| afb0630fd38b3db0e01f243d3112d0b67a93976e |
|
04-Jul-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
qdutils: Parse rotator downscale feature
Parse rotator downscale feature from the capabilities sysfs node
Change-Id: I346a20d4879682e115eb2f8f74afd41dca31e930
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 52c40f737665f00bf9ecd486b9896ce256c94fd2 |
|
02-Jul-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
qdutils: Add getter for 8994
Add version and getter for 8994
Change-Id: I95a8e4518a763651d7ce3865075fac80d4b3c60b
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| e095244acd6350d0898d5a9b409dff2748553bfc |
|
23-May-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: Source Split layers always if indicated by driver
Source Split layers always if the driver indicates so by setting
the src_split_always in the capabilities sysfs node.
This is applicable to layers whose width > mixer's width, since
MDP clk rate is dependent on max(mixer_width, layer_width).
This feature can be enabled if the panel height is more than a
certain empirically derived value. Splitting always in those
cases can help with a lower voltage.
Change-Id: If9b33f11ca4132eb77416c26819f7473c65d3b08
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 514cb6b3f43dd8a3d743cbe68f333898d5e981b8 |
|
25-Apr-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Support single ROI for split panels.
For panels that cannot accept commands in both the interfaces, we cannot
send two ROI's (for each half). We merge them into single ROI and split
them across lSplit for MDP mixer use. The ROI's will be merged again
finally before updating the panel in the driver.
- Reads panel property of dual control path.
- If dual control path not supported, merge ROI's before
analysing for composition strategies.
Change-Id: I67e361a299dc5d1adb28b180900e24633eefc4a8
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 6f7634666209698e4835b9f326278a7068834383 |
|
18-Nov-2013 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Extend partial frame update for split displays
Extends partial frame update support for split displays by calculating
changing region(ROI) independently for each half of the screen. In case of
only one half updating, display driver shuts down the DSI/MDP mixer control
of the non updating half.
Maintains two ROI's for each display. In case of Non-split
displays, only left ROI is updated.
Change-Id: I8a67fe40aac665a48b6f8a46beffb9f8027851b2
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 26ca824f5a1e6adb8038a103c27139c163bb0660 |
|
12-May-2014 |
Prabhanjan Kandula <pkandula@codeaurora.org> |
qdutils : Add mdp revision for 8x39.
Add mdp revision check for 8x39 to facilitate
any target specific checks with in HAL.
Change-Id: I115f4c8e54a11d240d02662eddce86c7528d3b19
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 319441687b340d9963456dc79de5b6e16eaf36b3 |
|
20-Apr-2014 |
Prabhanjan Kandula <pkandula@codeaurora.org> |
hwc : Enable partial update if panel supports it.
Rely on panel info shared by driver and enable
partial update if it says as supported. Use the
existing property to disable partial update if
required for debugging.
Change-Id: I75d5dcbbfea08515d17150054ca91367319b929c
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 29e3491d8c71a426903f0194a9a40a75bde825b3 |
|
05-Apr-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
h/q/d: Read minimum width and height values of the panel ROI
Read minimum width and height restrictions on ROI of a panel
through sysfs node.
Change-Id: I0e4c35cdcaee06e77955725565cfbed2f0fd91e9
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 962c5d172ef0503585834d4bb037a856dd74bb7f |
|
06-Mar-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
libqdutils: Update panel capabilities from sys node
This change adds support to read more panel related informations
from sys node.
Change-Id: I64f37a35945ac700388335059cbb1cfbc9d4b4d7
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 0fdae193307fb17bb537598ab62682edd5138b72 |
|
13-Mar-2014 |
radhakrishna <radhakrishna@codeaurora.org> |
h/q/d: Add utility function for 8x16 and read RGB scalar capability
- Add utility function for 8x16
- Add internal function to identify if RGB doesn't
support scaling that is read from capabilities node.
- If UI layer needs scaling and RGB pipe doesn't
support scalar, request a VG pipe
- On 8x16, request DMA pipe for WFD
Change-Id: I94e8e0371bb10fcad53fddd2b7c45bc9b2594a4d
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| a653efede03423aa840da24634f1ec6f20796f1e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224""
This reverts commit 90268aeae4a80fdce99db4a4e45d696afd4fff36.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| ef53c1c84ec55ed50f607d52b7abfbb86239408e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "split msm8x26 and msm8x74 display HALs apart""
This reverts commit 13236c4d3582dd6f7185a303c4795ea611edbfe3.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 13236c4d3582dd6f7185a303c4795ea611edbfe3 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "split msm8x26 and msm8x74 display HALs apart"
This reverts commit 32d546383b4424a954987570731f7fa216bce206.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 90268aeae4a80fdce99db4a4e45d696afd4fff36 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224"
This reverts commit f96e0b957a215582702db2a5ec6c744afd94eae3.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| f96e0b957a215582702db2a5ec6c744afd94eae3 |
|
28-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224
Change-Id: Ia9af631171fb9ec64de1d1cb0ddf5be3e0fe9132
Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|
| 32d546383b4424a954987570731f7fa216bce206 |
|
18-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
split msm8x26 and msm8x74 display HALs apart
Change-Id: I58a7dc129faa6eef4f7cdc8ee09fd42cd86c189b
Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libqdutils/mdp_version.h
|