1#!/bin/bash
2#
3# Copyright (C) 2007 The Android Open Source Project
4#
5# Licensed under the Apache License, Version 2.0 (the "License");
6# you may not use this file except in compliance with the License.
7# You may obtain a copy of the License at
8#
9#     http://www.apache.org/licenses/LICENSE-2.0
10#
11# Unless required by applicable law or agreed to in writing, software
12# distributed under the License is distributed on an "AS IS" BASIS,
13# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14# See the License for the specific language governing permissions and
15# limitations under the License.
16
17# Set up prog to be the path of this script, including following symlinks,
18# and set up progdir to be the fully-qualified pathname of its directory.
19prog="$0"
20while [ -h "${prog}" ]; do
21    newProg=`/bin/ls -ld "${prog}"`
22    newProg=`expr "${newProg}" : ".* -> \(.*\)$"`
23    if expr "x${newProg}" : 'x/' >/dev/null; then
24        prog="${newProg}"
25    else
26        progdir=`dirname "${prog}"`
27        prog="${progdir}/${newProg}"
28    fi
29done
30oldwd=`pwd`
31progdir=`dirname "${prog}"`
32cd "${progdir}"
33progdir=`pwd`
34prog="${progdir}"/`basename "${prog}"`
35
36run_args=""
37usage="no"
38sequental="no"
39
40while true; do
41    if [ "x$1" = "x--host" ]; then
42        run_args="${run_args} --host"
43        shift
44    elif [ "x$1" = "x--use-java-home" ]; then
45        run_args="${run_args} --use-java-home"
46        shift
47    elif [ "x$1" = "x--no-image" ]; then
48        run_args="${run_args} --no-image"
49        shift
50    elif [ "x$1" = "x--optimizing" ]; then
51        run_args="${run_args} --optimizing"
52        shift
53    elif [ "x$1" = "x--image" ]; then
54        run_args="${run_args} --image"
55        shift
56    elif [ "x$1" = "x--never-clean" ]; then
57        run_args="${run_args} --never-clean"
58        shift
59    elif [ "x$1" = "x--jvm" ]; then
60        run_args="${run_args} --jvm"
61        shift
62    elif [ "x$1" = "x--debug" ]; then
63        run_args="${run_args} --debug"
64        shift
65    elif [ "x$1" = "x--build-only" ]; then
66        run_args="${run_args} --build-only"
67        shift
68    elif [ "x$1" = "x--build-with-jack" ]; then
69        run_args="${run_args} --build-with-jack"
70        shift
71    elif [ "x$1" = "x--build-with-javac-dx" ]; then
72        run_args="${run_args} --build-with-javac-dx"
73        shift
74    elif [ "x$1" = "x--dex2oat-swap" ]; then
75        run_args="${run_args} --dex2oat-swap"
76        shift
77    elif [ "x$1" = "x--dalvik" ]; then
78        run_args="${run_args} --dalvik"
79        shift
80    elif [ "x$1" = "x--debuggable" ]; then
81        run_args="${run_args} --debuggable"
82        shift
83    elif [ "x$1" = "x--zygote" ]; then
84        run_args="${run_args} --zygote"
85        shift
86    elif [ "x$1" = "x--interpreter" ]; then
87        run_args="${run_args} --interpreter"
88        shift
89    elif [ "x$1" = "x--jit" ]; then
90        run_args="${run_args} --jit"
91        shift
92    elif [ "x$1" = "x--verify-soft-fail" ]; then
93        run_args="${run_args} --verify-soft-fail"
94        shift
95    elif [ "x$1" = "x--no-verify" ]; then
96        run_args="${run_args} --no-verify"
97        shift
98    elif [ "x$1" = "x--no-optimize" ]; then
99        run_args="${run_args} --no-optimize"
100        shift
101    elif [ "x$1" = "x--dev" ]; then
102        run_args="${run_args} --dev"
103        shift
104    elif [ "x$1" = "x--update" ]; then
105        run_args="${run_args} --update"
106        shift
107    elif [ "x$1" = "x--help" ]; then
108        usage="yes"
109        shift
110    elif [ "x$1" = "x--seq" ]; then
111        sequental="yes"
112        shift
113    elif [ "x$1" = "x-O" ]; then
114        run_args="${run_args} -O"
115        shift
116    elif [ "x$1" = "x--64" ]; then
117        run_args="${run_args} --64"
118        shift
119    elif [ "x$1" = "x--gcstress" ]; then
120        run_args="${run_args} --gcstress"
121        shift
122    elif [ "x$1" = "x--gcverify" ]; then
123        run_args="${run_args} --gcverify"
124        shift
125    elif [ "x$1" = "x--trace" ]; then
126        run_args="${run_args} --trace"
127        shift
128    elif [ "x$1" = "x--relocate" ]; then
129        run_args="${run_args} --relocate"
130        shift
131    elif [ "x$1" = "x--no-relocate" ]; then
132        run_args="${run_args} --no-relocate"
133        shift
134    elif [ "x$1" = "x--no-prebuild" ]; then
135        run_args="${run_args} --no-prebuild"
136        shift;
137    elif [ "x$1" = "x--prebuild" ]; then
138        run_args="${run_args} --prebuild"
139        shift;
140    elif [ "x$1" = "x--no-dex2oat" ]; then
141        run_args="${run_args} --no-dex2oat"
142        shift;
143    elif [ "x$1" = "x--no-patchoat" ]; then
144        run_args="${run_args} --no-patchoat"
145        shift;
146    elif [ "x$1" = "x--always-clean" ]; then
147        run_args="${run_args} --always-clean"
148        shift
149    elif [ "x$1" = "x--pic-test" ]; then
150        run_args="${run_args} --pic-test"
151        shift
152    elif [ "x$1" = "x--pic-image" ]; then
153        run_args="${run_args} --pic-image"
154        shift
155    elif [ "x$1" = "x--strace" ]; then
156        run_args="${run_args} --strace"
157        shift
158    elif expr "x$1" : "x--" >/dev/null 2>&1; then
159        echo "unknown $0 option: $1" 1>&2
160        usage="yes"
161        break
162    else
163        break
164    fi
165done
166
167if [ "$usage" = "yes" ]; then
168    prog=`basename $prog`
169    (
170        echo "usage:"
171        echo "  $prog --help     Print this message."
172        echo "  $prog [options]  Run all tests with the given options."
173        echo "  Options are all passed to run-test; refer to that for " \
174             "further documentation:"
175        echo "    --debug --dev --host --interpreter --jit --jvm --no-optimize"
176        echo "    --no-verify --verify-soft-fail -O --update --zygote --64"
177        echo "    --relocate --prebuild --always-clean --gcstress --gcverify"
178        echo "    --trace --no-patchoat --no-dex2oat --use-java-home --pic-image"
179        echo "    --pic-test --strace --debuggable --dalvik --dex2oat-swap"
180        echo "    --build-only --build-with-jack --build-with-javac-dx"
181        echo "    --never-clean --image --no-image --optimizing"
182        echo "    --no-relocate --no-prebuild"
183        echo "  Specific Runtime Options:"
184        echo "    --seq                Run tests one-by-one, avoiding failures caused by busy CPU"
185    ) 1>&2
186    exit 1
187fi
188
189if [ "$sequental" == "yes" ]; then
190  i=0
191  for test_name in *; do
192    if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then
193      ./run-test ${run_args} "$test_name"
194      RES=$?
195      test_pids[i]=i
196      test_names[test_pids[i]]="$test_name"
197      if [ "$RES" != "0" ]; then
198        let failure_count+=1
199        failed_test_names="$failed_test_names ${test_names[i]}"
200      else
201        let succeeded_count+=1
202      fi
203      let i+=1
204    fi
205  done
206else
207  # start all the tests
208  i=0
209  for test_name in *; do
210    if [ -d "$test_name" -a -r "$test_name" -a -r "$test_name/info.txt" ]; then
211      ./run-test ${run_args} "$test_name" &
212      test_pids[i]=$!
213      test_names[test_pids[i]]="$test_name"
214      let i+=1
215    fi
216  done
217
218  # wait for all the tests, collecting the failures
219  failure_count=0
220  succeeded_count=0
221  failed_test_names=""
222  for pid in ${test_pids[@]}; do
223    wait $pid
224    if [ "$?" != "0" ]; then
225      let failure_count+=1
226      failed_test_names="$failed_test_names ${test_names[$pid]}[pid=$pid]"
227    else
228      let succeeded_count+=1
229    fi
230  done
231fi
232
233echo "succeeded tests: $succeeded_count"
234echo "failed tests: $failure_count"
235
236for i in $failed_test_names; do
237  echo "failed: $i"
238done
239