| 7c79a27b955432dfd3ad9439640f0af2eccf37b8 |
|
08-May-2013 |
Jim Ingham <jingham@apple.com> |
Figure out the reply to "PlanExplainsStop" once when we stop and then use the cached
value. This fixes problems, for instance, with the StepRange plans, where they know that
they explained the stop because they were at their "run to here" breakpoint, then deleted
that breakpoint, so when they got asked again, doh! I had done this for a couple of plans
in an ad hoc fashion, this just formalizes it.
Also add a "ResumeRequested" in Process so that the code in the completion handlers can
tell the ShouldStop logic they want to resume rather than just directly resuming. That allows
us to handle resuming in a more controlled fashion.
Also, SetPublicState can take a "restarted" flag, so that it doesn't drop the run lock when
the target was immediately restarted.
--This line, and those below , will be ignored--
M test/lang/objc/objc-dynamic-value/TestObjCDynamicValue.py
M include/lldb/Target/ThreadList.h
M include/lldb/Target/ThreadPlanStepOut.h
M include/lldb/Target/Thread.h
M include/lldb/Target/ThreadPlanBase.h
M include/lldb/Target/ThreadPlanStepThrough.h
M include/lldb/Target/ThreadPlanStepInstruction.h
M include/lldb/Target/ThreadPlanStepInRange.h
M include/lldb/Target/ThreadPlanStepOverBreakpoint.h
M include/lldb/Target/ThreadPlanStepUntil.h
M include/lldb/Target/StopInfo.h
M include/lldb/Target/Process.h
M include/lldb/Target/ThreadPlanRunToAddress.h
M include/lldb/Target/ThreadPlan.h
M include/lldb/Target/ThreadPlanCallFunction.h
M include/lldb/Target/ThreadPlanStepOverRange.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.h
M source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
M source/Target/StopInfo.cpp
M source/Target/Process.cpp
M source/Target/ThreadPlanRunToAddress.cpp
M source/Target/ThreadPlan.cpp
M source/Target/ThreadPlanCallFunction.cpp
M source/Target/ThreadPlanStepOverRange.cpp
M source/Target/ThreadList.cpp
M source/Target/ThreadPlanStepOut.cpp
M source/Target/Thread.cpp
M source/Target/ThreadPlanBase.cpp
M source/Target/ThreadPlanStepThrough.cpp
M source/Target/ThreadPlanStepInstruction.cpp
M source/Target/ThreadPlanStepInRange.cpp
M source/Target/ThreadPlanStepOverBreakpoint.cpp
M source/Target/ThreadPlanStepUntil.cpp
M lldb.xcodeproj/xcshareddata/xcschemes/Run Testsuite.xcscheme
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181381 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 952e9dc874944fcdbbb224f3ec4fc2c859376f64 |
|
28-Mar-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13521159>
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@178191 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 89e248f04ecb87d0df4a4b96158c3fac0a3e43c7 |
|
09-Feb-2013 |
Jim Ingham <jingham@apple.com> |
Reworked the way Process::RunThreadPlan and the ThreadPlanCallFunction interoperate to fix problems where
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.
<rdar://problem/12993641>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174793 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| b794020ffbd6473c59a6e98be044df50abf7fc30 |
|
15-Jan-2013 |
Jim Ingham <jingham@apple.com> |
Separated the "expr --unwind-on-error" behavior into two parts, actual errors (i.e. crashes) which continue to be
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@172503 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 6798bd472f98f860b911a0de0586a73f3fa6ddf7 |
|
07-Dec-2012 |
Jim Ingham <jingham@apple.com> |
Now that we set ThreadPlanCallFunction to private in the constructor, it is confusing that we set it
again in client code after creating the plans. So remove those unnecessary calls.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@169625 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 5f35a4be95aed0e5b2cb36f7d785bcbfc67284ae |
|
29-Nov-2012 |
Daniel Malea <daniel.malea@intel.com> |
Resolve printf formatting warnings on Linux:
- use macros from inttypes.h for format strings instead of OS-specific types
Patch from Matt Kopec!
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@168945 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 110b55f22f8cda703c4fb6f1c2affb8ccbef215b |
|
11-May-2012 |
Jim Ingham <jingham@apple.com> |
Don't try to use "OkayToDiscard" to mean BOTH this plan is a user plan or not AND unwind on error.
rdar://problem/11419156
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156627 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 038fa8e30621e0e55faed3479387d811986f28b7 |
|
10-May-2012 |
Jim Ingham <jingham@apple.com> |
If the ObjC Step Through Trampoline plan causes a target crash, properly propagate the error back to
the controlling plans so that they don't lose control.
Also change "ThreadPlanStepThrough" to take the return StackID for its backstop breakpoint as an argument
to the constructor rather than having it try to figure it out itself, since it might get it wrong whereas
the caller always knows where it is coming from.
rdar://problem/11402287
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@156529 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 1831e78a6253392fca1c99e555e7adaa3f372647 |
|
07-Apr-2012 |
Jim Ingham <jingham@apple.com> |
We sometimes need to be able to call functions (via Process::RunThreadPlan) from code run on the private state thread. To do that we have to
spin up a temporary "private state thread" that will respond to events from the lower level process plugins. This check-in should work to do
that, but it is still buggy. However, if you don't call functions on the private state thread, these changes make no difference.
This patch also moves the code in the AppleObjCRuntime step-through-trampoline handler that might call functions (in the case where the debug
server doesn't support the memory allocate/deallocate packet) out to a safe place to do that call.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@154230 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| f4124deeb9532044a38c0774ced872f2709347da |
|
21-Feb-2012 |
Greg Clayton <gclayton@apple.com> |
Thread hardening part 3. Now lldb_private::Thread objects have std::weak_ptr
objects for the backlink to the lldb_private::Process. The issues we were
running into before was someone was holding onto a shared pointer to a
lldb_private::Thread for too long, and the lldb_private::Process parent object
would get destroyed and the lldb_private::Thread had a "Process &m_process"
member which would just treat whatever memory that used to be a Process as a
valid Process. This was mostly happening for lldb_private::StackFrame objects
that had a member like "Thread &m_thread". So this completes the internal
strong/weak changes.
Documented the ExecutionContext and ExecutionContextRef classes so that our
LLDB developers can understand when and where to use ExecutionContext and
ExecutionContextRef objects.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151009 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 567e7f3ba16eb48cb9fd6a2f26f2f7269eb6983c |
|
22-Sep-2011 |
Greg Clayton <gclayton@apple.com> |
Converted the lldb_private::Process over to use the intrusive
shared pointers.
Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.
Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.
Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@140298 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 6e0101c86555a06b3bd4cb6104b35abfae0b0057 |
|
17-Sep-2011 |
Greg Clayton <gclayton@apple.com> |
Convert lldb::ModuleSP to use an instrusive ref counted pointer.
We had some cases where getting the shared pointer for a module from
the global module list was causing a performance issue when debugging
with DWARF in .o files. Now that the module uses intrusive ref counts,
we can easily convert any pointer to a shared pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139983 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 5a26910ed231503d2a7a71365a44e379a994f4e6 |
|
22-May-2011 |
Greg Clayton <gclayton@apple.com> |
Added functions to lldb_private::Address to set an address from a load address
and set the address as an opcode address or as a callable address. This is
needed in various places in the thread plans to make sure that addresses that
might be found in symbols or runtime might already have extra bits set (ARM/Thumb).
The new functions are:
bool
Address::SetCallableLoadAddress (lldb::addr_t load_addr, Target *target);
bool
Address::SetOpcodeLoadAddress (lldb::addr_t load_addr, Target *target);
SetCallableLoadAddress will initialize a section offset address if it can,
and if so it might possibly set some bits in the address to make the address
callable (bit zero might get set for ARM for Thumb functions).
SetOpcodeLoadAddress will initialize a section offset address using the
specified target and it will strip any special address bits if needed
depending on the target.
Fixed the ABIMacOSX_arm::GetArgumentValues() function to require arguments
1-4 to be in the needed registers (previously this would incorrectly fallback
to the stack) and return false if unable to get the register values. The
function was also modified to first look for the generic argument registers
and then fall back to finding the registers by name.
Fixed the objective trampoline handler to use the new Address::SetOpcodeLoadAddress
function when needed to avoid address mismatches when trying to complete
steps into objective C methods. Make similar fixes inside the
AppleThreadPlanStepThroughObjCTrampoline::ShouldStop() function.
Modified ProcessGDBRemote::BuildDynamicRegisterInfo(...) to be able to deal with
the new generic argument registers.
Modified RNBRemote::HandlePacket_qRegisterInfo() to handle the new generic
argument registers on the debugserver side.
Modified DNBArchMachARM::NumSupportedHardwareBreakpoints() to be able to
detect how many hardware breakpoint registers there are using a darwin sysctl.
Did the same for hardware watchpoints in
DNBArchMachARM::NumSupportedHardwareWatchpoints().
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@131834 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| b344843f75ef893762c93fd0a22d2d45712ce74d |
|
24-Mar-2011 |
Greg Clayton <gclayton@apple.com> |
Fixed the LLDB build so that we can have private types, private enums and
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@128239 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 1ebdcc7789aac1ef30ad6dcd485dff86c63136ad |
|
21-Jan-2011 |
Greg Clayton <gclayton@apple.com> |
Added support for stepping out of a frame. If you have 10 stack frames, and you
select frame #3, you can then do a step out and be able to go directly to the
frame above frame #3!
Added StepOverUntil and StepOutOfFrame to the SBThread API to allow more powerful
stepping.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@123970 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 6507dd90b5d27662537caee49a3a3cc236f85a53 |
|
10-Dec-2010 |
Jim Ingham <jingham@apple.com> |
Changing the ObjC find method implementation to use a ClangUtilityFunction inserted into the target. Consolidate all the
logic for finding the target of a method dispatch into this function, insert & call it. Gets calls to super, and all the
fixup & fixedup variants working properly. Also gets the class from the object so that we step through KVO wrapper methods
into the actual user code.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@121437 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 745ac7a5826fe7c392007941a4046bfb1a8dff81 |
|
11-Nov-2010 |
Jim Ingham <jingham@apple.com> |
Add ThreadPlanTracer class to allow instruction step tracing of execution.
Also changed eSetVarTypeBool to eSetVarTypeBoolean to make it consistent with eArgTypeBoolean.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118824 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| e005f2ce03c489ebde9110678a29cbfe8488d5b4 |
|
06-Nov-2010 |
Greg Clayton <gclayton@apple.com> |
Modified all logging calls to hand out shared pointers to make sure we
don't crash if we disable logging when some code already has a copy of the
logger. Prior to this fix, logs were handed out as pointers and if they were
held onto while a log got disabled, then it could cause a crash. Now all logs
are handed out as shared pointers so this problem shouldn't happen anymore.
We are also using our new shared pointers that put the shared pointer count
and the object into the same allocation for a tad better performance.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118319 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 4f385f181467701d2c5225f2c954ed5771e0763f |
|
05-Nov-2010 |
Jim Ingham <jingham@apple.com> |
Handle stepping through ObjC vtable trampoline code.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118270 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|
| 2eac2b9b61bfbe6079bab86e879263d63046ac0a |
|
04-Nov-2010 |
Jim Ingham <jingham@apple.com> |
Add a ObjC V1 runtime, and a generic AppleObjCRuntime plugin.
Also move the Checker creation into the Apple Runtime code.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@118255 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleThreadPlanStepThroughObjCTrampoline.cpp
|