History log of /external/lldb/source/Commands/CommandObjectRegister.cpp
Revision Date Author Comments (<<< Hide modified files) (Show modified files >>>)
0852cbb9660c92a448468a8ec7c39fb7245eca57 28-Mar-2013 Ashok Thirumurthi <ashok.thirumurthi@intel.com> Introduces extended register sets whose availability can vary with the target processor.
- Includes a stub for AVX support in the x86-64 register context and a failing test for register sets that are unavailable.

Thanks to Greg Clayton for his review feedback.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178252 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
731493d11e161ef5679319adcaa3b69ad71e3338 26-Mar-2013 Enrico Granata <egranata@apple.com> <rdar://problem/13221060>

Make register read and write accept $<regname> as valid.
This allows:
(lldb) reg read rbx
rbx = 0x0000000000000000
(lldb) reg read $rbx
rbx = 0x0000000000000000
(lldb) reg write $rbx 1
(lldb) reg read $rbx
rbx = 0x0000000000000001

to function correctly

It is not done at the RegisterContext level because we should keep the internal API clean of this user-friendly behavior and name registers appropriately.
If this ends up being needed in more places we can reconsider.

git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@177961 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
36da2aa6dc5ad9994b638ed09eb81c44cc05540b 25-Jan-2013 Greg Clayton <gclayton@apple.com> <rdar://problem/13069948>

Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.

So I defined a new "lldb::offset_t" which should be used for all file offsets.

After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.

Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173463 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
ea0bb4d45c14447a2fe9be9f4bd8e79a84513537 09-Jan-2013 Greg Clayton <gclayton@apple.com> Expanded the flags that can be set for a command object in lldb_private::CommandObject. This list of available flags are:

enum
{
//----------------------------------------------------------------------
// eFlagRequiresTarget
//
// Ensures a valid target is contained in m_exe_ctx prior to executing
// the command. If a target doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidTargetDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidTargetDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresTarget = (1u << 0),
//----------------------------------------------------------------------
// eFlagRequiresProcess
//
// Ensures a valid process is contained in m_exe_ctx prior to executing
// the command. If a process doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidProcessDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidProcessDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresProcess = (1u << 1),
//----------------------------------------------------------------------
// eFlagRequiresThread
//
// Ensures a valid thread is contained in m_exe_ctx prior to executing
// the command. If a thread doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidThreadDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidThreadDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresThread = (1u << 2),
//----------------------------------------------------------------------
// eFlagRequiresFrame
//
// Ensures a valid frame is contained in m_exe_ctx prior to executing
// the command. If a frame doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidFrameDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidFrameDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresFrame = (1u << 3),
//----------------------------------------------------------------------
// eFlagRequiresRegContext
//
// Ensures a valid register context (from the selected frame if there
// is a frame in m_exe_ctx, or from the selected thread from m_exe_ctx)
// is availble from m_exe_ctx prior to executing the command. If a
// target doesn't exist or is invalid, the command will fail and
// CommandObject::GetInvalidRegContextDescription() will be returned as
// the error. CommandObject subclasses can override the virtual function
// for GetInvalidRegContextDescription() to provide custom strings when
// needed.
//----------------------------------------------------------------------
eFlagRequiresRegContext = (1u << 4),
//----------------------------------------------------------------------
// eFlagTryTargetAPILock
//
// Attempts to acquire the target lock if a target is selected in the
// command interpreter. If the command object fails to acquire the API
// lock, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagTryTargetAPILock = (1u << 5),
//----------------------------------------------------------------------
// eFlagProcessMustBeLaunched
//
// Verifies that there is a launched process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBeLaunched = (1u << 6),
//----------------------------------------------------------------------
// eFlagProcessMustBePaused
//
// Verifies that there is a paused process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBePaused = (1u << 7)
};

Now each command object contains a "ExecutionContext m_exe_ctx;" member variable that gets initialized prior to running the command. The validity of the target objects in m_exe_ctx are checked to ensure that any target/process/thread/frame/reg context that are required are valid prior to executing the command. Each command object also contains a Mutex::Locker m_api_locker which gets used if eFlagTryTargetAPILock is set. This centralizes a lot of checking code that was previously and inconsistently implemented across many commands.




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@171990 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
d891f9b872103235cfd2ed452c6f14a4394d9b3a 05-Dec-2012 Daniel Malea <daniel.malea@intel.com> Fix Linux build warnings due to redefinition of macros:
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)

Patch by Matt Kopec!




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169341 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
6475c42148a8ea1ca86e5db465db7eca742d897d 04-Dec-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/12798131>

Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.

This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169189 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
73844aa19a7360b662e2be710fc3c969d6c86606 22-Aug-2012 Greg Clayton <gclayton@apple.com> Reimplemented the code that backed the "settings" in lldb. There were many issues with the previous implementation:
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads

Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@162366 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
da26bd203cbb104291b39891febf7481794f205f 08-Jun-2012 Jim Ingham <jingham@apple.com> Make raw & parsed commands subclasses of CommandObject rather than having the raw version implement an
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.

Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.

Made the CommandObject flags work for raw as well as parsed commands.

Made "expr" use the flags so that it requires you to be paused to run "expr".



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158235 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
9d0f5082c651aca3e828ccf64fbf84c1bccd54f7 06-Jun-2012 Johnny Chen <johnny.chen@apple.com> rdar://problem/11598332

The output of 'register read' should be prettier.
Modify RegisterValue::Dump() to take an additional parameter:

uint32_t reg_name_right_align_at

which defaults to 0 (i.e., no alignment at all). Update the 'register read' command impl to pass 8
as the alignment to RegisterValue::Dump() method. If more sophisticated scheme is desired, we will
need to introduce an additional command option to 'register read' later on.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@158039 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
35f5dc76a37c7dca397566c34e4945f10ad163c1 29-May-2012 Johnny Chen <johnny.chen@apple.com> rdar://problem/11541676
Do not show the derived registers like "eax", ... for the vanilla "register read" command.
Also add a test scenario for that.


git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157647 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
cf5927ee246f5e431162f2753ed9e040dd060fe5 18-May-2012 Greg Clayton <gclayton@apple.com> <rdar://problem/11386214>
<rdar://problem/11455913>

"target symbol add" should flush the cached frames
"register write" should flush the thread state in case registers modifications change stack




git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@157042 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
f4124deeb9532044a38c0774ced872f2709347da 21-Feb-2012 Greg Clayton <gclayton@apple.com> Thread hardening part 3. Now lldb_private::Thread objects have std::weak_ptr
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.

Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.



git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151009 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
24a6bd9835ed1655984397b0cdf35127e47681e9 27-Oct-2011 Greg Clayton <gclayton@apple.com> Added support for the new ".apple_objc" accelerator tables. These tables are
in the same hashed format as the ".apple_names", but they map objective C
class names to all of the methods and class functions. We need to do this
because in the DWARF the methods for Objective C are never contained in the
class definition, they are scattered about at the translation unit level and
they don't even have attributes that say the are contained within the class
itself.

Added 3 new formats which can be used to display data:

eFormatAddressInfo
eFormatHexFloat
eFormatInstruction

eFormatAddressInfo describes an address such as function+offset and file+line,
or symbol + offset, or constant data (c string, 2, 4, 8, or 16 byte constants).
The format character for this is "A", the long format is "address".

eFormatHexFloat will print out the hex float format that compilers tend to use.
The format character for this is "X", the long format is "hex float".

eFormatInstruction will print out disassembly with bytes and it will use the
current target's architecture. The format character for this is "i" (which
used to be being used for the integer format, but the integer format also has
"d", so we gave the "i" format to disassembly), the long format is
"instruction".

Mate the lldb::FormatterChoiceCriterion enumeration private as it should have
been from the start. It is very specialized and doesn't belong in the public
API.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@143114 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
9c236733d43e6250c8a5671a438f4a2afeb9c0b2 26-Oct-2011 Greg Clayton <gclayton@apple.com> Cleaned up many error codes. For any who is filling in error strings into
lldb_private::Error objects the rules are:
- short strings that don't start with a capitol letter unless the name is a
class or anything else that is always capitolized
- no trailing newline character
- should be one line if possible

Implemented a first pass at adding "--gdb-format" support to anything that
accepts format with optional size/count.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142999 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
5325ce94667b391194bc0fa8417cefe32f73f053 25-Oct-2011 Johnny Chen <johnny.chen@apple.com> Patch from Dragos to fix Linux build!


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142932 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
a42880a8e464a3e4f93951ae797313e5e38cdcd3 25-Oct-2011 Greg Clayton <gclayton@apple.com> Updated all commands that use a "--format" / "-f" options to use the new
OptionGroupFormat. Updated OptionGroupFormat to be able to also use the
"--size" and "--count" options. Commands that use a OptionGroupFormat instance
can choose which of the options they want by initializing OptionGroupFormat
accordingly. Clients can either get only the "--format", "--format" + "--size",
or "--format" + "--size" + "--count". This is in preparation for upcoming
chnages where there are alternate ways (GDB format specification) to set a
format.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@142911 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
567e7f3ba16eb48cb9fd6a2f26f2f7269eb6983c 22-Sep-2011 Greg Clayton <gclayton@apple.com> Converted the lldb_private::Process over to use the intrusive
shared pointers.

Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.

Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.

Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140298 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
95536737e35f22659efb916153f8c29b77a2a2f0 25-Aug-2011 Jason Molenda <jmolenda@apple.com> Emit an error message if we're unable to write a value to a register.
(in addition to the previous error message if the value could not be
parsed as a numbe). These both generate reasonable errors now -
reg write rip 0x500000000000000000000a
reg write rip 0x5jjjj


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@138543 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
997b1e82f098a8b748b490d1ae6d0bbe597a59d5 15-May-2011 Greg Clayton <gclayton@apple.com> Added generic register numbers for simple ABI argument registers and defined
the appropriate registers for arm and x86_64. The register names for the
arguments that are the size of a pointer or less are all named "arg1", "arg2",
etc. This allows you to read these registers by name:

(lldb) register read arg1 arg2 arg3
...

You can also now specify you want to see alternate register names when executing
the read register command:

(lldb) register read --alternate
(lldb) register read -A




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131376 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
061b79dbf1fefaf157d414747e98a463a0f32eda 09-May-2011 Greg Clayton <gclayton@apple.com> While implementing unwind information using UnwindAssemblyInstEmulation I ran
into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:

virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);

virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);

There is now a new class specifically designed to hold register values:
lldb_private::RegisterValue

The new register context calls that subclasses must implement are:

virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0;

virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0;

The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..).

All RegiterContext and other sources have been switched over to using the new
regiter value class.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131096 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
557948555a9c33e29d33cec010c26af6726110ae 05-May-2011 Greg Clayton <gclayton@apple.com> Always try and lookup the address in a register if it is encoded as an
integer and the register byte size matches the size of a pointer. This removes
the "--lookup" option.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130910 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
56bbdaf817cb19a2f133e8501473f499be447c2d 28-Apr-2011 Greg Clayton <gclayton@apple.com> Added the ability to specify dumping options (show types, show location,
depth control, pointer depth, and more) when dumping memory and viewing as
a type.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130436 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
ff44ab42e9f5d8e4d550e11d1b69413e0bc75b71 23-Apr-2011 Greg Clayton <gclayton@apple.com> Fixed the SymbolContext::DumpStopContext() to correctly indent and dump
inline contexts when the deepest most block is not inlined.

Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.

Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.

Added the ability to get more than one address range from a SymbolContext
class for the case where a block or function has discontiguous address ranges.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@130044 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
17cd995147b3324680d845b3fc897febcc23c9e0 22-Apr-2011 Greg Clayton <gclayton@apple.com> Did some work on the "register read" command to only show the first register
set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:

(lldb) register read --all

If you want to just see some register sets, you can currently specify them
by index:

(lldb) register read --set 0 --set 2

We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.

You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:

Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup
General Purpose Registers:
rax = 0x0000000100000e98 "----------------------------------------------------------------------"
rbx = 0x0000000000000000
rcx = 0x0000000000000001
rdx = 0x0000000000000000
rdi = 0x0000000100000e98 "----------------------------------------------------------------------"
rsi = 0x0000000100800000
rbp = 0x00007fff5fbff710
rsp = 0x00007fff5fbff280
r8 = 0x0000000000000040
r9 = 0x0000000000000000
r10 = 0x0000000000000000
r11 = 0x0000000000000246
r12 = 0x0000000000000000
r13 = 0x0000000000000000
r14 = 0x0000000000000000
r15 = 0x0000000000000000
rip = 0x00007fff828fa30f libSystem.B.dylib`puts + 1
rflags = 0x0000000000000246
cs = 0x0000000000000027
fs = 0x0000000000000000
gs = 0x0000000000000000

As we can see, we see two constant strings and the PC (register "rip") is
showing the code it resolves to.

I fixed the register "--format" option to work as expected.

Added a setting to disable skipping the function prologue when setting
breakpoints as a target settings variable:

(lldb) settings set target.skip-prologue false

Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.

Did some usability work on the OptionValue classes.

Fixed the "image lookup" command to correctly respond to the "--verbose"
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129977 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
143fcc3a15425659b381502ed4e1e50a3e726f36 13-Apr-2011 Greg Clayton <gclayton@apple.com> Added two new classes for command options:

lldb_private::OptionGroup
lldb_private::OptionGroupOptions

OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:

OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;

Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:

CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}

We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.

Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();

And implemented a new callback named:

virtual Error Options::OptionParsingFinished();

This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.

Modfied:

virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;

to be:

virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;

(option_idx is now unsigned).




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129415 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
b72d0f098e45936fa72e26b1a026c603e17e2d6c 12-Apr-2011 Greg Clayton <gclayton@apple.com> Moved the execution context that was in the Debugger into
the CommandInterpreter where it was always being used.

Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).

Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.

Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.

Fixed an issue where lldb_private::Args had implicitly defined copy
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.

Make sure we don't add empty ModuleSP entries to a module list.

Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.

Abstracted many more calls from in ProcessGDBRemote down into the
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.

Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.

Debugserver can now start up with a --unix-socket (-u for short) and can
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.







git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129351 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
f15996eea072cdaa8a092f22d3a1212b3d95f0ec 08-Apr-2011 Greg Clayton <gclayton@apple.com> Modified the ArchSpec to take an optional "Platform *" when setting the triple.
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.

Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.

Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:

LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).

I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.




git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@129112 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
24bc5d9bfad2a1c562c27e7cf37e1c56d85c45e7 30-Mar-2011 Greg Clayton <gclayton@apple.com> Many improvements to the Platform base class and subclasses. The base Platform
class now implements the Host functionality for a lot of things that make
sense by default so that subclasses can check:

int
PlatformSubclass::Foo ()
{
if (IsHost())
return Platform::Foo (); // Let the platform base class do the host specific stuff

// Platform subclass specific code...
int result = ...
return result;
}

Added new functions to the platform:

virtual const char *Platform::GetUserName (uint32_t uid);
virtual const char *Platform::GetGroupName (uint32_t gid);

The user and group names are cached locally so that remote platforms can avoid
sending packets multiple times to resolve this information.

Added the parent process ID to the ProcessInfo class.

Added a new ProcessInfoMatch class which helps us to match processes up
and changed the Host layer over to using this new class. The new class allows
us to search for processs:
1 - by name (equal to, starts with, ends with, contains, and regex)
2 - by pid
3 - And further check for parent pid == value, uid == value, gid == value,
euid == value, egid == value, arch == value, parent == value.

This is all hookup up to the "platform process list" command which required
adding dumping routines to dump process information. If the Host class
implements the process lookup routines, you can now lists processes on
your local machine:

machine1.foo.com % lldb
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari
94727 244 username usergroup username usergroup x86_64-apple-darwin Xcode
92742 92710 username usergroup username usergroup i386-apple-darwin debugserver


This of course also works remotely with the lldb-platform:

machine1.foo.com % lldb-platform --listen 1234

machine2.foo.com % lldb
(lldb) platform create remote-macosx
Platform: remote-macosx
Connected: no
(lldb) platform connect connect://localhost:1444
Platform: remote-macosx
Triple: x86_64-apple-darwin
OS Version: 10.6.7 (10J869)
Kernel: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
Hostname: machine1.foo.com
Connected: yes
(lldb) platform process list
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE NAME
====== ====== ========== ========== ========== ========== ======================== ============================
99556 244 username usergroup username usergroup x86_64-apple-darwin trustevaluation
99548 65539 username usergroup username usergroup x86_64-apple-darwin lldb
99538 1 username usergroup username usergroup x86_64-apple-darwin FileMerge
94943 1 username usergroup username usergroup x86_64-apple-darwin mdworker
94852 244 username usergroup username usergroup x86_64-apple-darwin Safari

The lldb-platform implements everything with the Host:: layer, so this should
"just work" for linux. I will probably be adding more stuff to the Host layer
for launching processes and attaching to processes so that this support should
eventually just work as well.

Modified the target to be able to be created with an architecture that differs
from the main executable. This is needed for iOS debugging since we can have
an "armv6" binary which can run on an "armv7" machine, so we want to be able
to do:

% lldb
(lldb) platform create remote-ios
(lldb) file --arch armv7 a.out

Where "a.out" is an armv6 executable. The platform then can correctly decide
to open all "armv7" images for all dependent shared libraries.

Modified the disassembly to show the current PC value. Example output:

(lldb) disassemble --frame
a.out`main:
0x1eb7: pushl %ebp
0x1eb8: movl %esp, %ebp
0x1eba: pushl %ebx
0x1ebb: subl $20, %esp
0x1ebe: calll 0x1ec3 ; main + 12 at test.c:18
0x1ec3: popl %ebx
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf
0x1edb: leal 213(%ebx), %eax
0x1ee1: movl %eax, (%esp)
0x1ee4: calll 0x1f1e ; puts
0x1ee9: calll 0x1f0c ; getchar
0x1eee: movl $20, (%esp)
0x1ef5: calll 0x1e6a ; sleep_loop at test.c:6
0x1efa: movl $12, %eax
0x1eff: addl $20, %esp
0x1f02: popl %ebx
0x1f03: leave
0x1f04: ret

This can be handy when dealing with the new --line options that was recently
added:

(lldb) disassemble --line
a.out`main + 13 at test.c:19
18 {
-> 19 printf("Process: %i\n\n", getpid());
20 puts("Press any key to continue..."); getchar();
-> 0x1ec4: calll 0x1f12 ; getpid
0x1ec9: movl %eax, 4(%esp)
0x1ecd: leal 199(%ebx), %eax
0x1ed3: movl %eax, (%esp)
0x1ed6: calll 0x1f18 ; printf

Modified the ModuleList to have a lookup based solely on a UUID. Since the
UUID is typically the MD5 checksum of a binary image, there is no need
to give the path and architecture when searching for a pre-existing
image in an image list.

Now that we support remote debugging a bit better, our lldb_private::Module
needs to be able to track what the original path for file was as the platform
knows it, as well as where the file is locally. The module has the two
following functions to retrieve both paths:

const FileSpec &Module::GetFileSpec () const;
const FileSpec &Module::GetPlatformFileSpec () const;





git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128563 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
2e8cb8a7342a2ea672792067d712a794e215a3a7 19-Feb-2011 Jim Ingham <jingham@apple.com> - Changed all the places where CommandObjectReturn was exporting a StreamString to just exporting
a Stream, and then added GetOutputData & GetErrorData to get the accumulated data.
- Added a StreamTee that will tee output to two provided lldb::StreamSP's.
- Made the CommandObjectReturn use this so you can Tee the results immediately to
the debuggers output file, as well as saving up the results to return when the command
is done executing.
- HandleCommands now uses this so that if you have a set of commands that continue the target
you will see the commands come out as they are processed.
- The Driver now uses this to output the command results as you go, which makes the interface
more reactive seeming.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@126015 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
43b014aa33e20e61790e16ed69a2c57aae2fbc6e 05-Oct-2010 Caroline Tice <ctice@apple.com> Modify existing commands with arguments to use the new argument mechanism
(for standardized argument names, argument help, etc.)



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@115570 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
238c0a1e7b733cee539258faa656159c63f9e893 18-Sep-2010 Greg Clayton <gclayton@apple.com> Fixed the way set/show variables were being accessed to being natively
accessed by the objects that own the settings. The previous approach wasn't
very usable and made for a lot of unnecessary code just to access variables
that were already owned by the objects.

While I fixed those things, I saw that CommandObject objects should really
have a reference to their command interpreter so they can access the terminal
with if they want to output usaage. Fixed up all CommandObjects to take
an interpreter and cleaned up the API to not need the interpreter to be
passed in.

Fixed the disassemble command to output the usage if no options are passed
down and arguments are passed (all disassebmle variants take options, there
are no "args only").



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@114252 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
3a4ea24572fad1e22525f8efb718d49d41e30398 10-Sep-2010 Jason Molenda <jmolenda@apple.com> The first part of an lldb native stack unwinder.

The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).

The ObjectFile class now has an UnwindTable object.

The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.

The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.

UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.

Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.

The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.

There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113581 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
31fbb64aee1432672f776610e15466cbdc2f9795 09-Sep-2010 Caroline Tice <ctice@apple.com> More help text fixes.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113421 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
c1ad82eb979ee856b86aec6e2acb7bddf75f7c4f 08-Sep-2010 Caroline Tice <ctice@apple.com> Small help text fixes, to make it more consistent and accurate.

Temporarily remove -l option from 'expr' command (at Sean's request).



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@113298 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
63094e0bb161580564954dee512955c1c79d3476 23-Jun-2010 Greg Clayton <gclayton@apple.com> Very large changes that were needed in order to allow multiple connections
to the debugger from GUI windows. Previously there was one global debugger
instance that could be accessed that had its own command interpreter and
current state (current target/process/thread/frame). When a GUI debugger
was attached, if it opened more than one window that each had a console
window, there were issues where the last one to setup the global debugger
object won and got control of the debugger.

To avoid this we now create instances of the lldb_private::Debugger that each
has its own state:
- target list for targets the debugger instance owns
- current process/thread/frame
- its own command interpreter
- its own input, output and error file handles to avoid conflicts
- its own input reader stack

So now clients should call:

SBDebugger::Initialize(); // (static function)

SBDebugger debugger (SBDebugger::Create());
// Use which ever file handles you wish
debugger.SetErrorFileHandle (stderr, false);
debugger.SetOutputFileHandle (stdout, false);
debugger.SetInputFileHandle (stdin, true);

// main loop

SBDebugger::Terminate(); // (static function)

SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to
ensure nothing gets destroyed too early when multiple clients might be
attached.

Cleaned up the command interpreter and the CommandObject and all subclasses
to take more appropriate arguments.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106615 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
84cdc15005983e5244d665fa779e33c2b6fac95f 15-Jun-2010 Jim Ingham <jingham@apple.com> Move Args.{cpp,h} and Options.{cpp,h} to Interpreter where they really belong.



git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@106034 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp
24943d2ee8bfaa7cf5893e4709143924157a5c1e 08-Jun-2010 Chris Lattner <sabre@nondot.org> Initial checkin of lldb code from internal Apple repo.


git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@105619 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Commands/CommandObjectRegister.cpp