1/**************************************************************************** 2 **************************************************************************** 3 *** 4 *** This header was automatically generated from a Linux kernel header 5 *** of the same name, to make information necessary for userspace to 6 *** call into the kernel available to libc. It contains only constants, 7 *** structures, and macros generated from the original header, and thus, 8 *** contains no copyrightable information. 9 *** 10 **************************************************************************** 11 ****************************************************************************/ 12#ifndef _QIC117_H 13#define _QIC117_H 14 15typedef enum { 16 QIC_NO_COMMAND = 0, 17 QIC_RESET = 1, 18 QIC_REPORT_NEXT_BIT = 2, 19 QIC_PAUSE = 3, 20 QIC_MICRO_STEP_PAUSE = 4, 21 QIC_ALTERNATE_TIMEOUT = 5, 22 QIC_REPORT_DRIVE_STATUS = 6, 23 QIC_REPORT_ERROR_CODE = 7, 24 QIC_REPORT_DRIVE_CONFIGURATION = 8, 25 QIC_REPORT_ROM_VERSION = 9, 26 QIC_LOGICAL_FORWARD = 10, 27 QIC_PHYSICAL_REVERSE = 11, 28 QIC_PHYSICAL_FORWARD = 12, 29 QIC_SEEK_HEAD_TO_TRACK = 13, 30 QIC_SEEK_LOAD_POINT = 14, 31 QIC_ENTER_FORMAT_MODE = 15, 32 QIC_WRITE_REFERENCE_BURST = 16, 33 QIC_ENTER_VERIFY_MODE = 17, 34 QIC_STOP_TAPE = 18, 35 36 QIC_MICRO_STEP_HEAD_UP = 21, 37 QIC_MICRO_STEP_HEAD_DOWN = 22, 38 QIC_SOFT_SELECT = 23, 39 QIC_SOFT_DESELECT = 24, 40 QIC_SKIP_REVERSE = 25, 41 QIC_SKIP_FORWARD = 26, 42 QIC_SELECT_RATE = 27, 43 44 QIC_ENTER_DIAGNOSTIC_1 = 28, 45 QIC_ENTER_DIAGNOSTIC_2 = 29, 46 QIC_ENTER_PRIMARY_MODE = 30, 47 48 QIC_REPORT_VENDOR_ID = 32, 49 QIC_REPORT_TAPE_STATUS = 33, 50 QIC_SKIP_EXTENDED_REVERSE = 34, 51 QIC_SKIP_EXTENDED_FORWARD = 35, 52 QIC_CALIBRATE_TAPE_LENGTH = 36, 53 QIC_REPORT_FORMAT_SEGMENTS = 37, 54 QIC_SET_FORMAT_SEGMENTS = 38, 55 56 QIC_PHANTOM_SELECT = 46, 57 QIC_PHANTOM_DESELECT = 47 58} qic117_cmd_t; 59 60typedef enum { 61 discretional = 0, required, ccs1, ccs2 62} qic_compatibility; 63 64typedef enum { 65 unused, mode, motion, report 66} command_types; 67 68struct qic117_command_table { 69 char *name; 70 __u8 mask; 71 __u8 state; 72 __u8 cmd_type; 73 __u8 non_intr; 74 __u8 level; 75}; 76 77#define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, } 78 79#define QIC_STATUS_READY 0x01 80#define QIC_STATUS_ERROR 0x02 81#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 82#define QIC_STATUS_WRITE_PROTECT 0x08 83#define QIC_STATUS_NEW_CARTRIDGE 0x10 84#define QIC_STATUS_REFERENCED 0x20 85#define QIC_STATUS_AT_BOT 0x40 86#define QIC_STATUS_AT_EOT 0x80 87 88#define QIC_CONFIG_RATE_MASK 0x18 89#define QIC_CONFIG_RATE_SHIFT 3 90#define QIC_CONFIG_RATE_250 0 91#define QIC_CONFIG_RATE_500 2 92#define QIC_CONFIG_RATE_1000 3 93#define QIC_CONFIG_RATE_2000 1 94#define QIC_CONFIG_RATE_4000 0 95 96#define QIC_CONFIG_LONG 0x40 97#define QIC_CONFIG_80 0x80 98 99#define QIC_TAPE_STD_MASK 0x0f 100#define QIC_TAPE_QIC40 0x01 101#define QIC_TAPE_QIC80 0x02 102#define QIC_TAPE_QIC3020 0x03 103#define QIC_TAPE_QIC3010 0x04 104 105#define QIC_TAPE_LEN_MASK 0x70 106#define QIC_TAPE_205FT 0x10 107#define QIC_TAPE_307FT 0x20 108#define QIC_TAPE_VARIABLE 0x30 109#define QIC_TAPE_1100FT 0x40 110#define QIC_TAPE_FLEX 0x60 111 112#define QIC_TAPE_WIDE 0x80 113 114#define QIC_TOP_TAPE_LEN 1500 115 116typedef struct { 117 char *message; 118 unsigned int fatal:1; 119} ftape_error; 120 121#define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, } 122 123#endif 124