| 8a5179466a142172a6f24f5d815c622541b3f61f |
|
22-Feb-2010 |
Wolfgang Grandegger <wg@grandegger.com> |
iproute2: netlink support for bus-error reporting and counters
This patch uses the new features of the kernel's netlink CAN interface
making the bus-error reporting configurable and allowing to retrieve
the CAN TX and RX bus error counters via netlink interface. Here is the
output of my test session showing how to use them:
# ip link set can0 up type can bitrate 500000 berr-reporting on
# ip -d -s link show can0
2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN qlen 10
link/can
can <BERR-REPORTING> state ERROR-PASSIVE (berr-counter tx 128 rx 0) restart-ms 0
CAN bus error counter values ^^^^^^^^^^^
bitrate 500000 sample-point 0.875
tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
clock 8000000
re-started bus-errors arbit-lost error-warn error-pass bus-off
0 54101 0 1 1 0
RX: bytes packets errors dropped overrun mcast
432808 54101 54101 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
# ifconfig can0 down
# ip link set can0 up type can berr-reporting off
# candump -t d any,0:0,#FFFFFFFF
(0.000000) can0 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
(0.000474) can0 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
^^ ^^
\ \___ rxerr
\_____ txerr
Furthermore, the missing support for one-shot mode has been added.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
/external/iproute2/ip/iplink_can.c
|