1/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) 2 * All rights reserved. 3 * 4 * This package is an SSL implementation written 5 * by Eric Young (eay@cryptsoft.com). 6 * The implementation was written so as to conform with Netscapes SSL. 7 * 8 * This library is free for commercial and non-commercial use as long as 9 * the following conditions are aheared to. The following conditions 10 * apply to all code found in this distribution, be it the RC4, RSA, 11 * lhash, DES, etc., code; not just the SSL code. The SSL documentation 12 * included with this distribution is covered by the same copyright terms 13 * except that the holder is Tim Hudson (tjh@cryptsoft.com). 14 * 15 * Copyright remains Eric Young's, and as such any Copyright notices in 16 * the code are not to be removed. 17 * If this package is used in a product, Eric Young should be given attribution 18 * as the author of the parts of the library used. 19 * This can be in the form of a textual message at program startup or 20 * in documentation (online or textual) provided with the package. 21 * 22 * Redistribution and use in source and binary forms, with or without 23 * modification, are permitted provided that the following conditions 24 * are met: 25 * 1. Redistributions of source code must retain the copyright 26 * notice, this list of conditions and the following disclaimer. 27 * 2. Redistributions in binary form must reproduce the above copyright 28 * notice, this list of conditions and the following disclaimer in the 29 * documentation and/or other materials provided with the distribution. 30 * 3. All advertising materials mentioning features or use of this software 31 * must display the following acknowledgement: 32 * "This product includes cryptographic software written by 33 * Eric Young (eay@cryptsoft.com)" 34 * The word 'cryptographic' can be left out if the rouines from the library 35 * being used are not cryptographic related :-). 36 * 4. If you include any Windows specific code (or a derivative thereof) from 37 * the apps directory (application code) you must include an acknowledgement: 38 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" 39 * 40 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND 41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 43 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 50 * SUCH DAMAGE. 51 * 52 * The licence and distribution terms for any publically available version or 53 * derivative of this code cannot be changed. i.e. this code cannot simply be 54 * copied and put under another distribution licence 55 * [including the GNU Public Licence.] */ 56 57#ifndef OPENSSL_HEADER_BIO_H 58#define OPENSSL_HEADER_BIO_H 59 60#include <openssl/base.h> 61 62#include <stdio.h> /* For FILE */ 63 64#include <openssl/err.h> /* for ERR_print_errors_fp */ 65#include <openssl/ex_data.h> 66#include <openssl/stack.h> 67#include <openssl/thread.h> 68 69#if defined(__cplusplus) 70extern "C" { 71#endif 72 73 74/* BIO abstracts over a file-descriptor like interface. */ 75 76 77/* Allocation and freeing. */ 78 79/* BIO_new creates a new BIO with the given type and a reference count of one. 80 * It returns the fresh |BIO|, or NULL on error. */ 81OPENSSL_EXPORT BIO *BIO_new(const BIO_METHOD *type); 82 83/* BIO_free decrements the reference count of |bio|. If the reference count 84 * drops to zero, it (optionally) calls the BIO's callback with |BIO_CB_FREE|, 85 * frees the ex_data and then, if the BIO has a destroy callback for the 86 * method, calls it. Finally it frees |bio| itself. It then repeats that for 87 * the next BIO in the chain, if any. 88 * 89 * It returns one on success or zero otherwise. */ 90OPENSSL_EXPORT int BIO_free(BIO *bio); 91 92/* BIO_vfree performs the same actions as |BIO_free|, but has a void return 93 * value. This is provided for API-compat. 94 * 95 * TODO(fork): remove. */ 96OPENSSL_EXPORT void BIO_vfree(BIO *bio); 97 98/* BIO_up_ref increments the reference count of |bio| and returns it. */ 99OPENSSL_EXPORT BIO *BIO_up_ref(BIO *bio); 100 101 102/* Basic I/O. */ 103 104/* BIO_read attempts to read |len| bytes into |data|. It returns the number of 105 * bytes read, zero on EOF, or a negative number on error. */ 106OPENSSL_EXPORT int BIO_read(BIO *bio, void *data, int len); 107 108/* BIO_gets "reads a line" from |bio| and puts at most |size| bytes into |buf|. 109 * It returns the number of bytes read or a negative number on error. The 110 * phrase "reads a line" is in quotes in the previous sentence because the 111 * exact operation depends on the BIO's method. For example, a digest BIO will 112 * return the digest in response to a |BIO_gets| call. 113 * 114 * TODO(fork): audit the set of BIOs that we end up needing. If all actually 115 * return a line for this call, remove the warning above. */ 116OPENSSL_EXPORT int BIO_gets(BIO *bio, char *buf, int size); 117 118/* BIO_write writes |len| bytes from |data| to BIO. It returns the number of 119 * bytes written or a negative number on error. */ 120OPENSSL_EXPORT int BIO_write(BIO *bio, const void *data, int len); 121 122/* BIO_puts writes a NUL terminated string from |buf| to |bio|. It returns the 123 * number of bytes written or a negative number on error. */ 124OPENSSL_EXPORT int BIO_puts(BIO *bio, const char *buf); 125 126/* BIO_flush flushes any buffered output. It returns one on success and zero 127 * otherwise. */ 128OPENSSL_EXPORT int BIO_flush(BIO *bio); 129 130 131/* Low-level control functions. 132 * 133 * These are generic functions for sending control requests to a BIO. In 134 * general one should use the wrapper functions like |BIO_get_close|. */ 135 136/* BIO_ctrl sends the control request |cmd| to |bio|. The |cmd| argument should 137 * be one of the |BIO_C_*| values. */ 138OPENSSL_EXPORT long BIO_ctrl(BIO *bio, int cmd, long larg, void *parg); 139 140/* BIO_ptr_ctrl acts like |BIO_ctrl| but passes the address of a |void*| 141 * pointer as |parg| and returns the value that is written to it, or NULL if 142 * the control request returns <= 0. */ 143OPENSSL_EXPORT char *BIO_ptr_ctrl(BIO *bp, int cmd, long larg); 144 145/* BIO_int_ctrl acts like |BIO_ctrl| but passes the address of a copy of |iarg| 146 * as |parg|. */ 147OPENSSL_EXPORT long BIO_int_ctrl(BIO *bp, int cmd, long larg, int iarg); 148 149/* BIO_reset resets |bio| to its initial state, the precise meaning of which 150 * depends on the concrete type of |bio|. It returns one on success and zero 151 * otherwise. */ 152OPENSSL_EXPORT int BIO_reset(BIO *bio); 153 154/* BIO_set_flags ORs |flags| with |bio->flags|. */ 155OPENSSL_EXPORT void BIO_set_flags(BIO *bio, int flags); 156 157/* BIO_test_flags returns |bio->flags| AND |flags|. */ 158OPENSSL_EXPORT int BIO_test_flags(const BIO *bio, int flags); 159 160/* BIO_should_read returns non-zero if |bio| encountered a temporary error 161 * while reading (i.e. EAGAIN), indicating that the caller should retry the 162 * read. */ 163OPENSSL_EXPORT int BIO_should_read(const BIO *bio); 164 165/* BIO_should_write returns non-zero if |bio| encountered a temporary error 166 * while writing (i.e. EAGAIN), indicating that the caller should retry the 167 * write. */ 168OPENSSL_EXPORT int BIO_should_write(const BIO *bio); 169 170/* BIO_should_retry returns non-zero if the reason that caused a failed I/O 171 * operation is temporary and thus the operation should be retried. Otherwise, 172 * it was a permanent error and it returns zero. */ 173OPENSSL_EXPORT int BIO_should_retry(const BIO *bio); 174 175/* BIO_should_io_special returns non-zero if |bio| encountered a temporary 176 * error while performing a special I/O operation, indicating that the caller 177 * should retry. The operation that caused the error is returned by 178 * |BIO_get_retry_reason|. */ 179OPENSSL_EXPORT int BIO_should_io_special(const BIO *bio); 180 181/* BIO_RR_SSL_X509_LOOKUP indicates that an SSL BIO blocked because the SSL 182 * library returned with SSL_ERROR_WANT_X509_LOOKUP. 183 * 184 * TODO(fork): remove. */ 185#define BIO_RR_SSL_X509_LOOKUP 0x01 186 187/* BIO_RR_CONNECT indicates that a connect would have blocked */ 188#define BIO_RR_CONNECT 0x02 189 190/* BIO_RR_ACCEPT indicates that an accept would have blocked */ 191#define BIO_RR_ACCEPT 0x03 192 193/* BIO_RR_SSL_CHANNEL_ID_LOOKUP indicates that the ChannelID code cannot find 194 * a private key for a TLS connection. */ 195#define BIO_RR_SSL_CHANNEL_ID_LOOKUP 0x04 196 197/* BIO_get_retry_reason returns the special I/O operation that needs to be 198 * retried. The return value is one of the |BIO_RR_*| values. */ 199OPENSSL_EXPORT int BIO_get_retry_reason(const BIO *bio); 200 201/* BIO_clear_flags ANDs |bio->flags| with the bitwise-complement of |flags|. */ 202OPENSSL_EXPORT void BIO_clear_flags(BIO *bio, int flags); 203 204/* BIO_set_retry_read sets the |BIO_FLAGS_READ| and |BIO_FLAGS_SHOULD_RETRY| 205 * flags on |bio|. */ 206OPENSSL_EXPORT void BIO_set_retry_read(BIO *bio); 207 208/* BIO_set_retry_write sets the |BIO_FLAGS_WRITE| and |BIO_FLAGS_SHOULD_RETRY| 209 * flags on |bio|. */ 210OPENSSL_EXPORT void BIO_set_retry_write(BIO *bio); 211 212/* BIO_get_retry_flags gets the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|, 213 * |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|. */ 214OPENSSL_EXPORT int BIO_get_retry_flags(BIO *bio); 215 216/* BIO_clear_retry_flags clears the |BIO_FLAGS_READ|, |BIO_FLAGS_WRITE|, 217 * |BIO_FLAGS_IO_SPECIAL| and |BIO_FLAGS_SHOULD_RETRY| flags from |bio|. */ 218OPENSSL_EXPORT void BIO_clear_retry_flags(BIO *bio); 219 220/* BIO_method_type returns the type of |bio|, which is one of the |BIO_TYPE_*| 221 * values. */ 222OPENSSL_EXPORT int BIO_method_type(const BIO *bio); 223 224/* bio_info_cb is the type of a callback function that can be called for most 225 * BIO operations. The |event| argument is one of |BIO_CB_*| and can be ORed 226 * with |BIO_CB_RETURN| if the callback is being made after the operation in 227 * question. In that case, |return_value| will contain the return value from 228 * the operation. */ 229typedef long (*bio_info_cb)(BIO *bio, int event, const char *parg, int cmd, 230 long larg, long return_value); 231 232/* BIO_callback_ctrl allows the callback function to be manipulated. The |cmd| 233 * arg will generally be |BIO_CTRL_SET_CALLBACK| but arbitary command values 234 * can be interpreted by the |BIO|. */ 235OPENSSL_EXPORT long BIO_callback_ctrl(BIO *bio, int cmd, bio_info_cb fp); 236 237/* BIO_pending returns the number of bytes pending to be read. */ 238OPENSSL_EXPORT size_t BIO_pending(const BIO *bio); 239 240/* BIO_ctrl_pending calls |BIO_pending| and exists only for compatibility with 241 * OpenSSL. */ 242OPENSSL_EXPORT size_t BIO_ctrl_pending(const BIO *bio); 243 244/* BIO_wpending returns the number of bytes pending to be written. */ 245OPENSSL_EXPORT size_t BIO_wpending(const BIO *bio); 246 247/* BIO_set_close sets the close flag for |bio|. The meaning of which depends on 248 * the type of |bio| but, for example, a memory BIO interprets the close flag 249 * as meaning that it owns its buffer. It returns one on success and zero 250 * otherwise. */ 251OPENSSL_EXPORT int BIO_set_close(BIO *bio, int close_flag); 252 253/* BIO_set_callback sets a callback function that will be called before and 254 * after most operations. See the comment above |bio_info_cb|. */ 255OPENSSL_EXPORT void BIO_set_callback(BIO *bio, bio_info_cb callback_func); 256 257/* BIO_set_callback_arg sets the opaque pointer value that can be read within a 258 * callback with |BIO_get_callback_arg|. */ 259OPENSSL_EXPORT void BIO_set_callback_arg(BIO *bio, char *arg); 260 261/* BIO_get_callback_arg returns the last value of the opaque callback pointer 262 * set by |BIO_set_callback_arg|. */ 263OPENSSL_EXPORT char *BIO_get_callback_arg(const BIO *bio); 264 265/* BIO_number_read returns the number of bytes that have been read from 266 * |bio|. */ 267OPENSSL_EXPORT size_t BIO_number_read(const BIO *bio); 268 269/* BIO_number_written returns the number of bytes that have been written to 270 * |bio|. */ 271OPENSSL_EXPORT size_t BIO_number_written(const BIO *bio); 272 273 274/* Managing chains of BIOs. 275 * 276 * BIOs can be put into chains where the output of one is used as the input of 277 * the next etc. The most common case is a buffering BIO, which accepts and 278 * buffers writes until flushed into the next BIO in the chain. */ 279 280/* BIO_push adds |appended_bio| to the end of the chain with |bio| at the head. 281 * It returns |bio|. Note that |appended_bio| may be the head of a chain itself 282 * and thus this function can be used to join two chains. 283 * 284 * BIO_push takes ownership of the caller's reference to |appended_bio|. */ 285OPENSSL_EXPORT BIO *BIO_push(BIO *bio, BIO *appended_bio); 286 287/* BIO_pop removes |bio| from the head of a chain and returns the next BIO in 288 * the chain, or NULL if there is no next BIO. 289 * 290 * The caller takes ownership of the chain's reference to |bio|. */ 291OPENSSL_EXPORT BIO *BIO_pop(BIO *bio); 292 293/* BIO_next returns the next BIO in the chain after |bio|, or NULL if there is 294 * no such BIO. */ 295OPENSSL_EXPORT BIO *BIO_next(BIO *bio); 296 297/* BIO_free_all calls |BIO_free|. 298 * 299 * TODO(fork): update callers and remove. */ 300OPENSSL_EXPORT void BIO_free_all(BIO *bio); 301 302/* BIO_find_type walks a chain of BIOs and returns the first that matches 303 * |type|, which is one of the |BIO_TYPE_*| values. */ 304OPENSSL_EXPORT BIO *BIO_find_type(BIO *bio, int type); 305 306/* BIO_copy_next_retry sets the retry flags and |retry_reason| of |bio| from 307 * the next BIO in the chain. */ 308OPENSSL_EXPORT void BIO_copy_next_retry(BIO *bio); 309 310 311/* Printf functions. 312 * 313 * These functions are versions of printf functions that output to a BIO rather 314 * than a FILE. */ 315#ifdef __GNUC__ 316#define __bio_h__attr__ __attribute__ 317#else 318#define __bio_h__attr__(x) 319#endif 320OPENSSL_EXPORT int BIO_printf(BIO *bio, const char *format, ...) 321 __bio_h__attr__((__format__(__printf__, 2, 3))); 322#undef __bio_h__attr__ 323 324 325/* Utility functions. */ 326 327/* BIO_indent prints min(|indent|, |max_indent|) spaces. It returns one on 328 * success and zero otherwise. */ 329OPENSSL_EXPORT int BIO_indent(BIO *bio, unsigned indent, unsigned max_indent); 330 331/* BIO_hexdump writes a hex dump of |data| to |bio|. Each line will be indented 332 * by |indent| spaces. */ 333OPENSSL_EXPORT int BIO_hexdump(BIO *bio, const uint8_t *data, size_t len, 334 unsigned indent); 335 336/* BIO_print_errors prints the current contents of the error stack to |bio| 337 * using human readable strings where possible. */ 338OPENSSL_EXPORT void BIO_print_errors(BIO *bio); 339 340/* BIO_read_asn1 reads a single ASN.1 object from |bio|. If successful it sets 341 * |*out| to be an allocated buffer (that should be freed with |OPENSSL_free|), 342 * |*out_size| to the length, in bytes, of that buffer and returns one. 343 * Otherwise it returns zero. 344 * 345 * If the length of the object is greater than |max_len| or 2^32 then the 346 * function will fail. Long-form tags are not supported. If the length of the 347 * object is indefinite the full contents of |bio| are read, unless it would be 348 * greater than |max_len|, in which case the function fails. 349 * 350 * If the function fails then some unknown amount of data may have been read 351 * from |bio|. */ 352OPENSSL_EXPORT int BIO_read_asn1(BIO *bio, uint8_t **out, size_t *out_len, 353 size_t max_len); 354 355 356/* Memory BIOs. 357 * 358 * Memory BIOs can be used as a read-only source (with |BIO_new_mem_buf|) or a 359 * writable sink (with |BIO_new|, |BIO_s_mem| and |BIO_get_mem_buf|). Data 360 * written to a writable, memory BIO can be recalled by reading from it. 361 * 362 * Calling |BIO_reset| on a read-only BIO resets it to the original contents. 363 * On a writable BIO, it clears any data. 364 * 365 * If the close flag is set to |BIO_NOCLOSE| (not the default) then the 366 * underlying |BUF_MEM| will not be freed when the |BIO| is freed. 367 * 368 * Memory BIOs support |BIO_gets| and |BIO_puts|. 369 * 370 * |BIO_eof| is true if no data is in the BIO. 371 * 372 * |BIO_ctrl_pending| returns the number of bytes currently stored. */ 373 374/* BIO_s_mem returns a |BIO_METHOD| that uses a in-memory buffer. */ 375OPENSSL_EXPORT const BIO_METHOD *BIO_s_mem(void); 376 377/* BIO_new_mem_buf creates BIO that reads and writes from |len| bytes at |buf|. 378 * It does not take ownership of |buf|. It returns the BIO or NULL on error. 379 * 380 * If |len| is negative, then |buf| is treated as a NUL-terminated string, but 381 * don't depend on this in new code. */ 382OPENSSL_EXPORT BIO *BIO_new_mem_buf(void *buf, int len); 383 384/* BIO_mem_contents sets |*out_contents| to point to the current contents of 385 * |bio| and |*out_len| to contain the length of that data. It returns one on 386 * success and zero otherwise. */ 387OPENSSL_EXPORT int BIO_mem_contents(const BIO *bio, 388 const uint8_t **out_contents, 389 size_t *out_len); 390 391/* BIO_get_mem_data sets |*contents| to point to the current contents of |bio| 392 * and returns the length of the data. 393 * 394 * WARNING: don't use this, use |BIO_mem_contents|. A return value of zero from 395 * this function can mean either that it failed or that the memory buffer is 396 * empty. */ 397OPENSSL_EXPORT long BIO_get_mem_data(BIO *bio, char **contents); 398 399/* BIO_get_mem_ptr sets |*out| to a BUF_MEM containing the current contents of 400 * |bio|. It returns one on success or zero on error. */ 401OPENSSL_EXPORT int BIO_get_mem_ptr(BIO *bio, BUF_MEM **out); 402 403/* BIO_set_mem_buf sets |b| as the contents of |bio|. If |take_ownership| is 404 * non-zero, then |b| will be freed when |bio| is closed. Returns one on 405 * success or zero otherwise. */ 406OPENSSL_EXPORT int BIO_set_mem_buf(BIO *bio, BUF_MEM *b, int take_ownership); 407 408/* BIO_set_mem_eof_return sets the value that will be returned from reading 409 * |bio| when empty. If |eof_value| is zero then an empty memory BIO will 410 * return EOF (that is it will return zero and |BIO_should_retry| will be 411 * false). If |eof_value| is non zero then it will return |eof_value| when it 412 * is empty and it will set the read retry flag (that is |BIO_read_retry| is 413 * true). To avoid ambiguity with a normal positive return value, |eof_value| 414 * should be set to a negative value, typically -1. 415 * 416 * For a read-only BIO, the default is zero (EOF). For a writable BIO, the 417 * default is -1 so that additional data can be written once exhausted. */ 418OPENSSL_EXPORT int BIO_set_mem_eof_return(BIO *bio, int eof_value); 419 420 421/* File descriptor BIOs. 422 * 423 * File descriptor BIOs are wrappers around the system's |read| and |write| 424 * functions. If the close flag is set then then |close| is called on the 425 * underlying file descriptor when the BIO is freed. 426 * 427 * |BIO_reset| attempts to seek the file pointer to the start of file using 428 * |lseek|. 429 * 430 * |BIO_seek| sets the file pointer to position |off| from start of file using 431 * |lseek|. 432 * 433 * |BIO_tell| returns the current file position. */ 434 435/* BIO_s_fd returns a |BIO_METHOD| for file descriptor fds. */ 436OPENSSL_EXPORT const BIO_METHOD *BIO_s_fd(void); 437 438/* BIO_new_fd creates a new file descriptor BIO wrapping |fd|. If |close_flag| 439 * is non-zero, then |fd| will be closed when the BIO is. */ 440OPENSSL_EXPORT BIO *BIO_new_fd(int fd, int close_flag); 441 442/* BIO_set_fd sets the file descriptor of |bio| to |fd|. If |close_flag| is 443 * non-zero then |fd| will be closed when |bio| is. It returns one on success 444 * or zero on error. */ 445OPENSSL_EXPORT int BIO_set_fd(BIO *bio, int fd, int close_flag); 446 447/* BIO_get_fd returns the file descriptor currently in use by |bio| or -1 if 448 * |bio| does not wrap a file descriptor. If there is a file descriptor and 449 * |out_fd| is not NULL, it also sets |*out_fd| to the file descriptor. */ 450OPENSSL_EXPORT int BIO_get_fd(BIO *bio, int *out_fd); 451 452 453/* File BIOs. 454 * 455 * File BIOs are wrappers around a C |FILE| object. 456 * 457 * |BIO_flush| on a file BIO calls |fflush| on the wrapped stream. 458 * 459 * |BIO_reset| attempts to seek the file pointer to the start of file using 460 * |fseek|. 461 * 462 * |BIO_seek| sets the file pointer to the given position from the start of 463 * file using |fseek|. 464 * 465 * |BIO_eof| calls |feof|. 466 * 467 * Setting the close flag causes |fclose| to be called on the stream when the 468 * BIO is freed. */ 469 470/* BIO_s_file returns a BIO_METHOD that wraps a |FILE|. */ 471OPENSSL_EXPORT const BIO_METHOD *BIO_s_file(void); 472 473/* BIO_new_file creates a file BIO by opening |filename| with the given mode. 474 * See the |fopen| manual page for details of the mode argument. */ 475OPENSSL_EXPORT BIO *BIO_new_file(const char *filename, const char *mode); 476 477/* BIO_new_fp creates a new file BIO that wraps the given |FILE|. If 478 * |close_flag| is |BIO_CLOSE|, then |fclose| will be called on |stream| when 479 * the BIO is closed. */ 480OPENSSL_EXPORT BIO *BIO_new_fp(FILE *stream, int close_flag); 481 482/* BIO_get_fp sets |*out_file| to the current |FILE| for |bio|. It returns one 483 * on success and zero otherwise. */ 484OPENSSL_EXPORT int BIO_get_fp(BIO *bio, FILE **out_file); 485 486/* BIO_set_fp sets the |FILE| for |bio|. If |close_flag| is |BIO_CLOSE| then 487 * |fclose| will be called on |file| when |bio| is closed. It returns one on 488 * sucess and zero otherwise. */ 489OPENSSL_EXPORT int BIO_set_fp(BIO *bio, FILE *file, int close_flag); 490 491/* BIO_read_filename opens |filename| for reading and sets the result as the 492 * |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE| 493 * will be closed when |bio| is freed. */ 494OPENSSL_EXPORT int BIO_read_filename(BIO *bio, const char *filename); 495 496/* BIO_write_filename opens |filename| for writing and sets the result as the 497 * |FILE| for |bio|. It returns one on success and zero otherwise. The |FILE| 498 * will be closed when |bio| is freed. */ 499OPENSSL_EXPORT int BIO_write_filename(BIO *bio, const char *filename); 500 501/* BIO_append_filename opens |filename| for appending and sets the result as 502 * the |FILE| for |bio|. It returns one on success and zero otherwise. The 503 * |FILE| will be closed when |bio| is freed. */ 504OPENSSL_EXPORT int BIO_append_filename(BIO *bio, const char *filename); 505 506/* BIO_rw_filename opens |filename| for reading and writing and sets the result 507 * as the |FILE| for |bio|. It returns one on success and zero otherwise. The 508 * |FILE| will be closed when |bio| is freed. */ 509OPENSSL_EXPORT int BIO_rw_filename(BIO *bio, const char *filename); 510 511 512/* Buffer BIOs. 513 * 514 * Buffer BIOs are a filter-type BIO, i.e. they are designed to be used in a 515 * chain of BIOs. They provide buffering to reduce the number of operations on 516 * the underlying BIOs. */ 517 518OPENSSL_EXPORT const BIO_METHOD *BIO_f_buffer(void); 519 520/* BIO_set_read_buffer_size sets the size, in bytes, of the read buffer and 521 * clears it. It returns one on success and zero on failure. */ 522OPENSSL_EXPORT int BIO_set_read_buffer_size(BIO *bio, int buffer_size); 523 524/* BIO_set_write_buffer_size sets the size, in bytes, of the write buffer and 525 * clears it. It returns one on success and zero on failure. */ 526OPENSSL_EXPORT int BIO_set_write_buffer_size(BIO *bio, int buffer_size); 527 528 529/* Socket BIOs. */ 530 531OPENSSL_EXPORT const BIO_METHOD *BIO_s_socket(void); 532 533/* BIO_new_socket allocates and initialises a fresh BIO which will read and 534 * write to the socket |fd|. If |close_flag| is |BIO_CLOSE| then closing the 535 * BIO will close |fd|. It returns the fresh |BIO| or NULL on error. */ 536OPENSSL_EXPORT BIO *BIO_new_socket(int fd, int close_flag); 537 538 539/* Connect BIOs. 540 * 541 * A connection BIO creates a network connection and transfers data over the 542 * resulting socket. */ 543 544OPENSSL_EXPORT const BIO_METHOD *BIO_s_connect(void); 545 546/* BIO_new_connect returns a BIO that connects to the given hostname and port. 547 * The |host_and_optional_port| argument should be of the form 548 * "www.example.com" or "www.example.com:443". If the port is omitted, it must 549 * be provided with |BIO_set_conn_port|. 550 * 551 * It returns the new BIO on success, or NULL on error. */ 552OPENSSL_EXPORT BIO *BIO_new_connect(const char *host_and_optional_port); 553 554/* BIO_set_conn_hostname sets |host_and_optional_port| as the hostname and 555 * optional port that |bio| will connect to. If the port is omitted, it must be 556 * provided with |BIO_set_conn_port|. 557 * 558 * It returns one on success and zero otherwise. */ 559OPENSSL_EXPORT int BIO_set_conn_hostname(BIO *bio, 560 const char *host_and_optional_port); 561 562/* BIO_set_conn_port sets |port_str| as the port or service name that |bio| 563 * will connect to. It returns one on success and zero otherwise. */ 564OPENSSL_EXPORT int BIO_set_conn_port(BIO *bio, const char *port_str); 565 566/* BIO_set_nbio sets whether |bio| will use non-blocking I/O operations. It 567 * returns one on success and zero otherwise. */ 568OPENSSL_EXPORT int BIO_set_nbio(BIO *bio, int on); 569 570 571/* Datagram BIOs. 572 * 573 * TODO(fork): not implemented. */ 574 575#define BIO_CTRL_DGRAM_QUERY_MTU 40 /* as kernel for current MTU */ 576 577#define BIO_CTRL_DGRAM_SET_MTU 42 /* set cached value for MTU. want to use 578 this if asking the kernel fails */ 579 580#define BIO_CTRL_DGRAM_MTU_EXCEEDED 43 /* check whether the MTU was exceed in 581 the previous write operation. */ 582 583#define BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT \ 584 45 /* Next DTLS handshake timeout to adjust socket timeouts */ 585 586#define BIO_CTRL_DGRAM_GET_PEER 46 587 588#define BIO_CTRL_DGRAM_GET_FALLBACK_MTU 47 589 590 591/* BIO Pairs. 592 * 593 * BIO pairs provide a "loopback" like system: a pair of BIOs where data 594 * written to one can be read from the other and vice versa. */ 595 596/* BIO_new_bio_pair sets |*out1| and |*out2| to two freshly created BIOs where 597 * data written to one can be read from the other and vice versa. The 598 * |writebuf1| argument gives the size of the buffer used in |*out1| and 599 * |writebuf2| for |*out2|. It returns one on success and zero on error. */ 600OPENSSL_EXPORT int BIO_new_bio_pair(BIO **out1, size_t writebuf1, BIO **out2, 601 size_t writebuf2); 602 603/* BIO_new_bio_pair_external_buf is the same as |BIO_new_bio_pair| with the 604 * difference that the caller keeps ownership of the write buffers 605 * |ext_writebuf1_len| and |ext_writebuf2_len|. This is useful when using zero 606 * copy API for read and write operations, in cases where the buffers need to 607 * outlive the BIO pairs. It returns one on success and zero on error. */ 608OPENSSL_EXPORT int BIO_new_bio_pair_external_buf(BIO** bio1_p, 609 size_t writebuf1_len, 610 uint8_t* ext_writebuf1, 611 BIO** bio2_p, 612 size_t writebuf2_len, 613 uint8_t* ext_writebuf2); 614 615/* BIO_ctrl_get_read_request returns the number of bytes that the other side of 616 * |bio| tried (unsuccessfully) to read. */ 617OPENSSL_EXPORT size_t BIO_ctrl_get_read_request(BIO *bio); 618 619/* BIO_ctrl_get_write_guarantee returns the number of bytes that |bio| (which 620 * must have been returned by |BIO_new_bio_pair|) will accept on the next 621 * |BIO_write| call. */ 622OPENSSL_EXPORT size_t BIO_ctrl_get_write_guarantee(BIO *bio); 623 624/* BIO_shutdown_wr marks |bio| as closed, from the point of view of the other 625 * side of the pair. Future |BIO_write| calls on |bio| will fail. It returns 626 * one on success and zero otherwise. */ 627OPENSSL_EXPORT int BIO_shutdown_wr(BIO *bio); 628 629 630/* Zero copy versions of BIO_read and BIO_write for BIO pairs. */ 631 632/* BIO_zero_copy_get_read_buf initiates a zero copy read operation. 633 * |out_read_buf| is set to the internal read buffer, and |out_buf_offset| is 634 * set to the current read position of |out_read_buf|. The number of bytes 635 * available for read from |out_read_buf| + |out_buf_offset| is returned in 636 * |out_available_bytes|. Note that this function might report fewer bytes 637 * available than |BIO_pending|, if the internal ring buffer is wrapped. It 638 * returns one on success. In case of error it returns zero and pushes to the 639 * error stack. 640 * 641 * The zero copy read operation is completed by calling 642 * |BIO_zero_copy_get_read_buf_done|. Neither |BIO_zero_copy_get_read_buf| nor 643 * any other I/O read operation may be called while a zero copy read operation 644 * is active. */ 645OPENSSL_EXPORT int BIO_zero_copy_get_read_buf(BIO* bio, 646 uint8_t** out_read_buf, 647 size_t* out_buf_offset, 648 size_t* out_available_bytes); 649 650/* BIO_zero_copy_get_read_buf_done must be called after reading from a BIO using 651 * |BIO_zero_copy_get_read_buf| to finish the read operation. The |bytes_read| 652 * argument is the number of bytes read. 653 * 654 * It returns one on success. In case of error it returns zero and pushes to the 655 * error stack. */ 656OPENSSL_EXPORT int BIO_zero_copy_get_read_buf_done(BIO* bio, size_t bytes_read); 657 658/* BIO_zero_copy_get_write_buf initiates a zero copy write operation. 659 * |out_write_buf| is set to to the internal write buffer, and |out_buf_offset| 660 * is set to the current write position of |out_write_buf|. 661 * The number of bytes available for write from |out_write_buf| + 662 * |out_buf_offset| is returned in |out_available_bytes|. Note that this 663 * function might report fewer bytes available than 664 * |BIO_ctrl_get_write_guarantee|, if the internal buffer is wrapped. It returns 665 * one on success. In case of error it returns zero and pushes to the error 666 * stack. 667 * 668 * The zero copy write operation is completed by calling 669 * |BIO_zero_copy_get_write_buf_done|. Neither |BIO_zero_copy_get_write_buf| 670 * nor any other I/O write operation may be called while a zero copy write 671 * operation is active. */ 672OPENSSL_EXPORT int BIO_zero_copy_get_write_buf(BIO* bio, 673 uint8_t** out_write_buf, 674 size_t* out_buf_offset, 675 size_t* out_available_bytes); 676 677/* BIO_zero_copy_get_write_buf_done must be called after writing to a BIO using 678 * |BIO_zero_copy_get_write_buf| to finish the write operation. The 679 * |bytes_written| argument gives the number of bytes written. 680 * 681 * It returns one on success. In case of error it returns zero and pushes to the 682 * error stack. */ 683OPENSSL_EXPORT int BIO_zero_copy_get_write_buf_done(BIO* bio, 684 size_t bytes_written); 685 686 687/* BIO_NOCLOSE and |BIO_CLOSE| can be used as symbolic arguments when a "close 688 * flag" is passed to a BIO function. */ 689#define BIO_NOCLOSE 0 690#define BIO_CLOSE 1 691 692/* These are passed to the BIO callback */ 693#define BIO_CB_FREE 0x01 694#define BIO_CB_READ 0x02 695#define BIO_CB_WRITE 0x03 696#define BIO_CB_PUTS 0x04 697#define BIO_CB_GETS 0x05 698#define BIO_CB_CTRL 0x06 699 700/* The callback is called before and after the underling operation, 701 * The BIO_CB_RETURN flag indicates if it is after the call */ 702#define BIO_CB_RETURN 0x80 703 704/* These are values of the |cmd| argument to |BIO_ctrl|. */ 705#define BIO_CTRL_RESET 1 /* opt - rewind/zero etc */ 706#define BIO_CTRL_EOF 2 /* opt - are we at the eof */ 707#define BIO_CTRL_INFO 3 /* opt - extra tit-bits */ 708#define BIO_CTRL_SET 4 /* man - set the 'IO' type */ 709#define BIO_CTRL_GET 5 /* man - get the 'IO' type */ 710#define BIO_CTRL_GET_CLOSE 8 /* man - set the 'close' on free */ 711#define BIO_CTRL_SET_CLOSE 9 /* man - set the 'close' on free */ 712#define BIO_CTRL_PENDING 10 /* opt - is their more data buffered */ 713#define BIO_CTRL_FLUSH 11 /* opt - 'flush' buffered output */ 714#define BIO_CTRL_WPENDING 13 /* opt - number of bytes still to write */ 715/* callback is int cb(BIO *bio,state,ret); */ 716#define BIO_CTRL_SET_CALLBACK 14 /* opt - set callback function */ 717#define BIO_CTRL_GET_CALLBACK 15 /* opt - set callback function */ 718#define BIO_CTRL_SET_FILENAME 30 /* BIO_s_file special */ 719 720 721/* Android compatibility section. 722 * 723 * A previous version of BoringSSL used in Android renamed ERR_print_errors_fp 724 * to BIO_print_errors_fp. It has subsequently been renamed back to 725 * ERR_print_errors_fp. */ 726#define BIO_print_errors_fp ERR_print_errors_fp 727 728 729/* Deprecated functions. */ 730 731/* BIO_f_base64 returns a filter |BIO| that base64-encodes data written into 732 * it, and decodes data read from it. |BIO_gets| is not supported. Call 733 * |BIO_flush| when done writing, to signal that no more data are to be 734 * encoded. The flag |BIO_FLAGS_BASE64_NO_NL| may be set to encode all the data 735 * on one line. */ 736OPENSSL_EXPORT const BIO_METHOD *BIO_f_base64(void); 737 738/* ERR_print_errors is an alias for |BIO_print_errors|. */ 739OPENSSL_EXPORT void ERR_print_errors(BIO *bio); 740 741 742/* Private functions */ 743 744#define BIO_FLAGS_READ 0x01 745#define BIO_FLAGS_WRITE 0x02 746#define BIO_FLAGS_IO_SPECIAL 0x04 747#define BIO_FLAGS_RWS (BIO_FLAGS_READ | BIO_FLAGS_WRITE | BIO_FLAGS_IO_SPECIAL) 748#define BIO_FLAGS_SHOULD_RETRY 0x08 749#define BIO_FLAGS_BASE64_NO_NL 0x100 750/* This is used with memory BIOs: it means we shouldn't free up or change the 751 * data in any way. */ 752#define BIO_FLAGS_MEM_RDONLY 0x200 753 754/* These are the 'types' of BIOs */ 755#define BIO_TYPE_NONE 0 756#define BIO_TYPE_MEM (1 | 0x0400) 757#define BIO_TYPE_FILE (2 | 0x0400) 758#define BIO_TYPE_FD (4 | 0x0400 | 0x0100) 759#define BIO_TYPE_SOCKET (5 | 0x0400 | 0x0100) 760#define BIO_TYPE_NULL (6 | 0x0400) 761#define BIO_TYPE_SSL (7 | 0x0200) 762#define BIO_TYPE_MD (8 | 0x0200) /* passive filter */ 763#define BIO_TYPE_BUFFER (9 | 0x0200) /* filter */ 764#define BIO_TYPE_CIPHER (10 | 0x0200) /* filter */ 765#define BIO_TYPE_BASE64 (11 | 0x0200) /* filter */ 766#define BIO_TYPE_CONNECT (12 | 0x0400 | 0x0100) /* socket - connect */ 767#define BIO_TYPE_ACCEPT (13 | 0x0400 | 0x0100) /* socket for accept */ 768#define BIO_TYPE_PROXY_CLIENT (14 | 0x0200) /* client proxy BIO */ 769#define BIO_TYPE_PROXY_SERVER (15 | 0x0200) /* server proxy BIO */ 770#define BIO_TYPE_NBIO_TEST (16 | 0x0200) /* server proxy BIO */ 771#define BIO_TYPE_NULL_FILTER (17 | 0x0200) 772#define BIO_TYPE_BER (18 | 0x0200) /* BER -> bin filter */ 773#define BIO_TYPE_BIO (19 | 0x0400) /* (half a) BIO pair */ 774#define BIO_TYPE_LINEBUFFER (20 | 0x0200) /* filter */ 775#define BIO_TYPE_DGRAM (21 | 0x0400 | 0x0100) 776#define BIO_TYPE_ASN1 (22 | 0x0200) /* filter */ 777#define BIO_TYPE_COMP (23 | 0x0200) /* filter */ 778 779#define BIO_TYPE_DESCRIPTOR 0x0100 /* socket, fd, connect or accept */ 780#define BIO_TYPE_FILTER 0x0200 781#define BIO_TYPE_SOURCE_SINK 0x0400 782 783struct bio_method_st { 784 int type; 785 const char *name; 786 int (*bwrite)(BIO *, const char *, int); 787 int (*bread)(BIO *, char *, int); 788 /* TODO(fork): remove bputs. */ 789 int (*bputs)(BIO *, const char *); 790 int (*bgets)(BIO *, char *, int); 791 long (*ctrl)(BIO *, int, long, void *); 792 int (*create)(BIO *); 793 int (*destroy)(BIO *); 794 long (*callback_ctrl)(BIO *, int, bio_info_cb); 795}; 796 797struct bio_st { 798 const BIO_METHOD *method; 799 /* bio, mode, argp, argi, argl, ret */ 800 long (*callback)(BIO *, int, const char *, int, long, long); 801 char *cb_arg; /* first argument for the callback */ 802 803 /* init is non-zero if this |BIO| has been initialised. */ 804 int init; 805 /* shutdown is often used by specific |BIO_METHOD|s to determine whether 806 * they own some underlying resource. This flag can often by controlled by 807 * |BIO_set_close|. For example, whether an fd BIO closes the underlying fd 808 * when it, itself, is closed. */ 809 int shutdown; 810 int flags; 811 int retry_reason; 812 /* num is a BIO-specific value. For example, in fd BIOs it's used to store a 813 * file descriptor. */ 814 int num; 815 CRYPTO_refcount_t references; 816 void *ptr; 817 /* next_bio points to the next |BIO| in a chain. This |BIO| owns a reference 818 * to |next_bio|. */ 819 BIO *next_bio; /* used by filter BIOs */ 820 size_t num_read, num_write; 821}; 822 823#define BIO_C_SET_CONNECT 100 824#define BIO_C_DO_STATE_MACHINE 101 825#define BIO_C_SET_NBIO 102 826#define BIO_C_SET_PROXY_PARAM 103 827#define BIO_C_SET_FD 104 828#define BIO_C_GET_FD 105 829#define BIO_C_SET_FILE_PTR 106 830#define BIO_C_GET_FILE_PTR 107 831#define BIO_C_SET_FILENAME 108 832#define BIO_C_SET_SSL 109 833#define BIO_C_GET_SSL 110 834#define BIO_C_SET_MD 111 835#define BIO_C_GET_MD 112 836#define BIO_C_GET_CIPHER_STATUS 113 837#define BIO_C_SET_BUF_MEM 114 838#define BIO_C_GET_BUF_MEM_PTR 115 839#define BIO_C_GET_BUFF_NUM_LINES 116 840#define BIO_C_SET_BUFF_SIZE 117 841#define BIO_C_SET_ACCEPT 118 842#define BIO_C_SSL_MODE 119 843#define BIO_C_GET_MD_CTX 120 844#define BIO_C_GET_PROXY_PARAM 121 845#define BIO_C_SET_BUFF_READ_DATA 122 /* data to read first */ 846#define BIO_C_GET_ACCEPT 124 847#define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125 848#define BIO_C_GET_SSL_NUM_RENEGOTIATES 126 849#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127 850#define BIO_C_FILE_SEEK 128 851#define BIO_C_GET_CIPHER_CTX 129 852#define BIO_C_SET_BUF_MEM_EOF_RETURN 130/*return end of input value*/ 853#define BIO_C_SET_BIND_MODE 131 854#define BIO_C_GET_BIND_MODE 132 855#define BIO_C_FILE_TELL 133 856#define BIO_C_GET_SOCKS 134 857#define BIO_C_SET_SOCKS 135 858 859#define BIO_C_SET_WRITE_BUF_SIZE 136/* for BIO_s_bio */ 860#define BIO_C_GET_WRITE_BUF_SIZE 137 861#define BIO_C_GET_WRITE_GUARANTEE 140 862#define BIO_C_GET_READ_REQUEST 141 863#define BIO_C_SHUTDOWN_WR 142 864#define BIO_C_NREAD0 143 865#define BIO_C_NREAD 144 866#define BIO_C_NWRITE0 145 867#define BIO_C_NWRITE 146 868#define BIO_C_RESET_READ_REQUEST 147 869#define BIO_C_SET_MD_CTX 148 870 871#define BIO_C_SET_PREFIX 149 872#define BIO_C_GET_PREFIX 150 873#define BIO_C_SET_SUFFIX 151 874#define BIO_C_GET_SUFFIX 152 875 876#define BIO_C_SET_EX_ARG 153 877#define BIO_C_GET_EX_ARG 154 878 879 880#if defined(__cplusplus) 881} /* extern C */ 882#endif 883 884#define BIO_R_BAD_FOPEN_MODE 100 885#define BIO_R_BROKEN_PIPE 101 886#define BIO_R_CONNECT_ERROR 102 887#define BIO_R_ERROR_SETTING_NBIO 103 888#define BIO_R_INVALID_ARGUMENT 104 889#define BIO_R_IN_USE 105 890#define BIO_R_KEEPALIVE 106 891#define BIO_R_NBIO_CONNECT_ERROR 107 892#define BIO_R_NO_HOSTNAME_SPECIFIED 108 893#define BIO_R_NO_PORT_SPECIFIED 109 894#define BIO_R_NO_SUCH_FILE 110 895#define BIO_R_NULL_PARAMETER 111 896#define BIO_R_SYS_LIB 112 897#define BIO_R_UNABLE_TO_CREATE_SOCKET 113 898#define BIO_R_UNINITIALIZED 114 899#define BIO_R_UNSUPPORTED_METHOD 115 900#define BIO_R_WRITE_TO_READ_ONLY_BIO 116 901 902#endif /* OPENSSL_HEADER_BIO_H */ 903