cbefbc5940c49ab5eb7af4fb3e4dc229e617c0c2 |
|
02-May-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: Fix BWC buffer size BWC buffer size was added to address worst case sizes. But it doesn't take care of RGB formats. Also the YUV CbCr worst case is 32x2 not 64x2. This change fixes those. Change-Id: I72277bc1858ce704b34c831a73ce8cbcd93925fa
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
8bc12cba5e3e8377cd5ea3410609af005c01335d |
|
07-Feb-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: rotator: Remove previous allocation for a session When ION was not ref counted, we needed to maintain the previous session memory until the new one was taken by MDP. ION being ref counted now, it is not necessary to maintain previous memory allocation. Change-Id: I102df065bb288a661d509912f4c7b894505df393
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
fbda988d2909e2b8527098b5ffc93fa38fb0219e |
|
22-Jan-2014 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
liboverlay: remove warnings during compilation - Remove unused variables - Use proper typecast Change-Id: Ia60fc4c3c7ec39a1df4a780de7f5d75d723f7960
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
f963e55de71b4598d3bd65c02896f1a9ff8a787f |
|
17-Oct-2013 |
Tatenda Chipeperekwa <tatendac@codeaurora.org> |
liboverlay: explicitly set alignment to 1M for secure buffers On systems that do not have a Contiguous Memory Allocator (CMA) it is the responsibily of the client to specify the required address alignment. Additionally, we centralize size alignment to so that overlay clients do not need to take of this. Change-Id: Id6cec19bf59826fca2617c856bb62968790bf71c
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
b79d3ca8afad0421450869bd3058d15b71201a30 |
|
31-Jul-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
overlay: Fix compressed output buffer size for MDSS Rotator. Compressed output buffer size calculation for MDSS Rotator needs to be performed according to destination rectangle (rotated src rect) due to alignment requirements (like non-BWC calculation). Change-Id: I6a232d77ca5fce42a1cc3e7f406c9cc4d46553ed
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
17bc744d9876cae0ede15ad6de69b887c3db1381 |
|
09-Jul-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
overlay: Update rotator buffer size calculation for BWC. For BWC, update the rotator buffer size calculation in display HAL as MDSS driver needs to allocate for both chroma (U & V) planes. Change-Id: I140be2b0a38d6cd66e2ee1b3c9a8bb06efd96bfe
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
9bea850d6ebbb94c6e5806e5914b2c2aa376269c |
|
14-May-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
overlay: Do not carry over the stale rotator flags. Do not carry over the stale rotator flags from previous draw cycle. CRs-Fixed: 486749 Change-Id: Ie67ce1714e48381e58c64634d45b6915263efe5d
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
30323b98c1abab90dce91c3d226d4e65a24076fc |
|
31-Jan-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
liboverlay: Add support for MDSS Bandwidth Compression - This adds support for Bandwidth Compression. - If MDSS supports BWC, then we set BWC flags to both Rotator(encode) and overlay(decode) Change-Id: I6f7800716a2ce2ab855f4c0b1a53cd96f7d06d74
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
e7fd567eb00aea104a726a88540dba639e17bf29 |
|
24-Apr-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
hwc/overlay: Set crop rectangle for MDSS Rotator. Since MDSS rotator will crop, the crop rectangle for overlay will always start from (0,0). CRs-Fixed: 476494 Change-Id: I1ccece8eab7d1a97ccec561a4d0df4558b5e33c4
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
4762db4eb027284225be9d10f08d87252612064c |
|
11-Apr-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: Fix dumpsys crash In extreme cases, when all pipes are used, the buffer is insufficient. Reduce logging by striping off unnecessary bytes. Change-Id: I5a6ffb9ff288e389eea4e9ca4ac850ed59d539ff
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
027d88d922505ca1e8d90e231e69b40e7948ea9e |
|
10-Apr-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: Swap flips on 90 only for older mdp version. Older mdp rotator does 90 first and flip next, forcing HAL to swap flips, in presence of 90. Newer mdp does flip first and 90 next, owing to DMA pipe. (Also similar to GPU flip handling). So we can pass flips as-is. Change-Id: I379509a07e45966262005666e7727e7923079d3a
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
565bcd227933ac067efa29c52a9660f04f3c976f |
|
05-Apr-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: MdssRot: Clear orientation values in setTransform. We cleared the values after MSMFB_OVERLAY_SET, which could cause dumpsys to not show them. Clear the values in setTransfrom, before applying incoming values. Change-Id: Icf2244a0ea7f2cae5d8f1b8c5e2f4cbecbe3ce3f
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
327b2ba85538669304a50d0fb6cc2f6aab7aaf3b |
|
26-Feb-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc/overlay: Video on 4k2k external, 4k2k rotation. -Add support for Video via overlay on 4k2k external panel. -Add support for rotating videos on 4k2k panels. We use pre-rotation in hwc to rotate a video into a single buffer, irrespective of panel size. Then this buffer is fed to MDP. Rotator objects are managed by the new RotMgr. -Cleaup mdpcomp and overlay. Change-Id: Ifb08534747e8e18b6c58dd8a3e1a9947409100f1
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
dbdcee7b408fa6cbf37169d9601aa3598c91ce40 |
|
22-Feb-2013 |
Linux Build Service Account <lnxbuild@localhost> |
Merge "overlay: Fix rotator output buffer size."
|
a22f5873a9974b00f352370e077db9788ad67699 |
|
13-Feb-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: Add support for pipe dumps. Add support for pipe state dump useful in dumpsys. Reduce debug log spam when mdp state changes. Change-Id: Ie27ad00698085e2ffd6166ad2f7503fe16a571f8
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
e4dbe91c2c45ef7ad1f5106b75bd49062cf80c48 |
|
15-Feb-2013 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: Fix rotator output buffer size. Fix rotator output buffer size for mdp and mdss rotators. Output size is based on rotated width & height. Output format can be different than source format. It could be same if using mdss rot or using fastyuv mode in mdp rot. Deprecate the static mapping of rotator input and output formats. Driver will be responsible for correctly populating the dest format that its wishes to use. Change-Id: I17352d6d460cac24eb97083aed38668929c66807
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
c01db174462880690678edaf56cb189cf3b9200b |
|
13-Feb-2013 |
Linux Build Service Account <lnxbuild@localhost> |
Merge "liboverlay: Set mdp src format as rotator output format."
|
6be1d0f8c034cbb734a770fc04f00615cea943aa |
|
12-Feb-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
liboverlay: Fix stride alignment issue for s/w decoded video. 1. Due to alignment requirements on HAL_PIXEL_FORMAT_YV12 format, rotator buffer size calculation needs to be performed based on rotated width and height because buffer size can be different when width & height are swapped due to 90 degree rotation. 2. Input and output color formats are same for MDSS Rotator. Change-Id: I0a06ef9bb7bdceb951e7ab5160dac3e92a28bcda CRs-Fixed: 451871
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
47c130ffbafe12d6ddf6e8df4ffdd9916318c379 |
|
16-Nov-2012 |
Raj kamal <rkamal@codeaurora.org> |
liboverlay: Set mdp src format as rotator output format. * Set mdp source format as rotator output format rather than determine it from a fixed mapping of input/output formats. * This is needed since for the same input format to rotator, fastyuv mode if enabled may result in a different output format than the one if the mode is not enabled. * Do the inline optimization for rotator where possible CRs-fixed: 451064 Change-Id: If0bb2f3a44df10968383ab3f5c3625257518934d
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
8b2d50f3c665329517352269a687bdf562b2cc6d |
|
15-Jan-2013 |
Ramkumar Radhakrishnan <ramkumar@codeaurora.org> |
liboverlay: Rotator-assisted MDP downscaling of videos. Engage the rotator to assist MDP in performing video downscale for primary and external. This saves bandwidth and avoids causing the driver to make too many panel mode switches between BLT (writeback) and non-BLT (direct) modes. Change-Id: Icfabc2c0f978a23cf96c78a9976cf69cea697b5f CRs-Fixed: 434852
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
26a80a197c792e833131a2abc923d52db732d5a3 |
|
15-Jan-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
overlay: mdssRot: Do not reset non-rotation flags. Reset only rotation flags to fix stale orientation flag values. Resetting non-rotation flag breaks secure-playback using rotator. CRs-Fixed: 440417 Change-Id: Ia35c6258cfd26358b3dfe5cb006e9245d51e3dfc
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
80c8f568158d0d65306a710d5994bc8052364ec5 |
|
08-Jan-2013 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
overlay: mdssRot: Fix the logic for setting Rotator info flags. Set the required flags instead of considering SECURE flag only. CRs-Fixed: 423045 Change-Id: I82699d23de97c5276cac8f3b614b5d0463d7b06a
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
9698610c51504c1192fcd64f341fc7475cf7e166 |
|
18-Dec-2012 |
Saurabh Shah <saurshah@codeaurora.org> |
overlay: mdssRot: Fix stale rotation flag values. When moving from a non-zero to 0 orientation rot flags are not cleared. This change resets the flag to 0 after every commit. Change-Id: I2fb9759921c36620c53bf2ac92d9473a42919d8c
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
201b32ddd456ed8ffe60818d57e88d43e7ac08c6 |
|
20-Nov-2012 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
liboverlay: Mdss Rotator secure buffer needs to be aligned to 1M. It is TZ requirement, xpu needs the buffer size to be 1MB aligned for protection. Change-Id: Icd9047a54d5706c321445e7970fb0f455d0c130b
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
0522d5648711e45384699d4ccb295d64e7227c87 |
|
24-Oct-2012 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
liboverlay: Enable secure content flag in Mdss Rotator. - Secured contents shared with hardware should be uncached. - Secure heap needs to be contiguously allocated & aligned to 1MB, which is not supported by IOMMU heap. Change-Id: I6c7c00d5363319f9a6db6e52c1e78e1b16ecd9aa
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
270550d926a2e3c4d65b9c1c1d3b696f8a49b4cc |
|
06-Nov-2012 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
mdssRotator:For Venus, rotator buffer size depends on rotated w/h Due to alignment requirements on venus format, rotator buffer size calculation needs to be performed according to destination buffer dimensions. Due to these alignments, the buffer can be different when width and height are swapped due to 90 degree rotation. Change-Id: I8eb0f1ece22946e6c3b2106623c3457e6871fd9c
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
b1c1ba39399236d5a3d1486db67b2ec2e56b46ce |
|
16-Dec-2012 |
Linux Build Service Account <lnxbuild@localhost> |
Merge "display: Add target specific flag to support Venus color format"
|
da4e354248d655a64d0f8ef8262678ed82bb429e |
|
12-Dec-2012 |
Sushil Chauhan <sushilchauhan@codeaurora.org> |
display: Add target specific flag to support Venus color format Venus color format is not supported on older platforms. Add target specific flag in display hal and define Venus macros to zero for older platforms. Change-Id: I38141ae870e255a0e54ce9fde46fe6cc3415f179
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
df785e9cf231c7ff755920e60553fc743c0de64d |
|
12-Dec-2012 |
Ken Zhang <kenz@codeaurora.org> |
overlay: Do not unset overlay for MSMFB_NEW_REQUEST Change-Id: I40c21964db91e098f6f445e7860fefd09dcad768
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|
47377987cc4eef72ee3b0cdced8c3a15038b39eb |
|
28-Nov-2012 |
Naseer Ahmed <naseer@codeaurora.org> |
hwc/overlay: Dynamic pipe tracking. Remove state based pipe handling and make pipes tracked dynamically. Add the configStart, configDone, nextPipe availablePipes APIs. Remove setState API. -configStart marks all pipes available. -configDone garbage-collects unused pipe objects. -nextPipe returns the index of next available pipe and create a corresponding pipe object if not present -availablePipes returns total of "unallocated" pipes. (Pipes could be allocated but unused) Changes in hwc adapt to the new overlay APIs. Compile out MDP comp. Remove unused files in overlay and hwc. Update licenses. Conflicts: libhwcomposer/hwc.cpp libhwcomposer/hwc_utils.cpp Bug: 7626586 Change-Id: Id8e56901d34e5dc0fd088260d05e3e46f68ff090 Signed-off-by: Saurabh Shah <saurshah@codeaurora.org> Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8084/liboverlay/overlayMdssRot.cpp
|