| 57c2d39d85825f38c5fdac9b73bb0088406ffc85 |
|
23-Feb-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 077dcfb8c48d2509a6e116c0de3ad57d2fbfe4fe
077dcfb AP: Debug print management frame TX result
ca911d6 MBO: Parse non-preferred channel list on the AP
3f48274 WNM: Fix a memory leak on AP error path
f5ca176 VLAN: Fix vlan_compare() for tagged VLANs
1260564 hostapd_cli: Add support for RAW command
940491c MBO: Mandate use of PMF for WPA2+MBO association (STA)
4c57228 MBO: Mandate use of PMF for WPA2+MBO association (AP)
8dd49f0 MBO: Update STA cellular data capability based on WNM Notification
6332aaf MBO: Track STA cellular data capability from association request
f3cb7a6 WNM: Minimal processing for WNM Notification Request frames on AP
e578343 MBO: Indicate WNM-Notification support on AP when MBO is enabled
990b7b6 Simplify hostapd_build_ap_extra_ies() with helper functions
d010048 MBO: Expire non-matching bss_tmp_disallowed entries as part of check
f4c74e1 MBO: Parse MBO IE in ieee802_11_parse_elems()
016082e MBO: Send WNM-Notification when cellular capabilities change
c0e2a17 hostapd: Add MBO IE to BSS Transition Management Request frame
fb9a1c3 hostapd: Add MBO IE to Beacon, Probe Response, Association Response
c484b19 Move Hotspot 2.0 element in (Re)Association Request frames
a0c38e5 Re-order elements in (Re)Association Request frames
9a493fa WNM: Add candidate list to BSS transition query
84d1c0f WNM: Add candidate list to BSS transition response
cf11ab7 utils: Derive phy type by frequency and bandwidth
c8082d2 MBO: Add MBO IE to BSS Transition Management Response frame
dd59990 MBO: Parse MBO IE in BSS Transition Management Request frames
5e57ba2 MBO: Add Supported Operating Classes element to Association Request
7d46f58 MBO: Add global operating class definitions
cb06cf3 MBO: Prevent association to APs that explicitly disallow this
c5d193d MBO: Add cellular capability to MBO IE
2d5b861 MBO: Send MBO WNM-Notification Request frames to notify changes
92c6e2e MBO: Implement MBO non-preferred channel report in Association Request
facf2c7 MBO: Add non-preferred channel configuration in wpa_supplicant
425dd78 MBO: Add Multi Band Operation definitions
a159958 ndis: Use the new get_ie() helper to avoid duplicated code
231b04b utils: Share a single helper function to get IE by ID
ea69d97 wpa_supplicant: Share a single get_mode() implementation
75cc211 VLAN: Check vlan_desc validity in a failure debug print
43022ab Use 64-bit TX/RX byte counters for statistics
3f81ac0 AP: Set STA assoc flag in the driver before sending Assoc Resp frame
bb598c3 AP: Add support for full station state
dc55b6b nl80211: Add support for full station state operations
5558b99 EAP-FAST peer: Remove fixed return value from eap_fast_parse_phase1()
4b16c15 EAP-pwd server: Use os_get_random() for unpredictable token
239952b DFS: Remove the os_random() fallback
98a516e WPS: Use only os_get_random() for PIN generation
f441e5a Use os_get_random() for Shared Key authentication challenge
8c676b5 Add RADIUS Service-Type attribute with a value of Framed
09d96de mesh: Drop Authentication frames from BLOCKED STA
70c9396 SAE: Fix PMKID calculation for PMKSA cache
1492fbb Print Acct-Session-Id and Acct-Multi-Session-Id 64-bit values
e21ceca kqueue: Use 0 instead of NULL for udata
640b0b9 ctype functions require an unsigned char
a5a3efc Fix compile on NetBSD for vlan
a084c24 wired: Fix compile on NetBSD for wired driver
634e2e2 Add CONFIG_ELOOP_KQUEUE to defconfig
99a94f5 nl80211: Avoid wpa_printf %s call with NULL pointer in set_param()
ba91e92 wpa_supplicant: Parse ifname argument from DATA_TEST_CONFIG
8be640b VLAN: Add per-STA vif option
d0bdc96 VLAN: Actually add tagged VLANs to AP_VLAN
f9c0018 VLAN: Factor out per-vid code in newlink/dellink
8e44c19 radius: Add tagged VLAN parsing
1889af2 VLAN: Separate station grouping and uplink configuration
3a583e0 OpenSSL: Fix PKCS#12 parsing of extra certificates with OpenSSL 1.0.1
ddd0032 wpa_cli: Clean up logical operation
24c382a TDLS: Clean up os_memcmp use
6136d43 trace: Free symbols on program exit
8bcf8de OpenSSL: Fix memory leak in PKCS12 additional certificate parsing
03e3ddf OpenSSL: Fix memory leak in HMAC_CTX compatibility wrapper function
d9a0f69 OpenSSL: Fix memory leak in OCSP parsing
29bc76e OpenSSL: Do not use library init/deinit functions with 1.1.0
0f09637 OpenSSL: Fix memory leak in subjectAltName parsing
e60913b curl: Fix memory leak in subjectAltName parsing
6014890 OpenSSL: Fix memory leak with EVP_CIPHER_CTX_new()
99a1735 rfkill: Fix a memory leak
1f1e599 OpenSSL: Fix memory leak on error path
b907491 wpa_supplicant: Basic support for PBSS/PCP
86b5c40 nl80211: Basic support for PBSS/PCP
afa453a Sync with mac80211-next.git include/uapi/linux/nl80211.h
d1d8a2b EAP peer: Simplify buildNotify return
1314bc1 Clean up EAP peer PCSC identity functions
Change-Id: I9db475a2a4ebc88d2ee024319ed59a850636bb16
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| 1d6bf427f4769edb60865a3999d01eeb8f8fcb19 |
|
20-Jan-2016 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit e15dcf6d1bc2725388555523effca75b1ffab735
e15dcf6 nl8021: Avoid potential memory leak on error path
17d32eb Allow re-write of ip_addr* configurations to conf file.
bcce934 dbus: Restrict DeviceName size to 32 characters in setter
7c70fe2 Sort options and reduce printf calls in wpa_supplicant usage text
6b418ce Fix wpa_supplicant build with IEEE8021X_EAPOL=y and CONFIG_NO_WPA=y
03269d5 AP: Print interface name in more STA events
9e8fde2 AP: Fix Deauth/Disassoc TX status timeout handling
269f9d5 EAP peer: Use ifdef PCSC_FUNCS to get rid of compiler warnings
c6e0b4b FST: Get rid of gcc extensions in structure/array initialization
2e3a41a hs20-osu-client: Fix check for osu_nai being available
ac2053b OpenSSL: Clean up openssl_digest_vector() to use a single implementation
5c9a337 OpenSSL: Clean up crypto_hash_*() to use a single implementation
587b045 LibreSSL: Fix build with LibreSSL
0daa9f6 EAP-TTLS peer: Fix success after fragmented final Phase 2 message
1eb87ae OpenSSL: Use EVP_CIPHER_CTX_new() to work with OpenSSL 1.1.0
3fb3bea OpenSSL: Update session_secret callback to match OpenSSL 1.1.0 API
814f43c EAP server: Simplify EAP method registration call
49a26bb EAP peer: Simplify EAP method registration call
7ce5603 EAP-WSC peer: Remove unused state values
449a316 bsd: Optimize socket use
4653ceb nl80211: Report disassociated STA / lost peer for the correct BSS
38af042 Drop OpenSSL 0.9.8 patches to add EAP-FAST support
Change-Id: Ib88c54b382c322d6151ed77e08f83329f918e3e8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| fb45fd5cfed8bdccd0859c7fc05449fc187e2d06 |
|
05-Jan-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 8b48e3200680f71ae083b84793e6bdc2099416d2
8b48e32 wpa_cli: Add MAC address randomization in scan
fb37588 ctrl_iface: Add MAC address randomization in scan processing
56c76fa scan: Add MAC address randomization in scan handling
86056fe nl80211: Handle MAC address randomization in scan/sched_scan
ff23ed2 driver: Add definitions for MAC address randomization in scan
7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands
72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel
6b90dea TDLS: Propagate enable/disable channel-switch commands to driver
d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS
4daa572 TDLS: Add channel-switch capability flag
ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h
8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS
677e7a9 WMM AC: Do not fail on unknown IEs in Association Response
fecc2bb WMM AC: Delete tspecs on roaming
20fe745 WMM AC: Print user-priority in wmm_ac_status
730a0d1 nl80211: Always register management frames handler
...
209702d Add possibility to set the setband parameter
ee82e33 Do not trigger the scan during initialization on Android platforms
e69ae5f Reject new SCAN commands if there is a pending request
...
59d7148 nl80211: Provide subtype and reason code for AP SME drivers
9d4ff04 Add external EAPOL transmission option for testing purposes
61fc904 P2P: Handle improper WPS termination on GO during group formation
58b40fd P2P: Clear p2p_go_group_formation_completed on GO start
c155305 Complete sme-connect radio work when clearing connection state
debb2da P2P: Report group removal reason PSK_FAILURE in timeout case
51465a0 The master branch is now used for v2.4 development
Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| 34af306c42b7ccf956508e7cd23f0ba90606e360 |
|
11-Jul-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 1075b2957169d8f9d6dddd7679339c751dc9515b
1075b29 P2P: Report group formation failure on error to start GO mode
b62b29e Do not block on ctrl_iface monitor events
eb7ddbf WPS: Stop SSDP service before freeing the pending entries
98cbc0a Remove forgotten Xcode defines
0b9d3b2 Interworking: Relax 3GPP info PLMN matching for MNC
c7a67a7 WPS: Disconnect when removing existing WPS network block
fe65847 EAP-EKE: Add server implementation
7e7610d EAP-EKE: Add peer implementation
489202d EAP-SAKE: Use configured server identity
a607b42 EAP-PSK: Use configured server identity
15b042b EAP-MSCHAPv2: Use configured server identity
162865b EAP-IKEv2 server: Use configured server identity
8f89d82 EAP-GPSK server: Use configured server identity
67fe933 Add server identity configuration for EAP server
06aeff5 dbus: Register the AutoScan method call at the right place
78f79fe P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
1c42b42 P2P: Fix TDLS and l2_packet init without P2P Device interface
9e6a321 Fix non-P2P build after the P2P_DEVICE changes
d53d259 Fix build with older OpenSSL versions
54d4ba4 nl80211: Silence a compiler warning with older gcc versions
2e5ba4b P2P: Derive group interface name bit more sensibly
c68f620 P2P: Create P2P Device interface if supported
851b0c5 nl80211: Do not indicate P2P_DEVICE support by default
bb4028f P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
7940c79 nl80211: Use wdev id when cancelling wait for frame using P2P_DEVICE
f608081 nl80211: Verify P2P GO/client address with all interface addresses
5fbcb45 nl80211: Fix determining phy name for P2P Device
27ce1d6 nl80211: Fix nl80211_get_wiphy_index() for P2P Device
080585c Add support for OCSP stapling to validate server certificate
72950ed P2P: Remove a call to wpas_p2p_deinit_global()
ab7a1ad nl80211: Fix P2P group interface creating using P2P Device
fa93de4 nl80211: Use wdev_id in nl80211_create_iface_once()
fdc554b nl80211: Use wdev id to obtain P2P Device scan results
597b94f nl80211: Add .get_mac_addr() callback for P2P Device
8e12685 nl80211: Rework setting interface mode
91724d6 nl80211: Introduce i802_set_iface_flags()
eb4582f nl80211: Remove P2P Device interface upon .deinit()
f632e48 nl80211: Fix P2P Device interface initialization
e472e1b nl80211: Handle creation of P2P Device interface
01517c8 nl80211: Allow Android P2P functionality
6bae92e nl80211: Add support for P2P Device in add interface
d6dcfcd nl80211: Add a handler to create_interface
d3aaef8 nl80211: Hold wdev identification for P2P Device
7aad838 nl80211: Identify if nl80211 is capable of P2P Device abstraction
6a71413 nl80211: Rename is_p2p_interface
8393e1a nl80211: Print interface name on set_key()
80ebfd9 VLAN: Avoid access to non-existing interfaces
4345fe9 bridge: Track inter-BSS usage
459eee9 bridge: Use safe default bridge interface
2aaeedf bridge: Give bridge name in per-bss configuration
8a901d7 D-Bus: Emit signal when a station is authorized or deauthorized
9578329 Add AVG_RSSI report in signal_poll
2cc8d8f Add bandwidth and center freq info to signal_poll
1e0e943 Remove 802.11b rates only in case of P2P group operation
2090a0b nl80211: Add prints for kernel events
8743676 TDLS: Validate ext_supp_rates in copy_supp_rates
85b4eac P2P: Do not reply to 802.11b-only Probe Request frames as GO
ec7b97a Interworking: Add support for using eap_proxy offload
4331263 Fix session timeout after ANQP dummy STA entry with SME-in-driver
56cb4e1 wpadebug: Add option to ignore SSL errors
aa20e1a Remove CONFIG_NO_WPA2 build parameter
5d5c4ee Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
9aaa695 Remove compiler warnings if TDLS is enabled without WPA2
84ae1d4 Fix WNM build without WPA2
c33d5eb Fix build without WPA2 or EAP
1aef400 IBSS RSN: Implement disconnect() callback using sta_deauth()
Change-Id: I4593be5b1478f6532da917423b1d2afa95fb8020
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| f7e0a9905988e62e4f70fed8b795722abeab719b |
|
23-May-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit 376204934db44d45f798bdde4db005bc88d666f0
3762049 wpa_cli: Support tab completion with ifname= prefix
13b11ba wpa_cli: Allow IFNAME= prefix to be used
ae8535b WNM: Make ESS Disassoc Imminent event more convenient to use
6df634f WNM: Do not reject ESS Disassoc Imminent
7b53acd WNM: Use defines for BSS Trans Mgmt field values
8e1bc70 WNM: Fix ess_disassoc timeout to be specified in TBTTs
901d1fe WNM: Remove PMKSA cache entry on ESS disassoc imminent notification
dad153d Try to use fast-associate on ENABLE_NETWORK
b068001 Fix already-associated detection with driver-based BSS selection
72728c6 P2P: Relax channel forcing for invitation processing with MCC support
4033935 Fix OKC-based PMKSA cache entry clearing
1045ec3 nl80211: Add couple of additional iftypes to debug prints
2cadc8e TDLS: Retry TDLS Setup Response more quickly
Change-Id: Ib02db74ca336a4d2da66c21d361c5529ee85f864
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| 4b9d52f502481b258fec743c03a5e957e5605afc |
|
06-Feb-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit cc03d0fef3bf5913f8e11b7e998c10bf36a3c07f
Author: Amar Singhal <asinghal@qca.qualcomm.com>
Date: Wed Feb 6 00:31:34 2013 +0200
Add "BSS LAST ..." command
- Add "BSS LAST ..." command
- HS 2.0: Fix IE buffer length for extra scan IEs
- TDLS: Several fixes
- P2P: Fix P2P-GROUP-STARTED event for p2p_connect-join
- P2P: Fix Action frame processing if Interworking is enabled
- wpa_supplicant: Fix access to the freed memory when removing all networks
- Add driver for OpenBSD net80211 layer
- Make wpas_select_network_from_last_scan() static
- wpa_supplicant: Implement fast-associate on SelectNetwork
- Update scan interval gracefully
- eloop: Add a timer cancel that returns the remaining time
- nl80211: Do not use void pointer for driver_ops used internally
- hostapd: Fix crash when scan fails
Change-Id: I083747a0b1f7000730a9ab3ea80f3ee7e6247181
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| d5e4923d04122f81300fa68fb07d64ede28fd44d |
|
04-Dec-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Accumulative patch from commit f5f37d3a4fc2df2a24676b4f95afca15ed793cba
Author: Jouni Malinen <j@w1.fi>
Date: Sun Nov 25 22:05:32 2012 +0200
Fix REAUTHENTICATE command after PMKSA caching
The current PMKSA cache entry needs to be clear to allow EAPOL
reauthentication to be started in case this association used PMKSA
caching.
- Remove old WPS_OOB NCF
- WPS: Add preliminary NFC connection handover support for Enrollee
- WPS: Reenable the networks disabled during wpa_wpas_reassoc
- P2P: Avoid multi-channel scans when they are not needed
- P2P: Allow discoverable interval for p2p_find to be configured
- P2P: Allow all channels with multi-channel concurrency
- Bonjour changes
- Remove disassociate
- HS 2.0 changes
- Add preliminary support for using SQLite for eap_user database
- Add SAE support
- Add disallow_aps parameter to disallow BSSIDs/SSIDs
Change-Id: I85358a05b39d46b8db49acdad667e771c580b05c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/rsn_supp/pmksa_cache.h
|