| ff761fba8274d93bd73e76c8b8a1f2d0776dd840 |
|
04-Nov-2015 |
Henrik Kjellander <kjellander@webrtc.org> |
modules: more interface -> include renames
This changes the following module directories:
* webrtc/modules/audio_conference_mixer/interface
* webrtc/modules/interface
* webrtc/modules/media_file/interface
* webrtc/modules/rtp_rtcp/interface
* webrtc/modules/utility/interface
To avoid breaking downstream, I followed this recipe:
1. Copy the interface dir to a new sibling directory: include
2. Update the header guards in the include directory to match the style guide.
3. Update the header guards in the interface directory to match the ones in include. This is required to avoid getting redefinitions in the not-yet-updated downstream code.
4. Add a pragma warning in the header files in the interface dir. Example:
#pragma message("WARNING: webrtc/modules/interface is DEPRECATED; "
"use webrtc/modules/include")
5. Search for all source references to webrtc/modules/interface and update them to webrtc/modules/include (*.c*,*.h,*.mm,*.S)
6. Update all GYP+GN files. This required manual inspection since many subdirectories of webrtc/modules referenced the interface dir using ../interface etc(*.gyp*,*.gn*)
BUG=5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417683006 .
Cr-Commit-Position: refs/heads/master@{#10500}
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| dce40cf804019a9898b6ab8d8262466b697c56e0 |
|
24-Aug-2015 |
Peter Kasting <pkasting@google.com> |
Update a ton of audio code to use size_t more correctly and in general reduce
use of int16_t/uint16_t.
This is the upshot of a recommendation by henrik.lundin and kwiberg on an original small change ( https://webrtc-codereview.appspot.com/42569004/#ps1 ) to stop using int16_t just because values could fit in it, and is similar in nature to a previous "mass change to use size_t more" ( https://webrtc-codereview.appspot.com/23129004/ ) which also needed to be split up for review but to land all at once, since, like adding "const", such changes tend to cause a lot of transitive effects.
This was be reviewed and approved in pieces:
https://codereview.webrtc.org/1224093003
https://codereview.webrtc.org/1224123002
https://codereview.webrtc.org/1224163002
https://codereview.webrtc.org/1225133003
https://codereview.webrtc.org/1225173002
https://codereview.webrtc.org/1227163003
https://codereview.webrtc.org/1227203003
https://codereview.webrtc.org/1227213002
https://codereview.webrtc.org/1227893002
https://codereview.webrtc.org/1228793004
https://codereview.webrtc.org/1228803003
https://codereview.webrtc.org/1228823002
https://codereview.webrtc.org/1228823003
https://codereview.webrtc.org/1228843002
https://codereview.webrtc.org/1230693002
https://codereview.webrtc.org/1231713002
The change is being landed as TBR to all the folks who reviewed the above.
BUG=chromium:81439
TEST=none
R=andrew@webrtc.org, pbos@webrtc.org
TBR=aluebs, andrew, asapersson, henrika, hlundin, jan.skoglund, kwiberg, minyue, pbos, pthatcher
Review URL: https://codereview.webrtc.org/1230503003 .
Cr-Commit-Position: refs/heads/master@{#9768}
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| b7e5054414ff524f9db81dab7917729b8c4c8bcb |
|
11-Jun-2015 |
Peter Kasting <pkasting@google.com> |
Match existing type usage better.
This makes a variety of small changes to synchronize bits of code using different types, remove useless code or casts, and add explicit casts in some places previously doing implicit ones. For example:
* Change a few type declarations to better match how the majority of code uses those objects.
* Eliminate "< 0" check for unsigned values.
* Replace "(float)sin(x)", where |x| is also a float, with "sinf(x)", and similar.
* Add casts to uint32_t in many places timestamps were used and the existing code stored signed values into the unsigned objects.
* Remove downcasts when the results would be passed to a larger type, e.g. calling "foo((int16_t)x)" with an int |x| when foo() takes an int instead of an int16_t.
* Similarly, add casts when passing a larger type to a function taking a smaller one.
* Add casts to int16_t when doing something like "int16_t = int16_t + int16_t" as the "+" operation would implicitly upconvert to int, and similar.
* Use "false" instead of "0" for setting a bool.
* Shift a few temp types when doing a multi-stage calculation involving typecasts, so as to put the most logical/semantically correct type possible into the temps. For example, when doing "int foo = int + int; size_t bar = (size_t)foo + size_t;", we might change |foo| to a size_t and move the cast if it makes more sense for |foo| to be represented as a size_t.
BUG=none
R=andrew@webrtc.org, asapersson@webrtc.org, henrika@webrtc.org, juberti@webrtc.org, kwiberg@webrtc.org
TBR=andrew, asapersson, henrika
Review URL: https://codereview.webrtc.org/1168753002
Cr-Commit-Position: refs/heads/master@{#9419}
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| cf808d2366e58b33540931d182f36800d9a15b0d |
|
27-May-2015 |
Henrik Lundin <henrik.lundin@webrtc.org> |
Add new fast mode for NetEq's Accelerate operation
This change instroduces a mode where the Accelerate operation will be
more aggressive. When enabled, it will allow acceleration at lower
correlation levels, and possibly remove multiple pitch periods at
once.
The feature is enabled through NetEq::Config, and is off by
default. This means that bit-exactness tests are currently not
affected.
A unit test was added for the Accelerate class, with and without fast
mode enabled.
BUG=4691
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50039004
Cr-Commit-Position: refs/heads/master@{#9295}
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| 52b42cb069a035f10e951195c28cf6d05d1fd91c |
|
04-Nov-2014 |
henrik.lundin@webrtc.org <henrik.lundin@webrtc.org> |
Fix problem with late packets in NetEq
Since r7255, it could happen that an old packet would block the decoding
process until enough packet was received for the buffer to flush. This
CL fixes that by:
- Partially reverting r7255;
- Remove recent old packets before taking a decision for GetAudio;
- Remove all old packets after a packet has been extracted for decoding;
- Adding tests for reordered packets.
BUG=chrome:423985
R=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/25079004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7612 4adac7df-926f-26a2-2b94-8c16560cd09d
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| 612171527e87e903816b5e169a97a0858a39b50e |
|
22-Sep-2014 |
henrik.lundin@webrtc.org <henrik.lundin@webrtc.org> |
Ensure that NetEq recovers after a large timestamp jump
Before this change it could happen that a large jump in timestamp (a
jump not correlated to wall-clock change) caused the audio to go silent
without recovering. The reason was that all incoming packets after the
jump were considered too old compared to the last decoded packet, and
were deleted. With CL changes two things:
1. If the only available packet in the buffer is an old packet, NetEq
will do Expand instead of immediate reset. This is to avoid that one
late packet triggers a reset.
2. Old packets are discarded only when the decision to decode a packet
has been taken. This is to allow the buffer to grow and eventually
flush if no decodable packet has been found for some time.
This CL also includes a new unit test for this situation.
BUG=3785
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/22709004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7255 4adac7df-926f-26a2-2b94-8c16560cd09d
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| 9c55f0f957534144d2b8a64154f0a479249b34be |
|
09-Jun-2014 |
henrik.lundin@webrtc.org <henrik.lundin@webrtc.org@4adac7df-926f-26a2-2b94-8c16560cd09d> |
Rename neteq4 folder to neteq
Keep the old neteq4/audio_decoder_unittests.isolate while waiting for
a hard-coded reference to change.
This CL effectively reverts r6257 "Rename neteq4 folder to neteq".
BUG=2996
TBR=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21629004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6367 4adac7df-926f-26a2-2b94-8c16560cd09d
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| 1b9df05c8521d1d807b08d7c00eb2f7e5b097fdf |
|
28-May-2014 |
henrik.lundin@webrtc.org <henrik.lundin@webrtc.org@4adac7df-926f-26a2-2b94-8c16560cd09d> |
Revert 6257 "Rename neteq4 folder to neteq"
> Rename neteq4 folder to neteq
>
> BUG=2996
> R=turaj@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/12569005
TBR=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13549004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6259 4adac7df-926f-26a2-2b94-8c16560cd09d
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|
| a90f6d67f72359cf63b59480fa87a13aae808c03 |
|
28-May-2014 |
henrik.lundin@webrtc.org <henrik.lundin@webrtc.org@4adac7df-926f-26a2-2b94-8c16560cd09d> |
Rename neteq4 folder to neteq
BUG=2996
R=turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12569005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6257 4adac7df-926f-26a2-2b94-8c16560cd09d
/external/webrtc/webrtc/modules/audio_coding/neteq/decision_logic_normal.cc
|