1/***************************************************************************/ 2/* */ 3/* ftmoderr.h */ 4/* */ 5/* FreeType module error offsets (specification). */ 6/* */ 7/* Copyright 2001-2005, 2010, 2013 by */ 8/* David Turner, Robert Wilhelm, and Werner Lemberg. */ 9/* */ 10/* This file is part of the FreeType project, and may only be used, */ 11/* modified, and distributed under the terms of the FreeType project */ 12/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ 13/* this file you indicate that you have read the license and */ 14/* understand and accept it fully. */ 15/* */ 16/***************************************************************************/ 17 18 19 /*************************************************************************/ 20 /* */ 21 /* This file is used to define the FreeType module error codes. */ 22 /* */ 23 /* If the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in `ftoption.h' is */ 24 /* set, the lower byte of an error value identifies the error code as */ 25 /* usual. In addition, the higher byte identifies the module. For */ 26 /* example, the error `FT_Err_Invalid_File_Format' has value 0x0003, the */ 27 /* error `TT_Err_Invalid_File_Format' has value 0x1303, the error */ 28 /* `T1_Err_Invalid_File_Format' has value 0x1403, etc. */ 29 /* */ 30 /* Note that `FT_Err_Ok', `TT_Err_Ok', etc. are always equal to zero, */ 31 /* including the high byte. */ 32 /* */ 33 /* If FT_CONFIG_OPTION_USE_MODULE_ERRORS isn't set, the higher byte of */ 34 /* an error value is set to zero. */ 35 /* */ 36 /* To hide the various `XXX_Err_' prefixes in the source code, FreeType */ 37 /* provides some macros in `fttypes.h'. */ 38 /* */ 39 /* FT_ERR( err ) */ 40 /* Add current error module prefix (as defined with the */ 41 /* `FT_ERR_PREFIX' macro) to `err'. For example, in the BDF module */ 42 /* the line */ 43 /* */ 44 /* error = FT_ERR( Invalid_Outline ); */ 45 /* */ 46 /* expands to */ 47 /* */ 48 /* error = BDF_Err_Invalid_Outline; */ 49 /* */ 50 /* For simplicity, you can always use `FT_Err_Ok' directly instead */ 51 /* of `FT_ERR( Ok )'. */ 52 /* */ 53 /* FT_ERR_EQ( errcode, err ) */ 54 /* FT_ERR_NEQ( errcode, err ) */ 55 /* Compare error code `errcode' with the error `err' for equality */ 56 /* and inequality, respectively. Example: */ 57 /* */ 58 /* if ( FT_ERR_EQ( error, Invalid_Outline ) ) */ 59 /* ... */ 60 /* */ 61 /* Using this macro you don't have to think about error prefixes. */ 62 /* Of course, if module errors are not active, the above example is */ 63 /* the same as */ 64 /* */ 65 /* if ( error == FT_Err_Invalid_Outline ) */ 66 /* ... */ 67 /* */ 68 /* FT_ERROR_BASE( errcode ) */ 69 /* FT_ERROR_MODULE( errcode ) */ 70 /* Get base error and module error code, respectively. */ 71 /* */ 72 /* */ 73 /* It can also be used to create a module error message table easily */ 74 /* with something like */ 75 /* */ 76 /* { */ 77 /* #undef __FTMODERR_H__ */ 78 /* #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, */ 79 /* #define FT_MODERR_START_LIST { */ 80 /* #define FT_MODERR_END_LIST { 0, 0 } }; */ 81 /* */ 82 /* const struct */ 83 /* { */ 84 /* int mod_err_offset; */ 85 /* const char* mod_err_msg */ 86 /* } ft_mod_errors[] = */ 87 /* */ 88 /* #include "ftmoderr.h" */ 89 /* } */ 90 /* */ 91 /*************************************************************************/ 92 93 94#ifndef __FTMODERR_H__ 95#define __FTMODERR_H__ 96 97 98 /*******************************************************************/ 99 /*******************************************************************/ 100 /***** *****/ 101 /***** SETUP MACROS *****/ 102 /***** *****/ 103 /*******************************************************************/ 104 /*******************************************************************/ 105 106 107#undef FT_NEED_EXTERN_C 108 109#ifndef FT_MODERRDEF 110 111#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS 112#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v, 113#else 114#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0, 115#endif 116 117#define FT_MODERR_START_LIST enum { 118#define FT_MODERR_END_LIST FT_Mod_Err_Max }; 119 120#ifdef __cplusplus 121#define FT_NEED_EXTERN_C 122 extern "C" { 123#endif 124 125#endif /* !FT_MODERRDEF */ 126 127 128 /*******************************************************************/ 129 /*******************************************************************/ 130 /***** *****/ 131 /***** LIST MODULE ERROR BASES *****/ 132 /***** *****/ 133 /*******************************************************************/ 134 /*******************************************************************/ 135 136 137#ifdef FT_MODERR_START_LIST 138 FT_MODERR_START_LIST 139#endif 140 141 142 FT_MODERRDEF( Base, 0x000, "base module" ) 143 FT_MODERRDEF( Autofit, 0x100, "autofitter module" ) 144 FT_MODERRDEF( BDF, 0x200, "BDF module" ) 145 FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" ) 146 FT_MODERRDEF( Cache, 0x400, "cache module" ) 147 FT_MODERRDEF( CFF, 0x500, "CFF module" ) 148 FT_MODERRDEF( CID, 0x600, "CID module" ) 149 FT_MODERRDEF( Gzip, 0x700, "Gzip module" ) 150 FT_MODERRDEF( LZW, 0x800, "LZW module" ) 151 FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" ) 152 FT_MODERRDEF( PCF, 0xA00, "PCF module" ) 153 FT_MODERRDEF( PFR, 0xB00, "PFR module" ) 154 FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" ) 155 FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" ) 156 FT_MODERRDEF( PSnames, 0xE00, "PS names module" ) 157 FT_MODERRDEF( Raster, 0xF00, "raster module" ) 158 FT_MODERRDEF( SFNT, 0x1000, "SFNT module" ) 159 FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" ) 160 FT_MODERRDEF( TrueType, 0x1200, "TrueType module" ) 161 FT_MODERRDEF( Type1, 0x1300, "Type 1 module" ) 162 FT_MODERRDEF( Type42, 0x1400, "Type 42 module" ) 163 FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" ) 164 FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" ) 165 166 167#ifdef FT_MODERR_END_LIST 168 FT_MODERR_END_LIST 169#endif 170 171 172 /*******************************************************************/ 173 /*******************************************************************/ 174 /***** *****/ 175 /***** CLEANUP *****/ 176 /***** *****/ 177 /*******************************************************************/ 178 /*******************************************************************/ 179 180 181#ifdef FT_NEED_EXTERN_C 182 } 183#endif 184 185#undef FT_MODERR_START_LIST 186#undef FT_MODERR_END_LIST 187#undef FT_MODERRDEF 188#undef FT_NEED_EXTERN_C 189 190 191#endif /* __FTMODERR_H__ */ 192 193 194/* END */ 195