| 18a1444b4f1e6a0948fd38fa0de382d86cfe04de |
|
31-Dec-2013 |
Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org> |
Add files that would normally be generated by the e2fsprogs build system
Android doesn't run ./configure and friends, so it has to rely on
pre-populated versions of the autogenerated files.
This is somewhat bogus (e.g. hardcoded little-endian reference in
lib/ext2fs/ext2_types.h) and should at some point be fixed, but it's
what Android has always done, not a regression from the 1.41.14 branch.
Also, don't #include config.h which we don't generate (we pass what it
usually contains as -D parameters from Android.mk) anywhere.
Add a new Android.mk file for the quota library.
Change-Id: I162c6327fee5bd06261d9cdcc34bda10f04a6f21
Signed-off-by: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
/external/e2fsprogs/lib/ext2fs/native.c
|
| d1154eb460efe588eaed3d439c1caaca149fa362 |
|
18-Sep-2011 |
Theodore Ts'o <tytso@mit.edu> |
Shorten compile commands run by the build system
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/native.c
|
| 543547a52a20cb7e69d74921b2f691078fd55d83 |
|
18-May-2010 |
Theodore Ts'o <tytso@mit.edu> |
libe2p, libext2fs: Update file copyright permission states to match COPYING
The top-level COPYING file states that the e2p and ext2fs libraries
are available under the LGPLv2. The files were incorrectly labelled.
Alex Thomas/Luster has been consulted wrt to the ext3_extents.h file;
the rest of the files were primarily authored by Theodore Ts'o.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/native.c
|
| efc6f628e15de95bcd13e4f0ee223cb42115d520 |
|
28-Aug-2008 |
Theodore Ts'o <tytso@mit.edu> |
Remove trailing whitespace for the entire source tree
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/lib/ext2fs/native.c
|
| 5df55d7f847e29d23227592a0bb23daad1a61500 |
|
11-Jun-2001 |
Theodore Ts'o <tytso@mit.edu> |
ChangeLog, Makefile.in, swapfs.c, unix.c:
Makefile.in: Add message.c and swapfs.c to the list of source files to
build the make depend.
swapfs.c, unix.c: Only support the -s and -S options to e2fsck if
ENABLE_SWAPFS is defined.
Many files:
ext2fs.h, bitops.h, block.c, bmap.c, closefs.c, dirblock.c, inode.c,
native.c, openfs.c, rw_bitmaps.c, swapfs.c: Only include the
byte-swapping logic if ENABLE_SWAPFS is turned on or if we're on a
big-endian machine.
initialize.c (ext2fs_initialize):Use WORDS_BIGENDIAN directly to set
EXT2_FLAG_SWAP_BYTES, instead of using ext2fs_native_flag.
native.c (ext2fs_native_flag): Use WORDS_BIGENDIAN provided by
autoconf to determine whether or not return EXT2_FLAG_SWAP_BYTES.
/external/e2fsprogs/lib/ext2fs/native.c
|
| 9f8046fc6dfc13eee2f5c363214e60b533872cac |
|
14-May-2001 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
alloc.c, alloc_tables.c, badblocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c, dblist_dir.c,
dir_iterate.c, dirblock.c, dupfs.c, expanddir.c, ext2_fs.h, fileio.c,
finddev.c, flushb.c, freefs.c, get_pathname.c, getsize.c, icount.c,
imager.c, initialize.c, inline.c, inode.c, irel_ma.c, ismounted.c,
link.c, lookup.c, mkdir.c, mkjournal.c, namei.c, native.c, newdir.c,
nt_io.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c, tst_byteswap.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c, write_bb_file.c, ext2_fs.h: Moved file from include/linux.
Adjust all files in this directroy to include this file.
/external/e2fsprogs/lib/ext2fs/native.c
|
| b5abe6fac9c9e7caf4710501d1657d30e4857ef6 |
|
19-Jan-1998 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
inode.c (ext2fs_open_inode_scan): Initialize the group variables
so that we don't need to call get_next_blockgroup() the first
time around. Saves a bit of time, and prevents us from
needing to assign -1 to current_group (which is an unsigned
value).
icount.c (insert_icount_el): Cast the estimated number of inodes
from a float to an ino_t.
alloc.c, alloc_tables.c, badlbocks.c, bb_compat.c, bb_inode.c,
bitmaps.c, bitops.c, block.c, bmap.c, bmove.c, brel_ma.c,
check_desc.c, closefs.c, cmp_bitmaps.c, dblist.c,
dblist_dir.c, dir_iterate.c, dirblock.c, dupfs.c, expanddir.c,
ext2fs.h, fileio.c, freefs.c, get_pathname.c, getsize.c,
icount.c, initialize.c, inline.c, inode.c, irel_ma.c,
ismounted.c, link.c, lookup.c, mkdir.c, namei.c, native.c,
newdir.c, openfs.c, read_bb.c, read_bb_file.c, rs_bitmap.c,
rw_bitmaps.c, swapfs.c, test_io.c, tst_badblocks.c,
tst_getsize.c, tst_iscan.c, unix_io.c, unlink.c, valid_blk.c,
version.c: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
block.c, bmove.c, dirblock.c, fileio.c: Explicitly cast
all assignments from void * to be compatible with C++.
closefs.c (ext2fs_flush): Add a call to io_channel_flush() to
make sure the contents of the disk are flushed to disk.
dblist.c (ext2fs_add_dir_block): Change new to be new_entry to
avoid C++ namespace clash.
bitmaps.c (ext2fs_copy_bitmap): Change new to be new_map to
avoid C++ namespace clash.
ext2fs.h, bb_inode.c, block.c, bmove.c, brel.h, brel_ma.c,
irel.h, irel_ma.c, dblist.c, dblist_dir.c, dir_iterate.c,
ext2fsP.h, expanddir.c, get_pathname.c, inode.c, link.c,
unlink.c: Change private to be priv_data (to avoid C++
namespace clash)
/external/e2fsprogs/lib/ext2fs/native.c
|
| 19c78dc07fce2d6f39b5e541562afc3ca1ea38ff |
|
29-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checked in e2fsprogs-1.07
/external/e2fsprogs/lib/ext2fs/native.c
|
| 5c576477ccb2f0ca8c5d5af2e2354fd8eeff1589 |
|
29-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checked in e2fsprogs 1.06
/external/e2fsprogs/lib/ext2fs/native.c
|
| 1e3472c5f37ca3686dd69b079d4d02a302f5798d |
|
29-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checked in e2fsprogs 1.05
/external/e2fsprogs/lib/ext2fs/native.c
|