| ef784fb7f58c9c021172045a8e0b396c81fdc425 |
|
30-Oct-2015 |
caryclark <caryclark@google.com> |
More conic-specific tests revealed a few conic-specific bugs. Because javascript / canvas make visualizing conics tricky, new native tools are required.
The utility SubsetPath removes parts of a potentially very large path to isolate a minimal test case. SubsetPath is very useful for debugging path ops, but is not path ops specific.
PathOpsBuilderConicTest compares the output of the Path Ops Builder, sequential calls to Simplify, and SkRegions for some number of rotated ovals.
Some tests caused path ops to hang. It was caught adding a loop of curves because the head was not found by the tail. Even though the root cause has been fixed, SkSegment::addCurveTo callers now abort the path op if the same curve was added twice.
The subdivided conic weight was been computed anew. Fortunately, it's a simpler computation that the one it replaces.
Some Simplify() subroutines returned false to signal that the results needed assembling. Change these to abort the current operation instead.
Coincident curve intersection triggered two small bugs; one where no perpendicular could be found for coincident curves, and one where no coincident curves remain after looping.
The SixtyOvals test can be run through multiple processes instead of multiple threads. This strategy allows a 48 core machine to saturate all cores at 100%.
The DEBUG_VISUALIZE_CONICS code in PathOpsConicIntersectionTest acknowleges that it is easier to visualize conics with Skia than with script and html canvas. This test also verifies that path ops subdivision matches geometry chopping.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1405383004
/external/skia/src/pathops/SkOpSpan.h
|
| 26ad22ab61539e3d3b6bc5e0da8dcebbd52a53de |
|
16-Oct-2015 |
caryclark <caryclark@google.com> |
Enabling clip stack flattening exercises path ops.
Iterating through the 903K skps that represent the
imagable 1M top web pages triggers a number of
bugs, some of which are addressed here.
Some web pages trigger intersecting cubic
representations of arc with their conic
counterparts. This exposed a flaw in coincident
detection that caused an infinite loop. The loop
alternatively extended the coincident section and,
determining the that the bounds of the curve pairs
did not overlap, deleted the extension.
Track the number of times the coincident detection
is called, and if it exceeds an empirically found
limit, assume that the curves are coincident and
force it to be so.
The loop count limit can be determined by enabling
DEBUG_T_SECT_LOOP_COUNT and running all tests. The
largest count is reported on completion.
Another class of bugs was caused by concident
detection duplicating nearly identical points that
had been merged earlier. To track these bugs, the
'handle coincidence' code was duplicated as a
const debug variety that reported if one of a
dozen or so irregularities are present; then it is
easier to see when a block of code that fixes one
irregularity regresses another.
Creating the debug const code version exposed some
non-debug code that could be const, and some that
was experimental and could be removed. Set
DEBUG_COINCIDENCE to track coincidence health and
handling.
For running on Chrome, DEBUG_VERIFY checks the
result of pathops against the same operation
using SkRegion to verify that the results are
nearly the same.
When visualizing the pathops work using
tools/pathops_visualizer.htm, set
DEBUG_DUMP_ALIGNMENT to see the curves after
they've been aligned for coincidence.
Other bugs fixed include detecting when a
section of a pair of curves have devolved into
lines and are coincident.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1394503003
/external/skia/src/pathops/SkOpSpan.h
|
| 96fcdcc219d2a0d3579719b84b28bede76efba64 |
|
27-Aug-2015 |
halcanary <halcanary@google.com> |
Style Change: NULL->nullptr
DOCS_PREVIEW= https://skia.org/?cl=1316233002
Review URL: https://codereview.chromium.org/1316233002
/external/skia/src/pathops/SkOpSpan.h
|
| d4349723fac9c0fd4dcf8c275fb7c756bdfdff7b |
|
23-Jul-2015 |
caryclark <caryclark@google.com> |
fix path ops fuzz buster
Mark collapsed segments as done and remove collapsed
segment references from the coincidence array.
Also add test names to global debugging.
R=fmalita@chromium.org
BUG=512592
Review URL: https://codereview.chromium.org/1250293002
/external/skia/src/pathops/SkOpSpan.h
|
| 27c8eb8ffd7e221693d840c2b9279d53fe6f03d4 |
|
06-Jul-2015 |
caryclark <caryclark@google.com> |
When three or more edges are coincident, the logic needs
to compute the overlapping ranges and combine the winding
into a single destination.
This computes coincidence more rigorously, fixing the
edge cases exposed by this bug.
Also, add the ability to debug and dump pathop structures
from the coincident context.
TBR=reed@google.com
BUG=skia:3651
Review URL: https://codereview.chromium.org/1182493015
/external/skia/src/pathops/SkOpSpan.h
|
| bca19f77479adfd8ba2171753382bc8bf4c2b4ca |
|
13-May-2015 |
caryclark <caryclark@google.com> |
deal more consistently with unsortable edges
Improve line/curve coincident detection and resolution. This fixed the remaining simple failures.
When an edge is unsortable, use the ray intersection to determine the angles' winding.
Deal with degenerate segments.
TBR=reed@google.com
BUG=skia:3588,skia:3762
Review URL: https://codereview.chromium.org/1140813002
/external/skia/src/pathops/SkOpSpan.h
|
| 624637cc8ec22c000409704d0b403ac1b81ad4b0 |
|
11-May-2015 |
caryclark <caryclark@google.com> |
Path ops formerly found the topmost unprocessed edge and determined its angle sort order to initialize the winding. This never worked correctly with cubics and was flaky with paths consisting mostly of vertical edges.
This replacement shoots axis-aligned rays through all intersecting edges to find the outermost one either horizontally or vertically. The resulting code is smaller and twice as fast.
To support this, most of the horizontal / vertical intersection code was rewritten and standardized, and old code supporting the top-directed winding was deleted.
Contours were pointed to by an SkTDArray. Instead, put them in a linked list, and designate the list head with its own class to ensure that methods that take lists of contours start at the top. This change removed a large percentage of memory allocations used by path ops.
TBR=reed@google.com
BUG=skia:3588
Review URL: https://codereview.chromium.org/1111333002
/external/skia/src/pathops/SkOpSpan.h
|
| 08bc8488fa2ea2d2a17efb1443f0ec6579d5a3c8 |
|
24-Apr-2015 |
caryclark <caryclark@google.com> |
fix multiple intersection logic
When three or more curves intersect at the same point, ensure that
each curve records the intersections of the others. This fixes a
number of cubic tests.
TBR=reed@google.com
BUG=skia:3588
Review URL: https://codereview.chromium.org/1105943002
/external/skia/src/pathops/SkOpSpan.h
|
| 1049f1246e7be4ccb68001361efceb8933e6f81c |
|
20-Apr-2015 |
caryclark <caryclark@google.com> |
Now, path ops natively intersect conics, quads, and cubics in any combination. There are still a class of cubic tests that fail and a handful of undiagnosed failures from skps and fuzz tests, but things are much better overall.
Extended tests (150M+) run to completion in release in about 6 minutes; the standard test suite exceeds 100K and finishes in a few seconds on desktops.
TBR=reed
BUG=skia:3588
Review URL: https://codereview.chromium.org/1037953004
/external/skia/src/pathops/SkOpSpan.h
|
| 54359294a7c9dc54802d512a5d891a35c1663392 |
|
26-Mar-2015 |
caryclark <caryclark@google.com> |
cumulative pathops patch
Replace the implicit curve intersection with a geometric curve intersection. The implicit intersection proved mathematically unstable and took a long time to zero in on an answer.
Use pointers instead of indices to refer to parts of curves. Indices required awkward renumbering.
Unify t and point values so that small intervals can be eliminated in one pass.
Break cubics up front to eliminate loops and cusps.
Make the Simplify and Op code more regular and eliminate arbitrary differences.
Add a builder that takes an array of paths and operators.
Delete unused code.
BUG=skia:3588
R=reed@google.com
Review URL: https://codereview.chromium.org/1037573004
/external/skia/src/pathops/SkOpSpan.h
|
| 0dc4dd6dda9a7912f696b46d9c02155ec1d1ba5f |
|
24-Mar-2015 |
reed <reed@google.com> |
Revert of pathops version two (patchset #16 id:150001 of https://codereview.chromium.org/1002693002/)
Reason for revert:
ASAN investigation
Original issue's description:
> pathops version two
>
> R=reed@google.com
>
> marked 'no commit' to attempt to get trybots to run
>
> TBR=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/ccec0f958ffc71a9986d236bc2eb335cb2111119
TBR=caryclark@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1029993002
/external/skia/src/pathops/SkOpSpan.h
|
| ccec0f958ffc71a9986d236bc2eb335cb2111119 |
|
24-Mar-2015 |
caryclark <caryclark@google.com> |
pathops version two
R=reed@google.com
marked 'no commit' to attempt to get trybots to run
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1002693002
/external/skia/src/pathops/SkOpSpan.h
|
| dac1d17027dcaa5596885a9f333979418b35001c |
|
17-Jun-2014 |
caryclark <caryclark@google.com> |
Enabling the canvas bit to turn the clip stack into a flat replace exposed around 100 failures when testing the 800K skp set generated from the top 1M web sites.
This fixes all but one of those failures.
Major changes include:
- Replace angle indices with angle pointers. This was motivated by the need to add angles later but not renumber existing angles.
- Aggressive segment chase. When the winding is known on a segment, more aggressively passing that winding to adjacent segments allows fragmented data sets to succeed.
- Line segments with ends nearly the same are treated as coincident first.
- Transfer partial coincidence by observing that if segment A is partially coincident to B and C then B and C may be partially coincident.
TBR=reed
Author: caryclark@google.com
Review URL: https://codereview.chromium.org/272153002
/external/skia/src/pathops/SkOpSpan.h
|
| 8cb1daaa1e4343eb60a7c4f21c12e33de30dad64 |
|
25-Apr-2014 |
commit-bot@chromium.org <commit-bot@chromium.org@2bbb7eff-a529-9590-31e7-b0007b416f81> |
fix minor skp-found bugs
remove globals from pathops_unittest
BUG=skia:2460
TBR=mtklein
Author: caryclark@google.com
Review URL: https://codereview.chromium.org/239563004
git-svn-id: http://skia.googlecode.com/svn/trunk@14378 2bbb7eff-a529-9590-31e7-b0007b416f81
/external/skia/src/pathops/SkOpSpan.h
|
| 4431e7757cfcb8cfa99535eed0e9f156dabf95c2 |
|
14-Apr-2014 |
commit-bot@chromium.org <commit-bot@chromium.org@2bbb7eff-a529-9590-31e7-b0007b416f81> |
Mike R: please sanity check SkPostConfig.h
Mike K: please sanity check Test.cpp and skia_test.cpp
Feel free to look at the rest, but I don't expect any in depth review of path ops innards.
Path Ops first iteration used QuickSort to order segments radiating from an intersection to compute the winding rule.
This revision uses a circular sort instead. Breaking out the circular sort into its own long-lived structure (SkOpAngle) allows doing less work and provides a home for caching additional sorting data.
The circle sort is more stable than the former sort, has a robust ordering and fewer exceptions. It finds unsortable ordering less often. It is less reliant on the initial curve tangent, using convex hulls instead whenever it can.
Additional debug validation makes sure that the computed structures are self-consistent. A new visualization tool helps verify that the angle ordering is correct.
The 70+M tests pass with this change on Windows, Mac, Linux 32 and Linux 64 in debug and release.
R=mtklein@google.com, reed@google.com
Author: caryclark@google.com
Review URL: https://codereview.chromium.org/131103009
git-svn-id: http://skia.googlecode.com/svn/trunk@14183 2bbb7eff-a529-9590-31e7-b0007b416f81
/external/skia/src/pathops/SkOpSpan.h
|
| 866f4e34a943c115ac372c22123a1520aa5f9b06 |
|
21-Nov-2013 |
commit-bot@chromium.org <commit-bot@chromium.org@2bbb7eff-a529-9590-31e7-b0007b416f81> |
optimize pathops coverage
Remove unused code from SkOpSegment.cpp and friends.
Add new tests exposed by coverage.
Fix a bug exposed by coverage -- removing the need to detect points that are nearby when intersecting.
Add gyp rule for building coverage flavor on Mac.
R=mtklein@google.com
Author: caryclark@google.com
Review URL: https://codereview.chromium.org/75453003
git-svn-id: http://skia.googlecode.com/svn/trunk@12344 2bbb7eff-a529-9590-31e7-b0007b416f81
/external/skia/src/pathops/SkOpSpan.h
|
| 570863f2e22b8ea7d7c504bd15e4f766af097df2 |
|
16-Sep-2013 |
caryclark@google.com <caryclark@google.com@2bbb7eff-a529-9590-31e7-b0007b416f81> |
path ops work in progress
path ops work in progress
BUG=
Review URL: https://codereview.chromium.org/21359002
git-svn-id: http://skia.googlecode.com/svn/trunk@11291 2bbb7eff-a529-9590-31e7-b0007b416f81
/external/skia/src/pathops/SkOpSpan.h
|
| 07393cab57ce74a4aae89a31fae9aaa9780fc19d |
|
08-Apr-2013 |
caryclark@google.com <caryclark@google.com@2bbb7eff-a529-9590-31e7-b0007b416f81> |
Add base types for path ops
Paths contain lines, quads, and cubics, which are
collectively curves.
To work with path intersections, intermediary curves
are constructed. For now, those intermediates use
doubles to guarantee sufficient precision.
The DVector, DPoint, DLine, DQuad, and DCubic
structs encapsulate these intermediate curves.
The DRect and DTriangle structs are created to
describe intersectable areas of interest.
The Bounds struct inherits from SkRect to create
a SkScalar-based rectangle that intersects shared
edges.
This also includes common math equalities and
debugging that the remainder of path ops builds on,
as well as a temporary top-level interface in
include/pathops/SkPathOps.h.
Review URL: https://codereview.chromium.org/12827020
git-svn-id: http://skia.googlecode.com/svn/trunk@8551 2bbb7eff-a529-9590-31e7-b0007b416f81
/external/skia/src/pathops/SkOpSpan.h
|