| 72579d94ed598c55a7faa2bedcb2689c7353b579 |
|
28-Aug-2015 |
Naseer Ahmed <naseer@codeaurora.org> |
hwc: Silence log for unsupported layers
In some cases, external displays may be driven by the primary
vsync with the primary not having any layers to compose. Do not
log in such cases.
Bug: 23487270
Change-Id: If72cb690692faa26bb4132c0f473b8b413be2bee
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| a2f8c1e71fe985a5306dd303850e9862d422249c |
|
06-Aug-2015 |
Naseer Ahmed <naseer@codeaurora.org> |
hwc: mdpcomp: one full screen update in screen refresh
When screen refresh is triggered, make sure at least one
full screen update when partial update is enabled.
Screen refresh is requested after post processing has been
sent to kernel, full screen update is needed so that the
pp setting applies to the whole screen.
Change-Id: I7885c451a313666c1fcef8c3d55cb86b8479de1c
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 41ac35e73491eb7e3337abe257c042dac4ad2e1f |
|
14-Aug-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Start with ROI set to destination
Some layers will not have surfaceDamage information,
like video and CPU rendered, so consider their destination
as the surfaceDamage. For other layers start with destination
will be calculated based on the surfaceDamage
Change-Id: Ic7308bf9dfb7d062596873963c738f644b1c1a84
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 298391fb24e1303c50b9d4172efe2bb9940114fa |
|
10-Jul-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Fix ROI generation for source split
- When generating ROI for SourceSplit case, check if the display
is split and accordingly calculate right roi
- Assign correct lRoi and rRoi in hwc_commit
Change-Id: Ie41e1f08e8f039f3548fa12be695c807d77a0b2e
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| de608742bddfc2840f4d49932884e9e62a3b8f0d |
|
29-May-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: mdpcomp: Add surfaceDamage calculation with SrcSplit.
Use surfaceDamage in calculating the final dirtyRect in
case of generating the ROI for SourceSplit
Change-Id: Ibe2347c49e07ec40a3369f6970371437b81874cd
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 72aecbe8c0c4398ea5c996b913cda6adf2e01659 |
|
29-May-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: use surfaceDamage to calculate the dirtyrect as per HWC 1.5
Update the HWC version to HWC 1.5
surfaceDamage is passed as part of the layer, use this information
to determine if the layer is changing and handle cache.
The total dirty rectangle for a given layer will be the sum of all
the damageRectangles, use that to calculate the ROI
Change-Id: Iddff278e716099d252e059aae02764f4b8630a6f
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 9f4ab24b0f20c60739a93172d548ece1f88f6f87 |
|
29-May-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Partial update support for ping pong split.
ping-pong split needs source split to be enabled to stage two
pipes of a layer in the same Z order. This change adds partial
update support to generate ROI when source split is enabled.
When configured, ping-pong-split splits the layer mixer output
equally across two DSI's. To meet this limitation, the generated
ROI is adjusted to have equal widths from the panel mid point.
Acked-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Change-Id: Ic307a1d5b902af9e352b0dfc6f5ab474ecd9c8a4
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 4986a66403dd53ee83d1b58cfc2c0cfd95e73112 |
|
29-May-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Reset the refresh rate alone to avoid stack corruption.
In early return calls of prepare, reset the refresh rate
irrespective of layer properties to avoid stack corruption.
Acked-by: Praveena Pachipulusu<pveena@codeaurora.org>
Change-Id: I5a04e111b1f10a6cb807459c7693d049c454edaa
CRs-Fixed: 838902
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 3bc091ceb76fc796bb0264678db9b3c9479dadfb |
|
24-Feb-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: mdpcomp: Remove the perf lock acquire log message
Perf lock acquire would fail during the boot up as the perfd
service is not up yet.
Its harmless to remove these logs which cause false alarm
Change-Id: Id305f3122a77ebe70819e4b3edfaf405c3a87d70
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| fb06969f70d5810f844f5a4682f42b602ed1a152 |
|
05-Feb-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
hwc: Use 1 pipe if rotator downscale reduces dimensions
If rotator downscale is able to reduce output dimensions below
MDP's pipe limits, then use only 1 pipe if possible in source split
cases.
Acked-by: Saurabh Shah <saurshah@codeaurora.org>
Change-Id: I6739a1fcd32b1047ce266d60c0123961c9daa657
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| a4a71c6d0a4553a9edbbd2398ea05032abe395d6 |
|
29-Jan-2015 |
Arun Kumar K.R <akumarkr@codeaurora.org> |
liboverlay: Fix pipe priority mismatch on new allocations
With source split enabled:
1) When both LEFT and RIGHT pipes gets reused pipes, we use their
pipe id's to compare their priority and swap them as needed.
2) When both LEFT and RIGHT pipes needs to be newly allocated, we
let driver take care of the priority as long as both pipes are
of same type. If different, we swap them according to the pipe
type priority.
3) When LEFT is reused and RIGHT needs new allocation, we swap
them only when they need same pipe type and LEFT has the
pipe with lowest priority.
4) When RIGHT is reused and LEFT needs new allocation, we swap
them only when they need same pipe type and RIGHT has the
pipe with highest priority.
Acked-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Change-Id: I320285aaca7ffc032e3b3b0832380a9c705bc4fc
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|
| 054df959aef7dce630a7f41d4aba6626c130756b |
|
12-Mar-2015 |
Patrick Tjin <pattjin@google.com> |
msm8994: import msm8994/msm8992 display code
AU_LINUX_ANDROID_LA.BF64.1.2.1_RB1.05.00.00.019.037
Change-Id: Ie94c9207ea736a114bfdf4f35d372ccc326d7207
Signed-off-by: Patrick Tjin <pattjin@google.com>
/hardware/qcom/display/msm8994/libhwcomposer/hwc_mdpcomp.cpp
|