1# Sample udhcpd configuration file (/etc/udhcpd.conf)
2
3# The start and end of the IP lease block
4
5start 		192.168.42.20	#default: 192.168.0.20
6end		192.168.42.254	#default: 192.168.0.254
7
8
9# The interface that udhcpd will use
10
11interface	wlan2		#default: eth0
12
13
14# The maximim number of leases (includes addressesd reserved
15# by OFFER's, DECLINE's, and ARP conficts
16
17#max_leases	254		#default: 254
18
19
20# If remaining is true (default), udhcpd will store the time
21# remaining for each lease in the udhcpd leases file. This is
22# for embedded systems that cannot keep time between reboots.
23# If you set remaining to no, the absolute time that the lease
24# expires at will be stored in the dhcpd.leases file.
25
26#remaining	yes		#default: yes
27
28
29# The time period at which udhcpd will write out a dhcpd.leases
30# file. If this is 0, udhcpd will never automatically write a
31# lease file. (specified in seconds)
32
33#auto_time	7200		#default: 7200 (2 hours)
34
35
36# The amount of time that an IP will be reserved (leased) for if a
37# DHCP decline message is received (seconds).
38
39#decline_time	3600		#default: 3600 (1 hour)
40
41
42# The amount of time that an IP will be reserved (leased) for if an
43# ARP conflct occurs. (seconds
44
45#conflict_time	3600		#default: 3600 (1 hour)
46
47
48# How long an offered address is reserved (leased) in seconds
49
50#offer_time	60		#default: 60 (1 minute)
51
52# If a lease to be given is below this value, the full lease time is
53# instead used (seconds).
54
55#min_lease	60		#defult: 60
56
57
58# The location of the leases file
59
60#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
61
62# The location of the pid file
63pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid
64
65# Every time udhcpd writes a leases file, the below script will be called.
66# Useful for writing the lease file to flash every few hours.
67
68#notify_file				#default: (no script)
69
70#notify_file	dumpleases 	# <--- useful for debugging
71
72# The following are bootp specific options, setable by udhcpd.
73
74#siaddr		192.168.0.22		#default: 0.0.0.0
75
76#sname		zorak			#default: (none)
77
78#boot_file	/var/nfs_root		#default: (none)
79
80# The remainer of options are DHCP options and can be specifed with the
81# keyword 'opt' or 'option'. If an option can take multiple items, such
82# as the dns option, they can be listed on the same line, or multiple
83# lines. The only option with a default is 'lease'.
84
85#Examles
86opt	dns	192.168.2.1
87option	subnet	255.255.255.0
88option	domain	atherosowl.com
89option	lease	864000		# 10 days of seconds
90
91
92# Currently supported options, for more info, see options.c
93#opt subnet
94#opt timezone
95#opt router
96#opt timesvr
97#opt namesvr
98#opt dns
99#opt logsvr
100#opt cookiesvr
101#opt lprsvr
102#opt bootsize
103#opt domain
104#opt swapsvr
105#opt rootpath
106#opt ipttl
107#opt mtu
108#opt broadcast
109#opt wins
110#opt lease
111#opt ntpsrv
112#opt tftp
113#opt bootfile
114
115
116# Static leases map
117#static_lease 00:60:08:11:CE:4E 192.168.0.54
118#static_lease 00:60:08:11:CE:3E 192.168.0.44
119
120
121