| 7940069905bee0b2e5f0661bf37c9f906ddf8603 |
|
10-Jul-2013 |
Greg Clayton <gclayton@apple.com> |
Cleanup on the unified section list changes. Main changes are:
- ObjectFile::GetSymtab() and ObjectFile::ClearSymtab() no longer takes any flags
- Module coordinates with the object files and contain a unified section list so that object file and symbol file can share sections when they need to, yet contain their own sections.
Other cleanups:
- Fixed Symbol::GetByteSize() to not have the symbol table compute the byte sizes on the fly
- Modified the ObjectFileMachO class to compute symbol sizes all at once efficiently
- Modified the Symtab class to store a file address lookup table for more efficient lookups
- Removed Section::Finalize() and SectionList::Finalize() as they did nothing
- Improved performance of the detection of symbol files that have debug maps by excluding stripped files and core files, debug files, object files and stubs
- Added the ability to tell if an ObjectFile has been stripped with ObjectFile::IsStripped() (used this for the above performance improvement)
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185990 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| a807ceef5dad2b24e5bae5c5a193ff03aa7ec8d9 |
|
01-Jul-2013 |
Michael Sartain <mikesart@valvesoftware.com> |
Split symbol support for ELF and Linux.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@185366 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 0e191607adcb0ea8ebd06c278be648a7f5c0097f |
|
10-May-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13854277>
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@181631 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 36b877d2d27f7d1890f2d13807a3addb216648e2 |
|
25-Apr-2013 |
Greg Clayton <gclayton@apple.com> |
Added the ability to extract a ModuleSpecList (a new class) from an ObjectFile. This is designed to be used when you have an object file that contains one or more architectures (MacOSX universal (fat) files) and/or one or more objects (BSD archive (.a files)).
There is a new static ObjectFile function you can call:
size_t
ObjectFile::GetModuleSpecifications (const FileSpec &file,
lldb::offset_t file_offset,
ModuleSpecList &specs)
This will fill in "specs" which the details of all the module specs (file + arch + UUID (if there is one) + object name (for BSD archive objects eventually) + file offset to the object in question).
This helps us when a user specifies a file that contains a single architecture, and also helps us when we are given a debug symbol file (like a dSYM file on MacOSX) that contains one or more architectures and we need to be able to match it up to an existing Module that has no debug info.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@180224 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 464a5063bc59755cb6ec063d0b2491097302d2ab |
|
04-Mar-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13338643>
DWARF with .o files now uses 40-60% less memory!
Big fixes include:
- Change line table internal representation to contain "file addresses". Since each line table is owned by a compile unit that is owned by a module, it makes address translation into lldb_private::Address easy to do when needed.
- Removed linked address members/methods from lldb_private::Section and lldb_private::Address
- lldb_private::LineTable can now relink itself using a FileRangeMap to make it easier to re-link line tables in the future
- Added ObjectFile::ClearSymtab() so that we can get rid of the object file symbol tables after we parse them once since they are not needed and kept memory allocated for no reason
- Moved the m_sections_ap (std::auto_ptr to section list) and m_symtab_ap (std::auto_ptr to the lldb_private::Symtab) out of each of the ObjectFile subclasses and put it into lldb_private::ObjectFile.
- Changed how the debug map is parsed and stored to be able to:
- Lazily parse the debug map for each object file
- not require the address map for a .o file until debug information is linked for a .o file
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@176454 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| cbe61bd26db663fa3036866dc33315c6ffc37910 |
|
06-Feb-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13159777>
lldb was mmap'ing archive files once per .o file it loads, now it correctly shares the archive between modules.
LLDB was also always mapping entire contents of universal mach-o files, now it maps just the slice that is required.
Added a new logging channel for "lldb" called "mmap" to help track future regressions.
Modified the ObjectFile and ObjectContainer plugin interfaces to take a data offset along with the file offset and size so we can implement the correct caching and efficient reading of parts of files without mmap'ing the entire file like we used to.
The current implementation still keeps entire .a files mmaped (once) and entire slices from universal files mmaped to ensure that if a client builds their binaries during a debug session we don't lose our data and get corrupt object file info and debug info.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@174524 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 36da2aa6dc5ad9994b638ed09eb81c44cc05540b |
|
25-Jan-2013 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/13069948>
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@173463 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 9482f05e109d617061c1ade6d9672dfcb8427547 |
|
14-Mar-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/11034170>
Simplify the locking strategy for Module and its owned objects to always use the Module's mutex to avoid A/B deadlocks. We had a case where a symbol vendor was locking itself and then calling a function that would try to get it's Module's mutex and at the same time another thread had the Module mutex that was trying to get the SymbolVendor mutex. Now any classes that inherit from ModuleChild should use the module lock using code like:
void
ModuleChildSubclass::Function
{
ModuleSP module_sp(GetModule());
if (module_sp)
{
lldb_private::Mutex::Locker locker(module_sp->GetMutex());
... do work here...
}
}
This will help avoid deadlocks by using as few locks as possible for a module and all its child objects and also enforce detecting if a module has gone away (the ModuleSP will be returned empty if the weak_ptr does refer to a valid object anymore).
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@152679 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 3508c387c3f0c9ecc439d98048fd7694d41bab1b |
|
24-Feb-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/10103468>
I started work on being able to add symbol files after a debug session
had started with a new "target symfile add" command and quickly ran into
problems with stale Address objects in breakpoint locations that had
lldb_private::Section pointers into modules that had been removed or
replaced. This also let to grabbing stale modules from those sections.
So I needed to thread harded the Address, Section and related objects.
To do this I modified the ModuleChild class to now require a ModuleSP
on initialization so that a weak reference can created. I also changed
all places that were handing out "Section *" to have them hand out SectionSP.
All ObjectFile, SymbolFile and SymbolVendors were inheriting from ModuleChild
so all of the find plug-in, static creation function and constructors now
require ModuleSP references instead of Module *.
Address objects now have weak references to their sections which can
safely go stale when a module gets destructed.
This checkin doesn't complete the "target symfile add" command, but it
does get us a lot clioser to being able to do such things without a high
risk of crashing or memory corruption.
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@151336 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| b5a8f1498e1ddaeed5187a878d57ea0b74af9c26 |
|
05-Feb-2012 |
Greg Clayton <gclayton@apple.com> |
<rdar://problem/10560053>
Fixed "target modules list" (aliased to "image list") to output more information
by default. Modified the "target modules list" to have a few new options:
"--header" or "-h" => show the image header address
"--offset" or "-o" => show the image header address offset from the address in the file (the slide applied to the shared library)
Removed the "--symfile-basename" or "-S" option, and repurposed it to
"--symfile-unique" "-S" which will show the symbol file if it differs from
the executable file.
ObjectFile's can now be loaded from memory for cases where we don't have the
files cached locally in an SDK or net mounted root. ObjectFileMachO can now
read mach files from memory.
Moved the section data reading code into the ObjectFile so that the object
file can get the section data from Process memory if the file is only in
memory.
lldb_private::Module can now load its object file in a target with a rigid
slide (very common operation for most dynamic linkers) by using:
bool
Module::SetLoadAddress (Target &target, lldb::addr_t offset, bool &changed)
lldb::SBModule() now has a new constructor in the public interface:
SBModule::SBModule (lldb::SBProcess &process, lldb::addr_t header_addr);
This will find an appropriate ObjectFile plug-in to load an image from memory
where the object file header is at "header_addr".
git-svn-id: https://llvm.org/svn/llvm-project/lldb/trunk@149804 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| 707e340b5d5c302ec72cbf4d922cebac0643ed91 |
|
10-Sep-2011 |
Greg Clayton <gclayton@apple.com> |
Quick fixes to the PE COFF file loader.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139448 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|
| e9f4982716a8b91007af2637bd32e8661e3a9103 |
|
09-Sep-2011 |
Greg Clayton <gclayton@apple.com> |
Added first pass at PE COFF file reading support. It parses the sections
correctly, symbols are coming soon. It also needs to be 32/64 bit hardened
with more testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvdb/trunk@139401 91177308-0d34-0410-b5e6-96231b3b80d8
/external/lldb/source/Plugins/ObjectFile/PECOFF/ObjectFilePECOFF.h
|