| d80a401aed31d06f261efd19223cf55d1a2a8228 |
|
06-Nov-2015 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit f10ff62e4eda7917a8e28fe492fd98723a5e97c4
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|
| 68d0e3ed07847339aedfac8e02f50db68c702e52 |
|
29-Oct-2013 |
Dmitry Shmidt <dimitrysh@google.com> |
Cumulative patch from commit 32b62704fac6af74f60b2effb173474e11ff089d
32b6270 Android: Fix ARRAY_SIZE() compilation
7617388 Interworking: Report STATUS:sp_type even if domain is not configured
c20bc9d P2P: Remove compiler warning without CONFIG_IEEE80211N
ca9bc5b P2P: Add VHT support
20ea1ca P2P: Add VHT parameter to P2P operations
53cfad4 nl80211: Mark VHT 80 MHz channels
f2112b2 wpa_supplicant: Add CONFIG_IEEE80211AC
6b02335 hostapd: Mask out not-supported VHT capabilities
7f0303d hostapd: Verify VHT 160/80+80 MHz driver support
c781eb8 hostapd: Verify VHT capabilities are supported by driver
b29b012 Fix some VHT Capabilities definitions
7066a8e hostapd: Fix wrong VHT configuration capabilities flags
6651f1f nl80211: Use max tx power from regulatory domain
7ac3616 nl80211: Replace perror() and printf() calls with wpa_printf()
4d9fb08 WPS: Clear known_wps_freq in addition to after_wps
d20c340 Interworking: Clear known_wps_freq for network selection
f3be6ee tests: Allow test case descriptions to be written into database
1bd05d0 Interworking: Force normal scan for network selection
51e9f22 P2P: Add option to allow additional client channels
556b30d P2P: Add option to remove channels from GO use
e7ecab4 Use ARRAY_SIZE() macro
39044a7 Introduce ARRAY_SIZE() macro
2e94624 DFS: Handle radar event when CAC actived correctly
5eaf240 DFS: Fix overlapped() function to check only DFS channels
345276a DFS: Adjust center freq correctly for VHT20/VHT40
1dc17db DFS: Fix available channels list for VHT80
34068ac nl80211: Add debug prints on nl_recvmsgs() failure
10b8592 nl80211: Make eloop sockets non-blocking
5f65e9f nl80211: Abstract handling of sockets on eloop
e8d1168 nl80211: Register for IBSS auth frames before eloop
03610ad Clean up get_seqnum() use for IPN
29179b8 Stop ctrl_iface monitor send loop on reinit failure
a2a535f Remove unnecessary wpa_s->conf checks
3318376 Add explicit buffer length checks for p2p_build_wps_ie()
0f01201 Verify that readlink() did not truncate result
f5eb9da nl80211: Clean up if_add() for hostapd use
a288da6 OpenSSL: Fix memory leak on error path
6cb4f11 nl80211: Fix strerror() value in P2P Dev debug messages
35f8363 DFS: Add forgotten break statement
2f243b8 Remove os_strncpy()
24f051e Replace remainining strncpy() uses with strlcpy()
41c526f P2P: Fix snprintf buffer length for group ifname backup
Change-Id: I2e1506cb9219a5a37efbb2ae0dc180fb081c809f
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|
| 61d9df3e62aaa0e87ad05452fcb95142159a17b6 |
|
30-Aug-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Update to 29-Aug-2012 TOT
commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Fri Mar 2 22:31:04 2012 +0200
WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Change-Id: I9d63acce719b982c02e589bb59602382e82988c8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|
| c5ec7f57ead87efa365800228aa0b09a12d9e6c4 |
|
07-Mar-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.22 from BRCM
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|
| 1f69aa52ea2e0a73ac502565df8c666ee49cab6a |
|
25-Jan-2012 |
Dmitry Shmidt <dimitrysh@google.com> |
Update to new version 0.8.16 from BRCM
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|
| 8d520ff1dc2da35cdca849e982051b86468016d8 |
|
09-May-2011 |
Dmitry Shmidt <dimitrysh@google.com> |
wpa_supplicant: Initial Revision 0.8.X
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
/external/wpa_supplicant_8/src/drivers/linux_ioctl.c
|