| 60712080d834941754dca8d34adac6bd355318ea |
|
03-Jul-2014 |
Raj Kamal <rkamal@codeaurora.org> |
Revert "Set priority among various display devices"
* This reverts commit 52b4fdbdbd4b935c48164542cdd1f4a1292cb08a.
* Since DisplayDevices are not created for non-wfd virtual
displays(CTS/SR/SSD) anymore, we can remove these checks.
Change-Id: I9249a70c6d6f6b42f268e6ec8a28c0a86b954c4e
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| c5628e5e5d07912ad30849801f18c07ab433a4f5 |
|
30-Jun-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc/overlay: Get rot dest dimensions instead of manipulating source
Currently for Mdss rotator we manipulate the layer buffer dimensions
to be equal to what rotator's destination dimensions would be, so that
these could be fed to MDP. Instead, this patch introduces APIs in
rotator so that hwc can directly query destination crop, width, height,
format from rotator.
This also simplifies the updateSource() and configRotator() helpers.
Change-Id: I501d998f2e0574683c764af9422742b2426ba0c7
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 5470587fb130854eb11a110b45d951883391e356 |
|
23-Jun-2014 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: initialize viewFrame for primary display
viewFrame for primary display will always be full screen, hence
initialize it to primary resolution
Change-Id: I0f6ce79a9af6eac9b7b8a684c5b690c8b4a9e760
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 392015f27bf5930ccb8b2c8955b28c2137b4c65b |
|
03-Jun-2014 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Extend PTOR feature for two layers
- Consider two smallest layers for PTOR feature which uses MDP comp.
- These two layers are rendered on a buffer and are queued to MDP
to acheive full MDP Composition
- This helps to acheive performance enhancement
Change-Id: I43d9306ff19cd2d7a410c885316523965a44cbd4
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 8636d6ec09a6886169903d2f4de259fac8bfcdfd |
|
07-Jun-2014 |
Tatenda Chipeperekwa <tatendac@codeaurora.org> |
hwc: Close release fence fd on buf sync ioctl failure
This change closes the release fence fd in the event that
a failure occurs during the buf sync ioctl. This is additional
sanity to ensure that we are not leaking any fd's in userspace.
Change-Id: Ic303aa2a2ed20244605b0f0bd91145e8f3fc8f1b
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| cfb968873b9e94dca883aadabee42b01558faea9 |
|
15-Jun-2014 |
Shalaj Jain <shalajj@codeaurora.org> |
display: remove compiler warnings
Use correct typecasts and format specifiers and resolve
compiler warnings
Change-Id: I51b12ecb78a9a496cf1f76c3d32892a203f70c43
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 74e109a6891def0f55250476bc28aa2098027606 |
|
18-Jun-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc/overlay: Fix decimation / bwc bugs
1) While setting BWC check for 90 transform and swap crop
2) Calculate decimation in the getDecimationFactor API itself.
Currently, a residual downscale is calculated and the clients have
to take logs and apply forcible decimation like in MdpCtrl
3) Fix bug where transform gets typecasted to bool
b/14225977
Change-Id: I3c99c571e02e2cf7822342516b6a87d97be553d1
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 4a7fde21bc0dea152a633521d727dda7d540f262 |
|
16-Nov-2013 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Rotate RGB layer using MDP Rotator
1. Use MDP rotator to rotate RGB layers which are rendered by software
2. Restrict total number of rotator sessions to 4 for all displays
3. Disable RGB layer rotation for all MDP versions < MDP5
Change-Id: Ie93111082dff9a16b614e9768df5d8ce83ff9e25
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 33f1ae81779c5b897987245cde0f498fd6192579 |
|
20-May-2014 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Define binder interface to set view frame of a display
Define binder interface setViewFrame to set view frame information
of a display by surfaceflinger when projection for that display
changes.
Change-Id: If737b51ae0f04303a1a29c91a9703f64354b61fb
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 63cdccf247d3d0ac16f19f8f7bd1e3da5d7267d1 |
|
29-May-2014 |
Tatenda Chipeperekwa <tatendac@codeaurora.org> |
hwc: vds: Add support to dump layers, FB and WB output buffer
1. Add hook to dump the layers going to VDS based virtual display.
2. Furthermore, add utility function to dump the frame buffer and
WB output buffer. This will be enabled via a system property
debug.hwc.enable_vds_dump
Once dumping is enabled, the dumps can be extracted from
/data/vds.fb.FORMAT.XRESxYRES.raw
/data/vds.wb.FORMAT.XRESxYRES.raw
e.g. vds.fb.MDP_RGBA_8888.1152x1920.raw
Change-Id: I2435c5507961a52929411206892c005492d5c193
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 4a00e758321e1561b13817aaee07ea43ccaad3e9 |
|
06-Jun-2014 |
Praveena Pachipulusu <pveena@codeaurora.org> |
hwc: Calculate DPI values according to changed resolution
If dynamic FB feature is enabled, calculate xdpi, ydpi
values based on new resolution.
Change-Id: Icbc8d2161082f60983532d1a57d9142653c65e9a
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 3b66cc8c40ba690452f2ea5f648b408d0164c423 |
|
29-May-2014 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Set GPU Hint from idlefallback state to GPU
Set the GPU hint to high from idlefallback to GPU state transition.
Change-Id: Ia8c2e44788e7131c4faf5fda32acf0c5b6000cdd
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 1cf3c09dd3d06292982002565a80d09138a358a8 |
|
31-May-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Consider FLIP flags for partial update.
FLIP flags need to be considered while calculating srcCrop and
displayFrame even when a layer is updated partially on dual DSI
panels.
Change-Id: I097b3335e66566d6639848bc8f8382bfeabb7f54
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 80cd536400045e5625ed89af9b297800d69d7b89 |
|
14-May-2014 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
hwc: Full MDP Composition mode with overlap region removal
MDP bandwidth limitations can be avoided, if the overlapping region
covered by the smallest layer at a higher z-order, can be composed
on a render buffer using Copybit, and then it can be queued to MDP
along with other layers. It helps to improve performace by avoiding
GPU Composition in use cases like Home Screen pan. To enable this
feature, set system prop "persist.hwc.ptor.enable" to "true" or '1'
and enable Copybit HAL compilation.
Change-Id: Ib719d3dd42477837519518cc427f1b95356c28f7
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| c5936f35d42001585865d95d6824de521630ff73 |
|
16-Apr-2014 |
Ramakant Singh <ramaka@codeaurora.org> |
hwc : Add support for ABC in MDP3
In display list if one layer has same parameters
as framebuffer on index '0'. Use this layer
as FB and blit other layer(s) on top of it.
Change-Id: If38712781f24a2e27686d2b370643f51a9b05358
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| bd51df0d51c9342f705caeea9c245b919dedb120 |
|
28-Mar-2014 |
Ramakant Singh <ramaka@codeaurora.org> |
hwc : Add support for single layer Bypass in MDP3
If the display list contains single layer and that layer
has same properties as Frame Buffer, avoid BLIT on Frame buffer
and pass it directly to display.
Change-Id: I24decaca4788432a55b550caa2a1354a670cd6fa
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 5bbc98fa2dcc744a1943cc8c85ce74169fc8a044 |
|
08-May-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Map dirtyRect to layer destination before using.
DirtyRect for a layer is generated w.r.t to its buffer
coordinates. It needs to be mapped for layer destination
(display) coordinates before using it to calculate the frame's
ROI.
Change-Id: Id86f495b2016da2cfd5aed4d86bff6d3035abf10
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 6f7634666209698e4835b9f326278a7068834383 |
|
18-Nov-2013 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Extend partial frame update for split displays
Extends partial frame update support for split displays by calculating
changing region(ROI) independently for each half of the screen. In case of
only one half updating, display driver shuts down the DSI/MDP mixer control
of the non updating half.
Maintains two ROI's for each display. In case of Non-split
displays, only left ROI is updated.
Change-Id: I8a67fe40aac665a48b6f8a46beffb9f8027851b2
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| f2cd42c336f41ca3184c0dc5942fec285a227b81 |
|
05-May-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: Fix tearing with RGB layer rotation
Pass the acquire fence count to driver on a buffer sync ioctl call
for the rotator. The count is always 1 since the ioctl is called
once per rotator session. This also means that the rotator has to
wait for only 1 layer always.
The earlier assumption that in the presence of a session id, the
acquire count would be NOP, does not seem to hold with the driver.
Change-Id: I986a436194c66e8ce2a2afb363627f72dc6e20cd
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 2c4de320db5ba9e92cfaa5a7fd67487cec0f26dc |
|
25-Mar-2014 |
Dileep Kumar Reddi <dkumarre@codeaurora.org> |
HWC: Update DisplayFrame of all layers properly in Dynamic FB
Use change in HWC_GEOMETRY_CHANGED flag appropriately to avoid
redundant and unintentional overwrites of DisplayFrame values,
which may result fall back to GPU.
Change-Id: Ifb0f8dc5d356c965b6e80644f32392c460fb1ae7
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 4418482cd51e8343e7efd978ccdd17c616d1d78a |
|
14-Apr-2014 |
Raj Kamal <rkamal@codeaurora.org> |
hwc: Add target specific checks in hwcomposer
* Mdss driver supports DMA-Multiplexing on wb interface
for certain targets. Add overlay get function to query
this info during pipe allocation for wb.
* UI Scaling on external is not supported on certain
targets due to the lack of availability of pipes with
scalars. Add overlay get function to query this info
to disable action-safe calcs, DRC and others which
require downscaling.
Change-Id: I1726caa4634f72d781561e797078648524ea2eef
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| c5ee4bd551fd15825770154947920733949f8811 |
|
27-Feb-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Use layer dirty rect to calculate frame's updating ROI
Use layer dirty rect instead of display frame to calculate frame's ROI.
Change-Id: If5fe93da7815efdf9b44ed683a4d80b397921cf1
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| b126ad667c4b58794f6a8ab68e5439242117ba72 |
|
10-Apr-2014 |
Raj Kamal <rkamal@codeaurora.org> |
hwc: Set DMA state at the start of composition
* Set DMA state at the start of the composition cycle
based on the following.
Set it to LINE_MODE if the number of active rotator
sessions are 0.
Set it to BLOCK_MODE if
** A yuv-layer for any display-device requires rotation
** (or) mExtOrientation is set
** (or) mBufferMirrorMode is set
* Separate out the reset helper function into more
modular ones
Change-Id: I6a22ac4379565cd1fd2d875a7a417f4ed3ee0f1e
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| f2ecc8f4b92739fcb1a75089f8fe01db1f178adb |
|
07-Mar-2014 |
Ramakant Singh <ramaka@codeaurora.org> |
HWC/Copybit :: Add swap rect feature in HAL for MDP3
We brings all swap rect level checks in HAL from surfaceflinger
for MDP3.
swap rect kicks in case of
1 Only one layer is updating.
2 No overlaypping layers.
3.Both src and dst has same value.(no scaling)
4.No video layer
Change-Id: I881958994e80b53d4969beaaf51518b727a8de78
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| a2b25afe2813c793161cc9fad657d9638e88aec4 |
|
01-Apr-2014 |
Raj kamal <rkamal@codeaurora.org> |
Display and wfd synchronization during teardown
* Provide a binder interface call for wfd module
to inform display about the start/stop/pause/resume
of wfd session.
* This is needed for wfd-hdmi synchronization in
case of v4l2 wfd solution. If hdmi is plugged
in during v4l2 wfd session, display-hal waits in
uevent thread for wfd teardown notification from
wfd module, before going ahead with configuring
external display.
* For VDS WFD solution, display-hal waits in uevent
thread for wfd-teardown to be signalled from
the composition thread.
Change-Id: I9514cb5bc7ff81de0b5dd4cdf66d8286a64ba094
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| e36c30ff5f33bbe31675d784d2e85a2f2c6a8fcd |
|
09-Apr-2014 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
hwc: Display view frame needs to be set before using it.
The display view frame needs to be set before calling trimLayer api
because it uses view frame to find the scissor for display, which is
used to clip crop for out-of-bounds display frame sent by framework.
If mViewFrame is not set, scissor will be empty rect, which leads to
wrong source crop calculation.
Change-Id: I52ad4eb9037d34aff24c30fe65e3793684445264
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| db307bbb483b94b941ef8e66aa745fc13af906c3 |
|
29-Mar-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: featurize using QCOM_BSP
- Use QCOM_BSP for HWC_BLIT and GPUHint features
- These are not avaliable on all platforms
Conflicts:
msm8226/libhwcomposer/hwc_copybit.cpp
msm8226/libhwcomposer/hwc_utils.cpp
Change-Id: Ied0c60246093c868ac708f2f8897f08cec1e8878
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| ebf925e696ac4debee9ed652aea5ba2a21dfa136 |
|
31-Mar-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: Add rotator obj to layer-rot-map if acquired.
Add rotator obj to the layer-rot-map soon after its successfully
acquired. This makes sure that any object allocated is accounted
for, irrespective of whether rotator configuration succeeds or not.
Change-Id: I94102d9c607cf61b2eccdf7f2445bb07d309d35c
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 4217cbfc47f3b4f8f0436e3953cf169f7f18a506 |
|
17-Feb-2014 |
Praveena Pachipulusu <pveena@codeaurora.org> |
hwc: Use proper typecasts.
- Remove compiler warnings
- Use proper typecasts
Change-Id: I7391f32ae31283239f5cebb93b02f3ce3a5c99f3
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 5fc9bd2a980bd3dda48564b471acd29c7f53b097 |
|
24-Mar-2014 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Fix for HDMI video playback out of boundary in portrait
Fix for out of boundary video playback issue on HDMI where HDMI
resolution is lower than primary resolution.
Change-Id: I4271471cda87e1e3d3805ace8b8723a91979a160
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 2d4d00adfcf5cfae694778eed8b72791148dc23f |
|
21-Mar-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
h/q/d: Invoke padding when DMA is not availble for ext rotator.
This change invokes padding round when DMA is used in line mode
and rotator is needed for external display.
Change-Id: I1fef1a988d96695748d79d23b7927844eea237fe
CRs-Fixed: 632069
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 3a21e54387a2b98a15611231e90600aa048a4ddd |
|
29-Mar-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: featurize using QCOM_BSP
- Use QCOM_BSP for HWC_BLIT and GPUHint features
- These are not avaliable on all platforms
Change-Id: Ied0c60246093c868ac708f2f8897f08cec1e8878
Conflicts:
msm8226/libhwcomposer/hwc_copybit.cpp
msm8226/libhwcomposer/hwc_utils.cpp
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 1b0c2f1b1c7201502f75c12131e3bc54f92d60ea |
|
15-Mar-2014 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Set GPU performance hint.
1. Set the GPU hint flag to high for MIXED/GPU composition only for
first frame after MDP to GPU/MIXED mode transition.
2. Set the GPU hint to default if the current composition type is GPU
due to idle fallback or MDP composition.
Change-Id: I208a778017435a5a4620142da9d9fb3c50e09155
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 201e4c9a80c1adb32ac8271a95721aa838c4d9fe |
|
05-Mar-2014 |
Naseer Ahmed <naseer@codeaurora.org> |
display: Remove VPU related code
Targets in which VPU interacts with display through HWC are no
longer supported.
Change-Id: I65a5348a375ad0c193a8659d0cdfb37c2db6f38e
Conflicts:
msm8226/libhwcomposer/hwc_utils.cpp
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 6a9d12360acf2c27c5ca4b4b58ae45c56284b29f |
|
06-Mar-2014 |
Dileep Kumar Reddi <dkumarre@codeaurora.org> |
HWC: Use proper typecast to avoid scaling issues
Multiplying double with integer may scale up/down original value.
Change-Id: I2aa002a434d287df69d34de7e4fea3d56bcfbfaa
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 1b9f24cfc5be6361faeb28976d720cf65a7f8285 |
|
05-Mar-2014 |
Tatenda Chipeperekwa <tatendac@codeaurora.org> |
hwc: Move aspect ratio helper function to qdutils
Move aspect ratio helper function to qdutils so it can be used
as a utility function in libvirtual and libexternal without
introducing a circular dependency.
Change-Id: Ib295c1d9f78bc8898b1aac9a443cdacf53150551
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 09b70dd517a147dfb0e7829a08f2a288682a78fb |
|
03-Mar-2014 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
hwc: Disable Actionsafe for 8974 target and non-HDMI display.
1. Disable Action safe for 8974 due to HW limitation while downscaling
layers with overlapped region
2. Disable Actionsafe for non HDMI displays.
Change-Id: If974cf2bb2259ee6051645698ba641791b1425ce
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 57ca59ccafa0efa6fb8f5684e90777bbeb6f92c7 |
|
21-Feb-2014 |
Tatenda Chipeperekwa <tatendac@codeaurora.org> |
hwc: Enable downscale feature through system property
Add support to turn the MDP downscale feature ON through the
use of a system property. 'sys.hwc.mdp_downscale_enabled' shall be
set to 'true' in build.prop file to enable this functionality.
This is required for OEMs that might have privacy concerns over panel
size information being exposed.
Change-Id: I354b25b1fdabe5786aed7552f2afccda35412467
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 897c435dd90f4d2513d2b230caf4a18cc970263f |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "display: msm8226: remove support for HWC_BLIT""
This reverts commit 9ed3d94390e8cc1cef1ef548f3ac335abc203333.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| a653efede03423aa840da24634f1ec6f20796f1e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224""
This reverts commit 90268aeae4a80fdce99db4a4e45d696afd4fff36.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| ef53c1c84ec55ed50f607d52b7abfbb86239408e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "split msm8x26 and msm8x74 display HALs apart""
This reverts commit 13236c4d3582dd6f7185a303c4795ea611edbfe3.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 13236c4d3582dd6f7185a303c4795ea611edbfe3 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "split msm8x26 and msm8x74 display HALs apart"
This reverts commit 32d546383b4424a954987570731f7fa216bce206.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 90268aeae4a80fdce99db4a4e45d696afd4fff36 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224"
This reverts commit f96e0b957a215582702db2a5ec6c744afd94eae3.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 9ed3d94390e8cc1cef1ef548f3ac335abc203333 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "display: msm8226: remove support for HWC_BLIT"
This reverts commit 3aaeaafa802d65ff1da24906d518185ebad8c1d1.
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 3aaeaafa802d65ff1da24906d518185ebad8c1d1 |
|
01-Apr-2014 |
Iliyan Malchev <malchev@google.com> |
display: msm8226: remove support for HWC_BLIT
Change-Id: I0049b2c000f5f2f2bc9045c655262ad2f92e6a7f
Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| f96e0b957a215582702db2a5ec6c744afd94eae3 |
|
28-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224
Change-Id: Ia9af631171fb9ec64de1d1cb0ddf5be3e0fe9132
Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|
| 32d546383b4424a954987570731f7fa216bce206 |
|
18-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
split msm8x26 and msm8x74 display HALs apart
Change-Id: I58a7dc129faa6eef4f7cdc8ee09fd42cd86c189b
Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libhwcomposer/hwc_utils.cpp
|