ 1108PRInt32 1109ssl3_SendSupportedCurvesXtn( 1110 sslSocket * ss, 1111 PRBool append, 1112 PRUint32 maxBytes) 1113{ 1114 PRInt32 ecListSize = 0; 1115 const PRUint8 *ecList = NULL; 1116 1117 if (!ss || !ssl3_IsECCEnabled(ss)) 1118 return 0; 1119 1120 if (ssl3_SuiteBOnly(ss)) { 1121 ecListSize = sizeof suiteBECList; 1122 ecList = suiteBECList; 1123 } else { 1124 ecListSize = sizeof tlsECList; 1125 ecList = tlsECList; 1126 } 1127 1128 if (append && maxBytes >= ecListSize) { 1129 SECStatus rv = ssl3_AppendHandshake(ss, ecList, ecListSize); 1130 if (rv != SECSuccess) 1131 return -1; 1132 if (!ss->sec.isServer) { 1133 TLSExtensionData *xtnData = &ss->xtnData; 1134 xtnData->advertised[xtnData->numAdvertised++] = 1135 ssl_elliptic_curves_xtn; 1136 } 1137 } 1138 return ecListSize; 1139} 1140 1141PRUint32 1142ssl3_GetSupportedECCurveMask(sslSocket *ss) 1143{ 1144 if (ssl3_SuiteBOnly(ss)) { 1145 return SSL3_SUITE_B_SUPPORTED_CURVES_MASK; 1146 } 1147 return SSL3_ALL_SUPPORTED_CURVES_MASK; 1148} 1149 1150/* Send our "canned" (precompiled) Supported Point Formats extension, 1151 * which says that we only support uncompressed points. 1152 */ 1153PRInt32 1154ssl3_SendSupportedPointFormatsXtn( 1155 sslSocket * ss, 1156 PRBool append, 1157 PRUint32 maxBytes) 1158{ 1159 if (!ss || !ssl3_IsECCEnabled(ss)) 1160 return 0; 1161 if (append && maxBytes >= (sizeof ecPtFmt)) { 1162 SECStatus rv = ssl3_AppendHandshake(ss, ecPtFmt, (sizeof ecPtFmt)); 1163 if (rv != SECSuccess) 1164 return -1; 1165 if (!ss->sec.isServer) { 1166 TLSExtensionData *xtnData = &ss->xtnData; 1167 xtnData->advertised[xtnData->numAdvertised++] = 1168 ssl_ec_point_formats_xtn; 1169 } 1170 } 1171 return (sizeof ecPtFmt); 1172} 1173 1174/* Just make sure that the remote client supports uncompressed points, 1175 * Since that is all we support. Disable ECC cipher suites if it doesn't. 1176 */ 1177SECStatus 1178ssl3_HandleSupportedPointFormatsXtn(sslSocket *ss, PRUint16 ex_type, 1179 SECItem *data) 1180{ 1181 int i; 1182 1183 if (data->len < 2 || data->len > 255 || !data->data || 1184 data->len != (unsigned int)data->data[0] + 1) { 1185 /* malformed */ 1186 goto loser; 1187 } 1188 for (i = data->len; --i > 0; ) { 1189 if (data->data[i] == 0) { 1190 /* indicate that we should send a reply */ 1191 SECStatus rv; 1192 rv = ssl3_RegisterServerHelloExtensionSender(ss, ex_type, 1193 &ssl3_SendSupportedPointFormatsXtn); 1194 return rv; 1195 } 1196 } 1197loser: 1198 /* evil client doesn't support uncompressed */ 1199 ssl3_DisableECCSuites(ss, ecSuites); 1200 return SECFailure; 1201} 1202 1203 1204#define SSL3_GET_SERVER_PUBLICKEY(sock, type) \ 1205 (ss->serverCerts[type].serverKeyPair ? \ 1206 ss->serverCerts[type].serverKeyPair->pubKey : NULL) 1207 1208/* Extract the TLS curve name for the public key in our EC server cert. */ 1209ECName ssl3_GetSvrCertCurveName(sslSocket *ss) 1210{ 1211 SECKEYPublicKey *srvPublicKey; 1212 ECName ec_curve = ec_noName; 1213 1214 srvPublicKey = SSL3_GET_SERVER_PUBLICKEY(ss, kt_ecdh); 1215 if (srvPublicKey) { 1216 ec_curve = params2ecName(&srvPublicKey->u.ec.DEREncodedParams); 1217 } 1218 return ec_curve; 1219} 1220 1221/* Ensure that the curve in our server cert is one of the ones suppored 1222 * by the remote client, and disable all ECC cipher suites if not. 1223 */ 1224SECStatus 1225ssl3_HandleSupportedCurvesXtn(sslSocket *ss, PRUint16 ex_type, SECItem *data) 1226{ 1227 PRInt32 list_len; 1228 PRUint32 peerCurves = 0; 1229 PRUint32 mutualCurves = 0; 1230 PRUint16 svrCertCurveName; 1231 1232 if (!data->data || data->len < 4 || data->len > 65535) 1233 goto loser; 1234 /* get the length of elliptic_curve_list */ 1235 list_len = ssl3_ConsumeHandshakeNumber(ss, 2, &data->data, &data->len); 1236 if (list_len < 0 || data->len != list_len || (data->len % 2) != 0) { 1237 /* malformed */ 1238 goto loser; 1239 } 1240 /* build bit vector of peer's supported curve names */ 1241 while (data->len) { 1242 PRInt32 curve_name = 1243 ssl3_ConsumeHandshakeNumber(ss, 2, &data->data, &data->len); 1244 if (curve_name > ec_noName && curve_name < ec_pastLastName) { 1245 peerCurves |= (1U << curve_name); 1246 } 1247 } 1248 /* What curves do we support in common? */ 1249 mutualCurves = ss->ssl3.hs.negotiatedECCurves &= peerCurves; 1250 if (!mutualCurves) { /* no mutually supported EC Curves */ 1251 goto loser; 1252 } 1253 1254 /* if our ECC cert doesn't use one of these supported curves, 1255 * disable ECC cipher suites that require an ECC cert. 1256 */ 1257 svrCertCurveName = ssl3_GetSvrCertCurveName(ss); 1258 if (svrCertCurveName != ec_noName && 1259 (mutualCurves & (1U << svrCertCurveName)) != 0) { 1260 return SECSuccess; 1261 } 1262 /* Our EC cert doesn't contain a mutually supported curve. 1263 * Disable all ECC cipher suites that require an EC cert 1264 */ 1265 ssl3_DisableECCSuites(ss, ecdh_ecdsa_suites); 1266 ssl3_DisableECCSuites(ss, ecdhe_ecdsa_suites); 1267 return SECFailure; 1268 1269loser: 1270 /* no common curve supported */ 1271 ssl3_DisableECCSuites(ss, ecSuites); 1272 return SECFailure; 1273} 1274 1275#endif /* NSS_ENABLE_ECC */ 1276