1#Uncommenting these urls would only enable
2#the power up auto injection and force injection(test case).
3#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
4#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
5#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
6
7#Version check for XTRA
8#DISABLE = 0
9#AUTO    = 1
10#XTRA2   = 2
11#XTRA3   = 3
12XTRA_VERSION_CHECK=0
13
14# Error Estimate
15# _SET = 1
16# _CLEAR = 0
17ERR_ESTIMATE=0
18
19#Test
20NTP_SERVER=time.gpsonextra.net
21#Asia
22# NTP_SERVER=asia.pool.ntp.org
23#Europe
24# NTP_SERVER=europe.pool.ntp.org
25#North America
26# NTP_SERVER=north-america.pool.ntp.org
27
28# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
29#               4 - Debug, 5 - Verbose
30# If DEBUG_LEVEL is commented, Android's logging levels will be used
31DEBUG_LEVEL = 3
32
33# Intermediate position report, 1=enable, 0=disable
34INTERMEDIATE_POS=0
35
36# Below bit mask configures how GPS functionalities
37# should be locked when user turns off GPS on Settings
38# Set bit 0x1 if MO GPS functionalities are to be locked
39# Set bit 0x2 if NI GPS functionalities are to be locked
40# default - non is locked for backward compatibility
41#GPS_LOCK = 0
42
43# supl version 1.0
44SUPL_VER=0x10000
45
46# Emergency SUPL, 1=enable, 0=disable
47SUPL_ES=1
48
49#Choose PDN for Emergency SUPL
50#1 - Use emergency PDN
51#0 - Use regular SUPL PDN for Emergency SUPL
52USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
53
54#SUPL_MODE is a bit mask set in config.xml per carrier by default.
55#If it is uncommented here, this value will over write the value from
56#config.xml.
57#MSA=0X2
58#MSB=0X1
59#SUPL_MODE=
60
61# GPS Capabilities bit mask
62# SCHEDULING = 0x01
63# MSB = 0x02
64# MSA = 0x04
65# ON_DEMAND_TIME = 0x10
66# GEOFENCE = 0x20
67# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
68CAPABILITIES=0x37
69
70# Accuracy threshold for intermediate positions
71# less accurate positions are ignored, 0 for passing all positions
72# ACCURACY_THRES=5000
73
74################################
75##### AGPS server settings #####
76################################
77
78# FOR SUPL SUPPORT, set the following
79# SUPL_HOST=supl.host.com or IP
80# SUPL_PORT=1234
81
82# FOR C2K PDE SUPPORT, set the following
83# C2K_HOST=c2k.pde.com or IP
84# C2K_PORT=1234
85
86# Bitmask of slots that are available
87# for write/install to, where 1s indicate writable,
88# and the default value is 0 where no slots
89# are writable. For example, AGPS_CERT_WRITABLE_MASK
90# of b1000001010 makes 3 slots available
91# and the remaining 7 slots unwritable.
92#AGPS_CERT_WRITABLE_MASK=0
93
94####################################
95#  LTE Positioning Profile Settings
96####################################
97# 0: Enable RRLP on LTE(Default)
98# 1: Enable LPP_User_Plane on LTE
99# 2: Enable LPP_Control_Plane
100# 3: Enable both LPP_User_Plane and LPP_Control_Plane
101LPP_PROFILE = 0
102
103################################
104# EXTRA SETTINGS
105################################
106# NMEA provider (1=Modem Processor, 0=Application Processor)
107NMEA_PROVIDER=0
108# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
109SGLTE_TARGET=0
110
111##################################################
112# Select Positioning Protocol on A-GLONASS system
113##################################################
114# 0x1: RRC CPlane
115# 0x2: RRLP UPlane
116# 0x4: LLP Uplane
117A_GLONASS_POS_PROTOCOL_SELECT = 0
118