1/** @file 2 Header file for boot maintenance module. 3 4Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR> 5This program and the accompanying materials 6are licensed and made available under the terms and conditions of the BSD License 7which accompanies this distribution. The full text of the license may be found at 8http://opensource.org/licenses/bsd-license.php 9 10THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 11WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 12 13**/ 14 15#ifndef _BOOT_MAINT_H_ 16#define _BOOT_MAINT_H_ 17 18#include "Bds.h" 19#include "BBSsupport.h" 20#include "FormGuid.h" 21#include "FrontPage.h" 22 23// 24// Constants which are variable names used to access variables 25// 26#define VAR_CON_OUT_MODE L"ConOutMode" 27 28// 29// String Contant 30// 31#define STR_FLOPPY L"Floppy Drive #%02x" 32#define STR_HARDDISK L"HardDisk Drive #%02x" 33#define STR_CDROM L"ATAPI CDROM Drive #%02x" 34#define STR_NET L"NET Drive #%02x" 35#define STR_BEV L"BEV Drive #%02x" 36#define STR_FLOPPY_HELP L"Select Floppy Drive #%02x" 37#define STR_HARDDISK_HELP L"Select HardDisk Drive #%02x" 38#define STR_CDROM_HELP L"Select ATAPI CDROM Drive #%02x" 39#define STR_NET_HELP L"NET Drive #%02x" 40#define STR_BEV_HELP L"BEV Drive #%02x" 41 42extern CHAR16 mFileExplorerStorageName[]; 43extern CHAR16 mBootMaintStorageName[]; 44// 45// These are the VFR compiler generated data representing our VFR data. 46// 47extern UINT8 BmBin[]; 48extern UINT8 FEBin[]; 49 50// 51// Below are the number of options in Baudrate, Databits, 52// Parity and Stopbits selection for serial ports. 53// 54#define BM_COM_ATTR_BUADRATE 19 55#define BM_COM_ATTR_DATABITS 4 56#define BM_COM_ATTR_PARITY 5 57#define BM_COM_ATTR_STOPBITS 3 58 59// 60// Callback function helper 61// 62#define BMM_CALLBACK_DATA_SIGNATURE SIGNATURE_32 ('C', 'b', 'c', 'k') 63#define BMM_CALLBACK_DATA_FROM_THIS(a) CR (a, BMM_CALLBACK_DATA, BmmConfigAccess, BMM_CALLBACK_DATA_SIGNATURE) 64 65#define FE_CALLBACK_DATA_FROM_THIS(a) CR (a, BMM_CALLBACK_DATA, FeConfigAccess, BMM_CALLBACK_DATA_SIGNATURE) 66 67// 68// Enumeration type definition 69// 70typedef enum _TYPE_OF_TERMINAL { 71 TerminalTypePcAnsi = 0, 72 TerminalTypeVt100, 73 TerminalTypeVt100Plus, 74 TerminalTypeVtUtf8 75} TYPE_OF_TERMINAL; 76 77typedef enum _FILE_EXPLORER_STATE { 78 FileExplorerStateInActive = 0, 79 FileExplorerStateBootFromFile, 80 FileExplorerStateAddBootOption, 81 FileExplorerStateAddDriverOptionState, 82 FileExplorerStateUnknown 83} FILE_EXPLORER_STATE; 84 85typedef enum _FILE_EXPLORER_DISPLAY_CONTEXT { 86 FileExplorerDisplayFileSystem, 87 FileExplorerDisplayDirectory, 88 FileExplorerDisplayUnknown 89} FILE_EXPLORER_DISPLAY_CONTEXT; 90 91// 92// All of the signatures that will be used in list structure 93// 94#define BM_MENU_OPTION_SIGNATURE SIGNATURE_32 ('m', 'e', 'n', 'u') 95#define BM_LOAD_OPTION_SIGNATURE SIGNATURE_32 ('l', 'o', 'a', 'd') 96#define BM_CONSOLE_OPTION_SIGNATURE SIGNATURE_32 ('c', 'n', 's', 'l') 97#define BM_FILE_OPTION_SIGNATURE SIGNATURE_32 ('f', 'i', 'l', 'e') 98#define BM_HANDLE_OPTION_SIGNATURE SIGNATURE_32 ('h', 'n', 'd', 'l') 99#define BM_TERMINAL_OPTION_SIGNATURE SIGNATURE_32 ('t', 'r', 'm', 'l') 100#define BM_MENU_ENTRY_SIGNATURE SIGNATURE_32 ('e', 'n', 't', 'r') 101 102#define BM_LOAD_CONTEXT_SELECT 0x0 103#define BM_CONSOLE_CONTEXT_SELECT 0x1 104#define BM_FILE_CONTEXT_SELECT 0x2 105#define BM_HANDLE_CONTEXT_SELECT 0x3 106#define BM_TERMINAL_CONTEXT_SELECT 0x5 107 108#define BM_CONSOLE_IN_CONTEXT_SELECT 0x6 109#define BM_CONSOLE_OUT_CONTEXT_SELECT 0x7 110#define BM_CONSOLE_ERR_CONTEXT_SELECT 0x8 111#define BM_LEGACY_DEV_CONTEXT_SELECT 0x9 112 113// 114// Buffer size for update data 115// 116#define UPDATE_DATA_SIZE 0x100000 117 118// 119// Namespace of callback keys used in display and file system navigation 120// 121#define MAX_BBS_OFFSET 0xE000 122#define NET_OPTION_OFFSET 0xD800 123#define BEV_OPTION_OFFSET 0xD000 124#define FD_OPTION_OFFSET 0xC000 125#define HD_OPTION_OFFSET 0xB000 126#define CD_OPTION_OFFSET 0xA000 127#define FILE_OPTION_GOTO_OFFSET 0xC000 128#define FILE_OPTION_OFFSET 0x8000 129#define FILE_OPTION_MASK 0x3FFF 130#define HANDLE_OPTION_OFFSET 0x7000 131#define CONSOLE_OPTION_OFFSET 0x6000 132#define TERMINAL_OPTION_OFFSET 0x5000 133#define CONFIG_OPTION_OFFSET 0x1200 134#define KEY_VALUE_OFFSET 0x1100 135#define FORM_ID_OFFSET 0x1000 136 137// 138// VarOffset that will be used to create question 139// all these values are computed from the structure 140// defined below 141// 142#define VAR_OFFSET(Field) ((UINT16) ((UINTN) &(((BMM_FAKE_NV_DATA *) 0)->Field))) 143 144// 145// Question Id of Zero is invalid, so add an offset to it 146// 147#define QUESTION_ID(Field) (VAR_OFFSET (Field) + CONFIG_OPTION_OFFSET) 148 149#define BOOT_TIME_OUT_VAR_OFFSET VAR_OFFSET (BootTimeOut) 150#define BOOT_NEXT_VAR_OFFSET VAR_OFFSET (BootNext) 151#define COM1_BAUD_RATE_VAR_OFFSET VAR_OFFSET (COM1BaudRate) 152#define COM1_DATA_RATE_VAR_OFFSET VAR_OFFSET (COM1DataRate) 153#define COM1_STOP_BITS_VAR_OFFSET VAR_OFFSET (COM1StopBits) 154#define COM1_PARITY_VAR_OFFSET VAR_OFFSET (COM1Parity) 155#define COM1_TERMINAL_VAR_OFFSET VAR_OFFSET (COM2TerminalType) 156#define COM2_BAUD_RATE_VAR_OFFSET VAR_OFFSET (COM2BaudRate) 157#define COM2_DATA_RATE_VAR_OFFSET VAR_OFFSET (COM2DataRate) 158#define COM2_STOP_BITS_VAR_OFFSET VAR_OFFSET (COM2StopBits) 159#define COM2_PARITY_VAR_OFFSET VAR_OFFSET (COM2Parity) 160#define COM2_TERMINAL_VAR_OFFSET VAR_OFFSET (COM2TerminalType) 161#define DRV_ADD_HANDLE_DESC_VAR_OFFSET VAR_OFFSET (DriverAddHandleDesc) 162#define DRV_ADD_ACTIVE_VAR_OFFSET VAR_OFFSET (DriverAddActive) 163#define DRV_ADD_RECON_VAR_OFFSET VAR_OFFSET (DriverAddForceReconnect) 164#define CON_IN_COM1_VAR_OFFSET VAR_OFFSET (ConsoleInputCOM1) 165#define CON_IN_COM2_VAR_OFFSET VAR_OFFSET (ConsoleInputCOM2) 166#define CON_OUT_COM1_VAR_OFFSET VAR_OFFSET (ConsoleOutputCOM1) 167#define CON_OUT_COM2_VAR_OFFSET VAR_OFFSET (ConsoleOutputCOM2) 168#define CON_ERR_COM1_VAR_OFFSET VAR_OFFSET (ConsoleErrorCOM1) 169#define CON_ERR_COM2_VAR_OFFSET VAR_OFFSET (ConsoleErrorCOM2) 170#define CON_MODE_VAR_OFFSET VAR_OFFSET (ConsoleOutMode) 171#define CON_IN_DEVICE_VAR_OFFSET VAR_OFFSET (ConsoleInCheck) 172#define CON_OUT_DEVICE_VAR_OFFSET VAR_OFFSET (ConsoleOutCheck) 173#define CON_ERR_DEVICE_VAR_OFFSET VAR_OFFSET (ConsoleErrCheck) 174#define BOOT_OPTION_ORDER_VAR_OFFSET VAR_OFFSET (BootOptionOrder) 175#define DRIVER_OPTION_ORDER_VAR_OFFSET VAR_OFFSET (DriverOptionOrder) 176#define BOOT_OPTION_DEL_VAR_OFFSET VAR_OFFSET (BootOptionDel) 177#define DRIVER_OPTION_DEL_VAR_OFFSET VAR_OFFSET (DriverOptionDel) 178#define DRIVER_ADD_OPTION_VAR_OFFSET VAR_OFFSET (DriverAddHandleOptionalData) 179#define COM_BAUD_RATE_VAR_OFFSET VAR_OFFSET (COMBaudRate) 180#define COM_DATA_RATE_VAR_OFFSET VAR_OFFSET (COMDataRate) 181#define COM_STOP_BITS_VAR_OFFSET VAR_OFFSET (COMStopBits) 182#define COM_PARITY_VAR_OFFSET VAR_OFFSET (COMParity) 183#define COM_TERMINAL_VAR_OFFSET VAR_OFFSET (COMTerminalType) 184#define COM_FLOWCONTROL_VAR_OFFSET VAR_OFFSET (COMFlowControl) 185#define LEGACY_FD_VAR_OFFSET VAR_OFFSET (LegacyFD) 186#define LEGACY_HD_VAR_OFFSET VAR_OFFSET (LegacyHD) 187#define LEGACY_CD_VAR_OFFSET VAR_OFFSET (LegacyCD) 188#define LEGACY_NET_VAR_OFFSET VAR_OFFSET (LegacyNET) 189#define LEGACY_BEV_VAR_OFFSET VAR_OFFSET (LegacyBEV) 190 191#define BOOT_TIME_OUT_QUESTION_ID QUESTION_ID (BootTimeOut) 192#define BOOT_NEXT_QUESTION_ID QUESTION_ID (BootNext) 193#define COM1_BAUD_RATE_QUESTION_ID QUESTION_ID (COM1BaudRate) 194#define COM1_DATA_RATE_QUESTION_ID QUESTION_ID (COM1DataRate) 195#define COM1_STOP_BITS_QUESTION_ID QUESTION_ID (COM1StopBits) 196#define COM1_PARITY_QUESTION_ID QUESTION_ID (COM1Parity) 197#define COM1_TERMINAL_QUESTION_ID QUESTION_ID (COM2TerminalType) 198#define COM2_BAUD_RATE_QUESTION_ID QUESTION_ID (COM2BaudRate) 199#define COM2_DATA_RATE_QUESTION_ID QUESTION_ID (COM2DataRate) 200#define COM2_STOP_BITS_QUESTION_ID QUESTION_ID (COM2StopBits) 201#define COM2_PARITY_QUESTION_ID QUESTION_ID (COM2Parity) 202#define COM2_TERMINAL_QUESTION_ID QUESTION_ID (COM2TerminalType) 203#define DRV_ADD_HANDLE_DESC_QUESTION_ID QUESTION_ID (DriverAddHandleDesc) 204#define DRV_ADD_ACTIVE_QUESTION_ID QUESTION_ID (DriverAddActive) 205#define DRV_ADD_RECON_QUESTION_ID QUESTION_ID (DriverAddForceReconnect) 206#define CON_IN_COM1_QUESTION_ID QUESTION_ID (ConsoleInputCOM1) 207#define CON_IN_COM2_QUESTION_ID QUESTION_ID (ConsoleInputCOM2) 208#define CON_OUT_COM1_QUESTION_ID QUESTION_ID (ConsoleOutputCOM1) 209#define CON_OUT_COM2_QUESTION_ID QUESTION_ID (ConsoleOutputCOM2) 210#define CON_ERR_COM1_QUESTION_ID QUESTION_ID (ConsoleErrorCOM1) 211#define CON_ERR_COM2_QUESTION_ID QUESTION_ID (ConsoleErrorCOM2) 212#define CON_MODE_QUESTION_ID QUESTION_ID (ConsoleOutMode) 213#define CON_IN_DEVICE_QUESTION_ID QUESTION_ID (ConsoleInCheck) 214#define CON_OUT_DEVICE_QUESTION_ID QUESTION_ID (ConsoleOutCheck) 215#define CON_ERR_DEVICE_QUESTION_ID QUESTION_ID (ConsoleErrCheck) 216#define BOOT_OPTION_ORDER_QUESTION_ID QUESTION_ID (BootOptionOrder) 217#define DRIVER_OPTION_ORDER_QUESTION_ID QUESTION_ID (DriverOptionOrder) 218#define BOOT_OPTION_DEL_QUESTION_ID QUESTION_ID (BootOptionDel) 219#define DRIVER_OPTION_DEL_QUESTION_ID QUESTION_ID (DriverOptionDel) 220#define DRIVER_ADD_OPTION_QUESTION_ID QUESTION_ID (DriverAddHandleOptionalData) 221#define COM_BAUD_RATE_QUESTION_ID QUESTION_ID (COMBaudRate) 222#define COM_DATA_RATE_QUESTION_ID QUESTION_ID (COMDataRate) 223#define COM_STOP_BITS_QUESTION_ID QUESTION_ID (COMStopBits) 224#define COM_PARITY_QUESTION_ID QUESTION_ID (COMParity) 225#define COM_TERMINAL_QUESTION_ID QUESTION_ID (COMTerminalType) 226#define COM_FLOWCONTROL_QUESTION_ID QUESTION_ID (COMFlowControl) 227#define LEGACY_FD_QUESTION_ID QUESTION_ID (LegacyFD) 228#define LEGACY_HD_QUESTION_ID QUESTION_ID (LegacyHD) 229#define LEGACY_CD_QUESTION_ID QUESTION_ID (LegacyCD) 230#define LEGACY_NET_QUESTION_ID QUESTION_ID (LegacyNET) 231#define LEGACY_BEV_QUESTION_ID QUESTION_ID (LegacyBEV) 232 233#define STRING_DEPOSITORY_NUMBER 8 234 235/// 236/// Serial Ports attributes, first one is the value for 237/// return from callback function, stringtoken is used to 238/// display the value properly 239/// 240typedef struct { 241 UINTN Value; 242 UINT16 StringToken; 243} COM_ATTR; 244 245typedef struct { 246 UINT64 BaudRate; 247 UINT8 DataBits; 248 UINT8 Parity; 249 UINT8 StopBits; 250 251 UINT8 BaudRateIndex; 252 UINT8 DataBitsIndex; 253 UINT8 ParityIndex; 254 UINT8 StopBitsIndex; 255 256 UINT8 FlowControl; 257 258 UINT8 IsConIn; 259 UINT8 IsConOut; 260 UINT8 IsStdErr; 261 UINT8 TerminalType; 262 263 EFI_DEVICE_PATH_PROTOCOL *DevicePath; 264} BM_TERMINAL_CONTEXT; 265 266typedef struct { 267 BOOLEAN IsBootNext; 268 BOOLEAN LoadOptionModified; 269 BOOLEAN Deleted; 270 271 BOOLEAN IsLegacy; 272 BOOLEAN IsActive; 273 BOOLEAN ForceReconnect; 274 UINTN OptionalDataSize; 275 276 UINTN LoadOptionSize; 277 UINT8 *LoadOption; 278 279 UINT32 Attributes; 280 UINT16 FilePathListLength; 281 UINT16 *Description; 282 EFI_DEVICE_PATH_PROTOCOL *FilePathList; 283 UINT8 *OptionalData; 284 285 UINT16 BbsIndex; 286} BM_LOAD_CONTEXT; 287 288typedef struct { 289 BBS_TABLE *BbsEntry; 290 UINT16 BbsIndex; 291 UINT16 BbsCount; 292 CHAR16 *Description; 293} BM_LEGACY_DEVICE_CONTEXT; 294 295typedef struct { 296 297 BOOLEAN IsActive; 298 299 BOOLEAN IsTerminal; 300 301 EFI_DEVICE_PATH_PROTOCOL *DevicePath; 302} BM_CONSOLE_CONTEXT; 303 304typedef struct { 305 UINTN Column; 306 UINTN Row; 307} CONSOLE_OUT_MODE; 308 309typedef struct { 310 EFI_HANDLE Handle; 311 EFI_DEVICE_PATH_PROTOCOL *DevicePath; 312 EFI_FILE_HANDLE FHandle; 313 UINT16 *FileName; 314 EFI_FILE_SYSTEM_VOLUME_LABEL *Info; 315 316 BOOLEAN IsRoot; 317 BOOLEAN IsDir; 318 BOOLEAN IsRemovableMedia; 319 BOOLEAN IsLoadFile; 320 BOOLEAN IsBootLegacy; 321} BM_FILE_CONTEXT; 322 323typedef struct { 324 EFI_HANDLE Handle; 325 EFI_DEVICE_PATH_PROTOCOL *DevicePath; 326} BM_HANDLE_CONTEXT; 327 328typedef struct { 329 UINTN Signature; 330 LIST_ENTRY Head; 331 UINTN MenuNumber; 332} BM_MENU_OPTION; 333 334typedef struct { 335 UINTN Signature; 336 LIST_ENTRY Link; 337 UINTN OptionNumber; 338 UINT16 *DisplayString; 339 UINT16 *HelpString; 340 EFI_STRING_ID DisplayStringToken; 341 EFI_STRING_ID HelpStringToken; 342 UINTN ContextSelection; 343 VOID *VariableContext; 344} BM_MENU_ENTRY; 345 346typedef struct { 347 // 348 // Shared callback data. 349 // 350 UINTN Signature; 351 352 BM_MENU_ENTRY *MenuEntry; 353 BM_HANDLE_CONTEXT *HandleContext; 354 BM_FILE_CONTEXT *FileContext; 355 BM_LOAD_CONTEXT *LoadContext; 356 BM_TERMINAL_CONTEXT *TerminalContext; 357 UINTN CurrentTerminal; 358 BBS_TYPE BbsType; 359 360 // 361 // BMM main formset callback data. 362 // 363 EFI_HII_HANDLE BmmHiiHandle; 364 EFI_HANDLE BmmDriverHandle; 365 EFI_HII_CONFIG_ACCESS_PROTOCOL BmmConfigAccess; 366 EFI_FORM_ID BmmCurrentPageId; 367 EFI_FORM_ID BmmPreviousPageId; 368 BOOLEAN BmmAskSaveOrNot; 369 BMM_FAKE_NV_DATA BmmFakeNvData; 370 BMM_FAKE_NV_DATA BmmOldFakeNVData; 371 372 // 373 // File explorer formset callback data. 374 // 375 EFI_HII_HANDLE FeHiiHandle; 376 EFI_HANDLE FeDriverHandle; 377 EFI_HII_CONFIG_ACCESS_PROTOCOL FeConfigAccess; 378 FILE_EXPLORER_STATE FeCurrentState; 379 FILE_EXPLORER_DISPLAY_CONTEXT FeDisplayContext; 380 FILE_EXPLORER_NV_DATA FeFakeNvData; 381} BMM_CALLBACK_DATA; 382 383typedef struct _STRING_LIST_NODE STRING_LIST_NODE; 384 385struct _STRING_LIST_NODE { 386 EFI_STRING_ID StringToken; 387 STRING_LIST_NODE *Next; 388}; 389 390typedef struct _STRING_DEPOSITORY { 391 UINTN TotalNodeNumber; 392 STRING_LIST_NODE *CurrentNode; 393 STRING_LIST_NODE *ListHead; 394} STRING_DEPOSITORY; 395 396// 397// #pragma pack() 398// 399// For initializing File System menu 400// 401 402/** 403 This function build the FsOptionMenu list which records all 404 available file system in the system. They includes all instances 405 of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL, all instances of EFI_LOAD_FILE_SYSTEM 406 and all type of legacy boot device. 407 408 @param CallbackData BMM context data 409 410 @retval EFI_SUCCESS Success find the file system 411 @retval EFI_OUT_OF_RESOURCES Can not create menu entry 412 413**/ 414EFI_STATUS 415BOpt_FindFileSystem ( 416 IN BMM_CALLBACK_DATA *CallbackData 417 ); 418 419/** 420 Find files under current directory 421 All files and sub-directories in current directory 422 will be stored in DirectoryMenu for future use. 423 424 @param CallbackData The BMM context data. 425 @param MenuEntry The Menu Entry. 426 427 @retval EFI_SUCCESS Get files from current dir successfully. 428 @return Other value if can't get files from current dir. 429 430**/ 431EFI_STATUS 432BOpt_FindFiles ( 433 IN BMM_CALLBACK_DATA *CallbackData, 434 IN BM_MENU_ENTRY *MenuEntry 435 ); 436 437/** 438 439 Find drivers that will be added as Driver#### variables from handles 440 in current system environment 441 All valid handles in the system except those consume SimpleFs, LoadFile 442 are stored in DriverMenu for future use. 443 444 @retval EFI_SUCCESS The function complets successfully. 445 @return Other value if failed to build the DriverMenu. 446 447**/ 448EFI_STATUS 449BOpt_FindDrivers ( 450 VOID 451 ); 452 453/** 454 455 Build the BootOptionMenu according to BootOrder Variable. 456 This Routine will access the Boot#### to get EFI_LOAD_OPTION. 457 458 @param CallbackData The BMM context data. 459 460 @return The number of the Var Boot####. 461 462**/ 463EFI_STATUS 464BOpt_GetBootOptions ( 465 IN BMM_CALLBACK_DATA *CallbackData 466 ); 467 468/** 469 470 Build up all DriverOptionMenu 471 472 @param CallbackData The BMM context data. 473 474 @return EFI_SUCESS The functin completes successfully. 475 @retval EFI_OUT_OF_RESOURCES Not enough memory to compete the operation. 476 477 478**/ 479EFI_STATUS 480BOpt_GetDriverOptions ( 481 IN BMM_CALLBACK_DATA *CallbackData 482 ); 483 484 485/** 486 Build the LegacyFDMenu LegacyHDMenu LegacyCDMenu according to LegacyBios.GetBbsInfo(). 487 488 @retval EFI_SUCCESS The function complete successfully. 489 @retval EFI_OUT_OF_RESOURCES No enough memory to complete this function. 490 491**/ 492EFI_STATUS 493BOpt_GetLegacyOptions ( 494 VOID 495 ); 496 497/** 498 Free out resouce allocated from Legacy Boot Options. 499 500**/ 501VOID 502BOpt_FreeLegacyOptions ( 503 VOID 504 ); 505 506/** 507 Free resources allocated in Allocate Rountine. 508 509 @param FreeMenu Menu to be freed 510 511**/ 512VOID 513BOpt_FreeMenu ( 514 BM_MENU_OPTION *FreeMenu 515 ); 516 517 518/** 519 520 Append file name to existing file name. 521 522 @param Str1 The existing file name 523 @param Str2 The file name to be appended 524 525 @return Allocate a new string to hold the appended result. 526 Caller is responsible to free the returned string. 527 528**/ 529CHAR16* 530BOpt_AppendFileName ( 531 IN CHAR16 *Str1, 532 IN CHAR16 *Str2 533 ); 534 535/** 536 537 Check whether current FileName point to a valid 538 Efi Image File. 539 540 @param FileName File need to be checked. 541 542 @retval TRUE Is Efi Image 543 @retval FALSE Not a valid Efi Image 544 545**/ 546BOOLEAN 547BOpt_IsEfiImageName ( 548 IN UINT16 *FileName 549 ); 550 551/** 552 553 Check whether current FileName point to a valid Efi Application 554 555 @param Dir Pointer to current Directory 556 @param FileName Pointer to current File name. 557 558 @retval TRUE Is a valid Efi Application 559 @retval FALSE not a valid Efi Application 560 561**/ 562BOOLEAN 563BOpt_IsEfiApp ( 564 IN EFI_FILE_HANDLE Dir, 565 IN UINT16 *FileName 566 ); 567 568/** 569 570 Get the Option Number that has not been allocated for use. 571 572 @param Type The type of Option. 573 574 @return The available Option Number. 575 576**/ 577UINT16 578BOpt_GetOptionNumber ( 579 CHAR16 *Type 580 ); 581 582/** 583 584 Get the Option Number for Boot#### that does not used. 585 586 @return The available Option Number. 587 588**/ 589UINT16 590BOpt_GetBootOptionNumber ( 591 VOID 592 ); 593 594/** 595 596Get the Option Number for Driver#### that does not used. 597 598@return The unused Option Number. 599 600**/ 601UINT16 602BOpt_GetDriverOptionNumber ( 603 VOID 604 ); 605 606/** 607 Create a menu entry give a Menu type. 608 609 @param MenuType The Menu type to be created. 610 611 612 @retval NULL If failed to create the menu. 613 @return The menu. 614 615**/ 616BM_MENU_ENTRY * 617BOpt_CreateMenuEntry ( 618 UINTN MenuType 619 ); 620 621/** 622 Free up all resource allocated for a BM_MENU_ENTRY. 623 624 @param MenuEntry A pointer to BM_MENU_ENTRY. 625 626**/ 627VOID 628BOpt_DestroyMenuEntry ( 629 BM_MENU_ENTRY *MenuEntry 630 ); 631 632/** 633 Get the Menu Entry from the list in Menu Entry List. 634 635 If MenuNumber is great or equal to the number of Menu 636 Entry in the list, then ASSERT. 637 638 @param MenuOption The Menu Entry List to read the menu entry. 639 @param MenuNumber The index of Menu Entry. 640 641 @return The Menu Entry. 642 643**/ 644BM_MENU_ENTRY * 645BOpt_GetMenuEntry ( 646 BM_MENU_OPTION *MenuOption, 647 UINTN MenuNumber 648 ); 649 650// 651// Locate all serial io devices for console 652// 653/** 654 Build a list containing all serial devices. 655 656 @retval EFI_SUCCESS The function complete successfully. 657 @retval EFI_UNSUPPORTED No serial ports present. 658 659**/ 660EFI_STATUS 661LocateSerialIo ( 662 VOID 663 ); 664 665// 666// Initializing Console menu 667// 668/** 669 Build up ConsoleOutMenu, ConsoleInpMenu and ConsoleErrMenu 670 671 @retval EFI_SUCCESS The function always complete successfully. 672 673**/ 674EFI_STATUS 675GetAllConsoles( 676 VOID 677 ); 678 679// 680// Get current mode information 681// 682/** 683 Get mode number according to column and row 684 685 @param CallbackData The BMM context data. 686**/ 687VOID 688GetConsoleOutMode ( 689 IN BMM_CALLBACK_DATA *CallbackData 690 ); 691 692// 693// Cleaning up console menu 694// 695/** 696 Free ConsoleOutMenu, ConsoleInpMenu and ConsoleErrMenu 697 698 @retval EFI_SUCCESS The function always complete successfully. 699**/ 700EFI_STATUS 701FreeAllConsoles ( 702 VOID 703 ); 704 705/** 706 Update the device path that describing a terminal device 707 based on the new BaudRate, Data Bits, parity and Stop Bits 708 set. 709 710 @param DevicePath The devicepath protocol instance wanted to be updated. 711 712**/ 713VOID 714ChangeVariableDevicePath ( 715 IN OUT EFI_DEVICE_PATH_PROTOCOL *DevicePath 716 ); 717 718/** 719 Update the multi-instance device path of Terminal Device based on 720 the global TerminalMenu. If ChangeTernimal is TRUE, the terminal 721 device path in the Terminal Device in TerminalMenu is also updated. 722 723 @param DevicePath The multi-instance device path. 724 @param ChangeTerminal TRUE, then device path in the Terminal Device 725 in TerminalMenu is also updated; FALSE, no update. 726 727 @return EFI_SUCCESS The function completes successfully. 728 729**/ 730EFI_STATUS 731ChangeTerminalDevicePath ( 732 IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath, 733 IN BOOLEAN ChangeTerminal 734 ); 735 736// 737// Variable operation by menu selection 738// 739/** 740 This function create a currently loaded Boot Option from 741 the BMM. It then appends this Boot Option to the end of 742 the "BootOrder" list. It also append this Boot Opotion to the end 743 of BootOptionMenu. 744 745 @param CallbackData The BMM context data. 746 @param NvRamMap The file explorer formset internal state. 747 748 @retval EFI_OUT_OF_RESOURCES If not enought memory to complete the operation. 749 @retval EFI_SUCCESS If function completes successfully. 750 751**/ 752EFI_STATUS 753Var_UpdateBootOption ( 754 IN BMM_CALLBACK_DATA *CallbackData, 755 IN FILE_EXPLORER_NV_DATA *NvRamMap 756 ); 757 758/** 759 Delete Boot Option that represent a Deleted state in BootOptionMenu. 760 After deleting this boot option, call Var_ChangeBootOrder to 761 make sure BootOrder is in valid state. 762 763 @retval EFI_SUCCESS If all boot load option EFI Variables corresponding to 764 BM_LOAD_CONTEXT marked for deletion is deleted 765 @return Others If failed to update the "BootOrder" variable after deletion. 766 767**/ 768EFI_STATUS 769Var_DelBootOption ( 770 VOID 771 ); 772 773/** 774 After any operation on Boot####, there will be a discrepancy in BootOrder. 775 Since some are missing but in BootOrder, while some are present but are 776 not reflected by BootOrder. Then a function rebuild BootOrder from 777 scratch by content from BootOptionMenu is needed. 778 779 @retval EFI_SUCCESS The boot order is updated successfully. 780 @return other than EFI_SUCCESS if failed to change the "BootOrder" EFI Variable. 781 782**/ 783EFI_STATUS 784Var_ChangeBootOrder ( 785 VOID 786 ); 787 788/** 789 This function create a currently loaded Drive Option from 790 the BMM. It then appends this Driver Option to the end of 791 the "DriverOrder" list. It append this Driver Opotion to the end 792 of DriverOptionMenu. 793 794 @param CallbackData The BMM context data. 795 @param HiiHandle The HII handle associated with the BMM formset. 796 @param DescriptionData The description of this driver option. 797 @param OptionalData The optional load option. 798 @param ForceReconnect If to force reconnect. 799 800 @retval EFI_OUT_OF_RESOURCES If not enought memory to complete the operation. 801 @retval EFI_SUCCESS If function completes successfully. 802 803**/ 804EFI_STATUS 805Var_UpdateDriverOption ( 806 IN BMM_CALLBACK_DATA *CallbackData, 807 IN EFI_HII_HANDLE HiiHandle, 808 IN UINT16 *DescriptionData, 809 IN UINT16 *OptionalData, 810 IN UINT8 ForceReconnect 811 ); 812 813/** 814 Delete Load Option that represent a Deleted state in BootOptionMenu. 815 After deleting this Driver option, call Var_ChangeDriverOrder to 816 make sure DriverOrder is in valid state. 817 818 @retval EFI_SUCCESS Load Option is successfully updated. 819 @return Other value than EFI_SUCCESS if failed to update "Driver Order" EFI 820 Variable. 821 822**/ 823EFI_STATUS 824Var_DelDriverOption ( 825 VOID 826 ); 827 828/** 829 After any operation on Driver####, there will be a discrepancy in 830 DriverOrder. Since some are missing but in DriverOrder, while some 831 are present but are not reflected by DriverOrder. Then a function 832 rebuild DriverOrder from scratch by content from DriverOptionMenu is 833 needed. 834 835 @retval EFI_SUCCESS The driver order is updated successfully. 836 @return other than EFI_SUCCESS if failed to set the "DriverOrder" EFI Variable. 837 838**/ 839EFI_STATUS 840Var_ChangeDriverOrder ( 841 VOID 842 ); 843 844/** 845 This function delete and build multi-instance device path ConIn 846 console device. 847 848 @retval EFI_SUCCESS The function complete successfully. 849 @return The EFI variable can not be saved. See gRT->SetVariable for detail return information. 850**/ 851EFI_STATUS 852Var_UpdateConsoleInpOption ( 853 VOID 854 ); 855 856/** 857 This function delete and build multi-instance device path ConOut console device. 858 859 @retval EFI_SUCCESS The function complete successfully. 860 @return The EFI variable can not be saved. See gRT->SetVariable for detail return information. 861**/ 862EFI_STATUS 863Var_UpdateConsoleOutOption ( 864 VOID 865 ); 866 867/** 868 This function delete and build multi-instance device path ErrOut console device. 869 870 @retval EFI_SUCCESS The function complete successfully. 871 @return The EFI variable can not be saved. See gRT->SetVariable for detail return information. 872**/ 873EFI_STATUS 874Var_UpdateErrorOutOption ( 875 VOID 876 ); 877 878/** 879 Update the device path of "ConOut", "ConIn" and "ErrOut" based on the new BaudRate, Data Bits, 880 parity and stop Bits set. 881 882**/ 883VOID 884Var_UpdateAllConsoleOption ( 885 VOID 886 ); 887 888/** 889 This function update the "BootNext" EFI Variable. If there is no "BootNex" specified in BMM, 890 this EFI Variable is deleted. 891 It also update the BMM context data specified the "BootNext" value. 892 893 @param CallbackData The BMM context data. 894 895 @retval EFI_SUCCESS The function complete successfully. 896 @return The EFI variable can not be saved. See gRT->SetVariable for detail return information. 897 898**/ 899EFI_STATUS 900Var_UpdateBootNext ( 901 IN BMM_CALLBACK_DATA *CallbackData 902 ); 903 904/** 905 This function update the "BootOrder" EFI Variable based on BMM Formset's NV map. It then refresh 906 BootOptionMenu with the new "BootOrder" list. 907 908 @param CallbackData The BMM context data. 909 910 @retval EFI_SUCCESS The function complete successfully. 911 @retval EFI_OUT_OF_RESOURCES Not enough memory to complete the function. 912 @return not The EFI variable can not be saved. See gRT->SetVariable for detail return information. 913 914**/ 915EFI_STATUS 916Var_UpdateBootOrder ( 917 IN BMM_CALLBACK_DATA *CallbackData 918 ); 919 920/** 921 This function update the "DriverOrder" EFI Variable based on 922 BMM Formset's NV map. It then refresh DriverOptionMenu 923 with the new "DriverOrder" list. 924 925 @param CallbackData The BMM context data. 926 927 @retval EFI_SUCCESS The function complete successfully. 928 @retval EFI_OUT_OF_RESOURCES Not enough memory to complete the function. 929 @return The EFI variable can not be saved. See gRT->SetVariable for detail return information. 930 931**/ 932EFI_STATUS 933Var_UpdateDriverOrder ( 934 IN BMM_CALLBACK_DATA *CallbackData 935 ); 936 937/** 938 Update the legacy BBS boot option. VAR_LEGACY_DEV_ORDER and gEfiLegacyDevOrderVariableGuid EFI Variable 939 is udpated with the new Legacy Boot order. The EFI Variable of "Boot####" and gEfiGlobalVariableGuid 940 is also updated. 941 942 @param CallbackData The context data for BMM. 943 @param FormId The form id. 944 945 @return EFI_SUCCESS The function completed successfully. 946 @retval EFI_NOT_FOUND If VAR_LEGACY_DEV_ORDER and gEfiLegacyDevOrderVariableGuid EFI Variable can not be found. 947 948**/ 949EFI_STATUS 950Var_UpdateBBSOption ( 951 IN BMM_CALLBACK_DATA *CallbackData, 952 IN EFI_FORM_ID FormId 953 ); 954 955/** 956 Update the Text Mode of Console. 957 958 @param CallbackData The context data for BMM. 959 960 @retval EFI_SUCCSS If the Text Mode of Console is updated. 961 @return Other value if the Text Mode of Console is not updated. 962 963**/ 964EFI_STATUS 965Var_UpdateConMode ( 966 IN BMM_CALLBACK_DATA *CallbackData 967 ); 968 969// 970// Following are page create and refresh functions 971// 972/** 973 Refresh the global UpdateData structure. 974 975**/ 976VOID 977RefreshUpdateData ( 978 VOID 979 ); 980 981/** 982 Clean up the dynamic opcode at label and form specified by 983 both LabelId. 984 985 @param LabelId It is both the Form ID and Label ID for 986 opcode deletion. 987 @param CallbackData The BMM context data. 988 989**/ 990VOID 991CleanUpPage ( 992 IN UINT16 LabelId, 993 IN BMM_CALLBACK_DATA *CallbackData 994 ); 995 996/** 997 Create a lit of boot option from global BootOptionMenu. It 998 allow user to delete the boot option. 999 1000 @param CallbackData The BMM context data. 1001 1002**/ 1003VOID 1004UpdateBootDelPage ( 1005 IN BMM_CALLBACK_DATA *CallbackData 1006 ); 1007 1008/** 1009 Create a lit of driver option from global DriverMenu. 1010 1011 @param CallbackData The BMM context data. 1012**/ 1013VOID 1014UpdateDrvAddHandlePage ( 1015 IN BMM_CALLBACK_DATA *CallbackData 1016 ); 1017 1018/** 1019 Create a lit of driver option from global DriverOptionMenu. It 1020 allow user to delete the driver option. 1021 1022 @param CallbackData The BMM context data. 1023**/ 1024VOID 1025UpdateDrvDelPage ( 1026 IN BMM_CALLBACK_DATA *CallbackData 1027 ); 1028 1029/** 1030 Prepare the page to allow user to add description for a Driver Option. 1031 1032 @param CallbackData The BMM context data. 1033**/ 1034VOID 1035UpdateDriverAddHandleDescPage ( 1036 IN BMM_CALLBACK_DATA *CallbackData 1037 ); 1038 1039/** 1040 Dispatch the correct update page function to call based on the UpdatePageId. 1041 1042 @param UpdatePageId The form ID. 1043 @param CallbackData The BMM context data. 1044**/ 1045VOID 1046UpdatePageBody ( 1047 IN UINT16 UpdatePageId, 1048 IN BMM_CALLBACK_DATA *CallbackData 1049 ); 1050 1051/** 1052 Create the dynamic page to allow user to set the "BootNext" vaule. 1053 1054 @param CallbackData The BMM context data. 1055**/ 1056VOID 1057UpdateBootNextPage ( 1058 IN BMM_CALLBACK_DATA *CallbackData 1059 ); 1060 1061/** 1062 Create the dynamic page to allow user to set the "TimeOut" vaule. 1063 1064 @param CallbackData The BMM context data. 1065**/ 1066VOID 1067UpdateTimeOutPage ( 1068 IN BMM_CALLBACK_DATA *CallbackData 1069 ); 1070 1071/** 1072 Create the dynamic page which allows user to set the property such as Baud Rate, Data Bits, 1073 Parity, Stop Bits, Terminal Type. 1074 1075 @param CallbackData The BMM context data. 1076**/ 1077VOID 1078UpdateTerminalPage ( 1079 IN BMM_CALLBACK_DATA *CallbackData 1080 ); 1081 1082/** 1083 Refresh the text mode page 1084 1085 @param CallbackData The BMM context data. 1086**/ 1087VOID 1088UpdateConModePage ( 1089 IN BMM_CALLBACK_DATA *CallbackData 1090 ); 1091 1092/** 1093 Create a list of Goto Opcode for all terminal devices logged 1094 by TerminaMenu. This list will be inserted to form FORM_CON_COM_SETUP_ID. 1095 1096 @param CallbackData The BMM context data. 1097**/ 1098VOID 1099UpdateConCOMPage ( 1100 IN BMM_CALLBACK_DATA *CallbackData 1101 ); 1102 1103/** 1104 Create a dynamic page so that Legacy Device boot order 1105 can be set for specified device type. 1106 1107 @param UpdatePageId The form ID. It also spefies the legacy device type. 1108 @param CallbackData The BMM context data. 1109**/ 1110VOID 1111UpdateSetLegacyDeviceOrderPage ( 1112 IN UINT16 UpdatePageId, 1113 IN BMM_CALLBACK_DATA *CallbackData 1114 ); 1115 1116 1117/** 1118 Function opens and returns a file handle to the root directory of a volume. 1119 1120 @param DeviceHandle A handle for a device 1121 @return A valid file handle or NULL is returned 1122**/ 1123EFI_FILE_HANDLE 1124EfiLibOpenRoot ( 1125 IN EFI_HANDLE DeviceHandle 1126 ); 1127 1128/** 1129 Function gets the file system information from an open file descriptor, 1130 and stores it in a buffer allocated from pool. 1131 1132 @param FHand The file handle. 1133 1134 @return A pointer to a buffer with file information. 1135 NULL is returned if failed to get Vaolume Label Info. 1136**/ 1137EFI_FILE_SYSTEM_VOLUME_LABEL * 1138EfiLibFileSystemVolumeLabelInfo ( 1139 IN EFI_FILE_HANDLE FHand 1140 ); 1141 1142/** 1143 1144 Function gets the file information from an open file descriptor, and stores it 1145 in a buffer allocated from pool. 1146 1147 @param FHand File Handle. 1148 1149 @return A pointer to a buffer with file information or NULL is returned 1150 1151**/ 1152EFI_FILE_INFO * 1153EfiLibFileInfo ( 1154 IN EFI_FILE_HANDLE FHand 1155 ); 1156 1157/** 1158 Adjusts the size of a previously allocated buffer. 1159 1160 @param OldPool A pointer to the buffer whose size is being adjusted. 1161 @param OldSize The size of the current buffer. 1162 @param NewSize The size of the new buffer. 1163 1164 @return The newly allocated buffer. if NULL, allocation failed. 1165 1166**/ 1167VOID* 1168EfiReallocatePool ( 1169 IN VOID *OldPool, 1170 IN UINTN OldSize, 1171 IN UINTN NewSize 1172 ); 1173 1174/** 1175 Function deletes the variable specified by VarName and VarGuid. 1176 1177 1178 @param VarName A Null-terminated Unicode string that is 1179 the name of the vendor's variable. 1180 1181 @param VarGuid A unique identifier for the vendor. 1182 1183 @retval EFI_SUCCESS The variable was found and removed 1184 @retval EFI_UNSUPPORTED The variable store was inaccessible 1185 @retval EFI_OUT_OF_RESOURCES The temporary buffer was not available 1186 @retval EFI_NOT_FOUND The variable was not found 1187 1188**/ 1189EFI_STATUS 1190EfiLibDeleteVariable ( 1191 IN CHAR16 *VarName, 1192 IN EFI_GUID *VarGuid 1193 ); 1194 1195/** 1196 Duplicate a string. 1197 1198 @param Src The source. 1199 1200 @return A new string which is duplicated copy of the source. 1201 @retval NULL If there is not enough memory. 1202 1203**/ 1204CHAR16 * 1205EfiStrDuplicate ( 1206 IN CHAR16 *Src 1207 ); 1208 1209/** 1210 Function is used to determine the number of device path instances 1211 that exist in a device path. 1212 1213 1214 @param DevicePath A pointer to a device path data structure. 1215 1216 @return This function counts and returns the number of device path instances 1217 in DevicePath. 1218 1219**/ 1220UINTN 1221EfiDevicePathInstanceCount ( 1222 IN EFI_DEVICE_PATH_PROTOCOL *DevicePath 1223 ); 1224 1225/** 1226 Create string tokens for a menu from its help strings and display strings 1227 1228 1229 @param CallbackData The BMM context data. 1230 @param HiiHandle Hii Handle of the package to be updated. 1231 @param MenuOption The Menu whose string tokens need to be created 1232 1233 @retval EFI_SUCCESS string tokens created successfully 1234 @retval others contain some errors 1235 1236**/ 1237EFI_STATUS 1238CreateMenuStringToken ( 1239 IN BMM_CALLBACK_DATA *CallbackData, 1240 IN EFI_HII_HANDLE HiiHandle, 1241 IN BM_MENU_OPTION *MenuOption 1242 ); 1243 1244/** 1245 Get a string from the Data Hub record based on 1246 a device path. 1247 1248 @param DevPath The device Path. 1249 1250 @return A string located from the Data Hub records based on 1251 the device path. 1252 @retval NULL If failed to get the String from Data Hub. 1253 1254**/ 1255UINT16 * 1256EfiLibStrFromDatahub ( 1257 IN EFI_DEVICE_PATH_PROTOCOL *DevPath 1258 ); 1259 1260/** 1261 Initialize the Boot Maintenance Utitliy. 1262 1263 @retval EFI_SUCCESS utility ended successfully. 1264 @retval others contain some errors. 1265 1266**/ 1267EFI_STATUS 1268InitializeBM ( 1269 VOID 1270 ); 1271 1272/** 1273 Start boot maintenance manager 1274 1275 @retval EFI_SUCCESS If BMM is invoked successfully. 1276 @return Other value if BMM return unsuccessfully. 1277 1278**/ 1279EFI_STATUS 1280BdsStartBootMaint ( 1281 VOID 1282 ); 1283 1284/** 1285 Intialize all the string depositories. 1286 1287**/ 1288VOID 1289InitializeStringDepository ( 1290 VOID 1291 ); 1292 1293/** 1294 Fetch a usable string node from the string depository and return the string token. 1295 1296 1297 @param CallbackData The BMM context data. 1298 @param StringDepository Pointer of the string depository. 1299 1300 @retval EFI_STRING_ID String token. 1301 1302**/ 1303EFI_STRING_ID 1304GetStringTokenFromDepository ( 1305 IN BMM_CALLBACK_DATA *CallbackData, 1306 IN STRING_DEPOSITORY *StringDepository 1307 ); 1308 1309/** 1310 Reclaim string depositories by moving the current node pointer to list head.. 1311**/ 1312VOID 1313ReclaimStringDepository ( 1314 VOID 1315 ); 1316 1317/** 1318 Release resource for all the string depositories. 1319 1320**/ 1321VOID 1322CleanUpStringDepository ( 1323 VOID 1324 ); 1325 1326/** 1327 Function handling request to apply changes for BMM pages. 1328 1329 @param Private Pointer to callback data buffer. 1330 @param CurrentFakeNVMap Pointer to buffer holding data of various values used by BMM 1331 @param FormId ID of the form which has sent the request to apply change. 1332 1333 @retval EFI_SUCCESS Change successfully applied. 1334 @retval Other Error occurs while trying to apply changes. 1335 1336**/ 1337EFI_STATUS 1338ApplyChangeHandler ( 1339 IN BMM_CALLBACK_DATA *Private, 1340 IN BMM_FAKE_NV_DATA *CurrentFakeNVMap, 1341 IN EFI_FORM_ID FormId 1342 ); 1343 1344/** 1345 Discard all changes done to the BMM pages such as Boot Order change, 1346 Driver order change. 1347 1348 @param Private The BMM context data. 1349 @param CurrentFakeNVMap The current Fack NV Map. 1350 1351**/ 1352VOID 1353DiscardChangeHandler ( 1354 IN BMM_CALLBACK_DATA *Private, 1355 IN BMM_FAKE_NV_DATA *CurrentFakeNVMap 1356 ); 1357 1358/** 1359 Dispatch the display to the next page based on NewPageId. 1360 1361 @param Private The BMM context data. 1362 @param NewPageId The original page ID. 1363 1364**/ 1365VOID 1366UpdatePageId ( 1367 BMM_CALLBACK_DATA *Private, 1368 UINT16 NewPageId 1369 ); 1370 1371/** 1372 Boot a file selected by user at File Expoloer of BMM. 1373 1374 @param FileContext The file context data, which contains the device path 1375 of the file to be boot from. 1376 1377 @retval EFI_SUCCESS The function completed successfull. 1378 @return Other value if the boot from the file fails. 1379 1380**/ 1381EFI_STATUS 1382BootThisFile ( 1383 IN BM_FILE_CONTEXT *FileContext 1384 ); 1385 1386/** 1387 Update the file explower page with the refershed file system. 1388 1389 1390 @param CallbackData BMM context data 1391 @param KeyValue Key value to identify the type of data to expect. 1392 1393 @retval TRUE Inform the caller to create a callback packet to exit file explorer. 1394 @retval FALSE Indicate that there is no need to exit file explorer. 1395 1396**/ 1397BOOLEAN 1398UpdateFileExplorer ( 1399 IN BMM_CALLBACK_DATA *CallbackData, 1400 IN UINT16 KeyValue 1401 ); 1402 1403/** 1404 This function processes the results of changes in configuration. 1405 When user select a interactive opcode, this callback will be triggered. 1406 Based on the Question(QuestionId) that triggers the callback, the corresponding 1407 actions is performed. It handles: 1408 1409 1) the addition of boot option. 1410 2) the addition of driver option. 1411 3) exit from file browser 1412 4) update of file content if a dir is selected. 1413 5) boot the file if a file is selected in "boot from file" 1414 1415 1416 @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL. 1417 @param Action Specifies the type of action taken by the browser. 1418 @param QuestionId A unique value which is sent to the original exporting driver 1419 so that it can identify the type of data to expect. 1420 @param Type The type of value for the question. 1421 @param Value A pointer to the data being sent to the original exporting driver. 1422 @param ActionRequest On return, points to the action requested by the callback function. 1423 1424 @retval EFI_SUCCESS The callback successfully handled the action. 1425 @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data. 1426 @retval EFI_DEVICE_ERROR The variable could not be saved. 1427 @retval EFI_UNSUPPORTED The specified Action is not supported by the callback. 1428 1429**/ 1430EFI_STATUS 1431EFIAPI 1432FileExplorerCallback ( 1433 IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This, 1434 IN EFI_BROWSER_ACTION Action, 1435 IN EFI_QUESTION_ID QuestionId, 1436 IN UINT8 Type, 1437 IN EFI_IFR_TYPE_VALUE *Value, 1438 OUT EFI_BROWSER_ACTION_REQUEST *ActionRequest 1439 ); 1440 1441/** 1442 This function applies changes in a driver's configuration. 1443 Input is a Configuration, which has the routing data for this 1444 driver followed by name / value configuration pairs. The driver 1445 must apply those pairs to its configurable storage. If the 1446 driver's configuration is stored in a linear block of data 1447 and the driver's name / value pairs are in <BlockConfig> 1448 format, it may use the ConfigToBlock helper function (above) to 1449 simplify the job. Currently not implemented. 1450 1451 @param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL. 1452 @param[in] Configuration A null-terminated Unicode string in 1453 <ConfigString> format. 1454 @param[out] Progress A pointer to a string filled in with the 1455 offset of the most recent '&' before the 1456 first failing name / value pair (or the 1457 beginn ing of the string if the failure 1458 is in the first name / value pair) or 1459 the terminating NULL if all was 1460 successful. 1461 1462 @retval EFI_SUCCESS The results have been distributed or are 1463 awaiting distribution. 1464 @retval EFI_OUT_OF_RESOURCES Not enough memory to store the 1465 parts of the results that must be 1466 stored awaiting possible future 1467 protocols. 1468 @retval EFI_INVALID_PARAMETERS Passing in a NULL for the 1469 Results parameter would result 1470 in this type of error. 1471 @retval EFI_NOT_FOUND Target for the specified routing data 1472 was not found. 1473**/ 1474EFI_STATUS 1475EFIAPI 1476FileExplorerRouteConfig ( 1477 IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This, 1478 IN CONST EFI_STRING Configuration, 1479 OUT EFI_STRING *Progress 1480 ); 1481 1482/** 1483 Dispatch BMM formset and FileExplorer formset. 1484 1485 1486 @param CallbackData The BMM context data. 1487 1488 @retval EFI_SUCCESS If function complete successfully. 1489 @return Other value if the Setup Browser process BMM's pages and 1490 return unsuccessfully. 1491 1492**/ 1493EFI_STATUS 1494FormSetDispatcher ( 1495 IN BMM_CALLBACK_DATA *CallbackData 1496 ); 1497 1498/** 1499 Function returns the value of the specified variable. 1500 1501 @param Name A Null-terminated Unicode string that is 1502 the name of the vendor's variable. 1503 @param VendorGuid A unique identifier for the vendor. 1504 1505 @return The payload of the variable. 1506 @retval NULL If the variable can't be read. 1507 1508**/ 1509VOID * 1510EfiLibGetVariable ( 1511 IN CHAR16 *Name, 1512 IN EFI_GUID *VendorGuid 1513 ); 1514 1515/** 1516 Get option number according to Boot#### and BootOrder variable. 1517 The value is saved as #### + 1. 1518 1519 @param CallbackData The BMM context data. 1520**/ 1521VOID 1522GetBootOrder ( 1523 IN BMM_CALLBACK_DATA *CallbackData 1524 ); 1525 1526/** 1527 Get driver option order from globalc DriverOptionMenu. 1528 1529 @param CallbackData The BMM context data. 1530 1531**/ 1532VOID 1533GetDriverOrder ( 1534 IN BMM_CALLBACK_DATA *CallbackData 1535 ); 1536 1537/** 1538 Intall BootMaint and FileExplorer HiiPackages. 1539 1540**/ 1541EFI_STATUS 1542InitBMPackage ( 1543 VOID 1544 ); 1545 1546/** 1547 Remvoe the intalled BootMaint and FileExplorer HiiPackages. 1548 1549**/ 1550VOID 1551FreeBMPackage ( 1552 VOID 1553 ); 1554 1555/** 1556 According to LegacyDevOrder variable to get legacy FD\HD\CD\NET\BEV 1557 devices list . 1558 1559 @param CallbackData The BMM context data. 1560**/ 1561VOID 1562GetLegacyDeviceOrder ( 1563 IN BMM_CALLBACK_DATA *CallbackData 1564 ); 1565 1566/** 1567 1568 Initialize console input device check box to ConsoleInCheck[MAX_MENU_NUMBER] 1569 in BMM_FAKE_NV_DATA structure. 1570 1571 @param CallbackData The BMM context data. 1572 1573**/ 1574VOID 1575GetConsoleInCheck ( 1576 IN BMM_CALLBACK_DATA *CallbackData 1577 ); 1578 1579/** 1580 1581 Initialize console output device check box to ConsoleOutCheck[MAX_MENU_NUMBER] 1582 in BMM_FAKE_NV_DATA structure. 1583 1584 @param CallbackData The BMM context data. 1585 1586**/ 1587VOID 1588GetConsoleOutCheck ( 1589 IN BMM_CALLBACK_DATA *CallbackData 1590 ); 1591 1592/** 1593 1594 Initialize standard error output device check box to ConsoleErrCheck[MAX_MENU_NUMBER] 1595 in BMM_FAKE_NV_DATA structure. 1596 1597 @param CallbackData The BMM context data. 1598 1599**/ 1600VOID 1601GetConsoleErrCheck ( 1602 IN BMM_CALLBACK_DATA *CallbackData 1603 ); 1604 1605/** 1606 1607 Initialize terminal attributes (baudrate, data rate, stop bits, parity and terminal type) 1608 to BMM_FAKE_NV_DATA structure. 1609 1610 @param CallbackData The BMM context data. 1611 1612**/ 1613VOID 1614GetTerminalAttribute ( 1615 IN BMM_CALLBACK_DATA *CallbackData 1616 ); 1617 1618/** 1619 1620 Find the first instance of this Protocol 1621 in the system and return it's interface. 1622 1623 1624 @param ProtocolGuid Provides the protocol to search for 1625 @param Interface On return, a pointer to the first interface 1626 that matches ProtocolGuid 1627 1628 @retval EFI_SUCCESS A protocol instance matching ProtocolGuid was found 1629 @retval EFI_NOT_FOUND No protocol instances were found that match ProtocolGuid 1630 1631**/ 1632EFI_STATUS 1633EfiLibLocateProtocol ( 1634 IN EFI_GUID *ProtocolGuid, 1635 OUT VOID **Interface 1636 ); 1637 1638// 1639// Global variable in this program (defined in data.c) 1640// 1641extern BM_MENU_OPTION BootOptionMenu; 1642extern BM_MENU_OPTION DriverOptionMenu; 1643extern BM_MENU_OPTION FsOptionMenu; 1644extern BM_MENU_OPTION ConsoleInpMenu; 1645extern BM_MENU_OPTION ConsoleOutMenu; 1646extern BM_MENU_OPTION ConsoleErrMenu; 1647extern BM_MENU_OPTION DirectoryMenu; 1648extern BM_MENU_OPTION DriverMenu; 1649extern BM_MENU_OPTION TerminalMenu; 1650extern BM_MENU_OPTION LegacyFDMenu; 1651extern BM_MENU_OPTION LegacyHDMenu; 1652extern BM_MENU_OPTION LegacyCDMenu; 1653extern BM_MENU_OPTION LegacyNETMenu; 1654extern BM_MENU_OPTION LegacyBEVMenu; 1655extern UINT16 TerminalType[]; 1656extern COM_ATTR BaudRateList[19]; 1657extern COM_ATTR DataBitsList[4]; 1658extern COM_ATTR ParityList[5]; 1659extern COM_ATTR StopBitsList[3]; 1660extern EFI_GUID TerminalTypeGuid[4]; 1661extern STRING_DEPOSITORY *FileOptionStrDepository; 1662extern STRING_DEPOSITORY *ConsoleOptionStrDepository; 1663extern STRING_DEPOSITORY *BootOptionStrDepository; 1664extern STRING_DEPOSITORY *BootOptionHelpStrDepository; 1665extern STRING_DEPOSITORY *DriverOptionStrDepository; 1666extern STRING_DEPOSITORY *DriverOptionHelpStrDepository; 1667extern STRING_DEPOSITORY *TerminalStrDepository; 1668extern EFI_DEVICE_PATH_PROTOCOL EndDevicePath[]; 1669extern UINT16 mFlowControlType[2]; 1670extern UINT32 mFlowControlValue[2]; 1671// 1672// Shared IFR form update data 1673// 1674extern VOID *mStartOpCodeHandle; 1675extern VOID *mEndOpCodeHandle; 1676extern EFI_IFR_GUID_LABEL *mStartLabel; 1677extern EFI_IFR_GUID_LABEL *mEndLabel; 1678 1679#endif 1680