1/* 2 * WPA Supplicant / Network configuration structures 3 * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9#ifndef CONFIG_SSID_H 10#define CONFIG_SSID_H 11 12#include "common/defs.h" 13#include "utils/list.h" 14#include "eap_peer/eap_config.h" 15 16 17#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1) 18#define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \ 19 EAPOL_FLAG_REQUIRE_KEY_BROADCAST) 20#define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN) 21#define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X) 22#define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) 23#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) 24#define DEFAULT_FRAGMENT_SIZE 1398 25 26#define DEFAULT_BG_SCAN_PERIOD -1 27#define DEFAULT_MESH_MAX_RETRIES 2 28#define DEFAULT_MESH_RETRY_TIMEOUT 40 29#define DEFAULT_MESH_CONFIRM_TIMEOUT 40 30#define DEFAULT_MESH_HOLDING_TIMEOUT 40 31#define DEFAULT_DISABLE_HT 0 32#define DEFAULT_DISABLE_HT40 0 33#define DEFAULT_DISABLE_SGI 0 34#define DEFAULT_DISABLE_LDPC 0 35#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */ 36#define DEFAULT_AMPDU_FACTOR -1 /* no change */ 37#define DEFAULT_AMPDU_DENSITY -1 /* no change */ 38#define DEFAULT_USER_SELECTED_SIM 1 39 40struct psk_list_entry { 41 struct dl_list list; 42 u8 addr[ETH_ALEN]; 43 u8 psk[32]; 44 u8 p2p; 45}; 46 47/** 48 * struct wpa_ssid - Network configuration data 49 * 50 * This structure includes all the configuration variables for a network. This 51 * data is included in the per-interface configuration data as an element of 52 * the network list, struct wpa_config::ssid. Each network block in the 53 * configuration is mapped to a struct wpa_ssid instance. 54 */ 55struct wpa_ssid { 56 /** 57 * next - Next network in global list 58 * 59 * This pointer can be used to iterate over all networks. The head of 60 * this list is stored in the ssid field of struct wpa_config. 61 */ 62 struct wpa_ssid *next; 63 64 /** 65 * pnext - Next network in per-priority list 66 * 67 * This pointer can be used to iterate over all networks in the same 68 * priority class. The heads of these list are stored in the pssid 69 * fields of struct wpa_config. 70 */ 71 struct wpa_ssid *pnext; 72 73 /** 74 * id - Unique id for the network 75 * 76 * This identifier is used as a unique identifier for each network 77 * block when using the control interface. Each network is allocated an 78 * id when it is being created, either when reading the configuration 79 * file or when a new network is added through the control interface. 80 */ 81 int id; 82 83 /** 84 * priority - Priority group 85 * 86 * By default, all networks will get same priority group (0). If some 87 * of the networks are more desirable, this field can be used to change 88 * the order in which wpa_supplicant goes through the networks when 89 * selecting a BSS. The priority groups will be iterated in decreasing 90 * priority (i.e., the larger the priority value, the sooner the 91 * network is matched against the scan results). Within each priority 92 * group, networks will be selected based on security policy, signal 93 * strength, etc. 94 * 95 * Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are 96 * not using this priority to select the order for scanning. Instead, 97 * they try the networks in the order that used in the configuration 98 * file. 99 */ 100 int priority; 101 102 /** 103 * ssid - Service set identifier (network name) 104 * 105 * This is the SSID for the network. For wireless interfaces, this is 106 * used to select which network will be used. If set to %NULL (or 107 * ssid_len=0), any SSID can be used. For wired interfaces, this must 108 * be set to %NULL. Note: SSID may contain any characters, even nul 109 * (ASCII 0) and as such, this should not be assumed to be a nul 110 * terminated string. ssid_len defines how many characters are valid 111 * and the ssid field is not guaranteed to be nul terminated. 112 */ 113 u8 *ssid; 114 115 /** 116 * ssid_len - Length of the SSID 117 */ 118 size_t ssid_len; 119 120 /** 121 * bssid - BSSID 122 * 123 * If set, this network block is used only when associating with the AP 124 * using the configured BSSID 125 * 126 * If this is a persistent P2P group (disabled == 2), this is the GO 127 * Device Address. 128 */ 129 u8 bssid[ETH_ALEN]; 130 131 /** 132 * bssid_blacklist - List of inacceptable BSSIDs 133 */ 134 u8 *bssid_blacklist; 135 size_t num_bssid_blacklist; 136 137 /** 138 * bssid_blacklist - List of acceptable BSSIDs 139 */ 140 u8 *bssid_whitelist; 141 size_t num_bssid_whitelist; 142 143 /** 144 * bssid_set - Whether BSSID is configured for this network 145 */ 146 int bssid_set; 147 148 /** 149 * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set 150 */ 151 u8 go_p2p_dev_addr[ETH_ALEN]; 152 153 /** 154 * psk - WPA pre-shared key (256 bits) 155 */ 156 u8 psk[32]; 157 158 /** 159 * psk_set - Whether PSK field is configured 160 */ 161 int psk_set; 162 163 /** 164 * passphrase - WPA ASCII passphrase 165 * 166 * If this is set, psk will be generated using the SSID and passphrase 167 * configured for the network. ASCII passphrase must be between 8 and 168 * 63 characters (inclusive). 169 */ 170 char *passphrase; 171 172 /** 173 * ext_psk - PSK/passphrase name in external storage 174 * 175 * If this is set, PSK/passphrase will be fetched from external storage 176 * when requesting association with the network. 177 */ 178 char *ext_psk; 179 180 /** 181 * mem_only_psk - Whether to keep PSK/passphrase only in memory 182 * 183 * 0 = allow psk/passphrase to be stored to the configuration file 184 * 1 = do not store psk/passphrase to the configuration file 185 */ 186 int mem_only_psk; 187 188 /** 189 * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_* 190 */ 191 int pairwise_cipher; 192 193 /** 194 * group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_* 195 */ 196 int group_cipher; 197 198 /** 199 * key_mgmt - Bitfield of allowed key management protocols 200 * 201 * WPA_KEY_MGMT_* 202 */ 203 int key_mgmt; 204 205 /** 206 * bg_scan_period - Background scan period in seconds, 0 to disable, or 207 * -1 to indicate no change to default driver configuration 208 */ 209 int bg_scan_period; 210 211 /** 212 * proto - Bitfield of allowed protocols, WPA_PROTO_* 213 */ 214 int proto; 215 216 /** 217 * auth_alg - Bitfield of allowed authentication algorithms 218 * 219 * WPA_AUTH_ALG_* 220 */ 221 int auth_alg; 222 223 /** 224 * scan_ssid - Scan this SSID with Probe Requests 225 * 226 * scan_ssid can be used to scan for APs using hidden SSIDs. 227 * Note: Many drivers do not support this. ap_mode=2 can be used with 228 * such drivers to use hidden SSIDs. 229 */ 230 int scan_ssid; 231 232#ifdef IEEE8021X_EAPOL 233#define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0) 234#define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1) 235 /** 236 * eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*) 237 */ 238 int eapol_flags; 239 240 /** 241 * eap - EAP peer configuration for this network 242 */ 243 struct eap_peer_config eap; 244#endif /* IEEE8021X_EAPOL */ 245 246#define NUM_WEP_KEYS 4 247#define MAX_WEP_KEY_LEN 16 248 /** 249 * wep_key - WEP keys 250 */ 251 u8 wep_key[NUM_WEP_KEYS][MAX_WEP_KEY_LEN]; 252 253 /** 254 * wep_key_len - WEP key lengths 255 */ 256 size_t wep_key_len[NUM_WEP_KEYS]; 257 258 /** 259 * wep_tx_keyidx - Default key index for TX frames using WEP 260 */ 261 int wep_tx_keyidx; 262 263 /** 264 * proactive_key_caching - Enable proactive key caching 265 * 266 * This field can be used to enable proactive key caching which is also 267 * known as opportunistic PMKSA caching for WPA2. This is disabled (0) 268 * by default unless default value is changed with the global okc=1 269 * parameter. Enable by setting this to 1. 270 * 271 * Proactive key caching is used to make supplicant assume that the APs 272 * are using the same PMK and generate PMKSA cache entries without 273 * doing RSN pre-authentication. This requires support from the AP side 274 * and is normally used with wireless switches that co-locate the 275 * authenticator. 276 * 277 * Internally, special value -1 is used to indicate that the parameter 278 * was not specified in the configuration (i.e., default behavior is 279 * followed). 280 */ 281 int proactive_key_caching; 282 283 /** 284 * mixed_cell - Whether mixed cells are allowed 285 * 286 * This option can be used to configure whether so called mixed cells, 287 * i.e., networks that use both plaintext and encryption in the same 288 * SSID, are allowed. This is disabled (0) by default. Enable by 289 * setting this to 1. 290 */ 291 int mixed_cell; 292 293#ifdef IEEE8021X_EAPOL 294 295 /** 296 * leap - Number of EAP methods using LEAP 297 * 298 * This field should be set to 1 if LEAP is enabled. This is used to 299 * select IEEE 802.11 authentication algorithm. 300 */ 301 int leap; 302 303 /** 304 * non_leap - Number of EAP methods not using LEAP 305 * 306 * This field should be set to >0 if any EAP method other than LEAP is 307 * enabled. This is used to select IEEE 802.11 authentication 308 * algorithm. 309 */ 310 int non_leap; 311 312 /** 313 * eap_workaround - EAP workarounds enabled 314 * 315 * wpa_supplicant supports number of "EAP workarounds" to work around 316 * interoperability issues with incorrectly behaving authentication 317 * servers. This is recommended to be enabled by default because some 318 * of the issues are present in large number of authentication servers. 319 * 320 * Strict EAP conformance mode can be configured by disabling 321 * workarounds with eap_workaround = 0. 322 */ 323 unsigned int eap_workaround; 324 325#endif /* IEEE8021X_EAPOL */ 326 327 /** 328 * mode - IEEE 802.11 operation mode (Infrastucture/IBSS) 329 * 330 * 0 = infrastructure (Managed) mode, i.e., associate with an AP. 331 * 332 * 1 = IBSS (ad-hoc, peer-to-peer) 333 * 334 * 2 = AP (access point) 335 * 336 * 3 = P2P Group Owner (can be set in the configuration file) 337 * 338 * 4 = P2P Group Formation (used internally; not in configuration 339 * files) 340 * 341 * 5 = Mesh 342 * 343 * Note: IBSS can only be used with key_mgmt NONE (plaintext and static 344 * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE 345 * (fixed group key TKIP/CCMP) is available for backwards compatibility, 346 * but its use is deprecated. WPA-None requires following network block 347 * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or 348 * CCMP, but not both), and psk must also be set (either directly or 349 * using ASCII passphrase). 350 */ 351 enum wpas_mode { 352 WPAS_MODE_INFRA = 0, 353 WPAS_MODE_IBSS = 1, 354 WPAS_MODE_AP = 2, 355 WPAS_MODE_P2P_GO = 3, 356 WPAS_MODE_P2P_GROUP_FORMATION = 4, 357 WPAS_MODE_MESH = 5, 358 } mode; 359 360 /** 361 * disabled - Whether this network is currently disabled 362 * 363 * 0 = this network can be used (default). 364 * 1 = this network block is disabled (can be enabled through 365 * ctrl_iface, e.g., with wpa_cli or wpa_gui). 366 * 2 = this network block includes parameters for a persistent P2P 367 * group (can be used with P2P ctrl_iface commands) 368 */ 369 int disabled; 370 371 /** 372 * disabled_for_connect - Whether this network was temporarily disabled 373 * 374 * This flag is used to reenable all the temporarily disabled networks 375 * after either the success or failure of a WPS connection. 376 */ 377 int disabled_for_connect; 378 379 /** 380 * peerkey - Whether PeerKey handshake for direct links is allowed 381 * 382 * This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are 383 * enabled. 384 * 385 * 0 = disabled (default) 386 * 1 = enabled 387 */ 388 int peerkey; 389 390 /** 391 * id_str - Network identifier string for external scripts 392 * 393 * This value is passed to external ctrl_iface monitors in 394 * WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR 395 * environment variable for action scripts. 396 */ 397 char *id_str; 398 399#ifdef CONFIG_IEEE80211W 400 /** 401 * ieee80211w - Whether management frame protection is enabled 402 * 403 * This value is used to configure policy for management frame 404 * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required. 405 * This is disabled by default unless the default value has been changed 406 * with the global pmf=1/2 parameter. 407 * 408 * Internally, special value 3 is used to indicate that the parameter 409 * was not specified in the configuration (i.e., default behavior is 410 * followed). 411 */ 412 enum mfp_options ieee80211w; 413#endif /* CONFIG_IEEE80211W */ 414 415 /** 416 * frequency - Channel frequency in megahertz (MHz) for IBSS 417 * 418 * This value is used to configure the initial channel for IBSS (adhoc) 419 * networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in 420 * the infrastructure mode. In addition, this value is only used by the 421 * station that creates the IBSS. If an IBSS network with the 422 * configured SSID is already present, the frequency of the network 423 * will be used instead of this configured value. 424 */ 425 int frequency; 426 427 /** 428 * fixed_freq - Use fixed frequency for IBSS 429 */ 430 int fixed_freq; 431 432 /** 433 * mesh_basic_rates - BSS Basic rate set for mesh network 434 * 435 */ 436 int *mesh_basic_rates; 437 438 /** 439 * Mesh network plink parameters 440 */ 441 int dot11MeshMaxRetries; 442 int dot11MeshRetryTimeout; /* msec */ 443 int dot11MeshConfirmTimeout; /* msec */ 444 int dot11MeshHoldingTimeout; /* msec */ 445 446 int ht40; 447 448 int vht; 449 450 /** 451 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds 452 * 453 * This value can be used to enforce rekeying of PTK to mitigate some 454 * attacks against TKIP deficiencies. 455 */ 456 int wpa_ptk_rekey; 457 458 /** 459 * scan_freq - Array of frequencies to scan or %NULL for all 460 * 461 * This is an optional zero-terminated array of frequencies in 462 * megahertz (MHz) to include in scan requests when searching for this 463 * network. This can be used to speed up scanning when the network is 464 * known to not use all possible channels. 465 */ 466 int *scan_freq; 467 468 /** 469 * bgscan - Background scan and roaming parameters or %NULL if none 470 * 471 * This is an optional set of parameters for background scanning and 472 * roaming within a network (ESS) in following format: 473 * <bgscan module name>:<module parameters> 474 */ 475 char *bgscan; 476 477 /** 478 * ignore_broadcast_ssid - Hide SSID in AP mode 479 * 480 * Send empty SSID in beacons and ignore probe request frames that do 481 * not specify full SSID, i.e., require stations to know SSID. 482 * default: disabled (0) 483 * 1 = send empty (length=0) SSID in beacon and ignore probe request 484 * for broadcast SSID 485 * 2 = clear SSID (ASCII 0), but keep the original length (this may be 486 * required with some clients that do not support empty SSID) and 487 * ignore probe requests for broadcast SSID 488 */ 489 int ignore_broadcast_ssid; 490 491 /** 492 * freq_list - Array of allowed frequencies or %NULL for all 493 * 494 * This is an optional zero-terminated array of frequencies in 495 * megahertz (MHz) to allow for selecting the BSS. If set, scan results 496 * that do not match any of the specified frequencies are not 497 * considered when selecting a BSS. 498 */ 499 int *freq_list; 500 501 /** 502 * p2p_client_list - List of P2P Clients in a persistent group (GO) 503 * 504 * This is a list of P2P Clients (P2P Device Address) that have joined 505 * the persistent group. This is maintained on the GO for persistent 506 * group entries (disabled == 2). 507 */ 508 u8 *p2p_client_list; 509 510 /** 511 * num_p2p_clients - Number of entries in p2p_client_list 512 */ 513 size_t num_p2p_clients; 514 515#ifndef P2P_MAX_STORED_CLIENTS 516#define P2P_MAX_STORED_CLIENTS 100 517#endif /* P2P_MAX_STORED_CLIENTS */ 518 519 /** 520 * psk_list - Per-client PSKs (struct psk_list_entry) 521 */ 522 struct dl_list psk_list; 523 524 /** 525 * p2p_group - Network generated as a P2P group (used internally) 526 */ 527 int p2p_group; 528 529 /** 530 * p2p_persistent_group - Whether this is a persistent group 531 */ 532 int p2p_persistent_group; 533 534 /** 535 * temporary - Whether this network is temporary and not to be saved 536 */ 537 int temporary; 538 539 /** 540 * export_keys - Whether keys may be exported 541 * 542 * This attribute will be set when keys are determined through 543 * WPS or similar so that they may be exported. 544 */ 545 int export_keys; 546 547#ifdef CONFIG_HT_OVERRIDES 548 /** 549 * disable_ht - Disable HT (IEEE 802.11n) for this network 550 * 551 * By default, use it if it is available, but this can be configured 552 * to 1 to have it disabled. 553 */ 554 int disable_ht; 555 556 /** 557 * disable_ht40 - Disable HT40 for this network 558 * 559 * By default, use it if it is available, but this can be configured 560 * to 1 to have it disabled. 561 */ 562 int disable_ht40; 563 564 /** 565 * disable_sgi - Disable SGI (Short Guard Interval) for this network 566 * 567 * By default, use it if it is available, but this can be configured 568 * to 1 to have it disabled. 569 */ 570 int disable_sgi; 571 572 /** 573 * disable_ldpc - Disable LDPC for this network 574 * 575 * By default, use it if it is available, but this can be configured 576 * to 1 to have it disabled. 577 */ 578 int disable_ldpc; 579 580 /** 581 * ht40_intolerant - Indicate 40 MHz intolerant for this network 582 */ 583 int ht40_intolerant; 584 585 /** 586 * disable_max_amsdu - Disable MAX A-MSDU 587 * 588 * A-MDSU will be 3839 bytes when disabled, or 7935 589 * when enabled (assuming it is otherwise supported) 590 * -1 (default) means do not apply any settings to the kernel. 591 */ 592 int disable_max_amsdu; 593 594 /** 595 * ampdu_factor - Maximum A-MPDU Length Exponent 596 * 597 * Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009. 598 */ 599 int ampdu_factor; 600 601 /** 602 * ampdu_density - Minimum A-MPDU Start Spacing 603 * 604 * Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009. 605 */ 606 int ampdu_density; 607 608 /** 609 * ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000... 610 * 611 * By default (empty string): Use whatever the OS has configured. 612 */ 613 char *ht_mcs; 614#endif /* CONFIG_HT_OVERRIDES */ 615 616#ifdef CONFIG_VHT_OVERRIDES 617 /** 618 * disable_vht - Disable VHT (IEEE 802.11ac) for this network 619 * 620 * By default, use it if it is available, but this can be configured 621 * to 1 to have it disabled. 622 */ 623 int disable_vht; 624 625 /** 626 * vht_capa - VHT capabilities to use 627 */ 628 unsigned int vht_capa; 629 630 /** 631 * vht_capa_mask - mask for VHT capabilities 632 */ 633 unsigned int vht_capa_mask; 634 635 int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2, 636 vht_rx_mcs_nss_3, vht_rx_mcs_nss_4, 637 vht_rx_mcs_nss_5, vht_rx_mcs_nss_6, 638 vht_rx_mcs_nss_7, vht_rx_mcs_nss_8; 639 int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2, 640 vht_tx_mcs_nss_3, vht_tx_mcs_nss_4, 641 vht_tx_mcs_nss_5, vht_tx_mcs_nss_6, 642 vht_tx_mcs_nss_7, vht_tx_mcs_nss_8; 643#endif /* CONFIG_VHT_OVERRIDES */ 644 645 /** 646 * ap_max_inactivity - Timeout in seconds to detect STA's inactivity 647 * 648 * This timeout value is used in AP mode to clean up inactive stations. 649 * By default: 300 seconds. 650 */ 651 int ap_max_inactivity; 652 653 /** 654 * dtim_period - DTIM period in Beacon intervals 655 * By default: 2 656 */ 657 int dtim_period; 658 659 /** 660 * beacon_int - Beacon interval (default: 100 TU) 661 */ 662 int beacon_int; 663 664 /** 665 * auth_failures - Number of consecutive authentication failures 666 */ 667 unsigned int auth_failures; 668 669 /** 670 * disabled_until - Network block disabled until this time if non-zero 671 */ 672 struct os_reltime disabled_until; 673 674 /** 675 * parent_cred - Pointer to parent wpa_cred entry 676 * 677 * This pointer can be used to delete temporary networks when a wpa_cred 678 * that was used to create them is removed. This pointer should not be 679 * dereferences since it may not be updated in all cases. 680 */ 681 void *parent_cred; 682 683#ifdef CONFIG_MACSEC 684 /** 685 * macsec_policy - Determines the policy for MACsec secure session 686 * 687 * 0: MACsec not in use (default) 688 * 1: MACsec enabled - Should secure, accept key server's advice to 689 * determine whether to use a secure session or not. 690 */ 691 int macsec_policy; 692#endif /* CONFIG_MACSEC */ 693 694#ifdef CONFIG_HS20 695 int update_identifier; 696#endif /* CONFIG_HS20 */ 697 698 unsigned int wps_run; 699 700 /** 701 * mac_addr - MAC address policy 702 * 703 * 0 = use permanent MAC address 704 * 1 = use random MAC address for each ESS connection 705 * 2 = like 1, but maintain OUI (with local admin bit set) 706 * 707 * Internally, special value -1 is used to indicate that the parameter 708 * was not specified in the configuration (i.e., default behavior is 709 * followed). 710 */ 711 int mac_addr; 712 713 /** 714 * no_auto_peer - Do not automatically peer with compatible mesh peers 715 * 716 * When unset, the reception of a beacon from a another mesh peer in 717 * this MBSS will trigger a peering attempt. 718 */ 719 int no_auto_peer; 720}; 721 722#endif /* CONFIG_SSID_H */ 723