| 8592933de82f7742f411cb2f2c339ff7d42266da |
|
31-Jul-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: make resolve sampler objects allow sRGB conversion
Just figured out what that bit does.
Note: It's converted back to sRGB on write, so no effective
conversion occurs.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 6286d9810b7ebae588060370cd7a63c327478a2f |
|
31-Jul-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
Revert "gallium: specify resource_resolve destination via a pipe_surface"
This reverts commit 5d5af7d359e0060fa00b90a8f04900b96f9058b0.
It turns out the issue this was supposed to fix merely counter-acted
a bug in the hardware driver that I wasn't aware of.
The resource_resolve is not supposed to do sRGB conversion, period.
(This would violate the requirement that source and destination must
be of the same format).
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 5d5af7d359e0060fa00b90a8f04900b96f9058b0 |
|
25-Jul-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
gallium: specify resource_resolve destination via a pipe_surface
The format member of pipe_surface may differ from that of the
pipe_resource, which is used to communicate, for instance, whether
sRGB encode should be enabled in the resolve operation or not.
Fixes resolve to sRGB surfaces in mesa/st when GL_FRAMEBUFFER_SRGB
is disabled.
Reviewed-by: Brian Paul <brianp@vmware.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| b328949a37fee7b0f68ed3e068ffc4426c083042 |
|
29-Apr-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: fix depth/stencil resolve
Cannot sample depth/stencil with a single view, and needed to use
different shader code for nve4.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| e44089b2f79aa2dcaacf348911433d1e21235c0c |
|
14-Apr-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: add initial support for nve4+ (Kepler) chipsets
Most things that work on Fermi should work on Kepler too.
There are a few performance optimizations left to do, like better
placement of texture barriers and adding scheduling data to the
shader instructions (without them, a thread group will be masked
for 32 cycles after each single instruction issue).
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 7a40ae4a31f3ab526706fdfda7631d54f094512a |
|
28-Feb-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: prefix all macro methods with MACRO
Some of them have non-macro counterparts.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 784f49e69624cba07616fd5a22ccb80ad3b5111b |
|
08-Mar-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: track texture dirty state individually
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 6d1cdec3ba151168bfc3aef222fba6265dfb41fb |
|
06-Apr-2012 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nouveau: switch to libdrm_nouveau-2.0
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| dc4c821f0817a3db716f965692fb701079f66340 |
|
10-Jan-2012 |
Marek Olšák <maraeo@gmail.com> |
Squash-merge branch 'gallium-clip-state'
Conflicts:
src/gallium/auxiliary/tgsi/tgsi_strings.c
src/mesa/state_tracker/st_atom_clip.c
commit d919791f2742e913173d6b335128e7d4c63c0840
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 17:59:22 2012 +0100
d3d1x: adapt to new clip state
commit cfec82bca3fefcdefafca3f4555285ec1d1ae421
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 14:16:51 2012 +0100
gallium/docs: update for clip state changes
commit c02bfeb81ad9f62041a2285ea6373bbbd602912a
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 14:21:43 2012 +0100
tgsi: add TGSI_PROPERTY_PROHIBIT_UCPS
commit d4e0a785a6a23ad2f6819fd72e236acb9750028d
Author: Brian Paul <brianp@vmware.com>
Date: Thu Jan 5 08:30:00 2012 -0700
tgsi: consolidate TGSI string arrays in new tgsi_strings.h
There was some duplication between the tgsi_dump.c and tgsi_text.c
files. Also use some static assertions to help catch errors when
adding new TGSI values.
v2: put strings in tgsi_strings.c file instead of the .h file.
Reviewed-by: Dave Airlie <airlied@redhat.com>
commit c28584ce0d8c62bd92c8f140729d344f88a0b3cd
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 12:48:09 2012 +0100
gallium: extend user_clip_plane_enable to apply to clip distances
commit f1d5016c07f786229ed057effbe55fbfd160b019
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Jan 6 02:39:09 2012 +0100
nvfx: adapt to new clip state
commit 6f6fa1c26bd19f797c1996731708e3569c9bfe24
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Jan 6 01:41:39 2012 +0100
st/mesa: fix DrawPixels with GL_DEPTH_CLAMP
commit c86ad730aa1c017788ae88a55f54071bf222be12
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Tue Jan 3 23:51:30 2012 +0100
nv50: adapt to new clip state
commit 3a8ae6ac243bae5970729dc4057fe02d992543dc
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Tue Jan 3 23:32:36 2012 +0100
nvc0: adapt to new clip state
commit 6243a8246997f8d2fcc69ab741a2c2dea080ff11
Author: Marek Olšák <maraeo@gmail.com>
Date: Thu Dec 29 01:32:51 2011 +0100
draw: initalize pt.user.planes in draw_init
This fixes a crash in glean/fpexceptions.
commit e3056524b19b56d473f4faff84ffa0eb41497408
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Dec 26 06:26:55 2011 +0100
svga: adapt to new clip state
commit c5bfa8b37d6d489271df457229081d6bbb51b4b7
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 14:11:51 2011 +0100
r600g: adapt to new clip state
commit f11890905362f62627c4a28a8255b76eb7de7df2
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 14:10:26 2011 +0100
r300g: adapt to new clip state
commit e37465327c79a01112f15f6278d9accc5bf3103f
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 12:39:16 2011 +0100
draw: adapt to new clip state
This adds a regression in the LLVM clipping path. Can anybody see anything
wrong with the code? It works for every other case, just glean/fpexceptions
crashes when doing the "Infinite clip plane test".
commit b474d2b18c72d965eefae4e427c269cba5ce6ba2
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 13:14:59 2011 +0100
u_blitter: don't save/set/restore clip state
commit 9dd240ea91f523a677af45e8d0adb9e661e28602
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 13:11:56 2011 +0100
gallium: don't cso_save/set/restore clip state
The enable bits are in the rasterizer state.
commit a4f7031179f5f4ad524b34b394214b984ac950f6
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 12:58:55 2011 +0100
gallium: default depth_clip to 1
depth_clip = !depth_clamp
commit fe21147a00ab90e549d63fe12ee4625c9c2ffcc3
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Dec 26 06:14:19 2011 +0100
trace,util: update state logging to new clip state
Also dump the other missing flags.
commit 2a3b96e84ac872dcc5bc1de049fe76bb58d64b23
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 10:43:43 2011 +0100
st/mesa: adapt to new clip state
commit b7b656a42fca19d7c85267f42649a206a85a2c72
Author: Marek Olšák <maraeo@gmail.com>
Date: Sat Dec 17 15:45:19 2011 +0100
gallium: move state enable bits from clip_state to rasterizer_state
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 14bd9d764802b5fedb652c791faafe4d13b65262 |
|
09-Dec-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: implement new stream output interface
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 28271fd00dc5dd83f95b5cb890e0ab2c0ff6159d |
|
18-Oct-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: add support for linear and buffer textures and RTs
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| e104bb9f926ee4c0847327bc396f467a47e26582 |
|
14-Oct-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: fix clear_render_target/depth_stencil region
In all 3 dimensions (now clearing all layers too).
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 866f9b18c68ede63c00917ec9c3dae3524ca8826 |
|
11-Sep-2011 |
Dave Airlie <airlied@redhat.com> |
gallium: rename ZS stencil type to UINT (v2)
these are never USCALED, always UINT in reality.
taken from some work by Christoph Bumiller
v2: fixup formatting of table + tabs
Signed-off-by: Dave Airlie <airlied@redhat.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 6dd284f7c8fac22f64c13fdf9909094f5ec59086 |
|
16-Sep-2011 |
Dave Airlie <airlied@redhat.com> |
gallium: move clear paths from rgba to a pointer to a color union (v2)
This moves the gallium interface for clears from using a pointer to 4 floats to a pointer to a union of float/unsigned/int values.
Notes:
1. the value is opaque.
2. only when the value is used should it be interpretered according to
the surface format it is going to be used with.
3. float clears on integer buffers and vice-versa are undefined.
v2: fixed up vega and graw, dropped hunks that shouldn't have been in
patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 7744e867b7f45f3f9d763b61d7219dc28ca39c45 |
|
14-Sep-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: implement resource_resolve
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 222b3ea653e5525a4afa57e6a2353335953012d4 |
|
27-Aug-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: add states mask to state validation function
This prevents null dereferences in validation of interdependent
state after a switch to a pipe context where we mark all state
as dirty but where not all state is valid / set yet.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 9e466e87e6fde23f8ec0923be86005be81ac2d24 |
|
25-Jul-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: never convert in resource copy when format sizes match
If there are any cases left where the st thinks that RGBA -> BGRA
will swap components, it will get what it deserves.
Now the GPU's 2D engine goes unused. What a shame.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 7e2827fad95071e04e382be0117c654445764c52 |
|
11-Jul-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: extensive surface format renaming to get consistency
Now the component ordering is consistent and matches gallium again.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| b2dcf880e8bcd61be59602f5a2d18c77a5fc60c1 |
|
11-Jul-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: add support for multi-sample resources
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| cad17554c4b121c03e188dd0281718a52d603a15 |
|
14-Jul-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: unify nvc0_miptree and nv50_miptree structs
Share some functions and restructure miptree creation a little.
Prepare for multi-sample resources.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 883d8a0b449b53d83cc5970d2ce50df536aef55f |
|
21-Apr-2011 |
Marek Olšák <maraeo@gmail.com> |
gallium: add fallback for copying buffers to all drivers
Just to keep drivers working.
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 11f07a35f4734401999c00749e36f39d3e7ad161 |
|
05-Mar-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: s/nblocksx/nblocksy for height in resource_copy_region
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| e4c968cdbbdc020afbf869d12b536c0a0dbf9de8 |
|
04-Mar-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: update the format tables
Removed sampler view support for USCALED/SSCALED, the texture unit
refuses to convert to non-normalized float. The enums are treated
like UNORM.
Removed duplicate format related headers.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| f556b897eb5a41116529bec24d47f70a0c46789f |
|
04-Mar-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: use m2mf for resource_copy_region if formats are equal
Which is always the case, but we'll keep the 2D engine blitter
nonetheless.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 4fae7da9a3a3849ca08ffc6fcbdccc6a9c065ad2 |
|
05-Mar-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nv50,nvc0: fix texture layer issues
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 1ba8e9510812f155359d380bda6876cdee5ba21e |
|
01-Mar-2011 |
Ben Skeggs <bskeggs@redhat.com> |
nouveau: ensure vbo_dirty is set when buffer write transfer complete
This introduces a shared nouveau_context struct to track such things.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 4826cd0f6125b071530026143ffd8205d84b3d5e |
|
01-Mar-2011 |
Ben Skeggs <bskeggs@redhat.com> |
nvc0: port to common fence/mm/buffer code
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 19f2272e94895cf241f6b05117535e008e07d0a7 |
|
14-Feb-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: demagic the clear flags and fix region clears
The CLIP_RECTs always affect dedicated clears, and it's nicer than
having to mark the viewport or scissor state dirty after it.
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 1b4c0c8ea0b4e6065f23f9f2bbb954a7bd2549e4 |
|
12-Feb-2011 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: update the set of formats supported by the 2D engine
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| ca5deb0c355cc4a120b754a228ff5f51007fbcea |
|
19-Dec-2010 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: adapt to array textures interface change
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|
| 4c2247538394a313e1e90bfcd07c1ab9c7d41281 |
|
12-Nov-2010 |
Christoph Bumiller <e0425955@student.tuwien.ac.at> |
nvc0: import nvc0 gallium driver
/external/mesa3d/src/gallium/drivers/nvc0/nvc0_surface.c
|