afb0630fd38b3db0e01f243d3112d0b67a93976e |
|
04-Jul-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
qdutils: Parse rotator downscale feature Parse rotator downscale feature from the capabilities sysfs node Change-Id: I346a20d4879682e115eb2f8f74afd41dca31e930
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
52c40f737665f00bf9ecd486b9896ce256c94fd2 |
|
02-Jul-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
qdutils: Add getter for 8994 Add version and getter for 8994 Change-Id: I95a8e4518a763651d7ce3865075fac80d4b3c60b
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
cfb968873b9e94dca883aadabee42b01558faea9 |
|
15-Jun-2014 |
Shalaj Jain <shalajj@codeaurora.org> |
display: remove compiler warnings Use correct typecasts and format specifiers and resolve compiler warnings Change-Id: I51b12ecb78a9a496cf1f76c3d32892a203f70c43
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
e095244acd6350d0898d5a9b409dff2748553bfc |
|
23-May-2014 |
Saurabh Shah <saurshah@codeaurora.org> |
hwc: Source Split layers always if indicated by driver Source Split layers always if the driver indicates so by setting the src_split_always in the capabilities sysfs node. This is applicable to layers whose width > mixer's width, since MDP clk rate is dependent on max(mixer_width, layer_width). This feature can be enabled if the panel height is more than a certain empirically derived value. Splitting always in those cases can help with a lower voltage. Change-Id: If9b33f11ca4132eb77416c26819f7473c65d3b08
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
514cb6b3f43dd8a3d743cbe68f333898d5e981b8 |
|
25-Apr-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
hwc: Support single ROI for split panels. For panels that cannot accept commands in both the interfaces, we cannot send two ROI's (for each half). We merge them into single ROI and split them across lSplit for MDP mixer use. The ROI's will be merged again finally before updating the panel in the driver. - Reads panel property of dual control path. - If dual control path not supported, merge ROI's before analysing for composition strategies. Change-Id: I67e361a299dc5d1adb28b180900e24633eefc4a8
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
26ca824f5a1e6adb8038a103c27139c163bb0660 |
|
12-May-2014 |
Prabhanjan Kandula <pkandula@codeaurora.org> |
qdutils : Add mdp revision for 8x39. Add mdp revision check for 8x39 to facilitate any target specific checks with in HAL. Change-Id: I115f4c8e54a11d240d02662eddce86c7528d3b19
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
29e3491d8c71a426903f0194a9a40a75bde825b3 |
|
05-Apr-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
h/q/d: Read minimum width and height values of the panel ROI Read minimum width and height restrictions on ROI of a panel through sysfs node. Change-Id: I0e4c35cdcaee06e77955725565cfbed2f0fd91e9
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
3c3c2482b748934e34ed89214c7f94042c35b751 |
|
12-Apr-2014 |
Naseer Ahmed <naseer@codeaurora.org> |
mdp_version: Check define for each version Some of the definitions may not be present on AOSP builds while other may. Check each definition to be sure. Change-Id: Ia3cf8f024a3a6b6633a3be4646579f6cde0d5580
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
962c5d172ef0503585834d4bb037a856dd74bb7f |
|
06-Mar-2014 |
Jeykumar Sankaran <jsanka@codeaurora.org> |
libqdutils: Update panel capabilities from sys node This change adds support to read more panel related informations from sys node. Change-Id: I64f37a35945ac700388335059cbb1cfbc9d4b4d7
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
0fdae193307fb17bb537598ab62682edd5138b72 |
|
13-Mar-2014 |
radhakrishna <radhakrishna@codeaurora.org> |
h/q/d: Add utility function for 8x16 and read RGB scalar capability - Add utility function for 8x16 - Add internal function to identify if RGB doesn't support scaling that is read from capabilities node. - If UI layer needs scaling and RGB pipe doesn't support scalar, request a VG pipe - On 8x16, request DMA pipe for WFD Change-Id: I94e8e0371bb10fcad53fddd2b7c45bc9b2594a4d
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
a653efede03423aa840da24634f1ec6f20796f1e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224"" This reverts commit 90268aeae4a80fdce99db4a4e45d696afd4fff36.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
ef53c1c84ec55ed50f607d52b7abfbb86239408e |
|
09-Apr-2014 |
Simon Wilson <simonwilson@google.com> |
Revert "Revert "split msm8x26 and msm8x74 display HALs apart"" This reverts commit 13236c4d3582dd6f7185a303c4795ea611edbfe3.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
13236c4d3582dd6f7185a303c4795ea611edbfe3 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "split msm8x26 and msm8x74 display HALs apart" This reverts commit 32d546383b4424a954987570731f7fa216bce206.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
90268aeae4a80fdce99db4a4e45d696afd4fff36 |
|
07-Apr-2014 |
Benoit Goby <benoit@android.com> |
Revert "msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224" This reverts commit f96e0b957a215582702db2a5ec6c744afd94eae3.
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
f96e0b957a215582702db2a5ec6c744afd94eae3 |
|
28-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
msm8226: update to AU_LINUX_ANDROID_KK.04.04.02.010.224 Change-Id: Ia9af631171fb9ec64de1d1cb0ddf5be3e0fe9132 Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|
32d546383b4424a954987570731f7fa216bce206 |
|
18-Mar-2014 |
Iliyan Malchev <malchev@google.com> |
split msm8x26 and msm8x74 display HALs apart Change-Id: I58a7dc129faa6eef4f7cdc8ee09fd42cd86c189b Signed-off-by: Iliyan Malchev <malchev@google.com>
/hardware/qcom/display/msm8226/libqdutils/mdp_version.cpp
|