1/****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19/****************************************************************************** 20 * 21 * this file contains the main Bluetooth Manager (BTM) internal 22 * definitions. 23 * 24 ******************************************************************************/ 25#ifndef BTM_INT_H 26#define BTM_INT_H 27 28#include "bt_target.h" 29#include "bt_common.h" 30#include "hcidefs.h" 31 32#include "rfcdefs.h" 33#include "osi/include/alarm.h" 34#include "osi/include/list.h" 35#include "osi/include/fixed_queue.h" 36 37#include "btm_api.h" 38 39#if (BLE_INCLUDED == TRUE) 40#include "btm_ble_int.h" 41#if (SMP_INCLUDED == TRUE) 42#include "smp_api.h" 43#endif 44#endif 45 46#if BTM_MAX_LOC_BD_NAME_LEN > 0 47typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1]; 48#endif 49 50#define BTM_ACL_IS_CONNECTED(bda) (btm_bda_to_acl (bda, BT_TRANSPORT_BR_EDR) != NULL) 51 52/* Definitions for Server Channel Number (SCN) management 53*/ 54#define BTM_MAX_SCN PORT_MAX_RFC_PORTS 55 56/* Define masks for supported and exception 2.0 ACL packet types 57*/ 58#define BTM_ACL_SUPPORTED_PKTS_MASK (HCI_PKT_TYPES_MASK_DM1 | \ 59 HCI_PKT_TYPES_MASK_DH1 | \ 60 HCI_PKT_TYPES_MASK_DM3 | \ 61 HCI_PKT_TYPES_MASK_DH3 | \ 62 HCI_PKT_TYPES_MASK_DM5 | \ 63 HCI_PKT_TYPES_MASK_DH5) 64 65#define BTM_ACL_EXCEPTION_PKTS_MASK (HCI_PKT_TYPES_MASK_NO_2_DH1 | \ 66 HCI_PKT_TYPES_MASK_NO_3_DH1 | \ 67 HCI_PKT_TYPES_MASK_NO_2_DH3 | \ 68 HCI_PKT_TYPES_MASK_NO_3_DH3 | \ 69 HCI_PKT_TYPES_MASK_NO_2_DH5 | \ 70 HCI_PKT_TYPES_MASK_NO_3_DH5) 71 72#define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]) && \ 73 HCI_ATOMIC_ENCRYPT_SUPPORTED(controller_get_interface()->get_features_classic(0)->as_array)) \ 74 ? TRUE : FALSE) 75 76#define BTM_IS_BRCM_CONTROLLER() (controller_get_interface()->get_bt_version()->manufacturer == LMP_COMPID_BROADCOM) 77 78/* Define the ACL Management control structure 79*/ 80typedef struct 81{ 82 UINT16 hci_handle; 83 UINT16 pkt_types_mask; 84 UINT16 clock_offset; 85 BD_ADDR remote_addr; 86 DEV_CLASS remote_dc; 87 BD_NAME remote_name; 88 89 UINT16 manufacturer; 90 UINT16 lmp_subversion; 91 UINT16 link_super_tout; 92 BD_FEATURES peer_lmp_features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Peer LMP Extended features mask table for the device */ 93 UINT8 num_read_pages; 94 UINT8 lmp_version; 95 96 BOOLEAN in_use; 97 UINT8 link_role; 98 BOOLEAN link_up_issued; /* True if busy_level link up has been issued */ 99 100#define BTM_ACL_SWKEY_STATE_IDLE 0 101#define BTM_ACL_SWKEY_STATE_MODE_CHANGE 1 102#define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF 2 103#define BTM_ACL_SWKEY_STATE_SWITCHING 3 104#define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON 4 105#define BTM_ACL_SWKEY_STATE_IN_PROGRESS 5 106 UINT8 switch_role_state; 107 108#define BTM_ACL_ENCRYPT_STATE_IDLE 0 109#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF 1 /* encryption turning off */ 110#define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC 2 /* temporarily off for change link key or role switch */ 111#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON 3 /* encryption turning on */ 112 UINT8 encrypt_state; /* overall BTM encryption state */ 113 114#if BLE_INCLUDED == TRUE 115 tBT_TRANSPORT transport; 116 BD_ADDR conn_addr; /* local device address used for this connection */ 117 UINT8 conn_addr_type; /* local device address type for this connection */ 118 BD_ADDR active_remote_addr; /* remote address used on this connection */ 119 UINT8 active_remote_addr_type; /* local device address type for this connection */ 120 BD_FEATURES peer_le_features; /* Peer LE Used features mask for the device */ 121 122#endif 123 124} tACL_CONN; 125 126/* Define the Device Management control structure 127*/ 128typedef struct 129{ 130 tBTM_DEV_STATUS_CB *p_dev_status_cb; /* Device status change callback */ 131 tBTM_VS_EVT_CB *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS]; /* Register for vendor specific events */ 132 133 tBTM_CMPL_CB *p_stored_link_key_cmpl_cb; /* Read/Write/Delete stored link key */ 134 135 alarm_t *read_local_name_timer; /* Read local name timer */ 136 tBTM_CMPL_CB *p_rln_cmpl_cb; /* Callback function to be called when */ 137 /* read local name function complete */ 138 alarm_t *read_rssi_timer; /* Read RSSI timer */ 139 tBTM_CMPL_CB *p_rssi_cmpl_cb; /* Callback function to be called when */ 140 /* read RSSI function completes */ 141 alarm_t *read_link_quality_timer; 142 tBTM_CMPL_CB *p_link_qual_cmpl_cb; /* Callback function to be called when */ 143 /* read link quality function completes */ 144 145 alarm_t *read_inq_tx_power_timer; 146 tBTM_CMPL_CB *p_inq_tx_power_cmpl_cb; /* Callback function to be called when */ 147 /* read inq tx power function completes */ 148 149 alarm_t *qos_setup_timer; /* QoS setup timer */ 150 tBTM_CMPL_CB *p_qos_setup_cmpl_cb; /* Callback function to be called when */ 151 /* qos setup function completes */ 152 153 tBTM_ROLE_SWITCH_CMPL switch_role_ref_data; 154 tBTM_CMPL_CB *p_switch_role_cb; /* Callback function to be called when */ 155 /* requested switch role is completed */ 156 157 alarm_t *read_tx_power_timer; /* Read tx power timer */ 158 tBTM_CMPL_CB *p_tx_power_cmpl_cb;/* Callback function to be called */ 159 160 DEV_CLASS dev_class; /* Local device class */ 161 162#if BLE_INCLUDED == TRUE 163 164 tBTM_CMPL_CB *p_le_test_cmd_cmpl_cb; /* Callback function to be called when 165 LE test mode command has been sent successfully */ 166 167 BD_ADDR read_tx_pwr_addr; /* read TX power target address */ 168 169#define BTM_LE_SUPPORT_STATE_SIZE 8 170UINT8 le_supported_states[BTM_LE_SUPPORT_STATE_SIZE]; 171 172tBTM_BLE_LOCAL_ID_KEYS id_keys; /* local BLE ID keys */ 173BT_OCTET16 ble_encryption_key_value; /* BLE encryption key */ 174 175#if BTM_BLE_CONFORMANCE_TESTING == TRUE 176 BOOLEAN no_disc_if_pair_fail; 177 BOOLEAN enable_test_mac_val; 178 BT_OCTET8 test_mac; 179 BOOLEAN enable_test_local_sign_cntr; 180 UINT32 test_local_sign_cntr; 181#endif 182 183#endif /* BLE_INCLUDED */ 184 185 tBTM_IO_CAP loc_io_caps; /* IO capability of the local device */ 186 tBTM_AUTH_REQ loc_auth_req; /* the auth_req flag */ 187 BOOLEAN secure_connections_only; /* Rejects service level 0 connections if */ 188 /* itself or peer device doesn't support */ 189 /* secure connections */ 190} tBTM_DEVCB; 191 192 193/* Define the structures and constants used for inquiry 194*/ 195 196/* Definitions of limits for inquiries */ 197#define BTM_PER_INQ_MIN_MAX_PERIOD HCI_PER_INQ_MIN_MAX_PERIOD 198#define BTM_PER_INQ_MAX_MAX_PERIOD HCI_PER_INQ_MAX_MAX_PERIOD 199#define BTM_PER_INQ_MIN_MIN_PERIOD HCI_PER_INQ_MIN_MIN_PERIOD 200#define BTM_PER_INQ_MAX_MIN_PERIOD HCI_PER_INQ_MAX_MIN_PERIOD 201#define BTM_MAX_INQUIRY_LENGTH HCI_MAX_INQUIRY_LENGTH 202#define BTM_MIN_INQUIRY_LEN 0x01 203 204#define BTM_MIN_INQ_TX_POWER -70 205#define BTM_MAX_INQ_TX_POWER 20 206 207typedef struct 208{ 209 UINT32 inq_count; /* Used for determining if a response has already been */ 210 /* received for the current inquiry operation. (We do not */ 211 /* want to flood the caller with multiple responses from */ 212 /* the same device. */ 213 BD_ADDR bd_addr; 214} tINQ_BDADDR; 215 216typedef struct 217{ 218 UINT32 time_of_resp; 219 UINT32 inq_count; /* "timestamps" the entry with a particular inquiry count */ 220 /* Used for determining if a response has already been */ 221 /* received for the current inquiry operation. (We do not */ 222 /* want to flood the caller with multiple responses from */ 223 /* the same device. */ 224 tBTM_INQ_INFO inq_info; 225 BOOLEAN in_use; 226 227#if (BLE_INCLUDED == TRUE) 228 BOOLEAN scan_rsp; 229#endif 230} tINQ_DB_ENT; 231 232 233enum 234{ 235 INQ_NONE, 236 INQ_LE_OBSERVE, 237 INQ_GENERAL 238}; 239typedef UINT8 tBTM_INQ_TYPE; 240 241typedef struct 242{ 243 tBTM_CMPL_CB *p_remname_cmpl_cb; 244 245#define BTM_EXT_RMT_NAME_TIMEOUT_MS (40 * 1000) /* 40 seconds */ 246 247 248 alarm_t *remote_name_timer; 249 250 UINT16 discoverable_mode; 251 UINT16 connectable_mode; 252 UINT16 page_scan_window; 253 UINT16 page_scan_period; 254 UINT16 inq_scan_window; 255 UINT16 inq_scan_period; 256 UINT16 inq_scan_type; 257 UINT16 page_scan_type; /* current page scan type */ 258 tBTM_INQ_TYPE scan_type; 259 260 BD_ADDR remname_bda; /* Name of bd addr for active remote name request */ 261#define BTM_RMT_NAME_INACTIVE 0 262#define BTM_RMT_NAME_EXT 0x1 /* Initiated through API */ 263#define BTM_RMT_NAME_SEC 0x2 /* Initiated internally by security manager */ 264#define BTM_RMT_NAME_INQ 0x4 /* Remote name initiated internally by inquiry */ 265 BOOLEAN remname_active; /* State of a remote name request by external API */ 266 267 tBTM_CMPL_CB *p_inq_cmpl_cb; 268 tBTM_INQ_RESULTS_CB *p_inq_results_cb; 269 tBTM_CMPL_CB *p_inq_ble_cmpl_cb; /*completion callback exclusively for LE Observe*/ 270 tBTM_INQ_RESULTS_CB *p_inq_ble_results_cb;/*results callback exclusively for LE observe*/ 271 tBTM_CMPL_CB *p_inqfilter_cmpl_cb; /* Called (if not NULL) after inquiry filter completed */ 272 UINT32 inq_counter; /* Counter incremented each time an inquiry completes */ 273 /* Used for determining whether or not duplicate devices */ 274 /* have responded to the same inquiry */ 275 tINQ_BDADDR *p_bd_db; /* Pointer to memory that holds bdaddrs */ 276 UINT16 num_bd_entries; /* Number of entries in database */ 277 UINT16 max_bd_entries; /* Maximum number of entries that can be stored */ 278 tINQ_DB_ENT inq_db[BTM_INQ_DB_SIZE]; 279 tBTM_INQ_PARMS inqparms; /* Contains the parameters for the current inquiry */ 280 tBTM_INQUIRY_CMPL inq_cmpl_info; /* Status and number of responses from the last inquiry */ 281 282 UINT16 per_min_delay; /* Current periodic minimum delay */ 283 UINT16 per_max_delay; /* Current periodic maximum delay */ 284 BOOLEAN inqfilt_active; 285 UINT8 pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */ 286 /* inquiry that has been cancelled*/ 287 UINT8 inqfilt_type; /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */ 288 289#define BTM_INQ_INACTIVE_STATE 0 290#define BTM_INQ_CLR_FILT_STATE 1 /* Currently clearing the inquiry filter preceeding the inquiry request */ 291 /* (bypassed if filtering is not used) */ 292#define BTM_INQ_SET_FILT_STATE 2 /* Sets the new filter (or turns off filtering) in this state */ 293#define BTM_INQ_ACTIVE_STATE 3 /* Actual inquiry or periodic inquiry is in progress */ 294#define BTM_INQ_REMNAME_STATE 4 /* Remote name requests are active */ 295 296 UINT8 state; /* Current state that the inquiry process is in */ 297 UINT8 inq_active; /* Bit Mask indicating type of inquiry is active */ 298 BOOLEAN no_inc_ssp; /* TRUE, to stop inquiry on incoming SSP */ 299#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 300 btm_inq_state next_state; /*interleaving state to determine next mode to be inquired*/ 301#endif 302} tBTM_INQUIRY_VAR_ST; 303 304/* The MSB of the clock offset field indicates that the offset is valid if TRUE */ 305#define BTM_CLOCK_OFFSET_VALID 0x8000 306 307/* Define the structures needed by security management 308*/ 309 310#define BTM_SEC_INVALID_HANDLE 0xFFFF 311 312typedef UINT8 *BTM_BD_NAME_PTR; /* Pointer to Device name */ 313 314/* Security callback is called by this unit when security 315** procedures are completed. Parameters are 316** BD Address of remote 317** Result of the operation 318*/ 319typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK; 320 321typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ; 322 323/* MACROs to convert from SCO packet types mask to ESCO and back */ 324#define BTM_SCO_PKT_TYPE_MASK ( HCI_PKT_TYPES_MASK_HV1 \ 325 | HCI_PKT_TYPES_MASK_HV2 \ 326 | HCI_PKT_TYPES_MASK_HV3) 327 328/* Mask defining only the SCO types of an esco packet type */ 329#define BTM_ESCO_PKT_TYPE_MASK ( HCI_ESCO_PKT_TYPES_MASK_HV1 \ 330 | HCI_ESCO_PKT_TYPES_MASK_HV2 \ 331 | HCI_ESCO_PKT_TYPES_MASK_HV3) 332 333#define BTM_SCO_2_ESCO(scotype) ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5)) 334#define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5)) 335 336/* Define masks for supported and exception 2.0 SCO packet types 337*/ 338#define BTM_SCO_SUPPORTED_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_HV1 | \ 339 HCI_ESCO_PKT_TYPES_MASK_HV2 | \ 340 HCI_ESCO_PKT_TYPES_MASK_HV3 | \ 341 HCI_ESCO_PKT_TYPES_MASK_EV3 | \ 342 HCI_ESCO_PKT_TYPES_MASK_EV4 | \ 343 HCI_ESCO_PKT_TYPES_MASK_EV5) 344 345#define BTM_SCO_EXCEPTION_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 | \ 346 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ 347 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 | \ 348 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5) 349 350 351#define BTM_SCO_ROUTE_UNKNOWN 0xff 352 353/* Define the structure that contains (e)SCO data */ 354typedef struct 355{ 356 tBTM_ESCO_CBACK *p_esco_cback; /* Callback for eSCO events */ 357 tBTM_ESCO_PARAMS setup; 358 tBTM_ESCO_DATA data; /* Connection complete information */ 359 UINT8 hci_status; 360} tBTM_ESCO_INFO; 361 362/* Define the structure used for SCO Management 363*/ 364typedef struct 365{ 366 tBTM_ESCO_INFO esco; /* Current settings */ 367#if BTM_SCO_HCI_INCLUDED == TRUE 368 fixed_queue_t *xmit_data_q; /* SCO data transmitting queue */ 369#endif 370 tBTM_SCO_CB *p_conn_cb; /* Callback for when connected */ 371 tBTM_SCO_CB *p_disc_cb; /* Callback for when disconnect */ 372 UINT16 state; /* The state of the SCO link */ 373 UINT16 hci_handle; /* HCI Handle */ 374 BOOLEAN is_orig; /* TRUE if the originator */ 375 BOOLEAN rem_bd_known; /* TRUE if remote BD addr known */ 376 377} tSCO_CONN; 378 379/* SCO Management control block */ 380typedef struct 381{ 382 tBTM_SCO_IND_CBACK *app_sco_ind_cb; 383#if BTM_SCO_HCI_INCLUDED == TRUE 384 tBTM_SCO_DATA_CB *p_data_cb; /* Callback for SCO data over HCI */ 385 UINT32 xmit_window_size; /* Total SCO window in bytes */ 386#endif 387 tSCO_CONN sco_db[BTM_MAX_SCO_LINKS]; 388 tBTM_ESCO_PARAMS def_esco_parms; 389 BD_ADDR xfer_addr; 390 UINT16 sco_disc_reason; 391 BOOLEAN esco_supported; /* TRUE if 1.2 cntlr AND supports eSCO links */ 392 tBTM_SCO_TYPE desired_sco_mode; 393 tBTM_SCO_TYPE xfer_sco_type; 394 tBTM_SCO_PCM_PARAM sco_pcm_param; 395 tBTM_SCO_CODEC_TYPE codec_in_use; /* None, CVSD, MSBC, etc. */ 396#if BTM_SCO_HCI_INCLUDED == TRUE 397 tBTM_SCO_ROUTE_TYPE sco_path; 398#endif 399 400} tSCO_CB; 401 402 403#if BTM_SCO_INCLUDED == TRUE 404extern void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb ); 405extern void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup, 406 tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb); 407extern void btm_reject_sco_link(UINT16 sco_inx ); 408extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle); 409extern void btm_sco_disc_chk_pend_for_modechange (UINT16 hci_handle); 410 411#else 412#define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb) 413#define btm_reject_sco_link(sco_inx) 414#define btm_set_sco_ind_cback(sco_ind_cb) 415#define btm_sco_chk_pend_rolechange(hci_handle) 416#endif /* BTM_SCO_INCLUDED */ 417 418/* 419** Define structure for Security Service Record. 420** A record exists for each service registered with the Security Manager 421*/ 422#define BTM_SEC_OUT_FLAGS (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_OUT_AUTHORIZE) 423#define BTM_SEC_IN_FLAGS (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHORIZE) 424 425#define BTM_SEC_OUT_LEVEL4_FLAGS (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT | \ 426 BTM_SEC_OUT_MITM | BTM_SEC_MODE4_LEVEL4) 427 428#define BTM_SEC_IN_LEVEL4_FLAGS (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT | \ 429 BTM_SEC_IN_MITM | BTM_SEC_MODE4_LEVEL4) 430typedef struct 431{ 432 UINT32 mx_proto_id; /* Service runs over this multiplexer protocol */ 433 UINT32 orig_mx_chan_id; /* Channel on the multiplexer protocol */ 434 UINT32 term_mx_chan_id; /* Channel on the multiplexer protocol */ 435 UINT16 psm; /* L2CAP PSM value */ 436 UINT16 security_flags; /* Bitmap of required security features */ 437 UINT8 service_id; /* Passed in authorization callback */ 438#if (L2CAP_UCD_INCLUDED == TRUE) 439 UINT16 ucd_security_flags; /* Bitmap of required security features for UCD */ 440#endif 441#if BTM_SEC_SERVICE_NAME_LEN > 0 442 UINT8 orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 443 UINT8 term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 444#endif 445} tBTM_SEC_SERV_REC; 446 447#if BLE_INCLUDED == TRUE 448/* LE Security information of device in Slave Role */ 449typedef struct 450{ 451 BT_OCTET16 irk; /* peer diverified identity root */ 452 BT_OCTET16 pltk; /* peer long term key */ 453 BT_OCTET16 pcsrk; /* peer SRK peer device used to secured sign local data */ 454 455 BT_OCTET16 lltk; /* local long term key */ 456 BT_OCTET16 lcsrk; /* local SRK peer device used to secured sign local data */ 457 458 BT_OCTET8 rand; /* random vector for LTK generation */ 459 UINT16 ediv; /* LTK diversifier of this slave device */ 460 UINT16 div; /* local DIV to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1) */ 461 UINT8 sec_level; /* local pairing security level */ 462 UINT8 key_size; /* key size of the LTK delivered to peer device */ 463 UINT8 srk_sec_level; /* security property of peer SRK for this device */ 464 UINT8 local_csrk_sec_level; /* security property of local CSRK for this device */ 465 466 UINT32 counter; /* peer sign counter for verifying rcv signed cmd */ 467 UINT32 local_counter; /* local sign counter for sending signed write cmd*/ 468}tBTM_SEC_BLE_KEYS; 469 470typedef struct 471{ 472 BD_ADDR pseudo_addr; /* LE pseudo address of the device if different from device address */ 473 tBLE_ADDR_TYPE ble_addr_type; /* LE device type: public or random address */ 474 tBLE_ADDR_TYPE static_addr_type; /* static address type */ 475 BD_ADDR static_addr; /* static address */ 476 477#define BTM_WHITE_LIST_BIT 0x01 478#define BTM_RESOLVING_LIST_BIT 0x02 479 UINT8 in_controller_list; /* in controller resolving list or not */ 480 UINT8 resolving_list_index; 481#if BLE_PRIVACY_SPT == TRUE 482 BD_ADDR cur_rand_addr; /* current random address */ 483 484#define BTM_BLE_ADDR_PSEUDO 0 /* address index device record */ 485#define BTM_BLE_ADDR_RRA 1 /* cur_rand_addr */ 486#define BTM_BLE_ADDR_STATIC 2 /* static_addr */ 487 UINT8 active_addr_type; 488#endif 489 490#if SMP_INCLUDED == TRUE 491 tBTM_LE_KEY_TYPE key_type; /* bit mask of valid key types in record */ 492 tBTM_SEC_BLE_KEYS keys; /* LE device security info in slave rode */ 493#endif 494} tBTM_SEC_BLE; 495 496 497#endif /* BLE_INCLUDED */ 498 499/* Peering bond type */ 500enum 501{ 502 BOND_TYPE_UNKNOWN, 503 BOND_TYPE_PERSISTENT, 504 BOND_TYPE_TEMPORARY 505}; 506typedef UINT8 tBTM_BOND_TYPE; 507 508/* 509** Define structure for Security Device Record. 510** A record exists for each device authenticated with this device 511*/ 512typedef struct 513{ 514 tBTM_SEC_SERV_REC *p_cur_service; 515 tBTM_SEC_CALLBACK *p_callback; 516 void *p_ref_data; 517 UINT32 timestamp; /* Timestamp of the last connection */ 518 UINT32 trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE]; /* Bitwise OR of trusted services */ 519 UINT16 hci_handle; /* Handle to connection when exists */ 520 UINT16 clock_offset; /* Latest known clock offset */ 521 BD_ADDR bd_addr; /* BD_ADDR of the device */ 522 DEV_CLASS dev_class; /* DEV_CLASS of the device */ 523 LINK_KEY link_key; /* Device link key */ 524 UINT8 pin_code_length; /* Length of the pin_code used for paring */ 525 526#define BTM_SEC_AUTHORIZED BTM_SEC_FLAG_AUTHORIZED /* 0x01 */ 527#define BTM_SEC_AUTHENTICATED BTM_SEC_FLAG_AUTHENTICATED /* 0x02 */ 528#define BTM_SEC_ENCRYPTED BTM_SEC_FLAG_ENCRYPTED /* 0x04 */ 529#define BTM_SEC_NAME_KNOWN 0x08 530#define BTM_SEC_LINK_KEY_KNOWN BTM_SEC_FLAG_LKEY_KNOWN /* 0x10 */ 531#define BTM_SEC_LINK_KEY_AUTHED BTM_SEC_FLAG_LKEY_AUTHED /* 0x20 */ 532#define BTM_SEC_ROLE_SWITCHED 0x40 533#define BTM_SEC_IN_USE 0x80 534 /* LE link security flag */ 535#define BTM_SEC_LE_AUTHENTICATED 0x0200 /* LE link is encrypted after pairing with MITM */ 536#define BTM_SEC_LE_ENCRYPTED 0x0400 /* LE link is encrypted */ 537#define BTM_SEC_LE_NAME_KNOWN 0x0800 /* not used */ 538#define BTM_SEC_LE_LINK_KEY_KNOWN 0x1000 /* bonded with peer (peer LTK and/or SRK is saved) */ 539#define BTM_SEC_LE_LINK_KEY_AUTHED 0x2000 /* pairing is done with MITM */ 540#define BTM_SEC_16_DIGIT_PIN_AUTHED 0x4000 /* pairing is done with 16 digit pin */ 541 542 UINT16 sec_flags; /* Current device security state */ 543 544 tBTM_BD_NAME sec_bd_name; /* User friendly name of the device. (may be truncated to save space in dev_rec table) */ 545 BD_FEATURES features[HCI_EXT_FEATURES_PAGE_MAX + 1]; /* Features supported by the device */ 546 UINT8 num_read_pages; 547 548#define BTM_SEC_STATE_IDLE 0 549#define BTM_SEC_STATE_AUTHENTICATING 1 550#define BTM_SEC_STATE_ENCRYPTING 2 551#define BTM_SEC_STATE_GETTING_NAME 3 552#define BTM_SEC_STATE_AUTHORIZING 4 553#define BTM_SEC_STATE_SWITCHING_ROLE 5 554#define BTM_SEC_STATE_DISCONNECTING 6 /* disconnecting BR/EDR */ 555#define BTM_SEC_STATE_DELAY_FOR_ENC 7 /* delay to check for encryption to work around */ 556 /* controller problems */ 557#define BTM_SEC_STATE_DISCONNECTING_BLE 8 /* disconnecting BLE */ 558#define BTM_SEC_STATE_DISCONNECTING_BOTH 9 /* disconnecting BR/EDR and BLE */ 559 560 UINT8 sec_state; /* Operating state */ 561 BOOLEAN is_originator; /* TRUE if device is originating connection */ 562#if (L2CAP_UCD_INCLUDED == TRUE) 563 BOOLEAN is_ucd; /* TRUE if device is sending or receiving UCD */ 564 /* if incoming security failed, received UCD will be discarded */ 565#endif 566 BOOLEAN role_master; /* TRUE if current mode is master */ 567 UINT16 security_required; /* Security required for connection */ 568 BOOLEAN link_key_not_sent; /* link key notification has not been sent waiting for name */ 569 UINT8 link_key_type; /* Type of key used in pairing */ 570 BOOLEAN link_key_changed; /* Changed link key during current connection */ 571 572#define BTM_MAX_PRE_SM4_LKEY_TYPE BTM_LKEY_TYPE_REMOTE_UNIT /* the link key type used by legacy pairing */ 573 574#define BTM_SM4_UNKNOWN 0x00 575#define BTM_SM4_KNOWN 0x10 576#define BTM_SM4_TRUE 0x11 577#define BTM_SM4_REQ_PEND 0x08 /* set this bit when getting remote features */ 578#define BTM_SM4_UPGRADE 0x04 /* set this bit when upgrading link key */ 579#define BTM_SM4_RETRY 0x02 /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */ 580#define BTM_SM4_DD_ACP 0x20 /* set this bit to indicate peer initiated dedicated bonding */ 581#define BTM_SM4_CONN_PEND 0x40 /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */ 582 UINT8 sm4; /* BTM_SM4_TRUE, if the peer supports SM4 */ 583 tBTM_IO_CAP rmt_io_caps; /* IO capability of the peer device */ 584 tBTM_AUTH_REQ rmt_auth_req; /* the auth_req flag as in the IO caps rsp evt */ 585 BOOLEAN remote_supports_secure_connections; 586 BOOLEAN remote_features_needed; /* set to true if the local device is in */ 587 /* "Secure Connections Only" mode and it receives */ 588 /* HCI_IO_CAPABILITY_REQUEST_EVT from the peer before */ 589 /* it knows peer's support for Secure Connections */ 590 591 UINT16 ble_hci_handle; /* use in DUMO connection */ 592 UINT8 enc_key_size; /* current link encryption key size */ 593 tBT_DEVICE_TYPE device_type; 594 BOOLEAN new_encryption_key_is_p256; /* Set to TRUE when the newly generated LK 595 ** is generated from P-256. 596 ** Link encrypted with such LK can be used 597 ** for SM over BR/EDR. 598 */ 599 BOOLEAN no_smp_on_br; /* if set to TRUE then SMP on BR/EDR doesn't */ 600 /* work, i.e. link keys crosspairing */ 601 /* SC BR/EDR->SC LE doesn't happen */ 602 tBTM_BOND_TYPE bond_type; /* peering bond type */ 603 604#if BLE_INCLUDED == TRUE 605 tBTM_SEC_BLE ble; 606 tBTM_LE_CONN_PRAMS conn_params; 607#endif 608 609#if BTM_DISC_DURING_RS == TRUE 610#define BTM_SEC_RS_NOT_PENDING 0 /* Role Switch not in progress */ 611#define BTM_SEC_RS_PENDING 1 /* Role Switch in progress */ 612#define BTM_SEC_DISC_PENDING 2 /* Disconnect is pending */ 613 UINT8 rs_disc_pending; 614#endif 615#define BTM_SEC_NO_LAST_SERVICE_ID 0 616 UINT8 last_author_service_id; /* ID of last serviced authorized: Reset after each l2cap connection */ 617 618} tBTM_SEC_DEV_REC; 619 620#define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE))) 621#define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE))) 622#define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE))) 623 624#define BTM_SEC_LE_MASK (BTM_SEC_LE_AUTHENTICATED|BTM_SEC_LE_ENCRYPTED|BTM_SEC_LE_LINK_KEY_KNOWN|BTM_SEC_LE_LINK_KEY_AUTHED) 625 626/* 627** Define device configuration structure 628*/ 629typedef struct 630{ 631#if BTM_MAX_LOC_BD_NAME_LEN > 0 632 tBTM_LOC_BD_NAME bd_name; /* local Bluetooth device name */ 633#endif 634 BOOLEAN pin_type; /* TRUE if PIN type is fixed */ 635 UINT8 pin_code_len; /* Bonding information */ 636 PIN_CODE pin_code; /* PIN CODE if pin type is fixed */ 637 BOOLEAN connectable; /* If TRUE page scan should be enabled */ 638 UINT8 def_inq_scan_mode; /* ??? limited/general/none */ 639} tBTM_CFG; 640 641enum 642{ 643 BTM_PM_ST_ACTIVE = BTM_PM_STS_ACTIVE, 644 BTM_PM_ST_HOLD = BTM_PM_STS_HOLD, 645 BTM_PM_ST_SNIFF = BTM_PM_STS_SNIFF, 646 BTM_PM_ST_PARK = BTM_PM_STS_PARK, 647 BTM_PM_ST_PENDING = BTM_PM_STS_PENDING, 648 BTM_PM_ST_INVALID = 0xFF 649}; 650typedef UINT8 tBTM_PM_STATE; 651 652enum 653{ 654 BTM_PM_SET_MODE_EVT, /* Set power mode API is called. */ 655 BTM_PM_UPDATE_EVT, 656 BTM_PM_RD_MODE_EVT /* Read power mode API is called. */ 657}; 658typedef UINT8 tBTM_PM_EVENT; 659 660typedef struct 661{ 662 UINT16 event; 663 UINT16 len; 664 UINT8 link_ind; 665} tBTM_PM_MSG_DATA; 666 667typedef struct 668{ 669 UINT8 hci_status; 670 UINT8 mode; 671 UINT16 interval; 672} tBTM_PM_MD_CHG_DATA; 673 674typedef struct 675{ 676 UINT8 pm_id; /* the entity that calls SetPowerMode API */ 677 tBTM_PM_PWR_MD *p_pmd; 678} tBTM_PM_SET_MD_DATA; 679 680typedef struct 681{ 682 void *p_data; 683 UINT8 link_ind; 684} tBTM_PM_SM_DATA; 685 686typedef struct 687{ 688 tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/ 689 tBTM_PM_PWR_MD set_mode; /* the mode and parameters sent down to the host controller. */ 690 UINT16 interval; /* the interval from last mode change event. */ 691#if (BTM_SSR_INCLUDED == TRUE) 692 UINT16 max_lat; /* stored SSR maximum latency */ 693 UINT16 min_rmt_to;/* stored SSR minimum remote timeout */ 694 UINT16 min_loc_to;/* stored SSR minimum local timeout */ 695#endif 696 tBTM_PM_STATE state; /* contains the current mode of the connection */ 697 BOOLEAN chg_ind; /* a request change indication */ 698} tBTM_PM_MCB; 699 700#define BTM_PM_REC_NOT_USED 0 701typedef struct 702{ 703 tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */ 704 UINT8 mask; /* registered request mask. 0, if this entry is not used */ 705} tBTM_PM_RCB; 706 707enum 708{ 709 BTM_BLI_ACL_UP_EVT, 710 BTM_BLI_ACL_DOWN_EVT, 711 BTM_BLI_PAGE_EVT, 712 BTM_BLI_PAGE_DONE_EVT, 713 BTM_BLI_INQ_EVT, 714 BTM_BLI_INQ_CANCEL_EVT, 715 BTM_BLI_INQ_DONE_EVT 716}; 717typedef UINT8 tBTM_BLI_EVENT; 718 719/* Pairing State */ 720enum 721{ 722 BTM_PAIR_STATE_IDLE, /* Idle */ 723 BTM_PAIR_STATE_GET_REM_NAME, /* Getting the remote name (to check for SM4) */ 724 BTM_PAIR_STATE_WAIT_PIN_REQ, /* Started authentication, waiting for PIN req (PIN is pre-fetched) */ 725 BTM_PAIR_STATE_WAIT_LOCAL_PIN, /* Waiting for local PIN code */ 726 BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM, /* Waiting user 'yes' to numeric confirmation */ 727 BTM_PAIR_STATE_KEY_ENTRY, /* Key entry state (we are a keyboard) */ 728 BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP, /* Waiting for local response to peer OOB data */ 729 BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS, /* Waiting for local IO capabilities and OOB data */ 730 BTM_PAIR_STATE_INCOMING_SSP, /* Incoming SSP (got peer IO caps when idle) */ 731 BTM_PAIR_STATE_WAIT_AUTH_COMPLETE, /* All done, waiting authentication cpmplete */ 732 BTM_PAIR_STATE_WAIT_DISCONNECT /* Waiting to disconnect the ACL */ 733}; 734typedef UINT8 tBTM_PAIRING_STATE; 735 736#define BTM_PAIR_FLAGS_WE_STARTED_DD 0x01 /* We want to do dedicated bonding */ 737#define BTM_PAIR_FLAGS_PEER_STARTED_DD 0x02 /* Peer initiated dedicated bonding */ 738#define BTM_PAIR_FLAGS_DISC_WHEN_DONE 0x04 /* Disconnect when done */ 739#define BTM_PAIR_FLAGS_PIN_REQD 0x08 /* set this bit when pin_callback is called */ 740#define BTM_PAIR_FLAGS_PRE_FETCH_PIN 0x10 /* set this bit when pre-fetch pin */ 741#define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20 /* set this bit when rejected incoming connection */ 742#define BTM_PAIR_FLAGS_WE_CANCEL_DD 0x40 /* set this bit when cancelling a bonding procedure */ 743#define BTM_PAIR_FLAGS_LE_ACTIVE 0x80 /* use this bit when SMP pairing is active */ 744 745 746typedef struct 747{ 748 BOOLEAN is_mux; 749 BD_ADDR bd_addr; 750 UINT16 psm; 751 BOOLEAN is_orig; 752 tBTM_SEC_CALLBACK *p_callback; 753 void *p_ref_data; 754 UINT32 mx_proto_id; 755 UINT32 mx_chan_id; 756 tBT_TRANSPORT transport; 757 tBTM_BLE_SEC_ACT sec_act; 758} tBTM_SEC_QUEUE_ENTRY; 759 760#if (L2CAP_UCD_INCLUDED == TRUE) 761 762#define CONN_ORIENT_TERM 0x00 /* incoming connection oriented */ 763#define CONN_ORIENT_ORIG 0x01 /* outgoing connection oriented */ 764#define CONNLESS_TERM 0x02 /* incoming connectionless */ 765#define CONNLESS_ORIG 0x03 /* outgoing connectionless */ 766#define CONNECTION_TYPE_ORIG_MASK 0x01 /* mask for direction */ 767#define CONNECTION_TYPE_CONNLESS_MASK 0x02 /* mask for connectionless or not */ 768typedef UINT8 CONNECTION_TYPE; 769 770#else 771 772#define CONN_ORIENT_TERM FALSE 773#define CONN_ORIENT_ORIG TRUE 774typedef BOOLEAN CONNECTION_TYPE; 775 776#endif /* (L2CAP_UCD_INCLUDED == TRUE) */ 777 778/* Define a structure to hold all the BTM data 779*/ 780 781#define BTM_STATE_BUFFER_SIZE 5 /* size of state buffer */ 782 783typedef struct 784{ 785 tBTM_CFG cfg; /* Device configuration */ 786 787 /**************************************************** 788 ** ACL Management 789 ****************************************************/ 790 tACL_CONN acl_db[MAX_L2CAP_LINKS]; 791 UINT8 btm_scn[BTM_MAX_SCN]; /* current SCNs: TRUE if SCN is in use */ 792 UINT16 btm_def_link_policy; 793 UINT16 btm_def_link_super_tout; 794 795 tBTM_BL_EVENT_MASK bl_evt_mask; 796 tBTM_BL_CHANGE_CB *p_bl_changed_cb; /* Callback for when Busy Level changed */ 797 798 /**************************************************** 799 ** Power Management 800 ****************************************************/ 801 tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS]; /* per ACL link */ 802 tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */ 803 UINT8 pm_pend_link; /* the index of acl_db, which has a pending PM cmd */ 804 UINT8 pm_pend_id; /* the id pf the module, which has a pending PM cmd */ 805 806 /***************************************************** 807 ** Device control 808 *****************************************************/ 809 tBTM_DEVCB devcb; 810 811 /***************************************************** 812 ** BLE Device controllers 813 *****************************************************/ 814#if (BLE_INCLUDED == TRUE) 815 tBTM_BLE_CB ble_ctr_cb; 816 817 UINT16 enc_handle; 818 BT_OCTET8 enc_rand; /* received rand value from LTK request*/ 819 UINT16 ediv; /* received ediv value from LTK request */ 820 UINT8 key_size; 821 tBTM_BLE_VSC_CB cmn_ble_vsc_cb; 822#endif 823 824 /* Packet types supported by the local device */ 825 UINT16 btm_acl_pkt_types_supported; 826 UINT16 btm_sco_pkt_types_supported; 827 828 829 /***************************************************** 830 ** Inquiry 831 *****************************************************/ 832 tBTM_INQUIRY_VAR_ST btm_inq_vars; 833 834 /***************************************************** 835 ** SCO Management 836 *****************************************************/ 837#if BTM_SCO_INCLUDED == TRUE 838 tSCO_CB sco_cb; 839#endif 840 841 /***************************************************** 842 ** Security Management 843 *****************************************************/ 844 tBTM_APPL_INFO api; 845 846#define BTM_SEC_MAX_RMT_NAME_CALLBACKS 2 847 tBTM_RMT_NAME_CALLBACK *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS]; 848 849 tBTM_SEC_DEV_REC *p_collided_dev_rec; 850 alarm_t *sec_collision_timer; 851 UINT32 collision_start_time; 852 UINT32 max_collision_delay; 853 UINT32 dev_rec_count; /* Counter used for device record timestamp */ 854 UINT8 security_mode; 855 BOOLEAN pairing_disabled; 856 BOOLEAN connect_only_paired; 857 BOOLEAN security_mode_changed; /* mode changed during bonding */ 858 BOOLEAN pin_type_changed; /* pin type changed during bonding */ 859 BOOLEAN sec_req_pending; /* TRUE if a request is pending */ 860 861 UINT8 pin_code_len; /* for legacy devices */ 862 PIN_CODE pin_code; /* for legacy devices */ 863 tBTM_PAIRING_STATE pairing_state; /* The current pairing state */ 864 UINT8 pairing_flags; /* The current pairing flags */ 865 BD_ADDR pairing_bda; /* The device currently pairing */ 866 alarm_t *pairing_timer; /* Timer for pairing process */ 867 UINT16 disc_handle; /* for legacy devices */ 868 UINT8 disc_reason; /* for legacy devices */ 869 tBTM_SEC_SERV_REC sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS]; 870 list_t *sec_dev_rec; /* list of tBTM_SEC_DEV_REC */ 871 tBTM_SEC_SERV_REC *p_out_serv; 872 tBTM_MKEY_CALLBACK *mkey_cback; 873 874 BD_ADDR connecting_bda; 875 DEV_CLASS connecting_dc; 876 877 UINT8 acl_disc_reason; 878 UINT8 trace_level; 879 UINT8 busy_level; /* the current busy level */ 880 BOOLEAN is_paging; /* TRUE, if paging is in progess */ 881 BOOLEAN is_inquiry; /* TRUE, if inquiry is in progess */ 882 fixed_queue_t *page_queue; 883 BOOLEAN paging; 884 BOOLEAN discing; 885 fixed_queue_t *sec_pending_q; /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */ 886 887#if (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE)) 888 char state_temp_buffer[BTM_STATE_BUFFER_SIZE]; 889#endif 890} tBTM_CB; 891 892/* security action for L2CAP COC channels */ 893#define BTM_SEC_OK 1 894#define BTM_SEC_ENCRYPT 2 /* encrypt the link with current key */ 895#define BTM_SEC_ENCRYPT_NO_MITM 3 /* unauthenticated encryption or better */ 896#define BTM_SEC_ENCRYPT_MITM 4 /* authenticated encryption */ 897#define BTM_SEC_ENC_PENDING 5 /* wait for link encryption pending */ 898 899typedef UINT8 tBTM_SEC_ACTION; 900 901#ifdef __cplusplus 902extern "C" 903{ 904#endif 905 906#if BTM_DYNAMIC_MEMORY == FALSE 907extern tBTM_CB btm_cb; 908#else 909extern tBTM_CB *btm_cb_ptr; 910#define btm_cb (*btm_cb_ptr) 911#endif 912 913/* Internal functions provided by btm_main.c 914******************************************** 915*/ 916extern void btm_init (void); 917 918/* Internal functions provided by btm_inq.c 919******************************************* 920*/ 921extern tBTM_STATUS btm_initiate_rem_name(BD_ADDR remote_bda, 922 tBTM_INQ_INFO *p_cur, 923 UINT8 origin, period_ms_t timeout_ms, 924 tBTM_CMPL_CB *p_cb); 925 926extern void btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len, 927 UINT8 hci_status); 928extern void btm_inq_rmt_name_failed(void); 929extern void btm_inq_remote_name_timer_timeout(void *data); 930 931/* Inquiry related functions */ 932extern void btm_clr_inq_db (BD_ADDR p_bda); 933extern void btm_inq_db_init (void); 934extern void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode); 935extern void btm_process_inq_complete (UINT8 status, UINT8 mode); 936extern void btm_process_cancel_complete(UINT8 status, UINT8 mode); 937extern void btm_event_filter_complete (UINT8 *p); 938extern void btm_inq_stop_on_ssp(void); 939extern void btm_inq_clear_ssp(void); 940extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda); 941extern BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda); 942 943extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr); 944 945/* Internal functions provided by btm_acl.c 946******************************************** 947*/ 948extern void btm_acl_init (void); 949extern void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, 950 UINT16 hci_handle, UINT8 link_role, tBT_TRANSPORT transport); 951extern void btm_acl_removed (BD_ADDR bda, tBT_TRANSPORT transport); 952extern void btm_acl_device_down (void); 953extern void btm_acl_update_busy_level (tBTM_BLI_EVENT event); 954 955extern void btm_cont_rswitch (tACL_CONN *p, 956 tBTM_SEC_DEV_REC *p_dev_rec, 957 UINT8 hci_status); 958 959extern UINT8 btm_handle_to_acl_index (UINT16 hci_handle); 960extern void btm_read_link_policy_complete (UINT8 *p); 961 962extern void btm_read_rssi_timeout(void *data); 963extern void btm_read_rssi_complete(UINT8 *p); 964 965extern void btm_read_tx_power_timeout(void *data); 966extern void btm_read_tx_power_complete(UINT8 *p, BOOLEAN is_ble); 967 968extern void btm_read_link_quality_timeout(void *data); 969extern void btm_read_link_quality_complete(UINT8 *p); 970 971extern tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types); 972extern void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset); 973extern void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role); 974extern void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 975extern UINT16 btm_get_acl_disc_reason_code (void); 976extern tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr, tBT_TRANSPORT transport); 977extern void btm_read_remote_features_complete (UINT8 *p); 978extern void btm_read_remote_ext_features_complete (UINT8 *p); 979extern void btm_read_remote_ext_features_failed (UINT8 status, UINT16 handle); 980extern void btm_read_remote_version_complete (UINT8 *p); 981extern void btm_establish_continue (tACL_CONN *p_acl_cb); 982 983extern void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type); 984/* Read maximum data packet that can be sent over current connection */ 985extern UINT16 btm_get_max_packet_size (BD_ADDR addr); 986extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda, tBT_TRANSPORT transport); 987extern BOOLEAN btm_acl_notif_conn_collision (BD_ADDR bda); 988 989extern void btm_pm_reset(void); 990extern void btm_pm_sm_alloc(UINT8 ind); 991extern void btm_pm_proc_cmd_status(UINT8 status); 992extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 993 UINT16 interval); 994extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len); 995extern tBTM_STATUS btm_read_power_mode_state (BD_ADDR remote_bda, 996 tBTM_PM_STATE *pmState); 997#if BTM_SCO_INCLUDED == TRUE 998extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle); 999#else 1000#define btm_sco_chk_pend_unpark(hci_status, hci_handle) 1001#endif /* BTM_SCO_INCLUDED */ 1002 1003extern void btm_qos_setup_timeout(void *data); 1004extern void btm_qos_setup_complete(UINT8 status, UINT16 handle, 1005 FLOW_SPEC *p_flow); 1006 1007 1008/* Internal functions provided by btm_sco.c 1009******************************************** 1010*/ 1011extern void btm_sco_init (void); 1012extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle, 1013 tBTM_ESCO_DATA *p_esco_data); 1014extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval, 1015 UINT8 retrans_window, UINT16 rx_pkt_len, 1016 UINT16 tx_pkt_len); 1017extern void btm_sco_conn_req (BD_ADDR bda, DEV_CLASS dev_class, UINT8 link_type); 1018extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason); 1019extern void btm_sco_acl_removed (BD_ADDR bda); 1020extern void btm_route_sco_data (BT_HDR *p_msg); 1021extern BOOLEAN btm_is_sco_active (UINT16 handle); 1022extern void btm_remove_sco_links (BD_ADDR bda); 1023extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda); 1024 1025extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms); 1026extern UINT16 btm_find_scb_by_handle (UINT16 handle); 1027extern void btm_sco_flush_sco_data(UINT16 sco_inx); 1028 1029/* Internal functions provided by btm_devctl.c 1030********************************************** 1031*/ 1032extern void btm_dev_init(void); 1033extern void btm_read_local_name_timeout(void *data); 1034extern void btm_read_local_name_complete(UINT8 *p, UINT16 evt_len); 1035 1036#if (BLE_INCLUDED == TRUE) 1037extern void btm_ble_add_2_white_list_complete(UINT8 status); 1038extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); 1039extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); 1040extern BOOLEAN btm_ble_addr_resolvable(BD_ADDR rpa, tBTM_SEC_DEV_REC *p_dev_rec); 1041extern tBTM_STATUS btm_ble_read_resolving_list_entry(tBTM_SEC_DEV_REC *p_dev_rec); 1042extern BOOLEAN btm_ble_resolving_list_load_dev(tBTM_SEC_DEV_REC *p_dev_rec); 1043extern void btm_ble_resolving_list_remove_dev(tBTM_SEC_DEV_REC *p_dev_rec); 1044#endif /* BLE_INCLUDED */ 1045 1046/* Vendor Specific Command complete evt handler */ 1047extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len, 1048 tBTM_CMPL_CB *p_vsc_cplt_cback); 1049extern void btm_inq_db_reset (void); 1050extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len); 1051extern void btm_delete_stored_link_key_complete (UINT8 *p); 1052extern void btm_report_device_status (tBTM_DEV_STATUS status); 1053 1054 1055/* Internal functions provided by btm_dev.c 1056********************************************** 1057*/ 1058extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1059 1060extern tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr); 1061extern void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec); 1062extern tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr); 1063extern tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr); 1064extern tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle); 1065extern tBTM_BOND_TYPE btm_get_bond_type_dev(BD_ADDR bd_addr); 1066extern BOOLEAN btm_set_bond_type_dev(BD_ADDR bd_addr, 1067 tBTM_BOND_TYPE bond_type); 1068 1069/* Internal functions provided by btm_sec.c 1070********************************************** 1071*/ 1072extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1073extern tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, 1074 UINT16 handle, CONNECTION_TYPE conn_type, 1075 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1076extern tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, 1077 UINT32 mx_proto_id, UINT32 mx_chan_id, 1078 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1079extern void btm_sec_conn_req (UINT8 *bda, UINT8 *dc); 1080extern void btm_create_conn_cancel_complete (UINT8 *p); 1081 1082extern void btm_read_inq_tx_power_timeout(void *data); 1083extern void btm_read_inq_tx_power_complete(UINT8 *p); 1084 1085extern void btm_sec_init (UINT8 sec_mode); 1086extern void btm_sec_dev_reset (void); 1087extern void btm_sec_abort_access_req (BD_ADDR bd_addr); 1088extern void btm_sec_auth_complete (UINT16 handle, UINT8 status); 1089extern void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 1090extern void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode); 1091extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason); 1092extern void btm_sec_disconnected (UINT16 handle, UINT8 reason); 1093extern void btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status); 1094extern void btm_sec_rmt_host_support_feat_evt (UINT8 *p); 1095extern void btm_io_capabilities_req (UINT8 *p); 1096extern void btm_io_capabilities_rsp (UINT8 *p); 1097extern void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p); 1098extern void btm_keypress_notif_evt (UINT8 *p); 1099extern void btm_simple_pair_complete (UINT8 *p); 1100extern void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type); 1101extern void btm_sec_link_key_request (UINT8 *p_bda); 1102extern void btm_sec_pin_code_request (UINT8 *p_bda); 1103extern void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset); 1104extern void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res, BOOLEAN is_le_trasnport); 1105extern void btm_sec_set_peer_sec_caps (tACL_CONN *p_acl_cb, tBTM_SEC_DEV_REC *p_dev_rec); 1106 1107#if BLE_INCLUDED == TRUE 1108extern void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC *p_dev_rec); 1109extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda); 1110extern void btm_consolidate_dev(tBTM_SEC_DEV_REC *p_target_rec); 1111extern BOOLEAN btm_sec_is_le_capable_dev (BD_ADDR bda); 1112extern BOOLEAN btm_ble_init_pseudo_addr (tBTM_SEC_DEV_REC *p_dev_rec, BD_ADDR new_pseudo_addr); 1113extern tBTM_SEC_SERV_REC *btm_sec_find_first_serv (CONNECTION_TYPE conn_type, UINT16 psm); 1114extern BOOLEAN btm_ble_start_sec_check(BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, 1115 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1116#endif /* BLE_INCLUDED */ 1117 1118extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda); 1119 1120extern void btm_rem_oob_req (UINT8 *p); 1121extern void btm_read_local_oob_complete (UINT8 *p); 1122 1123extern void btm_acl_resubmit_page (void); 1124extern void btm_acl_reset_paging (void); 1125extern void btm_acl_paging (BT_HDR *p, BD_ADDR dest); 1126extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm); 1127extern void btm_sec_clr_temp_auth_service (BD_ADDR bda); 1128 1129#ifdef __cplusplus 1130} 1131#endif 1132 1133#endif 1134