| e0ed7404719a9ddd2ba427a80db5365c8bad18c0 |
|
20-Mar-2014 |
JP Abgrall <jpa@google.com> |
Switch back to 1.42.9 now that there is a fix
Revert "Revert changes that moved from 1.41.14 to 1.42.9"
This reverts commit 65f0aab98b20b5994a726ab90d355248bcddfffd.
/external/e2fsprogs/e2fsck/ehandler.c
|
| 65f0aab98b20b5994a726ab90d355248bcddfffd |
|
06-Mar-2014 |
JP Abgrall <jpa@google.com> |
Revert changes that moved from 1.41.14 to 1.42.9
Revert "e2fsck: Don't use e2fsck_global_ctx unless HAVE_SIGNAL_H"
commit e80e74c41d85ff93f3d212ba6512340f48054a93.
Revert "Merge remote-tracking branch 'linaro/linaro-1.42.9' into aosp_master"
This reverts commit e97b2b6fc82f840e84dfc631b87f21be44ff2421, reversing
changes made to 7e2fb9d09c245eba70ee008b78007315e9c0f1df.
Revert "Prepare for upstream 1.42.9"
This reverts commit 7e2fb9d09c245eba70ee008b78007315e9c0f1df.
Bug: 13340735
Change-Id: If48b153a95ef5f69f7cdccb00e23524abff3c5a8
Signed-off-by: JP Abgrall <jpa@google.com>
/external/e2fsprogs/e2fsck/ehandler.c
|
| 18a1444b4f1e6a0948fd38fa0de382d86cfe04de |
|
31-Dec-2013 |
Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org> |
Add files that would normally be generated by the e2fsprogs build system
Android doesn't run ./configure and friends, so it has to rely on
pre-populated versions of the autogenerated files.
This is somewhat bogus (e.g. hardcoded little-endian reference in
lib/ext2fs/ext2_types.h) and should at some point be fixed, but it's
what Android has always done, not a regression from the 1.41.14 branch.
Also, don't #include config.h which we don't generate (we pass what it
usually contains as -D parameters from Android.mk) anywhere.
Add a new Android.mk file for the quota library.
Change-Id: I162c6327fee5bd06261d9cdcc34bda10f04a6f21
Signed-off-by: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
/external/e2fsprogs/e2fsck/ehandler.c
|
| d45b67c5f2a66597d8e2915052e180203a9193b8 |
|
07-Aug-2012 |
Jim Keniston <jkenisto@us.ibm.com> |
e2fsck: fix potential segv when handling a read error in a superblock
When passed a negative count (indicating a byte count rather than
a block count) e2fsck_handle_read_error() treats the data as a full
block, causing unix_write_blk64() (which can handle negative counts
just fine) to try to write too much. Given a faulty block device,
this resulted in a SEGV when unix_write_blk64() read past the bottom
of the stack copying the data to cache. (check_backup_super_block ->
unix_read_blk64 -> raw_read_blk -> e2fsck_handle_read_error)
Reported-by: Alex Friedman <alexfr@il.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Dan Streetman <ddstreet@us.ibm.com>
Reviewed-by: Mingming Cao <mcao@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
/external/e2fsprogs/e2fsck/ehandler.c
|
| d1154eb460efe588eaed3d439c1caaca149fa362 |
|
18-Sep-2011 |
Theodore Ts'o <tytso@mit.edu> |
Shorten compile commands run by the build system
The DEFS line in MCONFIG had gotten so long that it exceeded 4k, and
this was starting to cause some tools heartburn. It also made "make
V=1" almost useless, since trying to following the individual commands
run by make was lost in the noise of all of the defines.
So fix this by putting the configure-generated defines in lib/config.h
and the directory pathnames to lib/dirpaths.h.
In addition, clean up some vestigal defines in configure.in and in the
Makefiles to further shorten the cc command lines.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/e2fsck/ehandler.c
|
| 24a117abd0340d247befbf7687ffb70547fdf218 |
|
08-Sep-2009 |
Valerie Aurora Henson <vaurora@redhat.com> |
Convert to use io_channel_read_blk64() and io_channel_write_blk64()
Signed-off-by: Valerie Aurora Henson <vaurora@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/e2fsck/ehandler.c
|
| 79cc33628256e817610e921ddf600f72e4f879e1 |
|
11-Oct-2008 |
Eric Sandeen <sandeen@redhat.com> |
e2fsck: exit from preenhalt if IO errors were encountered
If a block device is read-only, e2fsck -p gets into an infinite loop
trying to preenhalt, closing and flushing the fs, which tries to flush
the cache, which gets a write error and calls preenhalt which tries to
close and flush the fs ... ad infinitum.
Per Ted's suggestion just flag the ctx as "exiting" and short-circuit
the infinite loop.
Tested by running e2fsck -p on a block device set read-only by BLKROSET.
Thanks to Vlado Potisk for reporting this.
Addresses-Red-Hat-Bugzilla: #465679
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
/external/e2fsprogs/e2fsck/ehandler.c
|
| efc6f628e15de95bcd13e4f0ee223cb42115d520 |
|
28-Aug-2008 |
Theodore Ts'o <tytso@mit.edu> |
Remove trailing whitespace for the entire source tree
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
/external/e2fsprogs/e2fsck/ehandler.c
|
| 544349270e4c74a6feb971123884a8cf5052a7ee |
|
07-Dec-2003 |
Theodore Ts'o <tytso@mit.edu> |
Fix gcc -Wall nitpicks
/external/e2fsprogs/e2fsck/ehandler.c
|
| ceecbc75c3bf90abf288338bde3037015681f8b8 |
|
31-Aug-2002 |
Theodore Ts'o <tytso@mit.edu> |
ehandler.c (e2fsck_handle_read_error): If the user asks to
ignore the error, offer to try forcing a write of the
block to the disk; sometimes this will cause the drive to
remap the bad block.
/external/e2fsprogs/e2fsck/ehandler.c
|
| 0c4a07264e55b42c6e30230e66b1dea7d4b94ea9 |
|
07-Feb-2000 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
badblocks.c, e2fsck.h, ehandler.c, emptydir.c, extend.c, flushb.c,
iscan.c, message.c, pass1.c, pass1b.c, pass3.c pass4.c, pass5.c,
problem.c, scantest.c, swapfs.c, unix.c, util.c: Add
Internationalization support as suggested by Marco d'Itri
<md@linux.it>.
/external/e2fsprogs/e2fsck/ehandler.c
|
| 54dc7ca2869897ae8cb81a9ab9880ebff11680bc |
|
19-Jan-1998 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
e2fsck.h: If EXT2_FLAT_INCLUDES is defined, then assume all of
the ext2-specific header files are in a flat directory.
dirinfo.c, ehandler.c, pass1.c, pass1b.c, pass2.c, pass5.c,
super.c, swapfs.c, unix.c: Explicitly cast all assignments
from void * to be compatible with C++.
unix.c (sync_disk): Remove sync_disk and calls to that function,
since ext2fs_close() now takes care of this.
pass1.c, pass1b.c, pass2.c, pass3.c, swapfs, badblocks.c,
ehandler.c, unix.c: Change use of private to be priv_data, to
avoid C++ reserved name clash.
/external/e2fsprogs/e2fsck/ehandler.c
|
| 1b6bf1759af884957234b7dce768b785f792abd0 |
|
03-Oct-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
pass*.c, super.c: Massive changes to avoid using printf and com_err
routines. All diagnostic messages are now routed through the
fix_problem interface.
pass2.c (check_dir_block): Check for duplicate '.' and '..' entries.
problem.c, problem.h: Add new problem codes PR_2_DUP_DOT and
PR_2_DUP_DOT_DOT.
problem.c: Added new problem codes for some of the superblock
corruption checks, and for the pass header messages. ("Pass
1: xxxxx")
util.c (print_resource_track): Now takes a description argument.
super.c, unix.c, e2fsck.c: New files to separate out the
operating-specific operations out from e2fsck.c. e2fsck.c now
contains the global e2fsck context management routines, and
super.c contains the "pass 0" initial validation of the
superblock and global block group descriptors.
pass1.c, pass2.c, pass3.c, pass4.c, pass5.c, util.c: Eliminate
(nearly) all global variables and moved them to the e2fsck
context structure.
problem.c, problem.h: Added new problem codes PR_0_SB_CORRUPT,
PR_0_FS_SIZE_WRONG, PR_0_NO_FRAGMENTS, PR_0_BLOCKS_PER_GROUP,
PR_0_FIRST_DATA_BLOCK
expect.1, expect.2:
Updated tests to align with e2fsck problem.c changes.
/external/e2fsprogs/e2fsck/ehandler.c
|
| 50e1e10fa0ac12a3e2a9d20a75ee9041873cda96 |
|
26-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checked in e2fsprogs 0.5c
/external/e2fsprogs/e2fsck/ehandler.c
|
| f3db3566b5e1342e49dffc5ec3f418a838584194 |
|
26-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checkin of e2fsprogs 0.5b
/external/e2fsprogs/e2fsck/ehandler.c
|
| 3839e65723771b85975f4263102dd3ceec4523c0 |
|
26-Apr-1997 |
Theodore Ts'o <tytso@mit.edu> |
Many files:
Checkin of e2fsprogs 0.5b
/external/e2fsprogs/e2fsck/ehandler.c
|