5e808468e0667a6a2a8a1e6de80efbc4f42fa0f0 |
|
21-Oct-2014 |
Andre Eisenbach <eisenbach@google.com> |
LE: Do not remove bond on encryption failure If the encryption fails during the re-connection process with a previously paired LE device, the pairing is removed. Thus, a single connection failure could lead to the device be unpaired. This patch prevents unpairing when encryption fails. Additionally, the IRK is restored from NV ram to fix reconnection to dual-mode devices. Bug: 18072300 Change-Id: I077a16d0715fdaa07b95b1c664c18bd839754896
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
d5aa24750c2202ce944560c2c27ead0214e8350d |
|
24-Sep-2014 |
Satya Calloji <satyac@broadcom.com> |
LE: Peer device's latest RPA is not being applied The latest discovered address is not used when reconnecting to devices using resolvable private addresses, if RPA resolution offloadin is not supported in the controller. This patch also address the exception case where BT off is memseting all control value while the IRK list is still being cleaned up. Bug: 17187661 Change-Id: Ifeb5b8297e7eadb0e34ec1afbd41f46bdd836cf3 Author: Chaojing Sun <cjsun@broadcom.com>
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
24adb37e4106bf8544c7729d34451fdf2777c4dc |
|
10-Sep-2014 |
Priti Aghera <paghera@broadcom.com> |
host cannot recover when connection exceed controller capability Host can not initiate new connection when exceed controller capability and connection then drop back to lower than the max. Controller will not generate connection complete event when initaite LE ll connection request failed, and host is dead loop waiting for the connection complete then can not recover. Included a connection complete callback with failure status when controller capability is exceeded. bug 17326529 Change-Id: I9b863578dc868456e092f1d060e50d2c9fdcb441
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
16fe0822ccd3eb6f66d3afd9965d25a0a0cb4c30 |
|
07-Aug-2014 |
Prerepa Viswanadham <dham@google.com> |
Use run time parameters to control LE features Use values read from controller to enable and control LE features such as multi advertising, RPA offload, maximum irk size etc bug 15393216 Change-Id: I193e2b9a0dc61b86f667e986803571440e390160
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
f37456d5a14773e25386629803f7dcaecb37fb99 |
|
04-Aug-2014 |
Andre Eisenbach <eisenbach@google.com> |
LE: Fix random address resolution when done in the stack If the local device does not support random address resolution in the Bluetooth chip, it has to be performed in the host stack. This patch fixes some instances where address resolution was not performed properly, causing device reconnection to fail. Change-Id: Ifb84a9fa44995caa3680d9a0b4248ef911eb9ad0
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
9c07b33b335dfa3b4357f9ee293e1c1c03a7389a |
|
20-Jun-2014 |
Steve Paik <spaik@google.com> |
[bluedroid] Fix slave latency and conn timeout defaults in BLE The default connection parameters were not being applied properly in BLE. Also fixed a typo in btm_ble.c. Change-Id: I6cfb0f2a400740578910dcf4c7192ea16406aa1b Signed-off-by: Steve Paik <spaik@google.com>
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
5344d6dcb09a184eaf1f9e46cc1ac3962822435c |
|
04-May-2014 |
Sharvil Nanavati <sharvil@google.com> |
Logging cleanup: HCI and BTM trace macros. Change-Id: Icdea5aede9fde2c11d0cde745a9bedc26d69640c Conflicts: stack/btm/btm_acl.c stack/btm/btm_ble.c stack/btm/btm_ble_bgconn.c stack/btm/btm_ble_gap.c stack/btm/btm_inq.c stack/btm/btm_pm.c stack/btm/btm_sec.c Conflicts: stack/btm/btm_ble_gap.c stack/btm/btm_sec.c
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
ed534e330bf63c72e778fc8daae09ddd63c395b2 |
|
20-May-2014 |
Wei Wang <weiwa@google.com> |
Revert "Revert "LE: Add RRA offloading and vendor specific PCF commands"" This reverts commit 146bb736bc1cdfd679bbafcf3f33c7af612096b9. Change-Id: Ie4e6b4d7118a622d04c46623add1073906366edf
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
a6ce7751d84218c193eb90d390aef23217b1737e |
|
20-May-2014 |
Wei Wang <weiwa@google.com> |
Revert "Revert "LE Multi ADV feature"" This reverts commit ea85048a8e86b1e1b6b725649f6bb0834ba17301. Change-Id: I9a9305db4fabff07b4309a38f65361dca3f5f37c
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
ea85048a8e86b1e1b6b725649f6bb0834ba17301 |
|
20-May-2014 |
Wei Wang <weiwa@google.com> |
Revert "LE Multi ADV feature" This reverts commit 87776cf5e201b18646cbc16f11a7110d5ffe510c. Change-Id: I5b544a5c965999096b665b1bd2edb021e3054be8
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
146bb736bc1cdfd679bbafcf3f33c7af612096b9 |
|
20-May-2014 |
Wei Wang <weiwa@google.com> |
Revert "LE: Add RRA offloading and vendor specific PCF commands" This reverts commit 15fa3be8ecd576b9ef88e20cf9a6f4bd765cbc6b. Change-Id: Iaa484508ac664d4cb6c94758c2984d53263a902a
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
15fa3be8ecd576b9ef88e20cf9a6f4bd765cbc6b |
|
12-May-2014 |
Satya Calloji <satyac@broadcom.com> |
LE: Add RRA offloading and vendor specific PCF commands Change-Id: Iadca8e73ceaadcd0429421ea70f1b76644e88c42
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
87776cf5e201b18646cbc16f11a7110d5ffe510c |
|
01-May-2014 |
Satya Calloji <satyac@broadcom.com> |
LE Multi ADV feature BTIF and stack changes for LE multi ADV feature Change-Id: I5e009ff8cbac5fc6f92ca943c61c4faf98e4e2ce
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
bea4131cac3214e0ad26ea8258e270448f23f1f3 |
|
09-May-2014 |
Matthew Xie <mattx@google.com> |
Init variables to fix compiler error Change-Id: Ib41ecc8be53f64f10446b758c54eaf41f2a2e725
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
7fa4fba6f59f97df00aff07dbe8fb21b114b3c2c |
|
17-Apr-2014 |
Ganesh Ganapathi Batta <ganeshg@broadcom.com> |
Merge BT 4.1 features The features include: - LE Peripheral Mode - Link Layer topology (LE Central & Peripheral Concurrency) - Dual Mode Topology (Ability to choose LE transport when connecting with other Dual Mode devices) - Fast advertising Interval - Limited Discovery Time Changes - GAP Authentication and Lost Bond - Dual Mode Addressing - Common Profile and Service Error Code - 32 bit UUIDs Change-Id: Ic6701da4cf6aaa390ff2c8816b43157f36b7fb42 Conflicts: stack/btu/btu_hcif.c
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
e2273716129882b8f457913ae126895b690f3544 |
|
19-Mar-2014 |
Zhihai Xu <zhihaixu@google.com> |
Merge "support resolve BLE random mac address for both central and peripheral mode." into klp-modular-dev
|
8b35b3fccc065730e6f0ee1050d3e4528e58ea37 |
|
11-Mar-2014 |
Zhihai Xu <zhihaixu@google.com> |
support resolve BLE random mac address for both central and peripheral mode. bug:12990335 Change-Id: Ica42dcf039487b7b01454ce9255f3f6fae2faaaf
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
af16d11685e040b0cf332e729f8f4a0ab6ef0e16 |
|
09-Mar-2014 |
Zhihai Xu <zhihaixu@google.com> |
am 91f01220: DO NOT MERGE trouble syncing with fitbit and can\'t turn off bluetooth. * commit '91f012208070d71e6e9e0f38aa36e78e99f2ff4e': DO NOT MERGE trouble syncing with fitbit and can't turn off bluetooth.
|
91f012208070d71e6e9e0f38aa36e78e99f2ff4e |
|
15-Jan-2014 |
Zhihai Xu <zhihaixu@google.com> |
DO NOT MERGE trouble syncing with fitbit and can't turn off bluetooth. this is to work around broadcom firmware problem to handle unsolicited command complete event for HCI_LE_Create_Connection_Cancel and LE connection complete event with status error code (0x2) unknown connection identifier from bluetooth controller the workaround is to release the HCI connection to avoid out of sync with bluetooth controller, which cause BT can't be turned off. bug:11614046 Change-Id: Ia5c5ad0c6c9b1a4f03253cac8a7caaf21341c88c
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
bf9a8aa26988aedbc161d75f2688641ce59dc001 |
|
11-Feb-2014 |
Mike J. Chen <mjchen@google.com> |
Fix warnings when BLE_INCLUDED is FALSE Change-Id: I27c8ac6d5410159ed6bbef6aca5bf3b9692b0467 Signed-off-by: Mike J. Chen <mjchen@google.com>
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
5cd8bff2dd0337cb52bf48f312e3d2d55a8882fb |
|
01-Feb-2014 |
Mike J. Chen <mjchen@google.com> |
Major warnings cleanup Mostly fixing unused parameter warnings. A few other warnings also fixed like possible use of unitialized variables (no real issue found, just compiler couldn't follow the path), signed vs unsigned warning. Also fixed some typos, indent issues, removal of dead code, etc. Change-Id: I95eb887aefc4d559d7921f71a0af5f3bfb01ac01 Signed-off-by: Mike J. Chen <mjchen@google.com>
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
306bddadeec993013cfed6bf0e41a1a47a69367c |
|
07-Nov-2013 |
Andre Eisenbach <andre@broadcom.com> |
LE: Add devices to the inquiry db before connecting Ensure that the remote device type is set correctly by reading the device information from non-volatile storage and (re-)adding it to the inquiry database before connecting to a remote GATT device. bug 11573208 Change-Id: Ifa69da3d5871aed5293ea5e611144874b67afe72
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
51822b4229e4519a8e07838f52f858472ea36961 |
|
07-Aug-2013 |
Sunny Kapdi <sunnyk@codeaurora.org> |
Fixes random host disconnection after establishing connection Host starts encryption twice when the remote device is already paired. The host sends disconnect when the second encryption attempt returns failure. This fix avoids duplicate encryption attempt. bug:11450719 Change-Id: I8ec5c4a953180ec17585aece757810421bc44aae
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
6975b4d711142b885af479721cada448952c6b41 |
|
06-Aug-2013 |
Andre Eisenbach <andre@broadcom.com> |
LE: UPF 45 bug fixes This change fixes the following issues: - Second GATT-over-BR/EDR channel cannot be established when there already is an existing GATT-over-BR/EDR channel - If encryption fails for an LE connection due to a missing key, the security state is not being cleared and blocks all further security processing - When DM discovery of an LE Peripheral device fails with a connection timeout, no further discovery requests can be made - GATT service discovery can get into endless loop when duplicate descriptor definitions are found on the remote device - When GATT over BR/EDR fails, BTA does not give a connection callback to the application initiating the connection - BR/EDR connection to remote platform does not generate API callbacks - Stack crash discovered during UPF after remote disconnects - The host is sending HCI disconnect to invalid HCI handle when SMP fails because of a connection timeout - Possible race condition: If a disconnect is immediately followed by a connection complete, the connection complete cannot be processed in the BTA GATT state machine - Write Complete event is not triggered for Prepare Write requests Change-Id: I539cdedd68007818ff4f0d0213cee1c913f72d0f Conflicts: bta/gatt/bta_gatts_act.c
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
781b5adee20e222ef87b56b72bfcd3f64013e4a0 |
|
28-May-2013 |
Andre Eisenbach <andre@broadcom.com> |
LE: Integrate power table for GATT No power table exists for GATT, causing the device to never enter sniff mode while using GATT over BR/EDR. Change-Id: I0db539c1814a61af620f3dba560da64481291beb
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
fc4b2f1953dbe60464d0f5ef7daaa10001fbc62f |
|
07-May-2013 |
Matthew Xie <mattx@google.com> |
Solve compilation problem when BLE/GATT/SMP features are false bug 8664724 Change-Id: I582846ccf4b8995f298d8db533488fceb7993ae3
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
ca22ac493ab777199084d87b3c7627e7f27555af |
|
13-Feb-2013 |
Andre Eisenbach <andre@broadcom.com> |
LE fixes - Null pointer exception check added. An exception occurs at the memcpy in the bta_dm_gatt_disc_result. User removed the battery on Ble device(Smart Nudge) during bonding and connection. This exception occurs sometimes. I used Broadcom LE Explorer to reproduce it. - Fixed disconnect and encryption behaviour Disconnect will now disconnect the physical link immediately when no other application is interested in the device anymore. Also, the connection to a remote device is now dropped if encryption fails. - Deep copy buffers when transfering context Certain BTA server event types require a deep copy of the request data buffers when transfering context. Shallow copy of the pointers involved may cause a crash when overlapping read and write requests are received. - 2nd encryption has not started need to send encryption complete callback when the encryption fail due to link drop without a complete event. Otherwise BTA layer would not be able to clean up the status, and no further encryption can be started. Change-Id: If93e0a188e8779830c8991e4193b96dc95e23e5d
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
ead3cde4bac0c3e32cd31f149093f004eef8ceeb |
|
06-Feb-2013 |
Ganesh Ganapathi Batta <ganeshg@broadcom.com> |
Initial version of BLE support for Bluedroid Change-Id: I9825a5cef9be2559c34c2a529b211b7d471147cf
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|
5738f83aeb59361a0a2eda2460113f6dc9194271 |
|
13-Dec-2012 |
The Android Open Source Project <initial-contribution@android.com> |
Snapshot cdeccf6fdd8c2d494ea2867cb37a025bf8879baf Change-Id: Ia2de32ccb97a9641462c72363b0a8c4288f4f36d
/external/bluetooth/bluedroid/stack/btm/btm_ble.c
|