1/* LzmaLib.h -- LZMA library interface
22013-01-18 : Igor Pavlov : Public domain */
3
4#ifndef __LZMA_LIB_H
5#define __LZMA_LIB_H
6
7#include "7zTypes.h"
8
9EXTERN_C_BEGIN
10
11#define MY_STDAPI int MY_STD_CALL
12
13#define LZMA_PROPS_SIZE 5
14
15/*
16RAM requirements for LZMA:
17  for compression:   (dictSize * 11.5 + 6 MB) + state_size
18  for decompression: dictSize + state_size
19    state_size = (4 + (1.5 << (lc + lp))) KB
20    by default (lc=3, lp=0), state_size = 16 KB.
21
22LZMA properties (5 bytes) format
23    Offset Size  Description
24      0     1    lc, lp and pb in encoded form.
25      1     4    dictSize (little endian).
26*/
27
28/*
29LzmaCompress
30------------
31
32outPropsSize -
33     In:  the pointer to the size of outProps buffer; *outPropsSize = LZMA_PROPS_SIZE = 5.
34     Out: the pointer to the size of written properties in outProps buffer; *outPropsSize = LZMA_PROPS_SIZE = 5.
35
36  LZMA Encoder will use defult values for any parameter, if it is
37  -1  for any from: level, loc, lp, pb, fb, numThreads
38   0  for dictSize
39
40level - compression level: 0 <= level <= 9;
41
42  level dictSize algo  fb
43    0:    16 KB   0    32
44    1:    64 KB   0    32
45    2:   256 KB   0    32
46    3:     1 MB   0    32
47    4:     4 MB   0    32
48    5:    16 MB   1    32
49    6:    32 MB   1    32
50    7+:   64 MB   1    64
51
52  The default value for "level" is 5.
53
54  algo = 0 means fast method
55  algo = 1 means normal method
56
57dictSize - The dictionary size in bytes. The maximum value is
58        128 MB = (1 << 27) bytes for 32-bit version
59          1 GB = (1 << 30) bytes for 64-bit version
60     The default value is 16 MB = (1 << 24) bytes.
61     It's recommended to use the dictionary that is larger than 4 KB and
62     that can be calculated as (1 << N) or (3 << N) sizes.
63
64lc - The number of literal context bits (high bits of previous literal).
65     It can be in the range from 0 to 8. The default value is 3.
66     Sometimes lc=4 gives the gain for big files.
67
68lp - The number of literal pos bits (low bits of current position for literals).
69     It can be in the range from 0 to 4. The default value is 0.
70     The lp switch is intended for periodical data when the period is equal to 2^lp.
71     For example, for 32-bit (4 bytes) periodical data you can use lp=2. Often it's
72     better to set lc=0, if you change lp switch.
73
74pb - The number of pos bits (low bits of current position).
75     It can be in the range from 0 to 4. The default value is 2.
76     The pb switch is intended for periodical data when the period is equal 2^pb.
77
78fb - Word size (the number of fast bytes).
79     It can be in the range from 5 to 273. The default value is 32.
80     Usually, a big number gives a little bit better compression ratio and
81     slower compression process.
82
83numThreads - The number of thereads. 1 or 2. The default value is 2.
84     Fast mode (algo = 0) can use only 1 thread.
85
86Out:
87  destLen  - processed output size
88Returns:
89  SZ_OK               - OK
90  SZ_ERROR_MEM        - Memory allocation error
91  SZ_ERROR_PARAM      - Incorrect paramater
92  SZ_ERROR_OUTPUT_EOF - output buffer overflow
93  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
94*/
95
96MY_STDAPI LzmaCompress(unsigned char *dest, size_t *destLen, const unsigned char *src, size_t srcLen,
97  unsigned char *outProps, size_t *outPropsSize, /* *outPropsSize must be = 5 */
98  int level,      /* 0 <= level <= 9, default = 5 */
99  unsigned dictSize,  /* default = (1 << 24) */
100  int lc,        /* 0 <= lc <= 8, default = 3  */
101  int lp,        /* 0 <= lp <= 4, default = 0  */
102  int pb,        /* 0 <= pb <= 4, default = 2  */
103  int fb,        /* 5 <= fb <= 273, default = 32 */
104  int numThreads /* 1 or 2, default = 2 */
105  );
106
107/*
108LzmaUncompress
109--------------
110In:
111  dest     - output data
112  destLen  - output data size
113  src      - input data
114  srcLen   - input data size
115Out:
116  destLen  - processed output size
117  srcLen   - processed input size
118Returns:
119  SZ_OK                - OK
120  SZ_ERROR_DATA        - Data error
121  SZ_ERROR_MEM         - Memory allocation arror
122  SZ_ERROR_UNSUPPORTED - Unsupported properties
123  SZ_ERROR_INPUT_EOF   - it needs more bytes in input buffer (src)
124*/
125
126MY_STDAPI LzmaUncompress(unsigned char *dest, size_t *destLen, const unsigned char *src, SizeT *srcLen,
127  const unsigned char *props, size_t propsSize);
128
129EXTERN_C_END
130
131#endif
132