1/* config.h.  Generated from config.h.in by configure.  */
2/* config.h.in.  Generated from configure.ac by autoheader.  */
3
4/* PCRE is written in Standard C, but there are a few non-standard things it
5can cope with, allowing it to run on SunOS4 and other "close to standard"
6systems.
7
8In environments that support the GNU autotools, config.h.in is converted into
9config.h by the "configure" script. In environments that use CMake,
10config-cmake.in is converted into config.h. If you are going to build PCRE "by
11hand" without using "configure" or CMake, you should copy the distributed
12config.h.generic to config.h, and edit the macro definitions to be the way you
13need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
14so that config.h is included at the start of every source.
15
16Alternatively, you can avoid editing by using -D on the compiler command line
17to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
18but if you do, default values will be taken from config.h for non-boolean
19macros that are not defined on the command line.
20
21Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE8 should either be defined
22(conventionally to 1) for TRUE, and not defined at all for FALSE. All such
23macros are listed as a commented #undef in config.h.generic. Macros such as
24MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
25surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
26
27PCRE uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
28HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
29sure both macros are undefined; an emulation function will then be used. */
30
31/* By default, the \R escape sequence matches any Unicode line ending
32   character or sequence of characters. If BSR_ANYCRLF is defined (to any
33   value), this is changed so that backslash-R matches only CR, LF, or CRLF.
34   The build-time default can be overridden by the user of PCRE at runtime. */
35/* #undef BSR_ANYCRLF */
36
37/* If you are compiling for a system that uses EBCDIC instead of ASCII
38   character codes, define this macro to any value. You must also edit the
39   NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15).
40   On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is
41   automatically adjusted. When EBCDIC is set, PCRE assumes that all input
42   strings are in EBCDIC. If you do not define this macro, PCRE will assume
43   input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build
44   a version of PCRE that supports both EBCDIC and UTF-8/16/32. */
45/* #undef EBCDIC */
46
47/* In an EBCDIC environment, define this macro to any value to arrange for the
48   NL character to be 0x25 instead of the default 0x15. NL plays the role that
49   LF does in an ASCII/Unicode environment. The value must also be set in the
50   NEWLINE macro below. On systems that can use "configure" or CMake to set
51   EBCDIC_NL25, the adjustment of NEWLINE is automatic. */
52/* #undef EBCDIC_NL25 */
53
54/* Define to 1 if you have the `bcopy' function. */
55/* #undef HAVE_BCOPY */
56
57/* Define to 1 if you have the <bits/type_traits.h> header file. */
58/* #undef HAVE_BITS_TYPE_TRAITS_H */
59
60/* Define to 1 if you have the <bzlib.h> header file. */
61/* #undef HAVE_BZLIB_H */
62
63/* Define to 1 if you have the <dirent.h> header file. */
64/* #undef HAVE_DIRENT_H */
65
66/* Define to 1 if you have the <dlfcn.h> header file. */
67/* #undef HAVE_DLFCN_H */
68
69/* Define to 1 if you have the <editline/readline.h> header file. */
70/* #undef HAVE_EDITLINE_READLINE_H */
71
72/* Define to 1 if you have the <edit/readline/readline.h> header file. */
73/* #undef HAVE_EDIT_READLINE_READLINE_H */
74
75/* Define to 1 if you have the <inttypes.h> header file. */
76/* #undef HAVE_INTTYPES_H */
77
78/* Define to 1 if you have the <limits.h> header file. */
79/* #undef HAVE_LIMITS_H */
80
81/* Define to 1 if the system has the type `long long'. */
82/* #undef HAVE_LONG_LONG */
83
84/* Define to 1 if you have the `memmove' function. */
85/* #undef HAVE_MEMMOVE */
86
87/* Define to 1 if you have the <memory.h> header file. */
88/* #undef HAVE_MEMORY_H */
89
90/* Define if you have POSIX threads libraries and header files. */
91/* #undef HAVE_PTHREAD */
92
93/* Have PTHREAD_PRIO_INHERIT. */
94/* #undef HAVE_PTHREAD_PRIO_INHERIT */
95
96/* Define to 1 if you have the <readline/history.h> header file. */
97/* #undef HAVE_READLINE_HISTORY_H */
98
99/* Define to 1 if you have the <readline/readline.h> header file. */
100/* #undef HAVE_READLINE_READLINE_H */
101
102/* Define to 1 if you have the <stdint.h> header file. */
103/* #undef HAVE_STDINT_H */
104
105/* Define to 1 if you have the <stdlib.h> header file. */
106/* #undef HAVE_STDLIB_H */
107
108/* Define to 1 if you have the `strerror' function. */
109/* #undef HAVE_STRERROR */
110
111/* Define to 1 if you have the <string> header file. */
112/* #undef HAVE_STRING */
113
114/* Define to 1 if you have the <strings.h> header file. */
115/* #undef HAVE_STRINGS_H */
116
117/* Define to 1 if you have the <string.h> header file. */
118/* #undef HAVE_STRING_H */
119
120/* Define to 1 if you have `strtoimax'. */
121/* #undef HAVE_STRTOIMAX */
122
123/* Define to 1 if you have `strtoll'. */
124/* #undef HAVE_STRTOLL */
125
126/* Define to 1 if you have `strtoq'. */
127/* #undef HAVE_STRTOQ */
128
129/* Define to 1 if you have the <sys/stat.h> header file. */
130/* #undef HAVE_SYS_STAT_H */
131
132/* Define to 1 if you have the <sys/types.h> header file. */
133/* #undef HAVE_SYS_TYPES_H */
134
135/* Define to 1 if you have the <type_traits.h> header file. */
136/* #undef HAVE_TYPE_TRAITS_H */
137
138/* Define to 1 if you have the <unistd.h> header file. */
139/* #undef HAVE_UNISTD_H */
140
141/* Define to 1 if the system has the type `unsigned long long'. */
142/* #undef HAVE_UNSIGNED_LONG_LONG */
143
144/* Define to 1 if the compiler supports simple visibility declarations. */
145/* #undef HAVE_VISIBILITY */
146
147/* Define to 1 if you have the <windows.h> header file. */
148/* #undef HAVE_WINDOWS_H */
149
150/* Define to 1 if you have the <zlib.h> header file. */
151/* #undef HAVE_ZLIB_H */
152
153/* Define to 1 if you have `_strtoi64'. */
154/* #undef HAVE__STRTOI64 */
155
156/* The value of LINK_SIZE determines the number of bytes used to store links
157   as offsets within the compiled regex. The default is 2, which allows for
158   compiled patterns up to 64K long. This covers the vast majority of cases.
159   However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
160   for longer patterns in extreme cases. */
161#ifndef LINK_SIZE
162#define LINK_SIZE 2
163#endif
164
165/* Define to the sub-directory in which libtool stores uninstalled libraries.
166   */
167/* This is ignored unless you are using libtool. */
168#ifndef LT_OBJDIR
169#define LT_OBJDIR ".libs/"
170#endif
171
172/* The value of MATCH_LIMIT determines the default number of times the
173   internal match() function can be called during a single execution of
174   pcre_exec(). There is a runtime interface for setting a different limit.
175   The limit exists in order to catch runaway regular expressions that take
176   for ever to determine that they do not match. The default is set very large
177   so that it does not accidentally catch legitimate cases. */
178#ifndef MATCH_LIMIT
179#define MATCH_LIMIT 10000000
180#endif
181
182/* The above limit applies to all calls of match(), whether or not they
183   increase the recursion depth. In some environments it is desirable to limit
184   the depth of recursive calls of match() more strictly, in order to restrict
185   the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
186   used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
187   match(). To have any useful effect, it must be less than the value of
188   MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
189   a runtime method for setting a different limit. */
190#ifndef MATCH_LIMIT_RECURSION
191#define MATCH_LIMIT_RECURSION MATCH_LIMIT
192#endif
193
194/* This limit is parameterized just in case anybody ever wants to change it.
195   Care must be taken if it is increased, because it guards against integer
196   overflow caused by enormously large patterns. */
197#ifndef MAX_NAME_COUNT
198#define MAX_NAME_COUNT 10000
199#endif
200
201/* This limit is parameterized just in case anybody ever wants to change it.
202   Care must be taken if it is increased, because it guards against integer
203   overflow caused by enormously large patterns. */
204#ifndef MAX_NAME_SIZE
205#define MAX_NAME_SIZE 32
206#endif
207
208/* The value of NEWLINE determines the default newline character sequence.
209   PCRE client programs can override this by selecting other values at run
210   time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338
211   (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or
212   3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and
213   0x25) that are used as the NL line terminator that is equivalent to ASCII
214   LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY),
215   or -2 (ANYCRLF). */
216#ifndef NEWLINE
217#define NEWLINE 10
218#endif
219
220/* PCRE uses recursive function calls to handle backtracking while matching.
221   This can sometimes be a problem on systems that have stacks of limited
222   size. Define NO_RECURSE to any value to get a version that doesn't use
223   recursion in the match() function; instead it creates its own stack by
224   steam using pcre_recurse_malloc() to obtain memory from the heap. For more
225   detail, see the comments and other stuff just above the match() function.
226   */
227/* #undef NO_RECURSE */
228
229/* Name of package */
230#define PACKAGE "pcre"
231
232/* Define to the address where bug reports for this package should be sent. */
233#define PACKAGE_BUGREPORT ""
234
235/* Define to the full name of this package. */
236#define PACKAGE_NAME "PCRE"
237
238/* Define to the full name and version of this package. */
239#define PACKAGE_STRING "PCRE 8.36"
240
241/* Define to the one symbol short name of this package. */
242#define PACKAGE_TARNAME "pcre"
243
244/* Define to the home page for this package. */
245#define PACKAGE_URL ""
246
247/* Define to the version of this package. */
248#define PACKAGE_VERSION "8.36"
249
250/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
251   parentheses (of any kind) in a pattern. This limits the amount of system
252   stack that is used while compiling a pattern. */
253#ifndef PARENS_NEST_LIMIT
254#define PARENS_NEST_LIMIT 250
255#endif
256
257/* The value of PCREGREP_BUFSIZE determines the size of buffer used by
258   pcregrep to hold parts of the file it is searching. This is also the
259   minimum value. The actual amount of memory used by pcregrep is three times
260   this number, because it allows for the buffering of "before" and "after"
261   lines. */
262#ifndef PCREGREP_BUFSIZE
263#define PCREGREP_BUFSIZE 20480
264#endif
265
266/* If you are compiling for a system other than a Unix-like system or
267   Win32, and it needs some magic to be inserted before the definition
268   of a function that is exported by the library, define this macro to
269   contain the relevant magic. If you do not define this macro, a suitable
270    __declspec value is used for Windows systems; in other environments
271   "extern" is used for a C compiler and "extern C" for a C++ compiler.
272   This macro apears at the start of every exported function that is part
273   of the external API. It does not appear on functions that are "external"
274   in the C sense, but which are internal to the library. */
275/* #undef PCRE_EXP_DEFN */
276
277/* Define to any value if linking statically (TODO: make nice with Libtool) */
278/* #undef PCRE_STATIC */
279
280/* When calling PCRE via the POSIX interface, additional working storage is
281   required for holding the pointers to capturing substrings because PCRE
282   requires three integers per substring, whereas the POSIX interface provides
283   only two. If the number of expected substrings is small, the wrapper
284   function uses space on the stack, because this is faster than using
285   malloc() for each call. The threshold above which the stack is no longer
286   used is defined by POSIX_MALLOC_THRESHOLD. */
287#ifndef POSIX_MALLOC_THRESHOLD
288#define POSIX_MALLOC_THRESHOLD 10
289#endif
290
291/* Define to necessary symbol if this constant uses a non-standard name on
292   your system. */
293/* #undef PTHREAD_CREATE_JOINABLE */
294
295/* Define to 1 if you have the ANSI C header files. */
296/* #undef STDC_HEADERS */
297
298/* Define to any value to enable support for Just-In-Time compiling. */
299/* #undef SUPPORT_JIT */
300
301/* Define to any value to allow pcregrep to be linked with libbz2, so that it
302   is able to handle .bz2 files. */
303/* #undef SUPPORT_LIBBZ2 */
304
305/* Define to any value to allow pcretest to be linked with libedit. */
306/* #undef SUPPORT_LIBEDIT */
307
308/* Define to any value to allow pcretest to be linked with libreadline. */
309/* #undef SUPPORT_LIBREADLINE */
310
311/* Define to any value to allow pcregrep to be linked with libz, so that it is
312   able to handle .gz files. */
313/* #undef SUPPORT_LIBZ */
314
315/* Define to any value to enable the 16 bit PCRE library. */
316/* #undef SUPPORT_PCRE16 */
317
318/* Define to any value to enable the 32 bit PCRE library. */
319/* #undef SUPPORT_PCRE32 */
320
321/* Define to any value to enable the 8 bit PCRE library. */
322/* #undef SUPPORT_PCRE8 */
323
324/* Define to any value to enable JIT support in pcregrep. */
325/* #undef SUPPORT_PCREGREP_JIT */
326
327/* Define to any value to enable support for Unicode properties. */
328/* #undef SUPPORT_UCP */
329
330/* Define to any value to enable support for the UTF-8/16/32 Unicode encoding.
331   This will work even in an EBCDIC environment, but it is incompatible with
332   the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or*
333   ASCII/UTF-8/16/32, but not both at once. */
334/* #undef SUPPORT_UTF */
335
336/* Define to any value for valgrind support to find invalid memory reads. */
337/* #undef SUPPORT_VALGRIND */
338
339/* Version number of package */
340#define VERSION "8.36"
341
342/* Define to empty if `const' does not conform to ANSI C. */
343/* #undef const */
344
345/* Define to the type of a signed integer type of width exactly 64 bits if
346   such a type exists and the standard includes do not define it. */
347/* #undef int64_t */
348
349/* Define to `unsigned int' if <sys/types.h> does not define. */
350/* #undef size_t */
351