1# Makefile.in generated by automake 1.10.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18pkgdatadir = $(datadir)/@PACKAGE@
19pkglibdir = $(libdir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
22install_sh_DATA = $(install_sh) -c -m 644
23install_sh_PROGRAM = $(install_sh) -c
24install_sh_SCRIPT = $(install_sh) -c
25INSTALL_HEADER = $(INSTALL_DATA)
26transform = $(program_transform_name)
27NORMAL_INSTALL = :
28PRE_INSTALL = :
29POST_INSTALL = :
30NORMAL_UNINSTALL = :
31PRE_UNINSTALL = :
32POST_UNINSTALL = :
33build_triplet = @build@
34host_triplet = @host@
35target_triplet = @target@
36subdir = doc
37DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
38	$(srcdir)/Makefile.in
39ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \
41	$(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \
42	$(top_srcdir)/configure.ac
43am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44	$(ACLOCAL_M4)
45mkinstalldirs = $(install_sh) -d
46CONFIG_HEADER = $(top_builddir)/config.h
47CONFIG_CLEAN_FILES = Doxyfile
48SOURCES =
49DIST_SOURCES =
50RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
51	html-recursive info-recursive install-data-recursive \
52	install-dvi-recursive install-exec-recursive \
53	install-html-recursive install-info-recursive \
54	install-pdf-recursive install-ps-recursive install-recursive \
55	installcheck-recursive installdirs-recursive pdf-recursive \
56	ps-recursive uninstall-recursive
57am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
58am__vpath_adj = case $$p in \
59    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
60    *) f=$$p;; \
61  esac;
62am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
63am__installdirs = "$(DESTDIR)$(docdir)"
64docDATA_INSTALL = $(INSTALL_DATA)
65DATA = $(doc_DATA)
66RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
67  distclean-recursive maintainer-clean-recursive
68ETAGS = etags
69CTAGS = ctags
70DIST_SUBDIRS = $(SUBDIRS)
71DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
72ACLOCAL = @ACLOCAL@
73ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
74ALLOCA = @ALLOCA@
75AMTAR = @AMTAR@
76AR = @AR@
77AS = @AS@
78AUTOCONF = @AUTOCONF@
79AUTOHEADER = @AUTOHEADER@
80AUTOMAKE = @AUTOMAKE@
81AWK = @AWK@
82CC = @CC@
83CCDEPMODE = @CCDEPMODE@
84CFLAGS = @CFLAGS@
85CPP = @CPP@
86CPPFLAGS = @CPPFLAGS@
87CYGPATH_W = @CYGPATH_W@
88DEBUG = @DEBUG@
89DEFS = @DEFS@
90DEPDIR = @DEPDIR@
91DLLTOOL = @DLLTOOL@
92DSYMUTIL = @DSYMUTIL@
93DUMPBIN = @DUMPBIN@
94ECHO_C = @ECHO_C@
95ECHO_N = @ECHO_N@
96ECHO_T = @ECHO_T@
97EGREP = @EGREP@
98EXEEXT = @EXEEXT@
99FGREP = @FGREP@
100GREP = @GREP@
101HAVE_DOXYGEN = @HAVE_DOXYGEN@
102HTLATEX = @HTLATEX@
103INSTALL = @INSTALL@
104INSTALL_DATA = @INSTALL_DATA@
105INSTALL_PROGRAM = @INSTALL_PROGRAM@
106INSTALL_SCRIPT = @INSTALL_SCRIPT@
107INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
108LD = @LD@
109LDFLAGS = @LDFLAGS@
110LIBOBJS = @LIBOBJS@
111LIBS = @LIBS@
112LIBTOOL = @LIBTOOL@
113LIBTOOL_DEPS = @LIBTOOL_DEPS@
114LIPO = @LIPO@
115LN_S = @LN_S@
116LTLIBOBJS = @LTLIBOBJS@
117MAINT = @MAINT@
118MAKEINFO = @MAKEINFO@
119MKDIR_P = @MKDIR_P@
120NM = @NM@
121NMEDIT = @NMEDIT@
122OBJDUMP = @OBJDUMP@
123OBJEXT = @OBJEXT@
124OGG_CFLAGS = @OGG_CFLAGS@
125OGG_LIBS = @OGG_LIBS@
126OTOOL = @OTOOL@
127OTOOL64 = @OTOOL64@
128PACKAGE = @PACKAGE@
129PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
130PACKAGE_NAME = @PACKAGE_NAME@
131PACKAGE_STRING = @PACKAGE_STRING@
132PACKAGE_TARNAME = @PACKAGE_TARNAME@
133PACKAGE_VERSION = @PACKAGE_VERSION@
134PATH_SEPARATOR = @PATH_SEPARATOR@
135PDFLATEX = @PDFLATEX@
136PKG_CONFIG = @PKG_CONFIG@
137PROFILE = @PROFILE@
138RANLIB = @RANLIB@
139SED = @SED@
140SET_MAKE = @SET_MAKE@
141SHELL = @SHELL@
142STRIP = @STRIP@
143VERSION = @VERSION@
144VE_LIB_AGE = @VE_LIB_AGE@
145VE_LIB_CURRENT = @VE_LIB_CURRENT@
146VE_LIB_REVISION = @VE_LIB_REVISION@
147VF_LIB_AGE = @VF_LIB_AGE@
148VF_LIB_CURRENT = @VF_LIB_CURRENT@
149VF_LIB_REVISION = @VF_LIB_REVISION@
150VORBIS_LIBS = @VORBIS_LIBS@
151V_LIB_AGE = @V_LIB_AGE@
152V_LIB_CURRENT = @V_LIB_CURRENT@
153V_LIB_REVISION = @V_LIB_REVISION@
154abs_builddir = @abs_builddir@
155abs_srcdir = @abs_srcdir@
156abs_top_builddir = @abs_top_builddir@
157abs_top_srcdir = @abs_top_srcdir@
158ac_ct_CC = @ac_ct_CC@
159ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
160am__include = @am__include@
161am__leading_dot = @am__leading_dot@
162am__quote = @am__quote@
163am__tar = @am__tar@
164am__untar = @am__untar@
165bindir = @bindir@
166build = @build@
167build_alias = @build_alias@
168build_cpu = @build_cpu@
169build_os = @build_os@
170build_vendor = @build_vendor@
171builddir = @builddir@
172datadir = @datadir@
173datarootdir = @datarootdir@
174docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
175dvidir = @dvidir@
176exec_prefix = @exec_prefix@
177host = @host@
178host_alias = @host_alias@
179host_cpu = @host_cpu@
180host_os = @host_os@
181host_vendor = @host_vendor@
182htmldir = @htmldir@
183includedir = @includedir@
184infodir = @infodir@
185install_sh = @install_sh@
186libdir = @libdir@
187libexecdir = @libexecdir@
188localedir = @localedir@
189localstatedir = @localstatedir@
190lt_ECHO = @lt_ECHO@
191mandir = @mandir@
192mkdir_p = @mkdir_p@
193oldincludedir = @oldincludedir@
194pdfdir = @pdfdir@
195prefix = @prefix@
196program_transform_name = @program_transform_name@
197psdir = @psdir@
198pthread_lib = @pthread_lib@
199sbindir = @sbindir@
200sharedstatedir = @sharedstatedir@
201srcdir = @srcdir@
202sysconfdir = @sysconfdir@
203target = @target@
204target_alias = @target_alias@
205target_cpu = @target_cpu@
206target_os = @target_os@
207target_vendor = @target_vendor@
208top_builddir = @top_builddir@
209top_srcdir = @top_srcdir@
210SUBDIRS = vorbisfile vorbisenc
211
212### all of the static docs, commited to SVN and included as is
213static_docs = \
214	rfc5215.xml \
215	rfc5215.txt \
216	eightphase.png \
217	evenlsp.png \
218	fish_xiph_org.png \
219	floor1_inverse_dB_table.html \
220	floorval.png \
221	fourphase.png \
222	framing.html \
223	helper.html \
224	index.html \
225	lspmap.png \
226	oddlsp.png \
227	oggstream.html \
228	programming.html \
229	squarepolar.png \
230	stereo.html \
231	stream.png \
232	v-comment.html \
233	vorbis-clip.txt \
234	vorbis-errors.txt \
235	vorbis-fidelity.html \
236	vorbis.html \
237	vorbisword2.png \
238	wait.png \
239	white-xifish.png
240
241
242# bits needed by the spec
243SPEC_PNG = \
244	components.png \
245	floor1-1.png \
246	floor1-2.png \
247	floor1-3.png \
248	floor1-4.png \
249	hufftree.png \
250	hufftree-under.png \
251	residue-pack.png \
252	residue2.png \
253	white-xifish.png \
254	window1.png \
255	window2.png
256
257SPEC_PDF = xifish.pdf
258
259# FIXME: also needed here
260#	white-xifish.png 
261SPEC_TEX = \
262	Vorbis_I_spec.tex \
263	01-introduction.tex \
264	02-bitpacking.tex \
265	03-codebook.tex \
266	04-codec.tex   \
267	05-comment.tex \
268	06-floor0.tex  \
269	07-floor1.tex  \
270	08-residue.tex \
271	09-helper.tex  \
272	10-tables.tex  \
273	a1-encapsulation-ogg.tex \
274	a2-encapsulation-rtp.tex \
275	footer.tex
276
277built_docs = Vorbis_I_spec.pdf Vorbis_I_spec.html Vorbis_I_spec.css
278@BUILD_DOCS_FALSE@doc_DATA = $(static_docs) doxygen-build.stamp
279
280# conditionally make the generated documentation
281@BUILD_DOCS_TRUE@doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs) doxygen-build.stamp
282EXTRA_DIST = $(static_docs) $(built_docs) \
283	$(SPEC_TEX) $(SPEC_PNG) $(SPEC_PDF) Vorbis_I_spec.cfg Doxyfile.in
284
285
286# these are expensive; only remove if we have to
287MAINTAINERCLEANFILES = $(built_docs)
288CLEANFILES = $(SPEC_TEX:%.tex=%.aux) \
289	     Vorbis_I_spec.4ct Vorbis_I_spec.4tc \
290	     Vorbis_I_spec.dvi Vorbis_I_spec.idv \
291	     Vorbis_I_spec.lg  Vorbis_I_spec.log \
292	     Vorbis_I_spec.out Vorbis_I_spec.tmp \
293	     Vorbis_I_spec.toc Vorbis_I_spec.xref \
294	     Vorbis_I_spec*.png \
295	     zzVorbis_I_spec.ps xifish.png
296
297DISTCLEANFILES = $(built_docs)
298all: all-recursive
299
300.SUFFIXES:
301$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
302	@for dep in $?; do \
303	  case '$(am__configure_deps)' in \
304	    *$$dep*) \
305	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
306	        && { if test -f $@; then exit 0; else break; fi; }; \
307	      exit 1;; \
308	  esac; \
309	done; \
310	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
311	cd $(top_srcdir) && \
312	  $(AUTOMAKE) --gnu  doc/Makefile
313.PRECIOUS: Makefile
314Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
315	@case '$?' in \
316	  *config.status*) \
317	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
318	  *) \
319	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
320	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
321	esac;
322
323$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
324	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
325
326$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
327	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
328$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
329	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
330Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
331	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
332
333mostlyclean-libtool:
334	-rm -f *.lo
335
336clean-libtool:
337	-rm -rf .libs _libs
338install-docDATA: $(doc_DATA)
339	@$(NORMAL_INSTALL)
340	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
341	@list='$(doc_DATA)'; for p in $$list; do \
342	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
343	  f=$(am__strip_dir) \
344	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
345	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
346	done
347
348uninstall-docDATA:
349	@$(NORMAL_UNINSTALL)
350	@list='$(doc_DATA)'; for p in $$list; do \
351	  f=$(am__strip_dir) \
352	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
353	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
354	done
355
356# This directory's subdirectories are mostly independent; you can cd
357# into them and run `make' without going through this Makefile.
358# To change the values of `make' variables: instead of editing Makefiles,
359# (1) if the variable is set in `config.status', edit `config.status'
360#     (which will cause the Makefiles to be regenerated when you run `make');
361# (2) otherwise, pass the desired values on the `make' command line.
362$(RECURSIVE_TARGETS):
363	@failcom='exit 1'; \
364	for f in x $$MAKEFLAGS; do \
365	  case $$f in \
366	    *=* | --[!k]*);; \
367	    *k*) failcom='fail=yes';; \
368	  esac; \
369	done; \
370	dot_seen=no; \
371	target=`echo $@ | sed s/-recursive//`; \
372	list='$(SUBDIRS)'; for subdir in $$list; do \
373	  echo "Making $$target in $$subdir"; \
374	  if test "$$subdir" = "."; then \
375	    dot_seen=yes; \
376	    local_target="$$target-am"; \
377	  else \
378	    local_target="$$target"; \
379	  fi; \
380	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
381	  || eval $$failcom; \
382	done; \
383	if test "$$dot_seen" = "no"; then \
384	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
385	fi; test -z "$$fail"
386
387$(RECURSIVE_CLEAN_TARGETS):
388	@failcom='exit 1'; \
389	for f in x $$MAKEFLAGS; do \
390	  case $$f in \
391	    *=* | --[!k]*);; \
392	    *k*) failcom='fail=yes';; \
393	  esac; \
394	done; \
395	dot_seen=no; \
396	case "$@" in \
397	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
398	  *) list='$(SUBDIRS)' ;; \
399	esac; \
400	rev=''; for subdir in $$list; do \
401	  if test "$$subdir" = "."; then :; else \
402	    rev="$$subdir $$rev"; \
403	  fi; \
404	done; \
405	rev="$$rev ."; \
406	target=`echo $@ | sed s/-recursive//`; \
407	for subdir in $$rev; do \
408	  echo "Making $$target in $$subdir"; \
409	  if test "$$subdir" = "."; then \
410	    local_target="$$target-am"; \
411	  else \
412	    local_target="$$target"; \
413	  fi; \
414	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
415	  || eval $$failcom; \
416	done && test -z "$$fail"
417tags-recursive:
418	list='$(SUBDIRS)'; for subdir in $$list; do \
419	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
420	done
421ctags-recursive:
422	list='$(SUBDIRS)'; for subdir in $$list; do \
423	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
424	done
425
426ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
427	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
428	unique=`for i in $$list; do \
429	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
430	  done | \
431	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
432	      END { if (nonempty) { for (i in files) print i; }; }'`; \
433	mkid -fID $$unique
434tags: TAGS
435
436TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
437		$(TAGS_FILES) $(LISP)
438	tags=; \
439	here=`pwd`; \
440	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
441	  include_option=--etags-include; \
442	  empty_fix=.; \
443	else \
444	  include_option=--include; \
445	  empty_fix=; \
446	fi; \
447	list='$(SUBDIRS)'; for subdir in $$list; do \
448	  if test "$$subdir" = .; then :; else \
449	    test ! -f $$subdir/TAGS || \
450	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
451	  fi; \
452	done; \
453	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
454	unique=`for i in $$list; do \
455	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
456	  done | \
457	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
458	      END { if (nonempty) { for (i in files) print i; }; }'`; \
459	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
460	  test -n "$$unique" || unique=$$empty_fix; \
461	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
462	    $$tags $$unique; \
463	fi
464ctags: CTAGS
465CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
466		$(TAGS_FILES) $(LISP)
467	tags=; \
468	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
469	unique=`for i in $$list; do \
470	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
471	  done | \
472	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
473	      END { if (nonempty) { for (i in files) print i; }; }'`; \
474	test -z "$(CTAGS_ARGS)$$tags$$unique" \
475	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
476	     $$tags $$unique
477
478GTAGS:
479	here=`$(am__cd) $(top_builddir) && pwd` \
480	  && cd $(top_srcdir) \
481	  && gtags -i $(GTAGS_ARGS) $$here
482
483distclean-tags:
484	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
485
486distdir: $(DISTFILES)
487	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
488	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
489	list='$(DISTFILES)'; \
490	  dist_files=`for file in $$list; do echo $$file; done | \
491	  sed -e "s|^$$srcdirstrip/||;t" \
492	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
493	case $$dist_files in \
494	  */*) $(MKDIR_P) `echo "$$dist_files" | \
495			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
496			   sort -u` ;; \
497	esac; \
498	for file in $$dist_files; do \
499	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
500	  if test -d $$d/$$file; then \
501	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
502	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
503	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
504	    fi; \
505	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
506	  else \
507	    test -f $(distdir)/$$file \
508	    || cp -p $$d/$$file $(distdir)/$$file \
509	    || exit 1; \
510	  fi; \
511	done
512	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
513	  if test "$$subdir" = .; then :; else \
514	    test -d "$(distdir)/$$subdir" \
515	    || $(MKDIR_P) "$(distdir)/$$subdir" \
516	    || exit 1; \
517	    distdir=`$(am__cd) $(distdir) && pwd`; \
518	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
519	    (cd $$subdir && \
520	      $(MAKE) $(AM_MAKEFLAGS) \
521	        top_distdir="$$top_distdir" \
522	        distdir="$$distdir/$$subdir" \
523		am__remove_distdir=: \
524		am__skip_length_check=: \
525	        distdir) \
526	      || exit 1; \
527	  fi; \
528	done
529check-am: all-am
530check: check-recursive
531all-am: Makefile $(DATA)
532installdirs: installdirs-recursive
533installdirs-am:
534	for dir in "$(DESTDIR)$(docdir)"; do \
535	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
536	done
537install: install-recursive
538install-exec: install-exec-recursive
539install-data: install-data-recursive
540uninstall: uninstall-recursive
541
542install-am: all-am
543	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
544
545installcheck: installcheck-recursive
546install-strip:
547	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
548	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
549	  `test -z '$(STRIP)' || \
550	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
551mostlyclean-generic:
552
553clean-generic:
554	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
555
556distclean-generic:
557	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
558	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
559
560maintainer-clean-generic:
561	@echo "This command is intended for maintainers to use"
562	@echo "it deletes files that may require special tools to rebuild."
563	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
564clean: clean-recursive
565
566clean-am: clean-generic clean-libtool clean-local mostlyclean-am
567
568distclean: distclean-recursive
569	-rm -f Makefile
570distclean-am: clean-am distclean-generic distclean-tags
571
572dvi: dvi-recursive
573
574dvi-am:
575
576html: html-recursive
577
578info: info-recursive
579
580info-am:
581
582install-data-am: install-data-local install-docDATA
583
584install-dvi: install-dvi-recursive
585
586install-exec-am:
587
588install-html: install-html-recursive
589
590install-info: install-info-recursive
591
592install-man:
593
594install-pdf: install-pdf-recursive
595
596install-ps: install-ps-recursive
597
598installcheck-am:
599
600maintainer-clean: maintainer-clean-recursive
601	-rm -f Makefile
602maintainer-clean-am: distclean-am maintainer-clean-generic
603
604mostlyclean: mostlyclean-recursive
605
606mostlyclean-am: mostlyclean-generic mostlyclean-libtool
607
608pdf: pdf-recursive
609
610pdf-am:
611
612ps: ps-recursive
613
614ps-am:
615
616uninstall-am: uninstall-docDATA uninstall-local
617
618.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
619	install-strip
620
621.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
622	all all-am check check-am clean clean-generic clean-libtool \
623	clean-local ctags ctags-recursive distclean distclean-generic \
624	distclean-libtool distclean-tags distdir dvi dvi-am html \
625	html-am info info-am install install-am install-data \
626	install-data-am install-data-local install-docDATA install-dvi \
627	install-dvi-am install-exec install-exec-am install-html \
628	install-html-am install-info install-info-am install-man \
629	install-pdf install-pdf-am install-ps install-ps-am \
630	install-strip installcheck installcheck-am installdirs \
631	installdirs-am maintainer-clean maintainer-clean-generic \
632	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
633	ps ps-am tags tags-recursive uninstall uninstall-am \
634	uninstall-docDATA uninstall-local
635
636
637# explicit rules for generating docs
638@BUILD_DOCS_TRUE@xifish.png: white-xifish.png
639@BUILD_DOCS_TRUE@	cp $< $@
640
641@BUILD_DOCS_TRUE@Vorbis_I_spec.html Vorbis_I_spec.css: $(SPEC_TEX) $(SPEC_PNG) xifish.png
642@BUILD_DOCS_TRUE@	htlatex $<
643
644@BUILD_DOCS_TRUE@Vorbis_I_spec.pdf: $(SPEC_TEX) $(SPEC_PNG) xifish.png
645@BUILD_DOCS_TRUE@	pdflatex $<
646@BUILD_DOCS_TRUE@	pdflatex $<
647@BUILD_DOCS_TRUE@	pdflatex $<
648@BUILD_DOCS_FALSE@Vorbis_I_spec.html: NO_DOCS_ERROR
649@BUILD_DOCS_FALSE@Vorbis_I_spec.pdf: NO_DOCS_ERROR
650@BUILD_DOCS_FALSE@NO_DOCS_ERROR:
651@BUILD_DOCS_FALSE@	@echo
652@BUILD_DOCS_FALSE@	@echo "*** Documentation has not been built! ***"
653@BUILD_DOCS_FALSE@	@echo "Try re-running after passing --enable-docs to configure."
654@BUILD_DOCS_FALSE@	@echo
655
656@HAVE_DOXYGEN_TRUE@doxygen-build.stamp: Doxyfile $(top_srcdir)/include/vorbis/*.h
657@HAVE_DOXYGEN_TRUE@	doxygen
658@HAVE_DOXYGEN_TRUE@	touch doxygen-build.stamp
659@HAVE_DOXYGEN_FALSE@doxygen-build.stamp:
660@HAVE_DOXYGEN_FALSE@	echo "*** Warning: Doxygen not found; documentation will not be built."
661@HAVE_DOXYGEN_FALSE@	touch doxygen-build.stamp
662
663install-data-local: doxygen-build.stamp
664	$(mkinstalldirs) $(DESTDIR)$(docdir)
665	if test -d vorbis; then \
666	  for dir in vorbis/*; do \
667	    if test -d $$dir; then \
668	      b=`basename $$dir`; \
669	      $(mkinstalldirs) $(DESTDIR)$(docdir)/$$b; \
670	      for f in $$dir/*; do \
671		$(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$b; \
672	      done \
673	    fi \
674	  done \
675	fi
676
677uninstall-local:
678	rm -rf $(DESTDIR)$(docdir)
679
680clean-local:
681	if test -d vorbis; then rm -rf vorbis; fi
682	if test -f doxygen-build.stamp; then rm -f doxygen-build.stamp; fi
683# Tell versions [3.59,3.63) of GNU make to not export all variables.
684# Otherwise a system limit (for SysV at least) may be exceeded.
685.NOEXPORT:
686